Purification Equipment
Filter
Showing 361–390 of 1230 results
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | N-1100D |
| Capacity | 5 L |
| Ultimate Vacuum | 0.08 MPa (80 kPa) |
| Rotation Speed | 20–200 rpm |
| Temperature Range | Ambient +5 °C to 180 °C |
| Temperature Control Accuracy | ±1 °C |
| Cooling Surface Area | 0.146 m² |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1100D-W |
| Rotation Speed | 20–180 rpm |
| Max. Evaporation Rate | 18 mL/min |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Temperature Control Range (N-1100D-W) | RT +5 to 90°C (water bath) |
| Temp. Accuracy | ±1.5°C (water), ±3.0°C (oil) |
| Heating Power | 1 kW |
| Condenser Type | Vertical double-layer coiled condenser |
| Cooling Surface Area | 0.146 m² |
| Flask Capacity (standard) | 1 L (max. 3 L) |
| Bath Dimensions | Ø230 × 100 mm (≈3 L) or Ø240 × 120 mm (≈5.5 L) |
| Lift Stroke | 100 mm (manual lift) + 150 mm (auxiliary slide extension) |
| Overall Dimensions | 535 × 355 × 790 mm (11 kg) or 550 × 380 × 790 mm (13 kg) |
| Safety Features | Thermal fuse, dry-run prevention sensor |
| Sealing | Dual-material seal (PTFE + fluororubber) |
| Standard Joint Sizes | 29/38 (evaporating flask), S35/20 (receiving flask) |
| Control | Microprocessor-based ON-OFF temperature control with membrane keypad and digital display |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-1100S-W |
| Rotation Speed | 20–180 rpm |
| Max. Evaporation Rate | 18 mL/min |
| Ultimate Vacuum | <399.9 Pa (≤3 mmHg) |
| Temperature Range (Water Bath) | RT+5°C to 90°C |
| Temperature Range (Oil Bath, optional) | RT+5°C to 180°C |
| Temp. Control Accuracy | ±1.5°C (water), ±3.0°C (oil) |
| Heating Power | 1 kW |
| Condenser Type | Inclined double-layer coiled coil |
| Cooling Surface Area | 0.146 m² |
| Flask Capacity | Standard 1 L (max 3 L), Standard Taper: 29/38 |
| Collection Flask | 1 L spherical, Joint: S35/20 |
| Vertical Travel | 100 mm (manual lift) + 150 mm (auxiliary extension) |
| Bath Dimensions | Ø230×100 mm (≈3 L) or Ø240×120 mm (≈5.5 L) |
| Unit Dimensions & Weight | 710×355×510 mm, 11 kg (base config) |
| Sealing | Dual-material PTFE/fluoroelastomer vacuum seal |
| Safety Features | Thermal cut-off fuse, dry-run prevention sensor |
| Optional Integration | Compatible with DPE-1300/DPE-1400 solvent recovery units and NVC-series vacuum controllers |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1100S / N-1100SF |
| Rotation Speed | 20–180 rpm |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | <399.9 Pa (3 mmHg) |
| Bath Temperature Range | RT+5°C to 90°C (N-1100S-W / N-1100SD) or RT+5°C to 180°C (N-1100S-WD) |
| Temp. Control Accuracy | ±1.5°C (water bath, rotating flask) / ±3.0°C (oil bath, rotating flask) |
| Heating Power | 1 kW |
| Condenser | Inclined double-layer coiled tube, cooling area: 0.146 m² |
| Flask Capacity | 1 L pear-shaped (ISO NS29/38) or 500 mL pear-shaped (transparent joint, NS29/38) |
| Receiver | 1 L spherical (ISO S35/20) |
| Shaft Dimensions | ID 18 mm × L 272 mm, TS29/38 |
| Vacuum Seal | Dual-material PTFE/Viton gasket |
| Air Filter | 0.2 µm disk filter (N-1100SD/SFD only) |
| Lift Travel | 100 mm (counterbalanced slide) + 150 mm (manual extension) |
| Bath Dimensions & Capacity | Ø230×100H mm (3 L, water-only) or Ø240×120H mm (5 L, water/oil) |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-1100V-W |
| Rotational Speed | 20–180 rpm |
| Max. Evaporation Rate | 18 mL/min |
| Ultimate Vacuum | <399.9 Pa (≤3 mmHg) |
