- All
- Favorite
- Popular
- Most rated
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXSD-1160 |
| Quotation | Upon Request |
| Temperature Control Range | 4–65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤±1 °C |
| Temperature Fluctuation | ≤±0.5 °C |
| Chamber Volume | 160 L |
| Internal Dimensions (W×D×H) | 500×500×650 mm |
| External Dimensions (W×D×H) | 630×640×1360 mm |
| Net Weight | 98 kg |
| Power Supply | AC 200 V, 50/60 Hz |
| Rated Power | 700 W |
| Air Circulation | Forced Convection |
| Display | LED |
| Door Type | Double-layer Door with Observation Window (Inner Insulated Glass Door) |
| Defrost Mode | Automatic |
| Ambient Operating Temperature | 5–35 °C |
| Timer Range | Up to 100 h |
| Shelving | 2 Standard Stainless Steel Adjustable Shelves (Expandable to 4) |
| Interior Material | Nano-coated Antibacterial Stainless Steel |
| Lighting | Integrated LED Illumination |
| Power Outlet | Built-in 220 V Socket Inside Chamber |
| Temperature Calibration | Built-in Digital Offset Adjustment |
| Safety Features | Dual-limit Temperature Tracking with Audible/Visual Alarm and Automatic Heating/Cooling Cut-off |
| Recovery Function | Auto-restart After Power Interruption |
| Environmental Compliance | CFC-free Refrigeration System |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXSD-A1270 |
| Quotation | Upon Request |
| Temperature Range | 4–65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤±1 °C (at 37 °C) |
| Temperature Fluctuation | ≤±0.5 °C |
| Chamber Volume | 270 L |
| Interior Dimensions (W×D×H) | 600×600×750 mm |
| External Dimensions (W×D×H) | 730×740×1460 mm |
| Net Weight | 130 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 850 W |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Air Circulation | Forced Convection |
| Door Design | Dual-layer door with observation window and insulated inner glass door |
| Programming Capacity | 10 segments (0 = preset standby |
| Step Duration Range | 1–999 minutes per step |
| Refrigeration System | Air-cooled, R134a refrigerant, frost-free operation with power-modulated compressor |
| Safety Features | Independent over-temperature protection (adjustable 30–80 °C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, compressor overload protection, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Optional Accessories | Embedded thermal printer, RS-232 communication interface |
| Interior Material | Mirror-finish stainless steel |
| Shelving | 2 standard electro-polished stainless steel shelves (expandable to 4) |
| Access Port | Φ50 mm test port |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXRD-A5210 |
| Pricing | Upon Request |
| Capacity | 210 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Horizontal forced convection from rear wall |
| Programming | 10 segments (0 = pre-set standby |
| Step Duration | 1–999 minutes per step |
| Internal Chamber Dimensions (W×D×H) | 500 × 550 × 750 mm |
| External Dimensions (W×D×H) | 690 × 680 × 1220 mm |
| Net Weight | 98 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1700 W |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Systems | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Data Interface | RS-232 port |
| Optional Output | Embedded thermal mini-printer |
| Insulation | High-efficiency multilayer ceramic fiber insulation |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Double-glazed tempered glass with outer pane compliant with EN 61000-6-3 and EN 61000-6-4 safety standards |
| Heating Architecture | Full-perimeter rear-wall heating array with microprocessor-scanned thermal feedback loop |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXSP-A0430 |
| Quotation | Upon Request |
| Temperature Range | −10 °C to +65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±1 °C (at 37 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Chamber Volume | 430 L |
| Interior Dimensions (W×D×H) | 700 × 645 × 950 mm |
| External Dimensions (W×D×H) | 850 × 820 × 1660 mm |
| Net Weight | 185 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1250 W |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Air Circulation | Forced Convection |
| Door Type | Single-layer Tempered Glass Door |
| Programmability | 10 Segments / 18 Steps (Segment 0 = Pre-set Timing |
| Step Duration | 1–999 min per step |
| Defrost Technology | Frost-Free Air-Cooled Refrigeration (R134a) |
| Safety Features | Independent Over-Temperature Protection (Adjustable 30–80 °C), Overheat Prevention Device, Leakage Current & Overcurrent Circuit Breaker, Compressor Overload Protection, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Optional Accessories | Embedded Thermal Printer, RS-232 Communication Interface |
| Interior Material | Mirror-Finish Stainless Steel |
| Shelf Material | Electropolished Stainless Steel (Standard: 2 shelves |
| Max | 4) |
| Test Port | Φ50 mm |
