- All
- Favorite
- Popular
- Most rated
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2270 |
| Quotation | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric Heating |
| Display | LCD |
| Air Circulation | Top-mounted Micro-airflow System |
| Door Configuration | Dual-door (inner tempered glass observation door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Control Range | Ambient +5 to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C (at 37 °C) |
| Programming Capacity | 10 Segments / 18 Steps (Segment “0” = Pre-set Timing |
| Step Duration Range | 1–999 minutes per step |
| Chamber Volume | 270 L |
| Interior Dimensions (W×D×H) | 600 × 550 × 820 mm |
| External Dimensions (W×D×H) | 720 × 665 × 1170 mm |
| Net Weight | 90 kg |
| Power Consumption | 700 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Safety Features | Independent Over-temperature Prevention (adjustable 30–80 °C), Independent Overheat Protection, Leakage Current & Overcurrent Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Auxiliary Functions | Auto Start/Stop, Monitoring Timer, Power Recovery Mode, Parameter Memory, Temperature Display Calibration, RS-232 Communication Interface, Embedded Thermal Printer Output |
| Interior Material | Mirror-finish Stainless Steel |
| Shelf Configuration | 2 standard shelves (expandable to 4) |
| Airflow Design | Optimized 3D laminar micro-circulation duct system |
| Surface Finish | Electropolished stainless steel shelving, Cleanroom-compatible cavity geometry |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZXDR-2800 |
| Display | 7-inch 800×480-pixel 65K-color touchscreen |
| Control System | PID microprocessor-based environmental scanning controller |
| Temperature Range | Ambient +5°C to 65°C |
| Temp. Resolution | ≤±0.1°C |
| Temp. Uniformity | ≤±0.3–1.0°C |
| Temp. Stability (Fluctuation) | ≤±0.1°C |
| Chamber Volume | 800 L |
| Internal Dimensions (W×D×H) | 840×800×1200 mm |
| External Dimensions (W×D×H) | 990×905×1690 mm |
| Net Weight | 168 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Heating Power | 1500 W |
| Air Circulation | Forced convection with optimized micro-airflow duct design |
| Door | Double-layer door with inner safety glass panel |
| Safety Features | Triple independent protection — leakage/overcurrent cutoff, backup thermal cut-off, adjustable overtemperature limiter, self-diagnostic alarm system |
| Programmability | 9-segment / 18-step programmable cycle with ramp-hold capability (max. 999.9 min per segment) |
| Compliance | Designed for GLP-compliant laboratories |
| Optional Interfaces | RS-232 serial port |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2080 |
| Pricing | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric (Air-Jacketed) |
| Display | LCD |
| Air Circulation | Top-Mounted Micro-Airflow System |
| Door Configuration | Dual Doors (Inner Tempered Glass Viewing Door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Setpoint Modes | Fixed-Value or Stepwise Programming |
| Program Structure | 10 Segments (Segment “0” = Pre-Set Standby |
| Step Duration Range | 1–999 Minutes per Step |
| Temperature Range | Ambient +5 °C to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C at 37 °C |
| Chamber Capacity | 80 L |
| Interior Dimensions (W×D×H) | 400 × 400 × 500 mm |
| External Dimensions (W×D×H) | 520 × 515 × 850 mm |
| Net Weight | 40 kg |
| Power Consumption | 400 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Shelf Quantity | 2 Standard (Expandable to 4) |
| Safety Systems | Independent Over-Temperature Protection (Adjustable 30–80 °C), Independent Over-Heat Prevention Device, Leakage Current & Over-Current Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Data Interface | RS-232 Serial Port |
| Optional Output | Embedded Micro-Printer |
| Interior Material | Mirror-Finish Stainless Steel |
| Shelf Finish | Electro-Polished Stainless Steel |
| Airflow Design | Optimized 3D Convection Pathway |
| Surface Finish | Aesthetic, High-Gloss Exterior Enclosure |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2160 |
| Quotation | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric Heating |
| Display | LCD |
| Air Circulation | Top-mounted Micro-airflow System |
| Door Configuration | Dual-door (inner tempered glass observation door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Control Range | RT + 5 to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C (at 37 °C) |
| Programmable Segments/Steps | 10 segments (Segment “0” = pre-scheduled standby |
| Step Duration Range | 1–999 minutes per step |
| Chamber Capacity | 160 L |
| Interior Dimensions (W×D×H) | 500 × 500 × 650 mm |
| External Dimensions (W×D×H) | 620 × 615 × 1000 mm |
| Net Weight | 57 kg |
| Power Consumption | 500 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Safety Features | Independent over-temperature prevention (adjustable 30–80 °C), independent thermal cutoff, leakage current protection, over-current trip, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Auxiliary Functions | Auto-start/auto-stop, elapsed time monitoring timer, power recovery mode, parameter memory with password protection, display calibration, RS-232 serial interface, built-in micro-printer output |
| Interior Construction | Mirror-finish stainless steel chamber, electropolished stainless steel shelves (standard 2, max 4), optimized cleanroom-grade cavity geometry |
| Airflow Design | Balanced 3D laminar micro-circulation ducting |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2050 |
| Pricing | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric (Air-Jacketed) |
| Display | LCD |
| Air Circulation | Top-Mounted Micro-Airflow System |
| Door Configuration | Dual Doors (Inner Tempered Glass Observation Door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Control Range | RT + 5 to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C (at 37 °C) |
| Programming Capacity | 10 Segments / 18 Steps |
| Step Duration Range | 1–999 minutes per step |
| Chamber Volume | 50 L |
| Interior Dimensions (W×D×H) | 350 × 350 × 410 mm |
| External Dimensions (W×D×H) | 470 × 465 × 760 mm |
| Net Weight | 33 kg |
| Power Consumption | 350 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Shelving | 2 Standard Stainless Steel Electropolished Shelves (Expandable to 4) |
| Interior Material | Mirror-Finish Stainless Steel |
| Safety Systems | Independent Over-Temperature Protection (Adjustable 30–80 °C), Independent Over-Heat Prevention Device, Leakage Current & Over-Current Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Data Interface | RS-232 Serial Port |
| Optional Output | Embedded Thermal Printer |
| Additional Functions | Auto Start/Stop, Clock Display, Parameter Memory with Password Protection, Temperature Display Calibration, Power Recovery After Interruption, Monitoring Timer |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2120 |
| Quotation | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric Heating |
| Display | LCD |
| Air Circulation | Top-mounted Micro-airflow System |
| Door Configuration | Dual-door (inner tempered glass observation door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Control Range | RT + 5 to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C (at 37 °C) |
| Programmable Stages | 10 segments (Segment “0” = preset timing |
| Total Steps | 18 |
| Step Duration Range | 1–999 minutes per step |
| Chamber Capacity | 120 L |
| Interior Dimensions (W×D×H) | 450 × 450 × 600 mm |
| External Dimensions (W×D×H) | 570 × 565 × 950 mm |
| Net Weight | 51 kg |
| Power Consumption | 500 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Safety Features | Independent over-temperature cut-off (adjustable 30–80 °C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Data Interface | RS-232 serial port |
| Optional Output | Embedded thermal mini-printer |
| Interior Material | Mirror-finish stainless steel |
| Shelf Finish | Electro-polished stainless steel |
| Airflow Design | Optimized 3D laminar micro-circulation duct system |
| Diagnostic Functions | Self-diagnostic firmware with real-time status logging |
Show next