- All
- Favorite
- Popular
- Most rated
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXRD-A5210 |
| Pricing | Upon Request |
| Capacity | 210 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Horizontal forced convection from rear wall |
| Programming | 10 segments (0 = pre-set standby |
| Step Duration | 1–999 minutes per step |
| Internal Chamber Dimensions (W×D×H) | 500 × 550 × 750 mm |
| External Dimensions (W×D×H) | 690 × 680 × 1220 mm |
| Net Weight | 98 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1700 W |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Systems | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Data Interface | RS-232 port |
| Optional Output | Embedded thermal mini-printer |
| Insulation | High-efficiency multilayer ceramic fiber insulation |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Double-glazed tempered glass with outer pane compliant with EN 61000-6-3 and EN 61000-6-4 safety standards |
| Heating Architecture | Full-perimeter rear-wall heating array with microprocessor-scanned thermal feedback loop |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXRD-A5110 |
| Quotation | Upon Request |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Rear Horizontal Blowing |
| Ambient Temperature Range | 5–35 °C |
| Temperature Range | Ambient +5 to 200 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1 °C |
| Programming Capacity | 10 Segments / 18 Steps |
| Time per Step | 1–999 min |
| Chamber Volume | 110 L |
| Interior Dimensions (W×D×H) | 420 × 400 × 650 mm |
| External Dimensions (W×D×H) | 610 × 530 × 1030 mm |
| Net Weight | 61 kg |
| Power Consumption | 1300 W |
| Supply Voltage | AC 220 V, 50/60 Hz |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80 °C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Connectivity | RS-232 interface, embedded micro-printer output |
| Insulation | Double-wall construction with high-efficiency mineral wool insulation |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Tempered double-glazed viewing window compliant with EN 61000-6-3 and EN 61000-6-4 safety requirements |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5140 |
| Quotation | Upon Request |
| Capacity | 140 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward convection from bottom-mounted heater |
| Programming | 10 segments / 18 steps (Segment 0 = pre-set timing |
| Step Duration | 1–999 minutes per step |
| Internal Dimensions (W×D×H) | 500×470×600 mm |
| External Dimensions (W×D×H) | 690×600×980 mm |
| Net Weight | 80 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1600 W |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Interface | RS-232 serial port |
| Optional Output | Embedded thermal mini-printer |
| Insulation | High-efficiency mineral wool with double-wall construction |
| Interior Material | Mirror-finish stainless steel |
| Door | Double-glazed tempered glass with outer layer compliant with EN 61000-3-2 safety standards |
| Key Features | 10-segment / 18-step programmable temperature profiling |
|---|---|
| Temperature range | ambient +5°C to 200°C |
| Temperature resolution | 0.1°C |
| Temperature uniformity | ≤±2.5% at max operating temperature |
| Temperature fluctuation | ≤±1°C |
| Chamber volume | 30 L |
| Interior dimensions (W×D×H) | 300×300×340 mm |
| Power | 600 W, AC 220 V, 50/60 Hz |
| Net weight | 40 kg |
| Origin | Shanghai, China |
| Manufacturer | Zhicheng Instrument Co., Ltd. |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5090 |
| Pricing | Upon Request |
| Capacity | 90 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Programmability | 10 segments / 18 steps |
| Segment Duration | 1–999 minutes per step |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward forced convection from bottom heater |
| Internal Chamber Dimensions (W×D×H) | 400 × 445 × 485 mm |
| External Dimensions (W×D×H) | 590 × 575 × 865 mm |
| Net Weight | 55 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1100 W |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Data Interface | RS-232 port |
| Optional Output | Embedded thermal microprinter |
| Insulation | Double-wall insulated chamber with outer door glass compliant with EN 61000-3-2 and EN 61000-6-3 safety standards |
| Interior Material | Mirror-finish stainless steel |