| Ambient Operating Temperature | 5–35 °C |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2270 |
| Quotation | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric Heating |
| Display | LCD |
| Air Circulation | Top-mounted Micro-airflow System |
| Door Configuration | Dual-door (inner tempered glass observation door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Control Range | Ambient +5 to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C (at 37 °C) |
| Programming Capacity | 10 Segments / 18 Steps (Segment “0” = Pre-set Timing |
| Step Duration Range | 1–999 minutes per step |
| Chamber Volume | 270 L |
| Interior Dimensions (W×D×H) | 600 × 550 × 820 mm |
| External Dimensions (W×D×H) | 720 × 665 × 1170 mm |
| Net Weight | 90 kg |
| Power Consumption | 700 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Safety Features | Independent Over-temperature Prevention (adjustable 30–80 °C), Independent Overheat Protection, Leakage Current & Overcurrent Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Auxiliary Functions | Auto Start/Stop, Monitoring Timer, Power Recovery Mode, Parameter Memory, Temperature Display Calibration, RS-232 Communication Interface, Embedded Thermal Printer Output |
| Interior Material | Mirror-finish Stainless Steel |
| Shelf Configuration | 2 standard shelves (expandable to 4) |
| Airflow Design | Optimized 3D laminar micro-circulation duct system |
| Surface Finish | Electropolished stainless steel shelving, Cleanroom-compatible cavity geometry |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXRD-A5110 |
| Quotation | Upon Request |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Rear Horizontal Blowing |
| Ambient Temperature Range | 5–35 °C |
| Temperature Range | Ambient +5 to 200 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1 °C |
| Programming Capacity | 10 Segments / 18 Steps |
| Time per Step | 1–999 min |
| Chamber Volume | 110 L |
| Interior Dimensions (W×D×H) | 420 × 400 × 650 mm |
| External Dimensions (W×D×H) | 610 × 530 × 1030 mm |
| Net Weight | 61 kg |
| Power Consumption | 1300 W |
| Supply Voltage | AC 220 V, 50/60 Hz |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80 °C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Connectivity | RS-232 interface, embedded micro-printer output |
| Insulation | Double-wall construction with high-efficiency mineral wool insulation |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Tempered double-glazed viewing window compliant with EN 61000-6-3 and EN 61000-6-4 safety requirements |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXSP-A0270 |
| Quotation | Upon Request |
| Capacity | 270 L |
| Temperature Range | −10 to +65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±1 °C (at 37 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Air Circulation | Forced Convection |
| Door Type | Single Door |
| Ambient Operating Temperature | 5–35 °C |
| Programming | 10 Segments / 18 Steps (Segment 0 = Pre-Set Timing |
| Step Duration | 1–999 min per step |
| Safety Features | Independent Over-Temperature Protection (Adjustable 30–80 °C), Independent Over-Heat Prevention Device, Leakage Current & Over-Current Circuit Breaker, Compressor Overload Protection, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Additional Functions | Auto Start/Stop, Power Recovery Mode, Parameter Memory, Temperature Display Calibration, Φ50 mm Test Port, RS-232 Communication Interface |
| Optional Accessories | Embedded Thermal Printer |
| Cooling System | Air-Cooled, R134a Refrigerant, Variable-Power Frost-Free Operation |
| Interior Dimensions (W×D×H) | 600 × 600 × 750 mm |
| Exterior Dimensions (W×D×H) | 750 × 780 × 1460 mm |
| Packaging Dimensions (W×D×H) | 870 × 900 × 1630 mm |
| Net Weight | 140 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 900 W |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Interior Material | Mirror-Finish Stainless Steel |
| Shelf Material | Electro-Polished Stainless Steel |
| Viewing Window | Tempered Glass Inner Door |
| Heating Technology | Full-Volume 3D Uniform Heating |
| Airflow Design | Optimized Micro-Airflow Duct System |
| Chamber Geometry | Cleanroom-Optimized Cavity Architecture |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5140 |
| Quotation | Upon Request |
| Capacity | 140 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward convection from bottom-mounted heater |
| Programming | 10 segments / 18 steps (Segment 0 = pre-set timing |
| Step Duration | 1–999 minutes per step |
| Internal Dimensions (W×D×H) | 500×470×600 mm |
| External Dimensions (W×D×H) | 690×600×980 mm |
| Net Weight | 80 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1600 W |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Interface | RS-232 serial port |
| Optional Output | Embedded thermal mini-printer |
| Insulation | High-efficiency mineral wool with double-wall construction |
| Interior Material | Mirror-finish stainless steel |
