- All
- Favorite
- Popular
- Most rated
| Brand | Geonica |
|---|---|
| Origin | Spain |
| Model | SunTracker-3000 |
| Power Consumption | <3 W |
| Azimuth & Elevation Accuracy | 0.1° (passive), 0.02° (active with optional radiometer feedback) |
| Payload Capacity | 30 kg |
| Operating Temperature | -20 to +60 °C |
| Relative Humidity | 0–100% RH |
| Weight | 25 kg |
| Dimensions | 460 × 490 × 490 mm |
| Drive Mechanism | Precision worm-gear train |
| Torque | 35 N·m |
| Angular Velocity | 9.4°/s |
| Angular Acceleration | 136.4°/s² |
| Mounting | Tripod base with dual bubble levels |
| Housing Material | Rust-resistant aluminum alloy, 304 stainless steel worm, bronze gear |
| Communication Interface | RS-485 (external control module), RS-232/422/485 & Ethernet (METEODATA data logger) |
| Time Synchronization | Internet NTP or integrated GPS receiver |
| Positioning Update Rate | Real-time, 1 Hz (solar zenith and azimuth) |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | TM275LHW |
| Power Output | 1000 W |
| Operating Frequency Bands | Low Band 42–65 kHz (beam width 25°–16°), High Wideband 150–250 kHz (constant 25° beam width) |
| Max Depth Range | 914 m (low band), 152 m (high wideband) |
| Beam Mounting Angle Adjustment | 3°–21° |
| Housing Material | SEALCAST™ seamless polyurethane encapsulation |
| Mounting Type | Transom-mount stainless steel bracket |
| Sensor Weight | 4 kg |
| Compatible Hull Types | All hull materials (fiberglass, aluminum, wood, composites) |
| Hull Length Requirement | ≥10 m |
| Temperature Sensor | Integrated fast-response thermistor |
| Total Frequency Span | 123 kHz |
| Brand | Campbell Scientific |
|---|---|
| Model | CR800 |
| Origin | USA |
| Differential Input Channels | 3 (6 single-ended) |
| Analog Input Resolution | 13-bit A/D |
| Scan Rate | Up to 100 Hz |
| Operating Temperature Range | 0 to 40 °C |
| Voltage Measurement Resolution | 0.33 µV |
| Sleep Mode Current Draw | ~0.6 mA |
| Active Current Draw (w/o RS-232) | 1–16 mA |
| Active Current Draw (w/ RS-232) | 17–28 mA |
| Communication Interfaces | 1 × CS I/O port, 1 × RS-232 serial port |
| Supported Protocols | PakBus®, Modbus RTU/ASCII, SDI-12, SDM, DNP3, FTP, HTTP, XML, POP3, SMTP, Telnet, NTCIP, NTP |
| Onboard Memory | 4 MB (data + program storage) |
| Data Format | Tabular ASCII |
| Operating System | PakBus OS |
| Compatible Software | LoggerNet, PC400, Short Cut |
| Optional Peripheral | CR1000KD handheld display |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | M265LM |
| Frequency Bands | Low Band 42–65 kHz (Beamwidth 25°–16°), Medium Band 85–135 kHz (Beamwidth 16°–11°) |
| Output Power | 1000 W |
| Installation Type | In-hull Mount |
| Housing Material | Polyurethane Encapsulated Plastic |
| Transducer Window | Polyurethane |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Weight | 6.2 kg |
| Total Bandwidth | 73 kHz |
| Compatible Frequencies | 50 kHz, 88 kHz, 107 kHz |
| Hull Compatibility | Solid Fiberglass Hulls Only |
| Proprietary Technology | Xducer ID® |
| Brand | RainWise |
|---|---|
