Purification Equipment
Filter
Showing 151–180 of 361 results
| Brand | EYELA (Tokyo Rikakikai) |
|---|---|
| Origin | Japan |
| Model | N-1100V-W/WD |
| Evaporation Capacity | Max. 25 mL/min |
| Rotational Speed | 20–180 rpm |
| Ultimate Vacuum | < 399.9 Pa |
| Bath Temperature Range | Room Temp +5°C to 90°C |
| Heating Control Accuracy | ±0.5°C (typical for PID-controlled water/oil bath) |
| Cooling Surface Area | 0.146 m² |
| Evaporating Flask Capacity | 3 L |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-1200AV / N-1200AVF-W / N-1200AVF-WD |
| Rotational Speed | 5–280 rpm |
| Max. Evaporation Rate | 25 mL/min |
| Ultimate Vacuum | < 399.9 Pa (≤ 3 mmHg) |
| Water Bath Temp. Range | RT + 5°C to 90°C |
| Oil/Water Dual Bath Temp. Range | RT + 5°C to 180°C |
| Temp. Control Accuracy | ±1.5°C (water) / ±3°C (oil) |
| Temperature Control Method | Microcomputer-based ON-OFF control |
| Heating Power | 1.05 kW |
| Condenser Type | Vertical double-coil |
| Cooling Surface Area | 0.146 m² |
| Flask Capacity | Standard 1 L (up to 3 L compatible) |
| Bath Dimensions & Volume | Ø240 × 120 mm (shallow zone Ø160 mm), ~5.4 L |
| Lift Stroke | 100 mm (manual rack) + 130 mm (handle extension) |
| Overall Dimensions & Weight | 595 W × 445 D × 700 H mm, 16.5 kg |
| Safety Features | Thermal fuse, dry-run prevention sensor |
| Sealing Material | PTFE vacuum seal |
| Condenser & Flask Joints | Standard taper 29/38 (flask), S35/20 (receiving flask) |
| Shaft | Short-type glass rotary shaft, ID 18 mm × L 178 mm |
| Quick-Connect Fitting | Integrated push-fit interface for chiller hose coupling |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1210BS-WB |
| Capacity | 5.4 L |
| Ultimate Vacuum | 10 hPa (≈7.5 Torr) |
| Rotation Speed | 5–280 rpm |
| Bath Temperature Range | Ambient to 180 °C (±1.5 °C for water, ±3 °C for oil) |
| Evaporation Rate | Max. 25 mL/min (water) |
| Condenser Cooling Area | 0.146 m² |
| Bath Dimensions | Ø240 × 120 mm (H) |
| Power | 1.2 kVA |
| Weight | 18 kg |
| Electrical Supply | AC 220 V, 50 Hz |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1210BS-WB |
| Bath Temperature Range | Room Temp. to 180 °C (±1.5 °C in water, ±3 °C in oil) |
| Rotational Speed Range | 5–280 rpm |
| Evaporation Rate (Water) | Up to 25 mL/min |
| Bath Capacity | ~5.4 L |
| Bath Dimensions (ID) | 240 mm × 120 mm H |
| Bath Material | Aluminum with PTFE Coating |
| Heating Power | 1 kW |
| Vertical Travel | Motorized lift 110 mm + manual extension 130 mm |
| Condenser Type | Tilted dual-spiral coil |
| Flask Capacity | 1–3 L (evaporating), 1 L (receiving) |
| Vacuum Seal | PTFE sealing gasket |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Supply | AC 220 V, 5.5 A, 1.2 kVA, 50 Hz |
| Operating Ambient | 5–35 °C |
| Dimensions (W×D×H) | 729 × 433 × 520 mm (750 mm with lift extended) |
| Weight | 18 kg |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300D |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Motor | Brushless DC |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Input | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Dimensions (W×D×H) | 578×352×645 mm (N-1300D-W) / 565×352×645 mm (N-1300D-WB) |
| Weight | 12.7 kg (N-1300D-W) / 13.3 kg (N-1300D-WB) |
| Bath Capacity | 4.3 L (SB-1300, stainless steel SUS304) / 5.4 L (OSB-2200, aluminum with PTFE coating) |
| Sealing | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300S |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Motor | Brushless DC |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Supply | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Dimensions (W×D×H) | 736×352×504 mm (N-1300S-W) / 724×352×504 mm (N-1300S-WB) |
