Testing Machine
Filter
Showing 1141–1170 of 3415 results
| Brand | IMCE |
|---|---|
| Model | HTVP1600/1700C (HT1050/1600/1700) |
| Operating Temperature Range | Ambient to 1600 °C / 1700 °C |
| Temperature Stability | ±1 °C |
| Heating Rate | 0.1–20.0 °C/min |
| Resonance Frequency Range | 10 Hz–150 kHz (±0.5 Hz) |
| Damping/Internal Friction Measurement Range | 1×10⁻⁵–0.1 |
| Elastic Modulus Accuracy | <0.1% at RT, <5% at elevated temperature |
| Elastic Modulus Range | 10 MPa–880 GPa |
| Shear Modulus & Poisson’s Ratio | Calculated from resonance spectra |
| Atmosphere Control | Inert, oxidizing, reducing, vacuum-compatible |
| Detection Method | Non-contact laser Doppler vibrometry |
| Compliance | ASTM E1876, ASTM C1259 |
| Brand | IMCE |
|---|---|
| Model | HTVP1600C |
| Measurement Principle | Resonant Frequency Method |
| Frequency Range | 1–100 kHz |
| Damping Factor (tan δ) | 1×10⁻⁵ to 0.1 |
| Temperature Range | Ambient to 1600 °C |
| Atmosphere Control | Yes |
| Compliance | ASTM E1876-99 |
| Output Parameters | Young’s Modulus, Shear Modulus, Poisson’s Ratio, Internal Friction (Q⁻¹) |
| Brand | IMCE |
|---|---|
| Model | HTVP650C |
| Measurement Principle | Impulse Excitation Technique (IET) / Resonance Frequency Analysis |
| Frequency Range | 1–100 kHz |
| Elastic Modulus Accuracy | < ±0.1% |
| Repeatability | < ±0.2% |
| Damping Resolution | down to 1×10⁻⁵ |
| Sample Dimensions | Length 20–300 mm, Width 2–130 mm |
| Maximum Operating Temperature | 650 °C (upgradable to 1100 °C) |
| Compliance | ASTM C1259, ASTM E1187 |
| Software | Integrated IET data acquisition & analysis suite with temperature correlation module |
| Excitation | Automated electromagnetic impulse system |
| Data Output | Young’s modulus (E), Shear modulus (G), Poisson’s ratio (ν), Resonant frequencies (f₁, f₂, …), Internal friction (Q⁻¹) |
| Brand | IMCE |
|---|---|
| Model | RFDA MF Professional |
| Origin | Belgium |
| Application | Non-destructive dynamic mechanical characterization of ceramics, metals, and advanced materials |
| Temperature Range | Ambient to 1750 °C |
| Atmosphere Control | Yes |
| Damping Measurement Range | 1×10⁻⁵ to 0.1 (dimensionless) |
| Measured Parameters | Resonant frequency, elastic modulus (E), shear modulus (G), Poisson’s ratio (ν), internal damping (Q⁻¹ or tan δ) |
| Compliance | ASTM E1876, ISO 12680, DIN 51045-1, applicable to GLP/GMP environments with audit trail enabled in RFDA MF Software |
| Key | Brand: OEM / Third-Party Industrial Supplier |
|---|---|
| Origin | Imported (Non-US/EU Designated Origin) |
| Manufacturer Type | Authorized Distributor |
| Quoted Price | USD 16,800 (FOB Origin, Excluding VAT, Freight & Installation) |
| Key | Table Surface Dimensions: 200 × 200 mm |
|---|---|
| Maximum Payload | 10 kg |
| Pulse Duration Range | 0.2–100 ms (programmable, auto-controlled) |
| Peak Acceleration Range | 50–9999 m/s² (programmable, auto-controlled) |
| Pulse Waveform | Half-sine (compliant with IEC 60068-2-27, GB/T 2423.5, GJB 150.18A, GJB 360B, JJG 497) |
| Shock Direction | Vertical |
| Dual-Impact Prevention | Hydraulic-friction braking system |
| Height Control | Digital preset + hydraulic lifting |
| Sampling Rate | 200 kHz |
| Signal Conditioning | Analog filtering + 160 dB/oct digital anti-aliasing filter |
| Repetition Rate | 0–100 shocks/min (±1% accuracy) |
| Power Supply | AC 380 V ±10%, 50 Hz, 3 kVA |
| System Mass | 2800 kg |
| Overall Dimensions | 750 × 2600 × 1000 mm |
| Software Platform | Windows XP-based, DAO data engine, automated Word report generation, real-time display of lift height, peak acceleration, pulse width, and Δv |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–42,000 (FOB) |
| Load Capacity | 10–100 kg |
| Table Size | 20×20 to 80×65 cm |
| Acceleration Range | 150–15,000 m/s² |
| Pulse Duration | 0.5–30 ms |
| Waveform Options | Half-sine, Trapezoidal, Post-peak Sawtooth |