| Origin | USA |
| Model | PG/H |
| Construction | Anodized aluminum housing, stainless steel components, low-surface-tension polymer tipping bucket |
| Heating | Integrated thermostatically controlled heater (activates below 1°C) |
| Switch Type | Reed switch |
| Output | Momentary closure pulse (< 0.1 s duration) |
| Resolution Options | 0.1 mm, 0.2 mm, or 0.25 mm per tip |
| Accuracy | ±0.5% at 12.5 mm/h rainfall rate |
| Dimensions | 21.9 cm diameter × 31.75 mm height |
| Compliance | Designed for continuous outdoor deployment in accordance with WMO Guide to Instruments and Methods of Observation (CIMO Guide), ISO 9060:2018 Class B performance expectations for precipitation measurement |
| Brand | R.M. Young |
|---|---|
| Origin | USA |
| Model | 41502 |
| Material | UV-stabilized white thermoplastic housing, anodized aluminum support frame, stainless steel mounting hardware |
| Dimensions | 20 cm (diameter) × 33 cm (height) |
| Net Weight | 1.1 kg |
| Shipping Weight | ~2.7 kg |
| Power Supply | 12–14 VDC @ 500 mA |
| Airflow Rate | 5–11 m/s (16–35 ft/s), dependent on sensor power draw |
| Radiative Error (Temperature) | ≤0.2 °C RMS at 1000 W/m² solar irradiance |
| Delta-T Error | ≤0.05 °C RMS under identical shielding exposure |
| Fan Lifetime | >80,000 hours continuous operation at 25°C |
| Sensor Compatibility | RTD-based temperature probes (e.g., 41342), combined RH/T probes (e.g., 41382) |
| Output Options | 4–20 mA or 0–1 VDC |
| Operating Environment | Outdoor, all-weather, low-wind-speed microclimates |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | DX900+ |
| Operating Frequency | 360 kHz |
| Depth Range | 60 m |
| Longitudinal Speed Range | ±60 knots |
| Transverse Speed Range | ±6 knots |
| Speed Accuracy | ±0.1 knots (≤10 kn), ±1% (>10 kn) |
| Speed Resolution | 0.01 knots |
| Temperature Accuracy | ±0.5 °C |
| Data Update Rate | up to 10 Hz |
| Operating Temperature | −15 °C to +55 °C |
| Power Supply | 9–16 VDC |
| Power Consumption | 5.0 W (DST variant), 2.5 W (ST variant) |
| Cable Length | 3 m (DST), 6 m (ST) |
| NMEA 2000® Load Equivalent Number (LEN) | 10 |
| Weight | 1 kg |
| Housing Material | Marine-grade corrosion-resistant alloy |
| Output Protocols | NMEA 0183 (ST), NMEA 2000® (DST) |
| Wireless Interface | Bluetooth 5.0 for AIRMAR CAST™ app |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B164 |
| Operating Frequencies | 50 kHz / 200 kHz |
| Beamwidth | 22° × 20° @ 50 kHz |
| Output Power | 1000 W |
| Mounting Type | Through-Hull (Low-Profile) |
| Housing Material | Bronze |
| Transducer Window | Polyurethane |
| Hole Diameter | 95 mm |
| Shaft Length | 71 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Tilt Options | 0°, 12°, or 20° |
| Maximum Hull Angle | 24° |
| Weight | 1.4 kg |
| Brand | R.M. Young |
|---|---|
| Origin | USA |
| Model | 05305 |
| Instrument Type | Cup Anemometer & Wind Vane Sensor |
| Resolution | 0.1 m/s |
| Measurement Range | 0–50 m/s (wind speed), 0–360° (wind direction) |
| Accuracy | ±0.2 m/s or ±1% of reading (wind speed), ±3° (wind direction) |
