- All
- Favorite
- Popular
- Most rated
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PH20 |
| Pricing | Available Upon Request |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | PH20 |
| Type | Motorized 5-Axis Touch-Trigger Probe Head |
| Power Requirement | None (Passive, No Air Supply Required) |
| Compatibility | Retrofitable to Existing CMMs with TP20-style Interface |
| Calibration Method | Inferred Calibration (Single-Point Vector Determination) |
| Mounting Options | Direct Spindle Mount or Via Adaptor Kits (e.g., ISO 40/50, HSK, CAT) |
| Software Integration | Native Support in MODUS, PC-DMIS, QUINDOS, and OpenDMIS |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | XR20-W |
| Weight | ~1 kg (unit device), <7 kg (full system in Peli™ case) |
| Measurement Accuracy | ±1 arcsecond |
| Power | Rechargeable battery |
| Connectivity | Bluetooth® 4.0 |
| Compatible Laser Interferometers | XL-80 (standard), ML10 (USB interface version forthcoming) |
| Compliance | Fully calibrated and certified per ISO 10360 and ISO 230-4 prior to shipment |
| Software | Renishaw XCalibrator v3.x with ISO 230-4 / ASME B5.54 preconfigured test templates, automatic alignment calibration, GLP-compliant audit trail |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | Equator™ |
| Type | Comparative Measurement System for Geometric Dimensioning and Tolerancing (GD&T) |
| Structural Principle | Parallel-Kinematic Mechanism with Kinematic Coupling |
| Measurement Method | Relative Comparison Against Master Parts Using Touch-Trigger and High-Speed Scanning Probes |
| Compliance Basis | Traceable to CMM-Calibrated Reference Parts per ISO 10360, ISO 14253, and ASME B89.4.1 |
| Software Platform | MODUS™ Equator (DMIS-compliant), MODUS™ Organiser (Operator Interface) |
| Probe System | Renishaw SP25 Micro-High-Accuracy Scanning Probe with SM25 Modular Styli Exchange |
| Thermal Compensation | Real-Time Re-Zeroing via Master Part Re-Reference |
| Fixture Requirement | ±1 mm Positioning Tolerance |
| Controller | Integrated Industrial PC-Based Equator Controller (No External PC Required) |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | QC10 |
| Resolution | 0.1 µm |
| Sensor Accuracy | ±0.5 µm at 20 °C |
| Maximum Sampling Rate | 250 Hz |
| Optional Extension Rods | 50 mm, 150 mm, 300 mm |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | TP200 |
| Probe Type | Modular Trigger (Kinematic) Probe for CMMs |
| Sensor Technology | Micro-strain Gauge |
| Repeatability | < 0.5 µm (3σ, under controlled conditions) |
| Overtravel Force Options | Standard Force (SF) or Low Force (LF) |
| Interface | PI 200 (Proprietary Renishaw CMM Interface) |
| Toolchanging Compatibility | SCR200 Automatic Probe Change Rack |
| Electronics | ASIC-based Signal Conditioning and Debounce Circuitry |
| Operating Life | > 10⁶ triggers (typical, per module) |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | RTP20 |
| Probe Type | Integrated TP20 Touch Trigger Probe |
| Indexing Increment | 15° |
| Compatibility | Fully Supported by Standard CMM Controllers (e.g., Renishaw UCC Series) |
| Module Exchange | Compatible with MCR20 Automatic Module Changer Rack |
| Actuation Method | CMM-Motion-Driven Mechanical Engagement (No Internal Motor or Encoder) |
| Classification | Precision Geometric Measurement Instrument — Coordinate Measuring Machine (CMM) Peripheral |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | RM44 |
| Housing Material | Stainless Steel |
| Protection Rating | IP67 (IEC 60529) |
| Operating Temperature Range | −40 °C to +85 °C |
| EMC Compliance | EN 61000-6-2 / EN 61000-6-4 |
| Shock Resistance | 100 g (6 ms, half-sine) |
| Vibration Resistance | 10 g (10–2000 Hz, random) |
| Output Interface | Incremental (A/B/Z quadrature), Optional Sinusoidal 1 Vpp or RS422 |
| Maximum Resolution | Up to 131,072 counts/rev (configurable via interpolation) |