| Weight | 12.1 kg (N-1300S-W) / 12.7 kg (N-1300S-WB) |
| Bath Capacity | 4.3 L (SB-1300, stainless steel SUS304) / 5.4 L (OSB-2200, aluminum with PTFE coating) |
| Sealing | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300V |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Power Input | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Heating Power | 1.3 kW |
| Bath Dimensions (SB-1300) | Ø220 × 120 mm H, ~4.3 L (SUS304) |
| Bath Dimensions (OSB-2200) | Ø240 × 120 mm H, ~5.4 L (aluminum with PTFE coating) |
| Weight | 12.8 kg (N-1300V-W) / 13.4 kg (N-1300V-WB) |
| Overall Dimensions | 543 × 352 × 823 mm (W×D×H) |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Sealing Material | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-2100 |
| Bath Temperature Range | Room Temp +5 to 90°C |
| Bath Temp Control Accuracy | ±1°C |
| Rotation Speed | 5–160 rpm |
| Max Evaporation Rate | 43 mL/min (F-type), 23 mL/min (U/R-type) |
| Ultimate Vacuum | 399.9 Pa |
| Condenser Surface Area | 0.25 m² |
| Lift Stroke | 160 mm |
| Bath Dimensions & Capacity | Ø280 × 144 mm, ~8.5 L |
| Flask Capacity | 5 L (round-bottom), 3 L (receiving flask) |
| Joint Standard | S35/20 spherical ground glass |
| Weight | ~29 kg |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-3100 |
| Rotational Speed Range | 10–140 rpm |
| Max. Evaporation Rate | 3.5 L/h (water) |
| Ultimate Vacuum | 2.6 hPa |
| Bath Temperature Range | Ambient +10°C to 180°C (±1°C in water, ±3°C in oil) |
| Heating Power | 3.5 kW |
| Temperature Control | PID |
| Vacuum Control Modes | Setpoint, Auto, Program, Pressure-Step |
| Bath Dimensions & Capacity | Φ360 × 200 mm, ~20 L |
| Bath Material | SUS304 stainless steel |
| Condenser | Vertical triple-coil, 0.5 m² cooling surface |
| Flask Capacity | 10 L spherical (neck Ø100 mm) |
| Collection Flask | 5 L spherical with drain valve |
| Sealing | PTFE mechanical seal |
| Lift Stroke | 145 mm (motorized) |
| Motor | Induction type, 60 W |
| Cooling/Inlet Port Diameter | 16 mm (×2), Solenoid Valve Port: 13 mm |
| Ambient Operating Range | 5–35°C |
| External Dimensions (W×D×H) | 930 × 480 × 1890 mm |
| Weight | ~96 kg |
| Power Supply | AC 200 V, 19 A, 3.8 kVA |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | TVE-1100A / TVE-1100B |
| Temperature Range | TVE-1100A: RT + 5°C to 60°C |
| TVE-1100B | RT + 5°C to 40°C |
| Temp. Control Accuracy | ±0.2°C |
| Oscillation Speed | 100–1100 rpm |
| Amplitude | 3 mm |
| Gas Contact Materials | PTFE, Polypropylene, Viton, Silicone Rubber, Borosilicate Glass |
| Vacuum & Vent Ports | OD 10 mm |
| Drain Tube | OD 12 mm |
| Sample Vessel Compatibility | TVE-1100A — Centrifuge Tubes & Test Tubes (Straight, Flip-top, Screw-cap, Standard Tapered Joint) |
| Operating Ambient | 5–35°C |
| Dimensions (W×D×H) | 300 × 500 × 670 mm |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | TVE-1100A / TVE-1100B |
| Concentration Principle | Vortex-assisted vacuum evaporation |
| Temperature Range | Ambient +5°C to 60°C (TVE-1100A), Ambient +5°C to 40°C (TVE-1100B) |
| Temperature Accuracy | ±0.2°C |
| Oscillation Speed | 100–1100 rpm (50/60 Hz) |
| Oscillation Amplitude | 3 mm |
| Gas Line Materials | PTFE, Polypropylene (PP), Viton®, Silicone Rubber, Borosilicate Glass |
| Vacuum & Vent Port OD | 10 mm |
| Drain Tube OD | 12 mm |
| Compatible Vessels | Centrifuge tubes (29 mm OD × 110 mm), Standard test tubes (Φ12–Φ18 mm × 100–180 mm), Straight-, flip-, screw-, and standard ground-glass joint formats |
| Operating Ambient | 5–35°C |
| Dimensions (W×D×H) | 300 × 500 × 670 mm |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | VTX-2000 / VTX-2500 |