| Startup Wind Speed | 0.4 m/s (cup), 0.5 m/s (vane) |
| Operating Temperature | −50°C to +50°C |
| Operating Humidity | 0–100% RH |
| Output Options | AC pulse (3 pulses/rev), 0–5 VDC, or 4–20 mA |
| Housing Material | UV-stabilized polymer with stainless steel and anodized aluminum hardware |
| Bearing Type | Precision stainless steel ball bearings |
| Compliance | EPA PSD Guidelines, NRC RG 1.23, ANSI/ANS-18.1 |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | 33-627-02 |
| Measurement Range | 10–95% RH |
| Accuracy | ±5% RH |
| Resolution | 1% RH |
| IP Rating (when installed) | IPX4 |
| Compatible Systems | Airmar 110WX, 120WX, 150WX, 200WX, 220WX Weather Stations |
| Brand | Gill |
|---|---|
| Origin | United Kingdom |
| Model | Metpak |
| Instrument Type | Portable Weather Station |
| Enclosure Rating | IP65 |
| Operating Temperature | −35 °C to +70 °C |
| Power Supply | 5–30 V DC (<16 mA @ 12 V, 1 Hz output) |
| Wind Measurement | Ultrasonic (no moving parts) |
| Wind Speed Range | 0–60 m/s |
| Wind Direction Range | 0–359° |
| Wind Accuracy | ±2% @ 12 m/s (speed), ±3° @ 12 m/s (direction) |
| Air Temperature Sensor | Pt100 1/3 Class B |
| Temp Range | −35 °C to +70 °C |
| Temp Accuracy | ±0.1 °C |
| Relative Humidity Sensor | Rotronic HygroClip HC2-53 |
| RH Range | 0–100% RH |
| RH Accuracy | ±0.8% RH @ 23 °C |
| Barometric Pressure Sensor | High-precision capacitive |
| Pressure Range | 600–1100 hPa |
| Pressure Accuracy | ±0.5 hPa |
| Dew Point Accuracy | ±0.15 °C (at 23 °C ambient, 20 °C dew point) |
| Output Protocols | ASCII, NMEA 0183, SDI-12 v1.3, Modbus RTU/ASCII |
| Communication Interfaces | RS232, RS422, RS485 (2-wire), SDI-12 |
| Baud Rates | 4800–57600 (ASCII), 1200 (SDI-12) |
| Data Update Intervals | 1 s, 2 s, 4 s, or polled |
| Mounting | Anodized aluminum U-bracket for vertical masts Ø30–58 mm |
| Weight | 2.1 kg (including bracket) |
| Materials | UV-stabilized white engineering plastic housing, anodized aluminum mounting hardware |
| Brand | GILL |
|---|---|
| Origin | United Kingdom |
| Model | MetPak Pro |
| Instrument Type | Portable Weather Station |
| Enclosure Rating | IP65 |
| Operating Temperature | −35°C to +70°C |
| Power Supply | 5–30 VDC (<26 mA @12 V, 1 Hz output) |
| Communication Interfaces | RS232 / RS422 / RS485 (2-wire) / SDI-12 (user-selectable) |
| Output Protocols | ASCII, SDI-12 v1.3, NMEA 0183, Modbus RTU/ASCII |
| Data Logging Interval | 1 s / 2 s / 4 s / polled mode |
| Analog Inputs | 2 channels (0–5 V, 4–20 mA, or self-powered) |
| PT100 Input | 4-wire, IEC 60751 Class B compliant |
| Digital Input | Reed-switch or contact-closure for tipping-bucket rain gauge (up to 10 Hz) |
| ADC Resolution | 12-bit, ±0.1% of reading + 35 µV offset compensation |
| Wind Measurement | Ultrasonic (GILL WindSonic), 0–60 m/s, 0–359°, ±2% @12 m/s (wind speed), ±3° @12 m/s (wind direction), resolution 0.01 m/s / 1° |
| Air Temperature | Pt100, −35°C to +70°C, ±0.1°C accuracy, 0.1°C resolution |
| Relative Humidity | Rotronic HygroClip probe, 0–100% RH, ±0.8% RH @23°C, 0.1% RH resolution |
