Rain Test Chamber
Filter
Showing 31–60 of 84 results
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Chamber Dimensions (W×D×H) | 1000 × 1000 × 1000 mm |
| Turntable Diameter | Ø300 mm |
| Turntable Load Capacity | 30 kg |
| Turntable Speed | 1–17 rpm (adjustable) |
| Nozzle Diameter | Ø0.4 mm / Ø0.8 mm / Ø1.2 mm |
| Nozzle Spacing | 12.5 mm or 50 mm |
| Oscillating Arm Radius | R400 mm |
| Oscillating Arm Range | ±60°, ±180° |
| Oscillating Flow Rate | 1.8 L/min |
| Rotating Arm Length | 500 mm |
| Rotating Arm Pipe Diameter | Ø16 mm |
| Rotating Arm Nozzle Count | 40 |
| Rotating Arm Speed | 23 rpm |
| Rotating Arm Spray Pressure | 98 kPa (adjustable) |
| Rotating Arm Flow Rate | 25.4 L/min (adjustable) |
| Water Supply | Clean municipal tap water |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,600 (FOB) |
| Internal Chamber Dimensions | 80 × 80 × 80 cm or 100 × 100 × 100 cm |
| Spray Ring Radius | 400 mm |
| Spray Pipe Diameter | φ16 mm |
| Nozzle Orifice Diameter | 0.4 mm |
| Nozzle Spacing | 50 mm |
| Oscillating Arm Range | ±60°, ±90°, ±160° |
| Turntable Speed | 1 rpm (standard), variable-speed option available |
| Rain Duration | Adjustable up to 15 min |
| Intermittent Interval | Adjustable up to 30 min |
| Rainfall Intensity | Up to 150 mm/h (adjustable) |
| Viewing Window | Large-area tempered glass door |
| Construction Material | Mirror-finish SUS304 stainless steel (inner & outer chamber, turntable) |
| Safety Protections | Leakage protection, short-circuit protection, motor overload protection |
| Power Supply | 1Φ3W AC220V±10% 50/60 Hz or 3Φ5W AC380V±10% 50/60 Hz |
| Compliant Standards | GB/T 10485–2007, GB/T 4208–2008, GB/T 4942.2–1993 |
| Brand | OEM / Third-party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Chamber Dimensions (W×D×H) | 1000 × 1000 × 1000 mm |
| Operating Temperature Range | +5 to +36 °C |
| Max Relative Humidity | ≤85 %RH |
| Nozzle Quantity | 25 |
| Nozzle Diameter | 0.4 mm |
| Nozzle Spacing | 50 mm |
| Spray Arm Radius | 375 mm |
| Spray Arm Inner Diameter | 16 mm |
| Oscillation Angle | Adjustable from ±45° to ±90° (180° total sweep) |
| Oscillation Speed | 60°/s (variable via frequency inverter) |
| Construction | Cold-rolled steel exterior with powder coating |
| Sealing | Dual-layer silicone rubber gasket with rotary waterproof joint |
| Viewing Window | Reinforced organic glass with integrated wiper and LED lighting |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | LX-500 |
| Price | USD 10,800 (FOB Jiangsu) |
| Internal Chamber Dimensions | 800 × 800 × 800 mm |
| External Dimensions | 1020 × 1350 × 1550 mm |
| Spray Ring Radius | R375 mm or R500 mm |
| Water Pipe Diameter | 16 mm |
| Nozzle Diameter | 0.4 mm |
| Nozzle Spacing | 50 mm |
| Oscillating Pipe Swing Angle | ±60°, ±90°, ±180° |
| Turntable Rotation Speed | 1 rpm |
| Controller | Digital Programmable Oscillation Controller with Imported Frequency Converter |
| Timer | Microprocessor-Based Programmable Timer |
| Water Pressure Regulation | Calibrated Flow Meter |
| Oscillation Parameters | Adjustable Swing Angle and Angular Velocity |
| Water Supply System | Integrated Reservoir + Booster Pump |
| Safety Protections | Leakage Current Protection, Short-Circuit Protection, Motor Overheat Protection |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,500 (FOB) |
| Compliance | MIL-STD-810G Method 506.6, IEC 60529 IPX1–IPX6, GB/T 4208, GB/T 2423.38, GJB 150.8 |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Quotation | USD 3,600 (FOB) |
| Compliance Standards | MIL-STD-810H Method 506.7, IEC 60529 IPX3/IPX4, ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8 |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic |
| Model | LS-800 |
| Temperature Range | Ambient to 80 °C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed Range | 5–18 m/s |
| Test Duration | 0–999 min |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | OK Instruments Co., Ltd. |
| Type | LS-801 |
| Temperature Range | (RT + 10°C) to 55°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed Range | 5–18 m/s |
| Test Duration | 0–999 min |
| Inlet Nozzle Diameter | Φ6.3 mm |
