- All
- Favorite
- Popular
- Most rated
| Brand | MP |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FastPrep-24® 5G |
| Instrument Type | Bead Mill Homogenizer |
| Dimensions (W×D×H) | 472 × 385 × 490 mm |
| Sample Volume Range | 0.5–100 mL |
| Brand | MP Biomedicals |
|---|---|
| Origin | USA |
| Model | FastPrep-96 |
| Instrument Type | Bead Mill Homogenizer |
| Dimensions (W×D×H) | 440 × 600 × 700 mm |
| Sample Volume Range | 2–500 mL |
| Operating Speed | 800–1800 rpm (200-rpm increments) |
| Processing Time | 1–360 s (1-s increments up to 60 s |
| Maximum Acceleration/Deceleration | <2 s to full speed or stop |
| Noise Level | <65 dB(A) |
| Power Supply | 110 VAC/60 Hz, 5.2 A or 220 VAC/50 Hz, 2.6 A |
| Weight | 49 kg |
| Compatible Adapters | 2×96-well deep-well plates, QuickFlex (96×2 mL), TallFlex (48×4.5 mL), TeenFlex (24×15 mL), BigFlex (8×50 mL), LargeFlex (2×250 mL), ConeFlex Legacy (backward-compatible with FastPrep-24 accessories) |
| Safety Features | Emergency stop, power-fail recovery, open-dome design with interlocked lid sensor |
| Regulatory Compliance | Designed for GLP/GMP environments |
| Brand | MP |
|---|---|
| Origin | USA |
| Model | FastPrep®-24 |
| Instrument Type | Bead-Based Mechanical Homogenizer |
| Dimensions (W×D×H) | 425 × 330 × 270 mm |
| Sample Capacity | 24 × 2 mL tubes (standard) |
| Processing Volume per Tube | 0.5–100 mL |
| Operating Speed Range | 4.0–6.5 m/s (in 0.5 m/s increments) |
| Time Range | 1–60 s (in 1 s increments) |
| Acceleration/Deceleration | ≤2 s to max speed / full stop |
| Cycle Limitation | 60 s run + 60 s cooldown at 6.5 m/s |
| Noise Level | <70 dB(A) |
| Power Supply | 110 V AC, 60 Hz or 230 V AC, 50 Hz, 400 W |
| Operating Temperature | 15–35 °C |
| Storage Temperature | 7–43 °C |
| Safety Certifications | UL, CE |
| Quality Management | ISO 9001:1994 (QMI Certificate #001080) |
| Brand | MP Biochemicals |
|---|---|
| Origin | USA |
| Model | SuperFastPrep-1 |
| Instrument Type | Bead Beating Homogenizer |
| Dimensions (W×D×H) | 84 × 218 × 117 mm |
| Sample Volume Capacity | 2 mL |
| Operating Speed (AC) | 1,000–4,900 CPM |
| Operating Speed (Battery) | 500–4,400 CPM |
| Motion Profile | Multi-directional reciprocating motion with patented crank-slider mechanism |
| Maximum Amplitude | 38.1 mm |
| Peak Acceleration | 500 × g |
| Noise Level | 100 dB at 4,900 CPM |
| Typical Lysis Time | 2–15 seconds at 3,300 CPM |
| Power Options | Universal AC input (90–240 V, 50/60 Hz) + Rechargeable Li-ion battery |
| Weight | 1.0 kg |
| Brand | ATS |
|---|---|
| Origin | Canada |
| Model | AH1500 |
| Max Operating Pressure | 1500 bar (150 MPa / 22,500 psi) |
| Max Design Pressure | 1800 bar (180 MPa / 27,000 psi) |
| Flow Rate | 5–15 L/h (continuously adjustable) |
| Minimum Sample Volume | 25 mL |
| Motor Power | 2.2 kW / 380 V / 50 Hz |
| Dimensions (W×H×L) | 440 × 410 × 800 mm |
| Weight | 110 kg |
| Cooling | Integrated jacketed homogenization module with external chiller interface |
| Control | Digital pressure display (±10 bar resolution), overpressure protection, auto-circuit cutoff |
| Compliance | Designed for GMP-compliant SIP/CIP operation |
| Power Supply | Three-phase electrical only — no compressed air or water required |
Show next