| Atmospheric Pressure | Barometric sensor, 600–1100 hPa, ±0.5 hPa, 0.1 hPa resolution |
| Dew Point Temperature | Calculated, ±0.15°C accuracy @23°C ambient / 20°C dew point, 0.1°C resolution |
| Brand | dataTaker |
|---|---|
| Origin | Imported |
| Model | DT82I |
| Analog Inputs | 6 single-ended / 4 differential / 2 three- or four-wire |
| Resolution | 18-bit |
| Sampling Rate | up to 40 Hz |
| Analog Output | 16-bit DAC, 0–10 V or 0–20 mA |
| Excitation Outputs | 5 V / 12 V selectable, max. 150 mA |
| Digital I/O & Counter | 32-bit, up to 100 kHz |
| Communication Ports | RJ45, RS232 (host), RS232/RS485/RS422 |
| Protocols | MODBUS RTU (master/slave), MODBUS TCP/IP, ASCII, SDI12 |
| Power Supply | 10–30 VDC |
| Operating Temperature | −40 to +70 °C |
| Enclosure Rating | IP54 |
| Dimensions | 180 × 137 × 65 mm |
| Weight | 900 g |
| Internal Storage | 128 MB CompactFlash (upgradable to 4 GB), optional 8 GB USB storage |
| Real-Time Clock Accuracy | ±1 min/year (0–40 °C), ±4 min/year (−40–70 °C) |
| Built-in Battery | 6 V @ 1.2 Ah |
| Brand | Vaisala |
|---|---|
| Origin | Finland |
| Model | PWD22 |
| Visibility Measurement Range (MOR) | 10–20,000 m |
| Accuracy | ±10% (10 m–10 km), ±15% (10–20 km) |
| Precipitation Detection Sensitivity | ≤0.05 mm/h (within 10 min) |
| Operating Temperature | −40 °C to +60 °C |
| Power Supply | 12–50 VDC (electronics) |
| Power Consumption | 2 W (standard), 65 W (with heater) |
| Output Interface | RS-232 / RS-485 |
| Dimensions | 40.4 × 69.5 × 19.9 cm |
| Weight | 3 kg |
| Ingress Protection | IP66 |
| EMC Compliance | CISPR 16-1/-2, IEC 61000-4-2/-3/-4/-5/-6 |
| Weather Type Recognition | 7 precipitation types (rain, freezing rain, drizzle, freezing drizzle, rain/snow mix, snow, sleet), fog, haze (smoke, dust), clear sky |
| Reporting Standards | WMO FM-12 (SYNOP), FM-15 (METAR), NWS code tables |
| Precipitation Measurement | Intensity, accumulation, new snow depth estimation |
| Optical Principle | Forward scatter |
| Calibration Reference | Certified atmospheric transmissometer traceable to national standards |
| Brand | Belfort (USA) |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Model 6000 |
| Price | USD 9,200 (FOB US Port) |
| Discontinued — Replacement Model | Model 6400 |
| Measurement Principle | Forward Scatter (42° scattering angle) |
| Range | 6 m to 80 km |
| Accuracy | ±10% or ±3 m (whichever greater) |
| Light Source | High-output infrared LED |
| Analog Outputs | 0–1 V, 0–5 V, 0–10 V, 4–20 mA |
| Alarm Outputs | 2-channel TTL (user-configurable thresholds) |
| Digital Interface | RS-232 / RS-422, 300–38,400 baud |
| Operating Temperature | −40 °C to +55 °C |
| Relative Humidity | 0–100 % RH |
| Power Supply | 110 VAC / 220–240 VAC / 12 VDC |
| Power Consumption | 12 W (standard), 17 W (with Ambient Light Sensor), 25 W (with heated shroud) |
| Dimensions | 978 mm × 343 mm × 425 mm |
| Weight | 8.75 kg |
| Mounting | U-bolt bracket |
| Max Wind Speed Tolerance | 60 m/s |
| Housing Material | Corrosion-resistant aluminum alloy |