| Bath Temperature Range (N-1100V-W) | +5°C to 90°C above ambient |
| Temperature Control Accuracy | ±1.5°C (water bath), ±3.0°C (oil bath) |
| Heating Power | 1 kW |
| Condenser Type | Vertical double-layer coiled condenser |
| Cooling Surface Area | 0.146 m² |
| Flask Capacity | Standard 1 L (max. 3 L), 29/38 standard taper joint |
| Collection Flask | 1 L spherical flask, S35/20 ground joint |
| Lift Mechanism | Manual dual-stage lift (100 mm primary + 150 mm auxiliary extension) |
| Bath Dimensions & Capacity | Ø230 mm × 100 mm depth (~3 L) or Ø240 mm × 120 mm depth (~5.5 L) |
| Overall Dimensions & Weight | 535 W × 355 D × 790 H mm / 11.5 kg (standard configuration) |
| Safety Features | Thermal fuse, dry-run prevention sensor |
| Sealing | Dual-material vacuum seal (PTFE + fluororubber) |
| Glassware | VF-type explosion-resistant coated glass (all condenser, collection, and four-way flasks) |
| Brand | EYELA (Tokyo Rikakikai) |
|---|---|
| Origin | Japan |
| Model | N-1100V-W/WD |
| Evaporation Capacity | Max. 25 mL/min |
| Rotational Speed | 20–180 rpm |
| Ultimate Vacuum | < 399.9 Pa |
| Bath Temperature Range | Room Temp +5°C to 90°C |
| Heating Control Accuracy | ±0.5°C (typical for PID-controlled water/oil bath) |
| Cooling Surface Area | 0.146 m² |
| Evaporating Flask Capacity | 3 L |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-1200AV / N-1200AVF-W / N-1200AVF-WD |
| Rotational Speed | 5–280 rpm |
| Max. Evaporation Rate | 25 mL/min |
| Ultimate Vacuum | < 399.9 Pa (≤ 3 mmHg) |
| Water Bath Temp. Range | RT + 5°C to 90°C |
| Oil/Water Dual Bath Temp. Range | RT + 5°C to 180°C |
| Temp. Control Accuracy | ±1.5°C (water) / ±3°C (oil) |
| Temperature Control Method | Microcomputer-based ON-OFF control |
| Heating Power | 1.05 kW |
| Condenser Type | Vertical double-coil |
| Cooling Surface Area | 0.146 m² |
| Flask Capacity | Standard 1 L (up to 3 L compatible) |
| Bath Dimensions & Volume | Ø240 × 120 mm (shallow zone Ø160 mm), ~5.4 L |
| Lift Stroke | 100 mm (manual rack) + 130 mm (handle extension) |
| Overall Dimensions & Weight | 595 W × 445 D × 700 H mm, 16.5 kg |
| Safety Features | Thermal fuse, dry-run prevention sensor |
| Sealing Material | PTFE vacuum seal |
| Condenser & Flask Joints | Standard taper 29/38 (flask), S35/20 (receiving flask) |
| Shaft | Short-type glass rotary shaft, ID 18 mm × L 178 mm |
| Quick-Connect Fitting | Integrated push-fit interface for chiller hose coupling |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1200BT/BTF-W/WD |
| Capacity | 1 L (max 3 L) |
| Ultimate Vacuum | 399.9 Pa (≤3 mmHg) |
| Rotation Speed | 5–280 rpm |
| Bath Temperature Range | Water bath: RT+5 to 90°C |
| Oil/water bath | RT+5 to 180°C |
| Temperature Control Accuracy | ±1.5°C (water), ±3°C (oil) |
| Evaporation Rate | Max. 25 mL/min |
| Condenser Surface Area | 0.12 m² |
| Heating Power | 1.05 kW |
| Lift Stroke | 100 mm (motorized) + 130 mm (manual extension) |
| Dimensions (W×D×H) | 585 × 455 × 700 mm |
| Weight | 19.4 kg |
| Condenser Type | Wide-mouth vertical coil (Ø110 × 340 mm, internal Ø91 × 230 mm) |
| Flask Standard Taper | 29/38 (evaporating), S35/20 (receiving) |
| Sealing Material | PTFE vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1210BS-WB |
| Capacity | 5.4 L |
| Ultimate Vacuum | 10 hPa (≈7.5 Torr) |
| Rotation Speed | 5–280 rpm |
| Bath Temperature Range | Ambient to 180 °C (±1.5 °C for water, ±3 °C for oil) |
| Evaporation Rate | Max. 25 mL/min (water) |