| Power Supply | AC 380 V ±5%, 50/60 Hz, 3-phase 5-wire |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–70,000 (FOB) |
| Compliance Standards | MIL-STD-810H, IEC 60068-2-29, GB/T 2423.5–2022, GB/T 2423.6–2022, GJB 150.18A–2009, GJB 360B–2009 |
| Waveform Options | Half-sine, Trapezoidal, Post-peak Sawtooth |
| Control Mode | Closed-loop Acceleration Control for Collision Mode |
| Drive System | DC Motor + Precision Gear Reducer + Roller-Lift Mechanism |
| Pulse Duration Range | 1.5–25 ms |
| Peak Acceleration Range | 25–1200 m/s² |
| Drop Height Range | 0–200 mm |
| Repetition Rate | 1–120 impacts/min |
| Operating Pressure | 0.7–0.8 MPa (7–8 kgf/cm²) |
| Power Supply | AC 220 V ±5%, 50 Hz ±0.5 Hz, Single-phase Three-wire |
| Frame Capacity | 1,000 kN |
|---|---|
| Test Speed | 100 mm/min |
| Actuator Stroke | 254 mm |
| Crosshead Adjusting Speed | 300 mm/min |
| Compression Opening | 0–1000 mm |
| Horizontal Opening (Between Columns) | 741 mm |
| Test Space Configuration | Dual-Space (Tension & Compression) |
| Jaw Interface | Hydraulic Open-Front & Manual Closed-Pocket Crossheads |
| Specimen Flexibility | Multi-size Coverage with Minimal Jaw Face Set |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer | Instron Corporation |
| Product Type | Electromechanical Universal Testing Machine |
| Model Numbers | 34TM-5 / 34TM-10 / 34TM-30 / 34TM-50 / 34TM-100 |
| Maximum Load Capacity | 5 kN, 10 kN, 30 kN, 50 kN, or 100 kN |
| Load Accuracy Class | ISO 7500-1 Class 0.5 and Class 1 |
| Data Acquisition Rate | Up to 1 kHz (simultaneous force, displacement, and strain channels) |
| Displacement Accuracy | ±0.02 mm or ±0.15% of reading (whichever is greater) |
| Speed Accuracy | ±0.2% of set speed (at zero or constant load) |
| Power Supply | 100–240 VAC ±10%, 47–63 Hz (single-phase) |
| Operating Temperature | +5 °C to +40 °C |
| IP Rating | IP2X |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer | Instron Corporation |
| Product Type | Electromechanical Universal Testing Machine |
| Model | 34FM-100 / 34FM-300 |
| Load Capacity | 100 kN / 300 kN |
| Load Accuracy | ±0.5% of reading (full scale to 1/250 FS), ±1.0% of reading (1/250 FS to 1/500 FS) |
| Displacement Accuracy | ±0.02 mm or ±0.15% of reading (whichever is greater) |
| Data Acquisition Rate | Up to 1 kHz (synchronized force, displacement, strain) |
| Power Supply | Single-phase 208–240 VAC ±10%, 47–63 Hz |
| Operating Temperature | +5°C to +40°C |
| IP Rating | IP2X |
| Compliance | CE-marked, compliant with applicable EN, ISO 7500-1, ASTM E4, ASTM E83, ISO 9001, and GLP/GMP-relevant traceability requirements |
| Brand | INSTRON |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Models | 34SC-05 / 34SC-1 / 34SC-2 / 34SC-5 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity | Up to 5 kN |
| Force Measurement Accuracy | ±0.5% of reading from 0.4% to 100% FS |
| Displacement Accuracy | ±0.02 mm or ±0.15% of reading (whichever is greater) |
| Speed Accuracy | ±0.2% of set speed (at zero or constant load) |
| Data Acquisition Rate | Synchronized force, displacement, and strain channels up to 1 kHz |
| Motor Type | Brushless AC Servo Motor |
| Operating Temperature | 5–40°C |
| IP Rating | IP2X |
| Compliance | ASTM, ISO, GB, USP, FDA 21 CFR Part 11 (via Bluehill Universal software) |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer | Instron Corporation |
| Model | 34TM-100 |
| Load Capacity | 100 kN |
| Load Accuracy | ±0.5% of reading (down to 1/250 FS), ±1% of reading (down to 1/500 FS) |
| Crosshead Travel | 1097 mm (E1), 1582 mm (E2) |
| Vertical Test Space | 1168 mm (E1), 1672 mm (E2) |
| Horizontal Test Space | 420 mm |
| Speed Range | 0.05–508 mm/min |
| Position Resolution | 16.78 nm |
| Frame Axial Stiffness | 180 kN/mm |
| Data Acquisition Rate | Up to 1 kHz (synchronized force, displacement, strain) |
| Power Supply | 100–240 VAC ±10%, 47–63 Hz |
| Operating Temperature | 5–40°C |