| Lens Heater | Standard |
| Optional Heated Shroud | Available (Part No. 96916-01) |
| Calibration Kit | Optional (Part No. 90001) |
| Compliance | CE Marked |
| FCC Compliance | 47 CFR Part 15 |
| Environmental Certification | IP65 equivalent |
| Brand | Hukseflux |
|---|---|
| Origin | Netherlands |
| Model | SR20 |
| Calibration Traceability | World Radiometric Reference (WRR) |
| ISO 9060 | 2018 Classification: Secondary Standard |
| Measurement Range | 0–4000 W/m² |
| Spectral Range | 285–3000 nm |
| Sensitivity | 15 × 10⁻⁶ V/(W/m²) |
| Calibration Uncertainty | < 1.2 % (k = 2) |
| Zero Offset (a) | < 5 W/m² (unventilated), 2.5 W/m² (with VU01 ventilation unit) |
| Operating Temperature | −40 to +80 °C |
| Temperature Response | < ±1 % (−10 to +40 °C) |
| Directional Response Report | Included |
| Temperature Dependence Characterization | Individual quadratic polynomial provided per unit |
| Heating Power | 1.5 W @ 12 VDC |
| Output Signal | Analog voltage (mV) |
| Supply Voltage | 8–30 VDC |
| Integrated Temperature Sensor | Pt100 or 10 kΩ thermistor |
| Cable Length | 5 m (extendable in 5-m increments) |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | ST850 |
| Output | NMEA 2000® or Analog (selectable) |
| Speed Range | 2–45 knots (2–52 MPH) |
| Temperature Accuracy | ±0.5°C |
| Operating Temp | −10°C to +40°C |
| Sampling Interval | 1 s |
| Pressure Rating | 3 m |
| Transducer Window Material | Polyurethane |
| Hull Tilt Limit | ≤22° |
| Pulse Frequency | 17,000 p/nm (4.8 Hz per knot) |
| Supply Voltage | 9–16 VDC |
| Current Draw | <200 mA |
| NMEA 2000 LEN | 2 |
| Compliance | IEC 60945 |
| Weight (Plastic/Bronze/Stainless) | 0.7 / 1.3 / 1.6 kg |
| Standard Cables | 6 m NMEA 2000, 9 m Analog |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | P39 |
| Operating Frequency | 235 kHz |
| Mounting Type | Through-Hull Beam-Mount |
| Depth Range | 0.5–100 m (NMEA 0183), 0.5–150 m (NMEA 2000) |
| Speed Sensing | Paddlewheel with Grooved Flow Channel |
| Temperature Range | −10 to +40 °C |
| Temp Accuracy | ±0.5 °C |
| Beam Angle Adjustment | 0°–22° |
| Weight | 0.5 kg |
| Pressure Rating | 3 m |
| Pulse Resolution | 20,000 pulses per nautical mile |
| Power Supply | 10–28 VDC (NMEA 0183), 9–16 VDC (NMEA 2000) |
| Current Draw | <40 mA (NMEA 0183), <200 mA (NMEA 2000) |
| NMEA 2000 LEN | 4 |
| Compliance | IEC 60945 |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | CM599LH |
| Frequency Bands | Low Band 28–60 kHz (Beamwidth 23°–9°), High Band 130–210 kHz (Beamwidth 8°–4°) |
| Total Bandwidth | 112 kHz |
| Transmit Power | 2000–3000 W |
| Mounting Type | In-Tank Installation |
| Hull Compatibility | Solid Fiberglass |
| Enclosure Material | Epoxy-Resin Housing |
| Weight | 13.73 kg |
| Cable Length | 10 m |
| Integrated Temperature Sensor | No |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | UST850 |
| Output Protocols | NMEA 0183, NMEA 2000® |
| Speed Range | 0.1–50 knots |
| Operating Temperature | −4 to 40 °C |
| Transmit Frequency | 4.5 MHz |