| Condenser Cooling Area | 0.146 m² |
| Bath Dimensions | Ø240 × 120 mm (H) |
| Power | 1.2 kVA |
| Weight | 18 kg |
| Electrical Supply | AC 220 V, 50 Hz |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1210BS-WB |
| Bath Temperature Range | Room Temp. to 180 °C (±1.5 °C in water, ±3 °C in oil) |
| Rotational Speed Range | 5–280 rpm |
| Evaporation Rate (Water) | Up to 25 mL/min |
| Bath Capacity | ~5.4 L |
| Bath Dimensions (ID) | 240 mm × 120 mm H |
| Bath Material | Aluminum with PTFE Coating |
| Heating Power | 1 kW |
| Vertical Travel | Motorized lift 110 mm + manual extension 130 mm |
| Condenser Type | Tilted dual-spiral coil |
| Flask Capacity | 1–3 L (evaporating), 1 L (receiving) |
| Vacuum Seal | PTFE sealing gasket |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Supply | AC 220 V, 5.5 A, 1.2 kVA, 50 Hz |
| Operating Ambient | 5–35 °C |
| Dimensions (W×D×H) | 729 × 433 × 520 mm (750 mm with lift extended) |
| Weight | 18 kg |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300D |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Motor | Brushless DC |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Input | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Dimensions (W×D×H) | 578×352×645 mm (N-1300D-W) / 565×352×645 mm (N-1300D-WB) |
| Weight | 12.7 kg (N-1300D-W) / 13.3 kg (N-1300D-WB) |
| Bath Capacity | 4.3 L (SB-1300, stainless steel SUS304) / 5.4 L (OSB-2200, aluminum with PTFE coating) |
| Sealing | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Shanghai, China |
| Model | N-1300D-W |
| Capacity | 3 L |
| Ultimate Vacuum | 0.08 MPa |
| Rotation Speed | 10–310 rpm |
| Bath Temperature Range | Ambient to 90 °C |
| Temperature Control Accuracy | ±1 °C |
| Cooling Surface Area | 1200 cm² |
| Bottle Mounting | Dual-side (left/right) adjustable |
| Vertical Travel | 180 mm continuous lift |
| Base | Rotatable circular platform with free-angle positioning |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300S |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Motor | Brushless DC |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Supply | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Dimensions (W×D×H) | 736×352×504 mm (N-1300S-W) / 724×352×504 mm (N-1300S-WB) |
| Weight | 12.1 kg (N-1300S-W) / 12.7 kg (N-1300S-WB) |
| Bath Capacity | 4.3 L (SB-1300, stainless steel SUS304) / 5.4 L (OSB-2200, aluminum with PTFE coating) |
| Sealing | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300V |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Power Input | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Heating Power | 1.3 kW |
| Bath Dimensions (SB-1300) | Ø220 × 120 mm H, ~4.3 L (SUS304) |
| Bath Dimensions (OSB-2200) | Ø240 × 120 mm H, ~5.4 L (aluminum with PTFE coating) |
| Weight | 12.8 kg (N-1300V-W) / 13.4 kg (N-1300V-WB) |
| Overall Dimensions | 543 × 352 × 823 mm (W×D×H) |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Sealing Material | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Shanghai, China |
| Model | N-1300V-W |
| Capacity | 3 L |
| Ultimate Vacuum | 399.9 Pa (3 mmHg) |
| Rotation Speed | 10–310 rpm |
| Bath Temperature Range | Room Temp to 90 °C |
| Temperature Control Accuracy | ±1 °C |
| Condenser Surface Area | 0.146 m² |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Supply | 220 V, 11.1 A |
| Dimensions (W×D×H) | 543 × 352 × 823 mm |
| Weight | 12.8 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-2100 |
