Thermo Fisher Scientific Finnpipette Novus Electric Single-Channel Pipette

Overview

The Thermo Fisher Scientific Finnpipette Novus is an electric single-channel pipette engineered for precision, repeatability, and ergonomic sustainability in high-throughput and regulated laboratory environments. Based on brushless DC motor actuation and closed-loop position sensing, the Novus delivers consistent piston displacement across its 1–10 µL volume range—optimized for low-volume applications including qPCR setup, NGS library preparation, ELISA assay development, and cell culture reagent handling. Its design adheres to ISO 8655-2:2022 (volumetric performance) and ISO 8655-5:2022 (electronic pipettes), ensuring metrological traceability without requiring factory return for recalibration. Unlike manual or semi-automated alternatives, the Novus eliminates operator-induced variability from thumb pressure, stroke velocity, and plunger release timing—critical for GLP/GMP-aligned workflows where inter-operator reproducibility must meet ≤1% CV thresholds.

Key Features

• In-lab calibration capability: Full calibration verification and adjustment performed directly at the bench using integrated software routines; no external tools or service visits required. Calibration logs—including date, technician ID (user-defined), and deviation values—are stored internally and exportable via USB.
• Graphical user interface (GUI): High-contrast backlit LCD with hierarchical menu structure, scroll-based navigation, and full-function labeling (e.g., “Reverse Pipetting”, “Multiple Dispense – 5×”). Four tactile buttons enable one-handed operation even with gloves.
• Programmable pipetting modes: Ten preconfigured protocols—including variable-volume dispensing, serial dilution, mixing-in-tip, and customizable stepwise aspiration—accessible via dedicated soft keys or menu selection.
• Adjustable aspiration/dispense kinetics: Nine independent speed settings allow optimization for viscous, volatile, or foaming liquids—reducing bubble formation and improving tip sealing integrity.
• Ergonomic architecture: Center-of-mass positioned at the palm’s natural grip zone; 15° forward tilt of display enables direct line-of-sight without neck flexion; integrated finger rest reduces ulnar deviation during repetitive use.
• Autoclavable components: Tip cone, ejector shaft, and O-ring assembly withstand standard steam sterilization (121 °C, 20 min, 1 bar), supporting aseptic technique in cell biology and microbiology labs.

Sample Compatibility & Compliance

The Finnpipette Novus is compatible with universal low-retention and filtered tips meeting ISO 8655-3 specifications (e.g., 10–200 µL tip formats used with adapters for sub-10 µL accuracy). It supports both standard and high-precision tip geometries, with automatic tip detection logic minimizing air-gap errors. Regulatory alignment includes full documentation support for FDA 21 CFR Part 11 compliance when paired with Thermo Fisher’s optional LabTrack™ software suite—enabling electronic signatures, audit trails, and secure user access controls. All firmware updates are digitally signed and validated prior to installation, satisfying IEC 62304 Class B medical device software requirements.

Software & Data Management

Internal memory retains ≥500 calibration events and ≥1,000 pipetting cycle logs (timestamped, volume-tagged, mode-coded). Data export is supported via micro-USB to CSV or XML formats for integration into LIMS or ELN platforms. Optional connectivity modules enable Bluetooth 5.0 pairing with Thermo Fisher’s Pipette Manager app (iOS/Android), enabling remote firmware updates, usage analytics (e.g., cycles/day, error rate trends), and preventive maintenance alerts based on cumulative actuation count.

Applications

• Quantitative nucleic acid handling in molecular diagnostics and genomics core facilities
• Preparation of calibration standards and reference materials under ISO/IEC 17025 accreditation
• High-sensitivity immunoassays requiring strict coefficient-of-variation control (e.g., <2% CV at 5 µL)
• Aseptic reagent dispensing in stem cell and primary culture workflows
• Method transfer validation between QC laboratories operating under ICH Q5A/Q5B guidelines

FAQ

Does the Finnpipette Novus require annual factory recalibration?
No. The instrument supports full in-lab calibration per ISO 8655-5, including linearity verification across three points (10%, 50%, and 100% of nominal volume) using certified gravimetric standards.
Can it be used with positive-displacement tips?
Yes—when configured in reverse pipetting mode with appropriate tip adapters, though volumetric accuracy remains validated only with air-displacement tips per ISO 8655-2.
Is battery life sufficient for full-shift operation?
A fully charged lithium-polymer battery supports ≥2,500 pipetting cycles (10 µL, forward mode) before recharge; battery status is displayed as a 4-segment icon with low-power warning at ≤15% remaining.
How is user authentication managed for audit-trail compliance?
Local user profiles (up to 10) store initials and role designation; all calibration and configuration changes are time-stamped and linked to active profile IDs—exportable as tamper-evident CSV logs.
What is the recommended recalibration interval under GLP conditions?
Thermo Fisher recommends calibration verification every 3 months for daily-use instruments, or after 10,000 cycles—whichever occurs first—as documented in the instrument’s SOP template (PN 88001234).