| Bearing Type | Dual-sealed, maintenance-free ball bearings |
| Electrical Connection | M12 connector (4-pin or 8-pin, depending on interface) |
| Shaft Configuration | Hollow shaft (standard), solid shaft (optional) |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | RESOLUTE™ |
| Encoder Type | True Absolute, Fine-Pitch Optical Encoder |
| Maximum Rotational Speed | 36,000 rpm |
| Position Resolution | 27-bit (134,217,728 counts/rev) |
| Output Interface | BiSS-C, EnDat 2.2, or proprietary Renishaw serial protocol |
| Contamination Resistance | Engineered for high-dust, oil-mist, and condensation-prone industrial environments |
| Compliance | Designed to support ISO 9001 manufacturing processes |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | SiGNUM™ |
| Enclosure Rating | IP64 (SR readhead) |
| Thermal Operating Range | −10 °C to +85 °C |
| Maximum Speed | >3600 rpm (at Ø52 mm) |
| Angular Accuracy | ±0.5 arc seconds |
| Repeatability | 0.02 arc seconds |
| Subdivision Error | <±40 nm |
| Scale Pitch | 20 µm |
| Scale Material | Stainless Steel (RESM ring) |
| Installation Flexibility | Tapered Mounting System |
| Signal Processing | SiGNUM™ Intelligent Interpolation |
| Zero Reference | IN-TRAC™ Bidirectional Optical Reference Marks |
| Compliance | RoHS, CE, UKCA |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | RMB28 |
| Type | Non-contact, Two-part Optical Encoder Module |
| Mounting | OEM-integrated, Direct-mount Design |
| Environmental Rating | IP64 (when fully assembled with compatible readhead and scale) |
| Output Interface | Analog 1 Vpp Sin/Cos or Digital A/B/Z TTL/RS422 (configurable per variant) |
| Typical Scale Pitch | 20 µm |
| Maximum Speed | >3 m/s (dependent on resolution and interface) |
| Operating Temperature | 0 °C to +50 °C |
| Thermal Expansion Coefficient Matching | Optimized for aluminum and stainless steel substrates |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | TONiC™ |
| Maximum Speed | 10 m/s |
| Resolution | down to 5 nm |
| Subdivision Error | < ±30 nm |
| Operating Temperature | up to 70 °C |
| Compliance | RoHS, WEEE |
| Output Options | 1 Vpp analog, digital via 15-pin D-sub connector with diagnostics |
| IN-TRAC™ Reference Mark | Integrated bidirectional optical zero mark |
| Signal Stability | Enhanced by AGC and optical filtering |
| Installation | Tool-less, self-aligning readhead with dual diagnostic LEDs |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | XL80 |
| Measurement Speed | up to 4.0 m/s |
| Sampling Rate | up to 50 kHz |
| Linear Accuracy | ±0.5 ppm (0–40 °C) |
| Laser Stabilization Accuracy | ±0.05 ppm |
| Resolution | 0.001 µm |
| Maximum Linear Measurement Range | 80 m |
| Warm-up Time | ~6 minutes |
| Environmental Compensation | via XC-80 sensor (7-second update interval) |
| Wavelength Reference | Stabilized HeNe laser (traceable to SI meter) |
| Optical Compatibility | Fully backward-compatible with ML10 interferometer optics |
| Software | LaserXL™ (step-by-step machine tool verification), QuickViewXL™ (real-time display) |
| Portability | Total system weight <15 kg (laser head + XC-80 + cables + power supply + sensors) |
| tripod weight | 6.2 kg |
| Warranty | 3-year standard, extendable to 5 years |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | PH10 |
| Interface Compatibility | AutoJoint (PH10M/MQ) or M8 threaded (PH10T) |
| Maximum Probe Extension | 300 mm |
| Compatible with | ACR3 automatic probe changer, SP25M 3-axis scanning probe (2000 points/sec, 100 mm/s scan speed), TP20/TP200 touch-trigger probes |
| Regulatory Compliance | Designed for integration into ISO/IEC 17025-accredited CMM environments |
| Software Integration | Native support for PC-DMIS, QUINDOS, and MODUS metrology software suites |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | AM4096 |
| Output Interfaces | SSI (12-bit absolute), RS422 (incremental), Analog Linear Voltage, Tacho (speed), UVW (commutation) |