| Door | Tempered double-glazed inner door |
| Brand | ZhiCheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXFD-A5430 |
| Pricing | Upon Request |
| Capacity | 430 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward convection from bottom-mounted blower |
| Programming | 10 segments / 18 steps (Segment 0 = pre-set timing |
| Step Duration | 1–999 minutes per step |
| Internal Dimensions (W×D×H) | 700 × 650 × 950 mm |
| External Dimensions (W×D×H) | 890 × 780 × 1420 mm |
| Net Weight | 170 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 3100 W |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms, self-diagnostic system |
| Interface | RS-232 serial port |
| Optional Output | Embedded thermal microprinter |
| Insulation | High-efficiency ceramic fiber + double-wall construction |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Double-glazed tempered glass with outer layer compliant with EN 61000-3-2 safety standards |
| Heating System | Full-perimeter, bottom-mounted heating elements with 360° radiant and convective heat distribution |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5250 |
| Quotation | Upon Request |
| Capacity | 250 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Mode | Vertical Forced Convection from Bottom |
| Programmability | 10 Segments / 18 Steps |
| Time per Step | 1–999 min |
| Interior Dimensions (W×D×H) | 600 × 550 × 750 mm |
| External Dimensions (W×D×H) | 790 × 680 × 1220 mm |
| Net Weight | 108 kg |
| Power Rating | 2100 W |
| Voltage/Frequency | AC 220 V, 50/60 Hz |
| Safety Features | Independent Over-Temperature Protection (adjustable 30–80°C), Overheat Prevention Device, Leakage Current & Overcurrent Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Connectivity | RS-232 Interface, Embedded Micro-Printer Output |
| Interior Material | Mirror-Finish Stainless Steel |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Insulation | High-Efficiency Ceramic Fiber with Triple-Layer Door Sealing |
| Compliance | Designed per IEC 61010-1 (Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | ZXRD-7230 |
| Quotation | Available Upon Request |
| Temperature Range | Ambient +5°C to 300°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Chamber Volume | 230 L |
| Interior Dimensions (W×D×H) | 520 × 550 × 800 mm |
| Exterior Dimensions (W×D×H) | 710 × 680 × 1270 mm |
| Net Weight | 104 kg |
| Power Supply | AC 200 V, 50/60 Hz |
| Rated Power | 2700 W |
| Airflow Method | Rear-mounted horizontal forced convection |
| Display | LED digital interface |
| Shelving | 2 standard stainless steel electro-polished shelves (expandable to 4) |
| Safety Features | Triple overtemperature protection (audible/visual alarm, auto-heater cutoff, auto-recovery on power resumption) |
| Calibration | Built-in temperature offset adjustment function |
| Interior Material | Mirror-finish 304 stainless steel chamber with tempered glass inner door |
| Airflow Design | Optimized laminar micro-flow duct system |
| Compliance | Designed per GB/T 5170.2–2017 (Electrical Equipment for Environmental Testing – Temperature Test Equipment), compatible with GLP laboratory practices |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZXRD-7080 |
| Temperature Range | Ambient +5°C to 300°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Chamber Volume | 80 L |
| Internal Dimensions (W×D×H) | 375×375×550 mm |
| External Dimensions (W×D×H) | 565×505×930 mm |
| Power Supply | AC 200 V, 50/60 Hz |
| Rated Power | 1500 W |
| Net Weight | 58 kg |
| Airflow Method | Rear horizontal forced convection |
| Display | LED digital display |
| Shelf Capacity | 2 standard shelves (up to 4 optional) |
| Timer Range | 1 min – 99 h 59 min |
| Over-Temperature Protection | Triple-stage safety cutoff (audible/visual alarm, auto-heater shutdown, auto-recovery on power restoration) |
| Interior Material | Mirror-finish stainless steel |
| Shelf Material | Electropolished stainless steel |
| Door | Tempered glass with sealed insulation |
| Calibration Offset Adjustment | Built-in digital temperature correction function |
| Operating Ambient | 5–35°C |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXRD-A5055 |
| Pricing | Upon Request |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Rear Horizontal Forced Convection |
| Ambient Temperature Range | 5–35 °C |
