PerkinElmer AutoSystem GC with PID-ELCD Detector
| Brand | PerkinElmer |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | PID-ELCD |
| Product Category | Chromatography |
| Operational Age | 5–7 Years |
| Warranty Period | 6 Months |
| Condition | Refurbished & Fully Tested |
Overview
The PerkinElmer AutoSystem GC with PID-ELCD Detector is a robust, benchtop gas chromatography system engineered for reliable separation and selective detection of volatile and semi-volatile organic compounds. Designed for laboratories requiring trace-level analysis in environmental, industrial hygiene, and quality control applications, this configuration integrates a Photoionization Detector (PID) with an Electrolytic Conductivity Detector (ELCD) — enabling simultaneous or sequential detection of aromatic hydrocarbons, chlorinated solvents, amines, sulfur-containing species, and other electron-rich or electronegative analytes. The AutoSystem platform features a precision temperature-controlled oven, programmable inlet systems (including split/splitless injection), and a stable pneumatic control architecture optimized for reproducible retention time alignment and baseline stability. All refurbished units undergo full functional validation per PerkinElmer OEM specifications, including leak testing, detector sensitivity verification, and column performance benchmarking using certified reference standards.
Key Features
- Fully refurbished AutoSystem GC chassis with factory-aligned electronics, calibrated flow controllers, and verified thermal management subsystems
- Dual-detector capability: Integrated PID (10.6 eV lamp) for low-ppb detection of aromatics and alkenes; ELCD optimized for halogenated and nitro-compounds with sub-ppb sensitivity
- Temperature-programmable oven (ambient to 350 °C, ±0.1 °C stability) with ramp rates up to 40 °C/min
- Electronic pressure control (EPC) for carrier gas (He, H₂, N₂) and auxiliary gases, ensuring consistent flow accuracy across method sequences
- Compatible with standard 0.53 mm and 0.32 mm ID capillary columns (up to 60 m length); supports both packed and fused-silica configurations
- Refurbishment includes replacement of critical consumables: septa, liner O-rings, detector filaments, and GC oven insulation
- 6-month limited warranty covering detector response linearity, baseline noise (<0.5 pA RMS), and retention time repeatability (RSD <0.05% over 10 injections)
Sample Compatibility & Compliance
This system is validated for use with EPA Methods 8021B (aromatics), 8010B (PAHs), 8260D (VOCs), and ASTM D5504 (sulfur compounds), supporting compliance-driven workflows in regulated environments. The PID-ELCD combination satisfies dual-detection requirements for multi-analyte screening without column switching or hardware reconfiguration. All refurbished units are documented per ISO/IEC 17025:2017 guidelines for equipment qualification, including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ) reports. Data integrity aligns with FDA 21 CFR Part 11 principles through secure user access controls and audit-trail-enabled software operation (when paired with TurboMass or third-party compliant acquisition platforms).
Software & Data Management
The AutoSystem GC operates natively with PerkinElmer TurboMass v6.x or later (not included but available separately), supporting method development, sequence scheduling, peak integration, and spectral library matching. Raw data files (.RAW) are fully compatible with OpenLab CDS, Chromeleon, and AIA-compliant third-party processing tools. Refurbished systems include firmware updated to the latest stable release (v3.2.1 or higher), ensuring compatibility with modern Windows OS platforms (Windows 10/11 64-bit). Audit trails record all method changes, calibration events, and detector parameter adjustments — supporting GLP/GMP documentation requirements. Export formats include CSV, PDF, and XML for LIMS integration.
Applications
- Environmental monitoring: Soil/water VOC screening, landfill gas composition, indoor air quality assessment
- Occupational health & safety: Workplace exposure limit (WEL) verification for benzene, toluene, xylene, chloroform, and vinyl chloride
- Pharmaceutical excipient purity testing: Residual solvent analysis per ICH Q3C guidelines
- Petrochemical QA/QC: Hydrocarbon fingerprinting, additive quantification, and sulfur speciation in fuels
- Forensic toxicology: Rapid identification of ignitable liquids in fire debris samples
FAQ
Is the original PerkinElmer factory calibration certificate included?
Yes — each unit ships with a traceable calibration report referencing NIST-traceable standards, documenting detector response factors, retention index verification, and system suitability test results.
Can this system be upgraded to support autosampler integration?
Yes — the AutoSystem GC chassis is compatible with the PerkinElmer AS-100 or AS-200 series autosamplers; mechanical mounting brackets and interface cables are available as optional accessories.
What consumables are provided with the instrument?
Included: One set of inlet septa, two glass liners, one deactivation kit for liner cleaning, and detector-specific spare filaments (PID and ELCD). Column installation kits and gas filters are sold separately.
Is remote diagnostics support available during the warranty period?
Yes — SpectraLab Scientific provides remote troubleshooting via TeamViewer or AnyDesk during business hours (EST), backed by direct OEM-part sourcing channels for expedited component replacement.