| Instrument Type | Automated Quantitative Vacuum Concentrator |
| Temperature Range | +10–80°C |
| Temperature Control Accuracy | ±1°C |
| Sample Capacity | 250 mL × 6 positions |
| Rotational Speed | 20–350 rpm |
| Ultimate Vacuum | 7 hPa (5 mmHg) |
| Cooling Water & Vacuum Port ID | 10 mm |
| Dimensions (W×D×H) | 670 × 570 × 710 mm |
| Weight | 35 kg |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Filtration System |
| Sample Processing | Waste Water Treatment |
| Filter Types Supported | Activated Carbon Filter, Catalyst Filter, Bag Filter, High-Voltage Insulating Oil Filter, Depth Filter, Sterile Filter, Corrosion-Resistant Filter |
| Brand | JIQUN |
|---|---|
| Origin | Jiangsu, China |
| Model | JQ-HGBQ-1005 |
| Pump Pressure | Up to 72 MPa |
| Flow Rate Range | Up to 10 mL/min |
| UV-Vis Detector Data Acquisition Rate | 100 Hz |
| Linear Range | >2.5 AU |
| Fraction Collector Modes | Time-based, Peak-triggered, Drop-counting |
| Autosampler Precision | 0.3% RSD |
| Carryover | <0.0025% |
| Compliance | Designed for GLP-compliant laboratories |
| Software | PC-controlled with graphical sample map interface |
| Column Compatibility | Standard GPC/SEC columns (e.g., Styragel, PLgel, OHpak) |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GelMaster-1000 |
| Flow Rate Range | 0–10 mL/min |
| UV Detection Wavelength | 254 nm |
| Column Dimensions | 25 × 400 mm |
| Packing Material | Bio-Beads S-X3, 200–400 mesh |
| Solvent System | Ethyl Acetate–Cyclohexane (1:1 v/v) |
| Standard Loop Volume | 5 mL |
| Pump Type | Precision Plunger Pump |
| Detector Type | Single-Wavelength UV Detector |
| Sample Introduction | Manual Injection Valve with Solvent Recovery Three-Way Valve |
| Compliance | AOAC 984.21, EPA SW-846 Method 3640A, FDA 2905A, EN 12393, EN 1528, S-19, S35L00.00-34 |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GelMaster-2000 |
| Flow Rate Range | 0–10 mL/min |
| Maximum Pressure | Not Specified |
| Flow Stability | High (Dual-Piston Pump Architecture) |
| UV Detector Wavelength Range | 190–800 nm |
| GPC Column | 20 × 300 mm, Bio-Beads S-X3 (200–400 mesh), Eluent: Ethyl Acetate/Cyclohexane (3:7 v/v) |
| Fraction Collector | Standard 160-position rack for 20 mL tubes |
| Compliance | AOAC 984.21, EPA SW-846 Method 3640A, FDA 2905A, EN 12393, EN 1528 |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GelMaster-3000 |
| Flow Rate | 0–10 mL/min |
| Max Pressure | 1 psi |
| Flow Stability | ±0.5% RSD |
| Auto-sampler Volume | 5 mL (standard loop, customizable) |
| Auto-sampler Capacity | 160 × 20 mL tubes (standard) |
| UV Detection Range | 190–800 nm |
| Column Dimensions | 20 × 300 mm |
| Packing Material | Bio-Beads S-X3 (200–400 mesh) |
| Solvent System | Ethyl Acetate/Cyclohexane (3:7 v/v) |
| Fraction Collector Options | 20 mL (160-position), 80 mL (40-position), 150 mL (12-position), 250–300 mL (8-position) |
| Solvent Recovery Valve | Integrated three-way valve for solvent recycling |
| Brand | GengYu |
|---|---|
| Origin | Zhejiang, China |
| Model | RE-5000A |
| Capacity | 5 L |
| Ultimate Vacuum | 0.098 MPa |
| Rotation Speed | 0–200 rpm |
| Temperature Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±1 °C |
| Condenser Cooling Area | 0.26 m² |
| Power Supply | 220 V / 50 Hz |
| Total Power | 1560 W |
| Rotating Motor Power | 40 W |
| Lifting Motor Power | 20 W |
| Heating Power | 1500 W |
| Lift Stroke | 90 mm |
| Net Weight | 30 kg |
| Dimensions (W×D×H) | 690 × 440 × (825–915) mm |
| Brand | NORMAG |
|---|---|
| Origin | Germany |
| Model | NORMAG Vacuum Batch Distillation System |