| Water Flow Rate | 12.5 ± 0.625 L/min |
| Spray Distance | 2.5–3.0 m |
| Turntable Speed | 1–5 RPM |
| Turntable Load Capacity | ≤100 kg |
| Power Supply | AC 220 V / 380 V |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LS-803 |
| Price | USD 3,500 (FOB Guangdong) |
| Temperature Range | (RT + 10°C) to 55°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed Range | 5–18 m/s |
| Test Duration | 0–999 min |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic |
| Model | LS-804 |
| Temperature Range | (RT + 10°C) to 55°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed Range | 5–18 m/s |
| Test Duration | 0–999 min |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | LS-805 |
| Price | USD 3,500 (FOB Guangdong) |
| Temperature Range | (RT + 10°C) to 55°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed | 5–18 m/s |
| Test Duration | 0–999 min |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | LS-806 |
| Price | USD 3,500 (FOB Guangdong) |
| Temperature Range | (RT + 10°C) to 5°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed Range | 5–18 m/s |
| Test Duration | 0–999 min |
| Compliance | IEC 60529, GB 4208, ISO 20653, MIL-STD-810G Method 506 |
| Spray Modes | Oscillating Pipe (IPX3/IPX4), Adjustable-Pressure Jet Nozzle (IPX5/IPX6) |
| Chamber Construction | SUS304 Stainless Steel Interior, Powder-Coated Carbon Steel Exterior |
| Turntable | Ø400 mm, 1–5 rpm, Max Load 50 kg |
| Water System | Dual-Stage Filtration (0.45 µm), Auto-Replenishing Stainless Steel Reservoir, Pressure-Regulated Pump (up to 800 kPa) |
| Control | PLC + 7″ HMI Touchscreen, Programmable Cycle Logic, Real-Time Parameter Monitoring |
| Safety | Leakage Detection, Overpressure Cut-off, Door Interlock, Dry-Run Protection |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | LS-807 |
| Temperature Range | (RT + 10°C) to 55°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed Range | 5–18 m/s |
| Test Duration | 0–999 min |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | OK Instruments Co., Ltd. |
| Model | LS-810 |
| Temperature Range | RT+10°C to 55°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed | 5–18 m/s |
| Test Duration | 0–999 min |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic |
| Model | LS-811 |
| Price | USD 3,500 (FOB Guangdong) |
| Temperature Range | (RT + 10°C) to 55°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed Range | 5–18 m/s |
| Test Duration | 0–999 minutes |
| Compliance | IEC 60529, GB 4208, ISO 20653, MIL-STD-810G Method 506 |
| IP Ratings Supported | IPX1 through IPX6 |
| Chamber Construction | SUS304 stainless steel interior, powder-coated carbon steel exterior |
| Control System | PLC-based with 7-inch HMI touchscreen |
| Safety Features | Leakage detection, low-water cutoff, overcurrent protection, interlocked door switch |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | LS-812 |
| Temperature Range | (RT + 10°C) to 55°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed Range | 5–18 m/s |
| Test Duration | 0–999 min |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | OK Instruments Co., Ltd. |
| Model | LS-813 |
| Temperature Range | (RT + 10°C) to 55°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed | 5–18 m/s |
| Test Duration | 0–999 min |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic |
| Model | LS-815 |
| Price | USD 3,500 (FOB Guangdong) |
| Temperature Range | (RT + 10°C) to 55°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed Range | 5–18 m/s |
| Test Duration | 0–999 min |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic |
| Model | LS-816 |
| Price | ¥26,000 |
| Temperature Range | (RT + 10°C) to 55°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed Range | 5–18 m/s |
| Test Duration | 0–999 min |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | OK-LY-500C |
| Price | ¥26,000 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | OK-LY-500C |
| Price | USD 3,650 (approx.) |
| Chamber Interior Dimensions | 800 × 800 × 800 mm |
| Spray Ring Radius | 375 mm |
| Nozzle Diameter | 0.4 mm |
| Nozzle Spacing | 50 mm |
| Oscillation Angles | ±45°, ±60°, ±90°, ±180° |