| Pulse Repetition Frequency | 0.5–12 kHz (adaptive) |
| Supply Voltage | 9–16 VDC |
| Average Current Draw | 125 mA @ 12 VDC |
| Housing Material | Plastic / Bronze / Stainless Steel |
| Through-Hull Diameter | 51 mm |
| Weight | 1.4 kg (plastic), 1.8 kg (bronze) |
| Brand | Vaisala |
|---|---|
| Origin | Finland |
| Model | WXT534 |
| Instrument Type | Portable Weather Station |
| Temperature Range | −52 to +60 °C |
| Relative Humidity Range | 0–100 %RH |
| Atmospheric Pressure Range | 600–1100 hPa |
| Temp. Resolution | 0.1 °C |
| RH Resolution | 0.1 %RH |
| Pressure Resolution | 0.1 hPa |
| Temp. Accuracy | ±0.3 °C @ 20 °C |
| RH Accuracy | ±3 %RH (0–90 %RH), ±5 %RH (90–100 %RH) |
| Pressure Accuracy | ±0.5 hPa (0–30 °C) |
| Output Options | SDI-12 v1.3, RS-232, RS-485, RS-422 |
| Communication Protocols | ASCII auto/polling, NMEA 0183 v3.0 |
| Power Supply | 6–24 VDC |
| Avg. Current Consumption | 0.1 mA (SDI-12 standby), 3 mA (typical, default interval), 15 mA (max, continuous measurement) |
| Heater Supply | 12–24 VDC / 12–17 VAC |
| Heater Current | 0.8 A @ 12 VDC, 0.4 A @ 24 VAC |
| Enclosure Rating | IP65 (without mounting adapter), IP66 (with mounting adapter) |
| Operating Temp. | −52 to +60 °C |
| Storage Temp. | −60 to +70 °C |
| Weight | <1.2 kg |
| Dimensions | Ø140 × 200 mm |
| Brand | HORIBA |
|---|---|
| Origin | USA |
| Model | D-50 |
| Measurement Parameters | pH, Temperature, ORP, Conductivity (D-54), Dissolved Oxygen (D-55), Ion Selective Electrode (ISE) capability (D-53) |
| Enclosure Rating | IP67 |
| Power Supply | DC 3 V (LR6 batteries) |
| Weight | 300–330 g |
| Interface | RS-232C for PC/printer connectivity |
| Display | Backlit LCD with dual-channel readout |
| Data Logging | Automatic storage with timestamp |
| Self-Diagnostic Function | Yes |
| Electrode Compatibility | Ruggedized waterproof pH/ORP probes, interchangeable sensor modules |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | M260 |
| Power Output | 1000 W |
| Operating Frequencies | 50 kHz / 200 kHz |
| Beamwidth | 19° @ 50 kHz / 6° @ 200 kHz |
| Installation Type | In-hull (through-hull cavity mount) |
| Housing Material | Polyurethane & plastic |
| Porthole Diameter | 30 mm |
| Mounting Stub Length | 121 mm |
| Cable Length | 10 m |
| Weight | 6.2 kg |
| Hull Tilt Compensation Range | 0–30° |
| Transducer Window Material | Polyurethane |
| Temperature Sensor | Not integrated |
| Compatible Hull Types | Fiberglass only |
| Minimum Vessel Length | 8 m |
| Proprietary Technology | XducerID® |
| Brand | R.M. Young |
|---|---|
| Origin | USA |
| Model | 41342 |
| Measurement Range | −50 to +50 °C |
| Accuracy (at 0 °C) | ±0.3 °C (standard), ±0.1 °C (optional) |
| Time Constant | 42 s (with 43408 radiation shield) |
| Sensor Type | 1000 Ω Pt RTD, 4-wire configuration |
| Output Options | Resistance (41342), 0–1 VDC (41342VC), 4–20 mA (41342LC) |
| Calibration | Selectable °C or °F |
| Recommended Radiation Shield | 43502 (aspirated) or 41003P (multi-plate passive) |
| Recommended Cable | 2-pair shielded, 22 AWG (P/N 18641) |
Show next