| Construction Material | High-purity quartz glass (Duran®-grade) |
| Vacuum Capability | Up to 10⁻⁶ mbar |
| Tower Types Available | Packed column, sieve plate column, Vigreux column, micro-rotating band column |
| Thermal Insulation | High-vacuum silvered jacket (10⁻⁶ mbar interlayer) |
| Visual Access | Full-length vertical observation window |
| Structural Feature | Axial thermal expansion compensation corrugated section |
| Control Interface | PC-based LabVIEW-compatible digital control system |
| Compliance | Designed for GLP-compliant operation and ASTM D2892 / ISO 6617 applicability |
| Brand | Gongyi Yuhua Instrument |
|---|---|
| Origin | Henan, China |
| Model | YRE-2050A (50 L) |
| Capacity | 50 L |
| Ultimate Vacuum | < 2000 Pa |
| Rotation Speed | 0–120 rpm |
| Temperature Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Power | 8 kW |
| Rotating Flask Capacity | 50 L |
| Collection Flask Capacity | 20 L |
| Motor Power | 180 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Construction | Borosilicate Glass (3.3), Stainless Steel & Aluminum Alloy Frame, Fluoroelastomer Seals |
| Brand | Gongyi Yuhua Instrument |
|---|---|
| Origin | Henan, China |
| Model | YRE-5299 |
| Capacity | 1 L (standard), optional 2 L |
| Ultimate Vacuum | −0.098 MPa |
| Rotation Speed | 0–120 rpm (stepless) |
| Bath Temperature Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±2 °C |
| Motor Power | 40 W |
| Total Power Consumption | 1000 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Vertical Lift | 150 mm (motorized) |
| Condenser Type | Dual-layer vertical coil |
| Material of Contact Parts | High-borosilicate glass (3.3) and PTFE |
| Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | R-1001VN |
| Evaporation Flask Capacity | 500 mL or 1000 mL |
| Rotation Speed Range | 20–180 rpm |
| Condenser Cooling Area | 0.126 m² |
| Sealing Material | Dual-seal with PTFE and Fluoroelastomer (FKM) |
| Heating Bath Configuration | Separable from main unit |
| Temperature Control | PID-regulated |
| Drive System | Motor-coupled worm-gear transmission |
| Display | Digital speed readout |
| Safety Feature | Lower-positioned vacuum inlet on condenser |
| [Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Model | R-1050 |
| Capacity | 50 L |
| Ultimate Vacuum | 399.9 Pa |
| Rotation Speed | 10–110 rpm |
| Bath Temperature Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±1 °C |
| Condenser Surface Area | Primary 0.91 m² + Secondary 0.52 m² |
| Power Supply | 3-phase, 380 V / 50 Hz |
| Total Power Consumption | 6.3 kW |
| Dimensions (W×D×H) | 1345 × 770 × 2230 mm |
| Net Weight | ~180 kg] |
| [Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Model | R-2050EX |
| Capacity | 50 L |
| Ultimate Vacuum | ≤2 kPa/h |
| Rotation Speed | 20–110 rpm |
| Temperature Range | Ambient +5 to 95 °C |
| Temperature Control Accuracy | ±1.5 °C |
| Condensing Area | Main Condenser 1.15 m², Auxiliary Condenser 0.4 m² |
| Heating Power | 6000 W |
| Total Rated Power | 6500 W |
| Motor Power | 370 W |
| Lift Stroke | 0–170 mm |
| Explosion Protection Rating | Ex d II BT4 |
| IP Rating (Electrical Cabinet) | IP65 |
| Communication Protocol | RS485 / MODBUS RTU |
| Material | Borosilicate Glass 3.3 (DIN ISO 3585), SUS304 Bath, PTFE Seals & Valve Core |
| Dimensions (W×D×H) | 1360 × 770 × 2250 mm] |
| Brand | 1124123/13213112 |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Green-Q1 |
| Pricing | Upon Request |
| Purified Water Grade | ASTM Type III / GB/T 6682–2008 Grade III |
| Resistivity | 13–17.5 MΩ·cm @ 25 °C |
| Feed Water | Municipal Tap Water |
| Operating Pressure | 0.1–0.5 MPa (1.0–5.0 kg/cm²) |