| Bath Temperature Range | Room Temp +5 to 90°C |
| Bath Temp Control Accuracy | ±1°C |
| Rotation Speed | 5–160 rpm |
| Max Evaporation Rate | 43 mL/min (F-type), 23 mL/min (U/R-type) |
| Ultimate Vacuum | 399.9 Pa |
| Condenser Surface Area | 0.25 m² |
| Lift Stroke | 160 mm |
| Bath Dimensions & Capacity | Ø280 × 144 mm, ~8.5 L |
| Flask Capacity | 5 L (round-bottom), 3 L (receiving flask) |
| Joint Standard | S35/20 spherical ground glass |
| Weight | ~29 kg |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-3100 |
| Rotational Speed Range | 10–140 rpm |
| Max. Evaporation Rate | 3.5 L/h (water) |
| Ultimate Vacuum | 2.6 hPa |
| Bath Temperature Range | Ambient +10°C to 180°C (±1°C in water, ±3°C in oil) |
| Heating Power | 3.5 kW |
| Temperature Control | PID |
| Vacuum Control Modes | Setpoint, Auto, Program, Pressure-Step |
| Bath Dimensions & Capacity | Φ360 × 200 mm, ~20 L |
| Bath Material | SUS304 stainless steel |
| Condenser | Vertical triple-coil, 0.5 m² cooling surface |
| Flask Capacity | 10 L spherical (neck Ø100 mm) |
| Collection Flask | 5 L spherical with drain valve |
| Sealing | PTFE mechanical seal |
| Lift Stroke | 145 mm (motorized) |
| Motor | Induction type, 60 W |
| Cooling/Inlet Port Diameter | 16 mm (×2), Solenoid Valve Port: 13 mm |
| Ambient Operating Range | 5–35°C |
| External Dimensions (W×D×H) | 930 × 480 × 1890 mm |
| Weight | ~96 kg |
| Power Supply | AC 200 V, 19 A, 3.8 kVA |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-51 |
| Capacity | 50 L (evaporation flask), 20 L (recovery flask) |
| Ultimate Vacuum | ≤2.6 hPa (≤2 Torr) |
| Rotation Speed | 10–80 rpm |
| Bath Temperature Range | +5 to 80 °C |
| Temperature Control Accuracy | ±1–2 °C |
| Condenser Type | Vertical quadruple coil |
| Cooling Surface Area | 2.0 m² |
| Bath Dimensions | Ø560 × 300 mm (H) |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | TVE-1100A / TVE-1100B |
| Temperature Range | TVE-1100A: RT + 5°C to 60°C |
| TVE-1100B | RT + 5°C to 40°C |
| Temp. Control Accuracy | ±0.2°C |
| Oscillation Speed | 100–1100 rpm |
| Amplitude | 3 mm |
| Gas Contact Materials | PTFE, Polypropylene, Viton, Silicone Rubber, Borosilicate Glass |
| Vacuum & Vent Ports | OD 10 mm |
| Drain Tube | OD 12 mm |
| Sample Vessel Compatibility | TVE-1100A — Centrifuge Tubes & Test Tubes (Straight, Flip-top, Screw-cap, Standard Tapered Joint) |
| Operating Ambient | 5–35°C |
| Dimensions (W×D×H) | 300 × 500 × 670 mm |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | TVE-1100A / TVE-1100B |
| Concentration Principle | Vortex-assisted vacuum evaporation |
| Temperature Range | Ambient +5°C to 60°C (TVE-1100A), Ambient +5°C to 40°C (TVE-1100B) |
| Temperature Accuracy | ±0.2°C |
| Oscillation Speed | 100–1100 rpm (50/60 Hz) |
| Oscillation Amplitude | 3 mm |
| Gas Line Materials | PTFE, Polypropylene (PP), Viton®, Silicone Rubber, Borosilicate Glass |
| Vacuum & Vent Port OD | 10 mm |
| Drain Tube OD | 12 mm |
| Compatible Vessels | Centrifuge tubes (29 mm OD × 110 mm), Standard test tubes (Φ12–Φ18 mm × 100–180 mm), Straight-, flip-, screw-, and standard ground-glass joint formats |
| Operating Ambient | 5–35°C |
| Dimensions (W×D×H) | 300 × 500 × 670 mm |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | VTX-2000 / VTX-2500 |
| Instrument Type | Automated Quantitative Vacuum Concentrator |
| Temperature Range | +10–80°C |
| Temperature Control Accuracy | ±1°C |
| Sample Capacity | 250 mL × 6 positions |