| Temperature Range | Ambient +5 to 200 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1 °C |
| Programming Capacity | 10 Segments / 18 Steps |
| Time per Step | 1–999 min |
| Chamber Volume | 55 L |
| Interior Dimensions (W×D×H) | 330 × 360 × 450 mm |
| Exterior Dimensions (W×D×H) | 520 × 490 × 830 mm |
| Net Weight | 50 kg |
| Power Rating | 800 W |
| Voltage/Frequency | AC 220 V, 50/60 Hz |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Systems | Independent overtemperature cut-off (adjustable 30–80 °C), independent overheat prevention device, leakage current & overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Data Interface | RS-232 port |
| Optional Output | Embedded thermal mini-printer |
| Insulation | High-efficiency ceramic fiber insulation |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Double-layer tempered glass with outer layer compliant with EN 61000-3-2 safety standards |
| Heating Architecture | Full-perimeter rear-mounted heating elements with 360° air circulation ducting |
| Diagnostic Features | Auto-diagnostic boot-up, parameter memory with password protection, temperature display calibration function, auto-restart after power recovery |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5600 |
| Pricing | Upon Request |
| Capacity | 600 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward from bottom |
| Programmability | 10 segments / 18 steps (Segment 0 = pre-set timer |
| Step Duration | 1–999 minutes per step |
| Interior Dimensions (W×D×H) | 800 × 780 × 1000 mm |
| External Dimensions (W×D×H) | 990 × 910 × 1470 mm |
| Net Weight | 210 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 3700 W |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Features | Independent over-temperature protection (adjustable 30–80°C), independent overheat prevention device, leakage current & overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Connectivity | RS-232 interface, embedded micro-printer output |
| Insulation | Dual-layer door with outer tempered glass compliant with EN 61000-3-2 and EN 60529 IP20 safety requirements |
| Interior Material | Mirror-finish stainless steel |
| Door | Double-glazed tempered glass inner door |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ZXFD-A5040 |
| Quotation | Available Upon Request |
| Capacity | 40 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Programming | 10 segments / up to 18 steps per program |
| Segment Duration | 1–999 minutes per step |
| Control Method | Fuzzy Logic Algorithm |
| Display | LCD |
| Airflow Direction | Vertical forced convection from bottom |
| Internal Chamber Dimensions (W×D×H) | 345 × 300 × 385 mm |
| External Dimensions (W×D×H) | 535 × 430 × 765 mm |
| Net Weight | 45 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 700 W |
| Standard Interfaces | RS-232 serial port, embedded thermal printer |
| Safety Protections | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power failure alarm, sensor fault detection, upper/lower limit temperature alarms, self-diagnostic system |
| Interior Material | Mirror-finish stainless steel |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Door | Double-layer tempered glass with outer surface compliant with EN 61000-3-2 and EN 60598 safety standards |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXRD-7140 |
| Price | Upon Request |
| Airflow | Rear horizontal forced convection |
| Display | LED digital interface |
| Ambient Temperature Range | 5–35 °C |
| Temperature Control Range | Ambient +5 °C to 300 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1 °C |
| Chamber Capacity | 140 L |
| Interior Dimensions (W×D×H) | 450 × 450 × 685 mm |
| Exterior Dimensions (W×D×H) | 640 × 580 × 1065 mm |
| Net Weight | 80 kg |
| Power Consumption | 2100 W |
| Electrical Supply | AC 200 V, 50/60 Hz |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Tempered glass with stainless steel frame |
| Heating System | Large-area embedded panel heater |
| Safety Features | Triple overtemperature protection (audible/visual alarm, auto-heater cutoff, auto-recovery on power resumption) |
| Calibration | Built-in temperature offset adjustment |
| Timer Range | 1 min – 99 h 59 min with end-of-cycle audible alert |
| Data Retention | Parameter memory function for repeat protocols |
Show next