| IP Rating | IP2X |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer | Instron Corporation |
| Product Type | Electromechanical Universal Testing System |
| Load Capacity Options | 400 kN (5988) / 600 kN (5989) |
| Vertical Test Space | 2050 mm (5988) / 2000 mm (5989) |
| Control Architecture | Digital Closed-Loop Servo-Controlled |
| Compliance Standards | ASTM E4, E8, E9, E21, ISO 7500-1, ISO 5893, USP <1041>, FDA 21 CFR Part 11 (with Bluehill software configuration) |
| Data Acquisition Rate | Up to 10 kHz |
| Speed Range | 0.001–1000 mm/min (programmable in 0.001 mm/min increments) |
| Position Resolution | ≤ 0.1 µm |
| Load Cell Options | 1 N to 600 kN full-scale, interchangeable via Auto-ID recognition |
| Integrated Interfaces | Gigabit Ethernet, USB 3.0, Analog I/O (up to 4 channels), Digital I/O |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer | Instron Corporation |
| Product Type | Electromechanical Universal Testing Machine |
| Model Numbers | 68TM-5, 68TM-10, 68TM-30, 68TM-50, 68TM-100 |
| Maximum Load Capacity | 5 kN, 10 kN, 30 kN, 50 kN, or 100 kN |
| Load Accuracy Class | 0.5 or 1 (per ISO 7500-1 / ASTM E4) |
| Data Acquisition Rate | Up to 5 kHz (simultaneous force, displacement, strain) |
| Force Measurement Accuracy | ±0.5% of reading from 0.1% to 100% FS (with 2580 series load cells + Advanced Performance option) |
| Displacement Accuracy | ±0.01 mm or ±0.05% of reading (whichever is greater) |
| Strain Measurement Compliance | ASTM E83, ISO 9513, EN 10002-4, BS 3846 |
| Speed Accuracy | ±0.1% of set speed (under zero or constant load) |
| Operating Temperature | 5–40 °C |
| IP Rating | IP2X |
| Power Supply | 100–240 VAC ±10%, 47–63 Hz |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | 68FM-100 / 68FM-300 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity | 100 kN, 300 kN |
| Load Accuracy | Class 0.5 per ISO 7500-1 and ASTM E4 |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | 68FM-100 / 68FM-300 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity | Up to 300 kN |
| Software Platform | Bluehill® Universal |
| Compliance | ASTM, ISO, GB Standards |
| Drive System | Brushless AC Servo Motor |
| Continuous Operation Capability | Up to 10 days (cyclic, creep, relaxation) |
| Base Construction | 12 mm Thick Wear-Resistant Coated Steel Table |
| Safety Architecture | Patented Operator Protection System with Workflow-Governed State Control |
| Positioning | Automated Gauge Length Recall & Collision-Avoidance Beam Stop |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer | Instron Corporation |
| Product Type | Electromechanical Universal Testing Machine |
| Model Variants | 68SC-05 / 68SC-1 / 68SC-2 / 68SC-5 |
| Load Capacity | Up to 5 kN |
| Compliance | ASTM, ISO, GB, USP, FDA 21 CFR Part 11 (via Bluehill® Universal), GLP/GMP-ready |
| Data Acquisition Rate | Up to 5 kHz (force, displacement, strain synchronized) |
| Force Accuracy | ±0.5% of reading from 0.1% to 100% FS (with 2580 series load cells, Advanced Performance option) |
| Displacement Accuracy | ±0.01 mm or 0.05% of reading (whichever is greater) |
| Strain Accuracy | Compliant with ASTM E83, ISO 9513, EN 10002-4, BS 3846 |
| Operating Temperature | 5–40°C |
| Power Supply | 100–240 VAC ±10%, 47–63 Hz |
| IP Rating | IP2X |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer | Instron Corporation |
| Model | 68TM-100 |
| Load Capacity | 100 kN |
| Load Accuracy | ±0.5% of reading (down to 0.1% FS with 2580 series transducers, Advanced Performance option) |
| Position Resolution | 2.69 nm |
| Crosshead Travel | 1097 mm (E1) / 1582 mm (E2) |
| Vertical Test Space | 1168 mm (E1) / 1672 mm (E2) |
| Horizontal Test Space | 420 mm |
| Speed Range | 0.001–508 mm/min |
| Data Acquisition Rate | Up to 5 kHz (synchronized force, displacement, strain) |
| Compliance | ASTM E4, E8, E9, E21, ISO 6892-1, ISO 7500-1, GB/T 228.1, EN 10002-4, ISO 9513 |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Models | 8871, 8872, 8874, 8801 |