| Door | Double-glazed tempered glass with outer layer compliant with EN 61000-3-2 safety standards |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXSD-A1430 |
| Pricing | Upon Request |
| Temperature Range | 4–65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤±1 °C (at 37 °C) |
| Temperature Fluctuation | ≤±0.5 °C |
| Chamber Volume | 430 L |
| Interior Dimensions (W×D×H) | 700×645×950 mm |
| External Dimensions (W×D×H) | 830×785×1660 mm |
| Net Weight | 108 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1200 W |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Air Circulation | Forced Convection |
| Door Type | Dual-layer door with observation window and insulated inner glass door |
| Programming Capacity | 10 segments (0 = preset standby |
| Step Duration Range | 1–999 minutes per step |
| Refrigeration System | Air-cooled, R134a refrigerant, frost-free operation with power modulation |
| Safety Features | Independent over-temperature protection (adjustable 30–80 °C), independent overheat prevention device, leakage current & overcurrent circuit breaker, compressor overload protection, self-diagnostic alarms (power failure, sensor fault, upper/lower limit deviation) |
| Optional Accessories | Embedded thermal printer, RS-232 serial interface |
| Interior Construction | Mirror-finish stainless steel chamber, electropolished stainless steel shelves (standard 2, max 4), tempered glass inner door |
| Heating Technology | Full-directional radiant heating with optimized airflow duct design |
| Key Features | 10-segment / 18-step programmable temperature profiling |
|---|---|
| Temperature range | ambient +5°C to 200°C |
| Temperature resolution | 0.1°C |
| Temperature uniformity | ≤±2.5% at max operating temperature |
| Temperature fluctuation | ≤±1°C |
| Chamber volume | 30 L |
| Interior dimensions (W×D×H) | 300×300×340 mm |
| Power | 600 W, AC 220 V, 50/60 Hz |
| Net weight | 40 kg |
| Origin | Shanghai, China |
| Manufacturer | Zhicheng Instrument Co., Ltd. |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXJP-A0230 |
| Pricing | Upon Request |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5090 |
| Pricing | Upon Request |
| Capacity | 90 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Programmability | 10 segments / 18 steps |
| Segment Duration | 1–999 minutes per step |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward forced convection from bottom heater |
| Internal Chamber Dimensions (W×D×H) | 400 × 445 × 485 mm |
| External Dimensions (W×D×H) | 590 × 575 × 865 mm |
| Net Weight | 55 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1100 W |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Data Interface | RS-232 port |
| Optional Output | Embedded thermal microprinter |
| Insulation | Double-wall insulated chamber with outer door glass compliant with EN 61000-3-2 and EN 61000-6-3 safety standards |
| Interior Material | Mirror-finish stainless steel |
| Door | Tempered double-glazed inner door |
| Brand | ZhiCheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXFD-A5430 |
| Pricing | Upon Request |
| Capacity | 430 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward convection from bottom-mounted blower |
| Programming | 10 segments / 18 steps (Segment 0 = pre-set timing |
| Step Duration | 1–999 minutes per step |
| Internal Dimensions (W×D×H) | 700 × 650 × 950 mm |
| External Dimensions (W×D×H) | 890 × 780 × 1420 mm |
| Net Weight | 170 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 3100 W |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms, self-diagnostic system |
| Interface | RS-232 serial port |
| Optional Output | Embedded thermal microprinter |
| Insulation | High-efficiency ceramic fiber + double-wall construction |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Double-glazed tempered glass with outer layer compliant with EN 61000-3-2 safety standards |
| Heating System | Full-perimeter, bottom-mounted heating elements with 360° radiant and convective heat distribution |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZXDR-2800 |
| Display | 7-inch 800×480-pixel 65K-color touchscreen |
| Control System | PID microprocessor-based environmental scanning controller |
| Temperature Range | Ambient +5°C to 65°C |
| Temp. Resolution | ≤±0.1°C |
| Temp. Uniformity | ≤±0.3–1.0°C |
| Temp. Stability (Fluctuation) | ≤±0.1°C |
| Chamber Volume | 800 L |
| Internal Dimensions (W×D×H) | 840×800×1200 mm |
| External Dimensions (W×D×H) | 990×905×1690 mm |
| Net Weight | 168 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Heating Power | 1500 W |
| Air Circulation | Forced convection with optimized micro-airflow duct design |
| Door | Double-layer door with inner safety glass panel |
| Safety Features | Triple independent protection — leakage/overcurrent cutoff, backup thermal cut-off, adjustable overtemperature limiter, self-diagnostic alarm system |