| Rotational Speed | 20–350 rpm |
| Ultimate Vacuum | 7 hPa (5 mmHg) |
| Cooling Water & Vacuum Port ID | 10 mm |
| Dimensions (W×D×H) | 670 × 570 × 710 mm |
| Weight | 35 kg |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Filtration System |
| Sample Processing | Waste Water Treatment |
| Filter Types Supported | Activated Carbon Filter, Catalyst Filter, Bag Filter, High-Voltage Insulating Oil Filter, Depth Filter, Sterile Filter, Corrosion-Resistant Filter |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FP-9000 |
| Pricing | Available Upon Request |
| Brand | FSTAR |
|---|---|
| Origin | Liaoning, China |
| Model | F-1 |
| Sample Type | Spent photographic fixer, bleach-fix (blix), and silver plating effluents |
| Recovery Rate | ≥99.5% silver removal efficiency |
| Recovered Silver Purity | ≥99.8% (flakes) |
| Average Recovery Capacity | 110 g/h |
| Residual Silver Concentration | <0.010 g/L |
| Power Consumption | <40 W |
| Control Interface | PC-based automated control system with real-time monitoring, calendar function, and cathode thickness alarm |
| Compliance | Designed for GLP-aligned laboratory operation |
| Brand | FSTAR |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | REGO-BUG® |
| Price Range | USD $14,000 – $72,000 (FOB) |
| Sample Processing | Wastewater Treatment |
| Principle | Electrowinning via High-Surface-Area Cathode Electrolysis |
| Target Metals | Au, Ag, Rh, Pt, Pd |
| Applicable Solutions | Cyanide-based plating drag-out solutions, gold strike baths, cyanide strip solutions, rinse waters from electroplating lines |
| Brand | Deepflow |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CYPAKGARD1 |
| Pricing | Available Upon Request |
| Brand | Deepflow |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | CYPAKGARDH2 |
| Pricing | Available Upon Request |
| Brand | JIQUN |
|---|---|
| Origin | Jiangsu, China |
| Model | JQ-HGBQ-1005 |
| Pump Pressure | Up to 72 MPa |
| Flow Rate Range | Up to 10 mL/min |
| UV-Vis Detector Data Acquisition Rate | 100 Hz |
| Linear Range | >2.5 AU |
| Fraction Collector Modes | Time-based, Peak-triggered, Drop-counting |
| Autosampler Precision | 0.3% RSD |
| Carryover | <0.0025% |
| Compliance | Designed for GLP-compliant laboratories |
| Software | PC-controlled with graphical sample map interface |
| Column Compatibility | Standard GPC/SEC columns (e.g., Styragel, PLgel, OHpak) |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GelMaster-1000 |
| Flow Rate Range | 0–10 mL/min |
| UV Detection Wavelength | 254 nm |
| Column Dimensions | 25 × 400 mm |
| Packing Material | Bio-Beads S-X3, 200–400 mesh |
| Solvent System | Ethyl Acetate–Cyclohexane (1:1 v/v) |
| Standard Loop Volume | 5 mL |
| Pump Type | Precision Plunger Pump |
| Detector Type | Single-Wavelength UV Detector |
| Sample Introduction | Manual Injection Valve with Solvent Recovery Three-Way Valve |
| Compliance | AOAC 984.21, EPA SW-846 Method 3640A, FDA 2905A, EN 12393, EN 1528, S-19, S35L00.00-34 |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GelMaster-2000 |
| Flow Rate Range | 0–10 mL/min |
| Maximum Pressure | Not Specified |
| Flow Stability | High (Dual-Piston Pump Architecture) |
| UV Detector Wavelength Range | 190–800 nm |
| GPC Column | 20 × 300 mm, Bio-Beads S-X3 (200–400 mesh), Eluent: Ethyl Acetate/Cyclohexane (3:7 v/v) |
| Fraction Collector | Standard 160-position rack for 20 mL tubes |
| Compliance | AOAC 984.21, EPA SW-846 Method 3640A, FDA 2905A, EN 12393, EN 1528 |