| Pricing | Available Upon Request |
| Brand | Instron |
|---|---|
| Origin | United Kingdom |
| Manufacturer | Instron (UK) Ltd. |
| Type | Electro-hydraulic servo fatigue testing machine |
| Maximum Test Load | ±100 kN |
| Frame Weight | 625 kg |
| Actuator Stroke | ±150 mm |
| Footprint | < 0.5 m² |
| Controller | 8800MT Digital Controller with 19-bit resolution |
| Brand | Instron |
|---|---|
| Origin | United Kingdom |
| Manufacturer | Instron (UK) Ltd. |
| Type | Electro-Hydraulic Servo Fatigue Testing Machine |
| Maximum Test Load | ±250 kN |
| Frame Weight | 1330 kg |
| Footprint | < 1.2 m² |
| Stroke | 150 mm |
| Actuator Type | Dual-acting servo-hydraulic cylinder with hydrostatic bearings |
| Load Cell Technology | Dynacell™ |
| Controller | Instron 8800MT Digital Controller |
| Software Platform | WaveMatrix™ (dynamic), Bluehill® (quasi-static), LCF & Fracture Mechanics Add-ons |
| Compliance | ASTM E4, E8, E606, E647, ISO 1099, ISO 6892-1, USP <1089>, FDA 21 CFR Part 11 (with audit trail enabled) |
| Brand | Instron |
|---|---|
| Origin | United Kingdom |
| Manufacturer | Instron Corporation |
| Type | Electro-Hydraulic Servo Fatigue Testing Machine |
| Maximum Test Load | ±500 kN |
| Frame Weight | 2450 kg |
| Actuator Stroke | 250 mm |
| Footprint | < 1.6 m² |
| Controller | Instron 8800MT Digital Controller |
| Compatible Power Unit | 3520 Series Hydraulic Power Supply |
| Load Cell Technology | Patented Dynacell™ |
| Frame Configuration | Dual-Column, Floor-Mounted, High-Stiffness Precision-Aligned |
| Bearing Type | Hydrostatic Bearing Actuator |
| Crosshead Adjustment | Hydraulic Elevating and Locking System |
| Software Platform | WaveMatrix (dynamic), Bluehill® (static), LCF/Fracture Mechanics Add-ons |
| Compliance | ASTM E4, E8, E606, E647, E1820 |
| Brand | Instron |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | 8862 |
| Instrument Type | Electro-Mechanical Servo Fatigue Testing System |
| Maximum Test Load | 100 kN |
| Frame Weight | 1458 kg |
| Brand | Instron |
|---|---|
| Origin | United Kingdom |
| Manufacturer | Instron Corporation |
| Type | Electro-Hydraulic Servo Fatigue Testing Machine |
| Maximum Test Load | ±25 kN |
| Frame Weight | 287 kg |
| Footprint | < 0.4 m² |
| Actuator Stroke | 100 mm |
| Actuator Mounting | Upper Crosshead |
| Frame Configuration | Dual-Column, High-Stiffness, Precision-Aligned |
| Load Cell Technology | Patented Dynacell™ |
| Controller | Instron 8800MT Digital Controller |
| Compatible Power Unit | 3520 Series Hydraulic Power Supply |
| Software Platform | WaveMatrix (dynamic), Bluehill (static), Fracture Mechanics Add-on |
| Brand | Instron |
|---|---|
| Origin | United Kingdom |
| Manufacturer | Instron (UK) Ltd. |
| Type | Electro-hydraulic servo fatigue testing system |
| Model | 8874 |
| Maximum axial force | ±25 kN |
| Maximum torque | ±100 N·m |
| Axial stroke | 100 mm |
| Torsional range | ±130° |
| Frame stiffness | High-rigidity dual-column architecture |
| Footprint | < 0.4 m² |
| Frame weight | 287 kg |
| Controller | 8800MT dual-axis digital controller with 19-bit resolution |
| Load cell technology | Patented Dynacell™ integrated load cell |
| Actuator location | Upper crosshead-mounted bidirectional servo actuator |
| Crosshead adjustment | Hydraulic lift + manual locking |
| Compatible power unit | 3520 Series hydraulic power supply |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 9400 Series |
| Pricing | Available Upon Request |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | AutoInjector |
| Instrument Type | Electromechanical Universal Testing Machine |
| Compliance | ISO 11608, FDA 21 CFR Part 11, ISO 13485, ISO/IEC 17025, GMP/GLP-ready |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | AutoX 750 |
| Pricing | Upon Request |
| Brand | Instron |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | AutoXBiax |
| Pricing | Upon Request |