| Programmability | 9-segment / 18-step programmable cycle with ramp-hold capability (max. 999.9 min per segment) |
| Compliance | Designed for GLP-compliant laboratories |
| Optional Interfaces | RS-232 serial port |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | ZXJD-A1270 |
| Pricing | Upon Request |
| Capacity | 270 L |
| Temperature Range | 4–65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±1 °C (at 37 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Air Circulation | Forced Convection (Turbine Fan) |
| Door Configuration | Dual-layer Door with Tempered Glass Inner Window |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 850 W |
| Net Weight | 130 kg |
| Internal Dimensions (W×D×H) | 600 × 600 × 750 mm |
| External Dimensions (W×D×H) | 730 × 740 × 1460 mm |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Safety Features | Independent Over-Temperature Prevention (30–80 °C adjustable), Independent Overheat Protector, Leakage & Overcurrent Circuit Breaker, Refrigeration Overload Protection |
| Programmability | Up to 10 segments / 18 steps, step duration 1–999 min |
| Humidity Control | Optional dual-mode (dry-wet or constant-humidity operation) |
| Water Supply System | Dual-stage automatic reservoir with self-filling design |
| Additional Options | Embedded thermal printer, RS-232 communication interface |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2080 |
| Pricing | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric (Air-Jacketed) |
| Display | LCD |
| Air Circulation | Top-Mounted Micro-Airflow System |
| Door Configuration | Dual Doors (Inner Tempered Glass Viewing Door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Setpoint Modes | Fixed-Value or Stepwise Programming |
| Program Structure | 10 Segments (Segment “0” = Pre-Set Standby |
| Step Duration Range | 1–999 Minutes per Step |
| Temperature Range | Ambient +5 °C to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C at 37 °C |
| Chamber Capacity | 80 L |
| Interior Dimensions (W×D×H) | 400 × 400 × 500 mm |
| External Dimensions (W×D×H) | 520 × 515 × 850 mm |
| Net Weight | 40 kg |
| Power Consumption | 400 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Shelf Quantity | 2 Standard (Expandable to 4) |
| Safety Systems | Independent Over-Temperature Protection (Adjustable 30–80 °C), Independent Over-Heat Prevention Device, Leakage Current & Over-Current Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Data Interface | RS-232 Serial Port |
| Optional Output | Embedded Micro-Printer |
| Interior Material | Mirror-Finish Stainless Steel |
| Shelf Finish | Electro-Polished Stainless Steel |
| Airflow Design | Optimized 3D Convection Pathway |
| Surface Finish | Aesthetic, High-Gloss Exterior Enclosure |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXJP-A0430 |
| Pricing | Upon Request |
| Capacity | 430 L |
| Temperature Range | −10 to 65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±1 °C (at 37 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Humidity Range | 40–95 %RH |
| Humidity Resolution | 0.1 %RH |
| Humidity Fluctuation | ≤ ±2 %RH |
| Humidity Uniformity | ≤ ±6 %RH |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Air Circulation | Forced Convection (Turbine Fan) |
| Door Design | Double-Layer Door with Insulated Inner Glass View Window |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1650 W |
| Net Weight | 175 kg |
| Internal Dimensions (W×D×H) | 700 × 650 × 950 mm |
| External Dimensions (W×D×H) | 850 × 890 × 1650 mm |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Features | Dual independent overtemperature protection (adjustable 30–80 °C), dry-run alarm, sensor fault detection, power failure alarm, leakage & overcurrent circuit breaker, refrigeration overload protection |
| Optional Interfaces | RS-232 serial port, embedded thermal printer |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5250 |
| Quotation | Upon Request |
| Capacity | 250 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Mode | Vertical Forced Convection from Bottom |
| Programmability | 10 Segments / 18 Steps |
| Time per Step | 1–999 min |
| Interior Dimensions (W×D×H) | 600 × 550 × 750 mm |
| External Dimensions (W×D×H) | 790 × 680 × 1220 mm |
| Net Weight | 108 kg |
| Power Rating | 2100 W |
| Voltage/Frequency | AC 220 V, 50/60 Hz |
| Safety Features | Independent Over-Temperature Protection (adjustable 30–80°C), Overheat Prevention Device, Leakage Current & Overcurrent Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Connectivity | RS-232 Interface, Embedded Micro-Printer Output |
| Interior Material | Mirror-Finish Stainless Steel |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Insulation | High-Efficiency Ceramic Fiber with Triple-Layer Door Sealing |
| Compliance | Designed per IEC 61010-1 (Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | ZXRD-7230 |
| Quotation | Available Upon Request |