| Turntable Speed | 1 rpm (adjustable via inverter) |
| Water Pressure Control | Digital Flow Meter + High-Pressure German Pump |
| Filtration System | Dual-stage Stainless Steel Mesh + Sediment Filter |
| Viewing Window | Tempered Safety Glass |
| Compliance | MIL-STD-810G Method 506.6, IEC 60529 IPX3/IPX4, ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8 |
| Brand | OKE Instruments |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,600 (FOB, ex-works |
| Compliance | GB/T 2423.38–1995 (Ra2 & Rb2.2), IEC 60529 (IPX1–IPX3), GB 4208–2017 |
| Rainfall Rate | 200–300 mm/h (Ra2), Water Pressure: 80–100 kPa (Rb2), Flow Rate: 10 ± 0.5 L/min |
| Test Duration | 0–999.9 min |
| Chamber Temp. Range | 25 ± 5 °C (ambient, water temp. ≤ 20 °C) |
| Structural Material | AISI 304 stainless steel body, brass nozzles, integrated filtered recirculation system |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,500 (approx.) |
| Compliance Standards | MIL-STD-810G Method 506.6, IEC 60529 (IPX1–IPX6), ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8, IEC 60068-2-68, GB/T 4942.1, IEC 60034-5 |
| Brand | YueLian (PW) |
|---|---|
| Origin | Guangdong, China |
| Model | PW-IP56 |
| Rain Duration | 1–9999 min (adjustable) |
| IP Rating Compliance | IPX3, IPX4, IPX4K, IPX5, IPX6 |
| Spray Nozzle Diameters | φ0.4 mm (IPX3/IPX4), φ6.3 mm (IPX5), φ12.5 mm (IPX6) |
| Water Flow Rates | 2.9 L/min (IPX3), 4.3 L/min (IPX4), 12.5 ±1 L/min (IPX5), 100 ±5 L/min (IPX6) |
| Turntable Diameter | Φ450 mm, Speed: 1–5 rpm (adjustable) |
| Oscillating Pipe Radius | 0.4 m (R400 mm standard), Swing Angle: ±60° or ±160° (configurable) |
| Internal Chamber Dimensions | 1000 × 1000 × 1000 mm (W×H×D) |
| Construction Material | SUS304 stainless steel (1.0 mm thickness, full-welded structure) |
| Control System | PLC + stepper motor + 7-inch color touchscreen HMI |
| Safety Protections | Overload, short-circuit, grounding, low-water level, audible alarm |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | QJCK-395A |
| Temperature Range | −45 °C to +150 °C |
| Compliance | GB/T 28046.4–2011, VW 80000:2009-10 |
| Application Scope | Automotive, Aerospace, Electronics, Appliance Reliability Testing |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Qingji SCY-1215 |
| Price | USD 7,800 (FOB Shanghai) |
| Compliance | GB/T 4208–2017, GB/T 4942.1–1993, IEC 60529:2013 (equivalent) |
| Chamber Interior Dimensions | 800 × 800 × 800 mm (D×W×H) |
| External Dimensions | 1100 × 1300 × 1700 mm (D×W×H) |
| Oscillating Pipe Radius | 400 mm |
| Nozzle Quantity | 25 |
| Nozzle Diameter | Ø0.4 mm |
| Nozzle Spacing | 50 mm |
| Pipe Diameter | Ø16 mm |
| Water Flow Rate per Nozzle | 0.07 L/min |
| Total Flow Rate | ~1.8 L/min |
| Oscillation Angle | ±60° (120° total sweep) |
| Cycle Time per Full Oscillation | ~12 s |
| Timer Range | 00:00:00 to 99:59:59 (h:mm:ss) |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Interior Material | SUS304 2B stainless steel |
| Exterior Enclosure | Cold-rolled steel with anti-rust pretreatment and electrostatic powder coating |
| Sample Tray | Custom stainless steel tray with precision-drilled drainage holes |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | QJSCY-1215 |
| Price | USD 7,700 (FOB Shanghai) |
| Temperature Range | Ambient to +60 °C (optional ambient-controlled enclosure available) |
| Rainfall Intensity | Adjustable 0.5–10 L/min/m² (calibrated per IEC 60529 Annex B) |
| Droplet Diameter | 0.1–0.4 mm (monodisperse nozzle array, certified per ISO 16750-4) |
| Wind Speed Range | 0–12 m/s (optional integrated axial fan system) |
| Test Duration | 0–99 h 99 min 99 s (programmable timer with non-volatile memory) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | QJSCY-1215 |
| Price | ¥68,000 CNY |
| Temperature Range | Ambient to +60 °C (standard configuration) |
| Rainfall Intensity | Adjustable up to 10 L/min/m² (calibrated per IEC 60529 Annex B) |
| Raindrop Diameter | 0.1–0.4 mm (monodisperse nozzle array) |
| Wind Speed Range | 0–12 m/s (optional integrated blower module) |
| Test Duration | 0–99 h 99 min 99 s (programmable timer with non-volatile memory) |