| Inlet Temperature Range | 5–45 °C |
| Output Flow Rate | 10–60 L/h |
| Power Supply | 220 VAC, 50 Hz |
| Rated Power | 50 W |
| Safety Compliance | 24 VDC Low-Voltage Control Circuit, IPX4 Splash Resistance, EMC-Compliant Design |
| Protection Features | Dry-run Protection, Full-Tank Shut-off, RO Membrane Auto-Flush Cycle, Acoustic-Optical Alarm |
| Brand | Hengmei |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HM-ZLA |
| Heating Method | Far-Infrared Electric Heating Mantle (Flame-Free) |
| Cooling Method | External Chilled Water Circulator (Recommended) or Tap Water (Not Recommended Due to Scaling Risk) |
| Distillation Rate | 0–6 mL/min |
| Heating Ramp Time | <20 min |
| Independent Heating Zones | 6 |
| [Brand | HePu (Jihepu) |
|---|---|
| Origin | Shandong, China |
| Model | R-1005 |
| Capacity | 5 L |
| Voltage/Frequency | 220 V / 50 Hz |
| Total Power | 2100 W |
| Rotation Speed | 0–120 rpm |
| Heating Temperature Range | Ambient to 180 °C |
| Temperature Control Accuracy | ±1 °C |
| Vacuum Degree | ≤0.095 MPa |
| Condenser Surface Area | 0.5 m² |
| Bath Lift Stroke | 140 mm |
| Dimensions (W×D×H) | 980 × 480 × 1260 mm |
| Net Weight | 46 kg] |
| [Brand | HePu (Jihepu) |
|---|---|
| Origin | Shandong, China |
| Model | R-1020 |
| Capacity | 20 L |
| Ultimate Vacuum | 399.9 Pa (≤3 mmHg) |
| Rotation Speed | 10–130 rpm |
| Bath Temperature Range | Ambient to 99 °C |
| Heating Control Accuracy | ±1 °C (typical for digital PID-controlled stainless steel water bath) |
| Condenser Surface Area | Equivalent to high-efficiency triple-loop vertical glass condenser |
| Motor | 250 W DC motor |
| Power Supply | 1×220 V / 50 Hz or 3×380 V / 50 Hz |
| Total Power Consumption | 4 kW |
| Dimensions (L×W×H) | 1250 × 600 × 2100 mm |
| Lift Stroke | 0–190 mm |
| Sealing | Dual-material seal (PTFE + fluororubber) |
| Material Contact | High-borosilicate glass (DIN ISO 3585) and PTFE throughout wetted path] |
| Brand | HePu |
|---|---|
| Origin | Shandong, China |
| Model | RE-5003 |
| Rotating Flask Capacity | 50 L |
| Collection Flask Capacity | 20 L |
| Ultimate Vacuum | 0.098 MPa |
| Rotation Speed Range | 0–110 rpm (frequency-controlled, digital display) |
| Bath Temperature Range | 0–400 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Power | 8 kW (380 V / 50 Hz) |
| Rotation Motor Power | 180 W (220 V / 50 Hz) |
| Condenser Type | Vertical triple-coil glass condenser (main coil: Ø160 × 840 mm |
| auxiliary coil | Ø160 × 530 mm) |
| Cooling Surface Area | 0.11 m² |
| Overall Dimensions (W×D×H) | 1520 × 620 × 2470 mm |
| Net Weight | 170 kg |
| Brand | HHitech |
|---|---|
| Origin | United Kingdom |
| Model | Basic-RO15(IT)/Basic-RO30(IT)/Basic-RO45(IT)/Basic-Q15(IT)/Basic-Q30(IT)/Basic-Q45 |
| Purified Water Output | 15/30/45 L/hour |
| RO Rejection Rate | 97–99% (ions), >99% (organics, MW >200 Da), >99% (particles & bacteria) |
| DI Resistivity | 13–17.5 MΩ·cm @ 25°C |
| Conductivity | 0.077–0.057 µS/cm |
| Bacterial Count | <0.01 CFU/mL (with optional 0.45 + 0.1 µm PES final filter) |
| Particle Count (>0.1 µm) | <1/mL (with optional filter) |
| Feed Water | Municipal tap water, 5–45 °C, 1.0–4.0 kgf/cm² |
| Dimensions (Standard) | 340 × 320 × 470 mm |
| Weight | ~15 kg |
| Dimensions (IT Series) | 535 × 320 × 470 mm |
| Weight | ~20 kg |
| Electrical | 100–240 V, 50/60 Hz |
| Power Consumption | 48 W / 72 W / 120 W |
| Configuration | Main unit (incl. one set of purification cartridges) + integrated 12 L pressurized tank (IT models) + accessory kit |
| Certifications | NSF-certified tubing and fittings |
| RO Membrane | Original Dow Filmtec™ elements |