| Temperature Range | Ambient +5°C to 300°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Chamber Volume | 230 L |
| Interior Dimensions (W×D×H) | 520 × 550 × 800 mm |
| Exterior Dimensions (W×D×H) | 710 × 680 × 1270 mm |
| Net Weight | 104 kg |
| Power Supply | AC 200 V, 50/60 Hz |
| Rated Power | 2700 W |
| Airflow Method | Rear-mounted horizontal forced convection |
| Display | LED digital interface |
| Shelving | 2 standard stainless steel electro-polished shelves (expandable to 4) |
| Safety Features | Triple overtemperature protection (audible/visual alarm, auto-heater cutoff, auto-recovery on power resumption) |
| Calibration | Built-in temperature offset adjustment function |
| Interior Material | Mirror-finish 304 stainless steel chamber with tempered glass inner door |
| Airflow Design | Optimized laminar micro-flow duct system |
| Compliance | Designed per GB/T 5170.2–2017 (Electrical Equipment for Environmental Testing – Temperature Test Equipment), compatible with GLP laboratory practices |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXGP-A2080 |
| Quotation | Upon Request |
| Heating Method | Water-jacketed |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±1.0°C (at 37°C) |
| Temperature Fluctuation | ≤ ±0.5°C |
| Chamber Capacity | 80 L |
| Internal Dimensions (W×D×H) | 400 × 400 × 500 mm |
| External Dimensions (W×D×H) | 560 × 525 × 870 mm |
| Net Weight | 45 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 810 W |
| Control Logic | Fuzzy Logic Algorithm |
| Display | LCD |
| Air Circulation | Top-mounted micro-airflow system |
| Door Configuration | Dual-door (outer insulated door + inner tempered glass observation door) |
| Programming Capability | 10 segments / 18 steps, step duration 1–999 minutes |
| Safety Systems | Independent over-temperature protection (adjustable 30–80°C), independent overheat prevention device, leakage current & overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Data Interface | RS-232 serial port |
| Optional Output | Embedded thermal printer |
| Additional Functions | Auto-start/auto-stop, clock display, power recovery mode, parameter memory with password protection, temperature display calibration, monitoring timer |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZXRD-7080 |
| Temperature Range | Ambient +5°C to 300°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Chamber Volume | 80 L |
| Internal Dimensions (W×D×H) | 375×375×550 mm |
| External Dimensions (W×D×H) | 565×505×930 mm |
| Power Supply | AC 200 V, 50/60 Hz |
| Rated Power | 1500 W |
| Net Weight | 58 kg |
| Airflow Method | Rear horizontal forced convection |
| Display | LED digital display |
| Shelf Capacity | 2 standard shelves (up to 4 optional) |
| Timer Range | 1 min – 99 h 59 min |
| Over-Temperature Protection | Triple-stage safety cutoff (audible/visual alarm, auto-heater shutdown, auto-recovery on power restoration) |
| Interior Material | Mirror-finish stainless steel |
| Shelf Material | Electropolished stainless steel |
| Door | Tempered glass with sealed insulation |
| Calibration Offset Adjustment | Built-in digital temperature correction function |
| Operating Ambient | 5–35°C |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region Category | Domestic (China) |
| Model | ZXMP-A1430 |
| Pricing | Upon Request |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXSD-A1160 |
| Quotation | Upon Request |
| Temperature Range | 4–65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤±1 °C (at 37 °C) |
| Temperature Fluctuation | ≤±0.5 °C |
| Chamber Volume | 160 L |
| Interior Dimensions (W×D×H) | 500×500×650 mm |
| External Dimensions (W×D×H) | 630×640×1360 mm |
| Net Weight | 98 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 700 W |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Air Circulation | Forced Convection |
| Door Design | Dual-layer door with tempered glass inner window |
| Programmability | 10 segments (0 = preset standby |
| step duration | 1–999 minutes per step |
| Cooling System | Air-cooled, R134a refrigerant, frost-free operation with power modulation |
| Safety Features | Independent overtemperature protection (adjustable 30–80 °C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, compressor overload protection, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Additional Functions | Auto-start/auto-stop, clock display, power recovery after outage, parameter memory, temperature display calibration, Φ50 mm access port, RS-232 interface |
| Optional Accessories | Embedded thermal printer |
| Interior Material | Mirror-finish stainless steel |
| Shelving | 2 standard polished stainless steel shelves (max. 4) |
| Heating Technology | Full-dimensional uniform heating |
| Airflow Design | Optimized laminar micro-airflow duct system |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | ZXJD-A1160 |
| Pricing | Upon Request |
Show next