| Zero Position | Infinitely reprogrammable |
| Supply Voltage | 3 V or 5 V selectable |
| Compliance | RoHS-compliant, CE-marked for industrial use |
| Operating Temperature Range | –20 °C to +70 °C |
| Package | QFN-32 |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | XL-80 |
| Measurement Principle | Stabilized HeNe laser interferometry (wavelength 632.991 nm, traceable to SI meter) |
| System Accuracy | ±0.5 ppm (0–40 °C, compensated) |
| Resolution | 0.001 µm |
| Max Linear Velocity | 4.0 m/s |
| Sampling Rate | 50 kHz |
| Measurement Range | 0–80 m |
| Laser Warm-up Time | ~6 min |
| Environmental Compensation | XC-80 sensor (updates compensation every 7 s) |
| Laser Source Stability | ±0.05 ppm |
| Beam Height & Optical Compatibility | Fully compatible with ML10 optics and mounts |
| Software Suite | LaserXL™ (step-by-step metrology workflows), QuickViewXL™ (real-time display) |
| Warranty | 3 years standard, extendable to 5 years |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | QC20-W |
| Type | Precision Geometric Measurement Instrument |
| Core Technology | Dual-Point Kinematic Interferometric Displacement Measurement |
| Communication | Bluetooth 5.0 (Class 1, up to 30 m range in line-of-sight) |
| Sensor Principle | Non-contact capacitive linear displacement sensing with integrated thermal compensation |
| Mechanical Design | Telescopic carbon-fiber arm (standard 100 mm–300 mm extension range, ISO 230-4 compliant length stability ±0.1 µm/°C) |
| Compliance | Fully compatible with ISO 230-4:2022, ANSI B5.54-2020, and VDI/VDE 2617 Part 6 |
| Software Platform | Renishaw Ballbar20 v4.x (Windows 10/11, 64-bit), supports FDA 21 CFR Part 11 audit trail, GLP/GMP-compliant report generation, and automated test sequence scripting |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | SP25M |
| Probe Type | Dual-mode (scanning + touch-trigger) |
| Sensor Integration | Integrated capacitive scanning sensor + mechanical trigger sensor |
| Compatible Shank Lengths | 20 mm to 400 mm |
| CMM Interface | Standard M3, M4, or HSK shank options (per OEM integration) |
| Operating Principle | Capacitive displacement sensing (scanning mode) |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | FASTRACK™ |
| Accuracy | ±5 µm/m |
| Construction | Stainless Steel |
| Mounting Type | Bracket-Mounted |
| Serviceability | Modular, Segment-Replaceable Scale |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | RMC |
| Output Signals | RS422 differential quadrature (A/B/Z) + commutation (U/V/W) |
| IP Rating | IP67 (standard), optional IP69K |
| Mounting | Hollow-shaft or servo-mount compatible |
| Electrical Interface | 5 VDC or 10–30 VDC supply |
| Operating Temperature | −20 °C to +85 °C |
| Shock Resistance | 100 g, 6 ms (half-sine) |
| Vibration Resistance | 10 g RMS, 10–2000 Hz |
| Compliance | RoHS, CE, UL Recognized (E330024) |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | REVO™ |
| Pricing | Upon Request |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | RX10 |
| Compatible Laser Systems | XL-80 or ML10 Laser Interferometer |
| Angular Accuracy | ≤1 arcsecond (standard), optional 0.5 arcsecond |
| Measurement Cycle Time | ≤25 minutes per full axis check |
| Mounting Orientation | Horizontal, vertical, or inverted |
| Built-in Calibration Routine | Yes |
| Automation Level | Fully motorized axis locking, unlocking, and rotation with auto-alignment and real-time tracking |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | ML10 Gold |
| Linear Resolution | 0.001 µm |
| Linear Range | 40 m (optional 80 m) |
| Linear Accuracy | ±0.7 ppm |
| Maximum Measurement Speed | 60 m/min |
| Long-Term Frequency Stability | ±0.05 ppm |
| Environmental Compensation | EC10 sensor integrated |
| Software Platform | Laser10 v5.x |
| Compliance Standards | ISO 230-2, VDI/VDE 2617, VDI 3441, ASME B89.1.12, JIS B6330, GB/T 17421.2–2016 |
Show next