Jianhu JH-8006 Manual Single-Handle Tensile Tester Base (Without Force Gauge)
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Domestic Distributor |
| Product Origin | China |
| Model | JH-8006 |
| Pricing | Upon Request |
| Capacity | 50 kgf |
| Resolution | 1/200 |
| Stroke | 150 mm |
Overview
The Jianhu JH-8006 Manual Single-Handle Tensile Tester Base is a mechanically actuated, benchtop-scale testing platform engineered for controlled uniaxial tension applications in quality control and R&D environments. Unlike motorized or servo-controlled systems, this device relies on manual lever operation to generate consistent, repeatable displacement—ideal for low-throughput verification of mechanical integrity in small components. Its design follows fundamental principles of static force transmission: downward rotation of the single handle drives a precision-machined lead screw, translating rotational input into linear motion of the upper crosshead. The resulting displacement applies tensile load to specimens clamped between upper and lower fixtures. While the base unit does not include an integrated force transducer or digital readout (requiring external analog or digital force gauges), its rigid cast-aluminum frame, calibrated stroke limit, and standardized mounting interfaces ensure compatibility with third-party measurement modules compliant with ISO 7500-1 Class 2 accuracy requirements.
Key Features
- Rugged single-lever mechanical actuation system enabling precise manual control over loading rate and displacement
- Fixed stroke range of 150 mm with positive end-stop mechanism to prevent over-travel and preserve fixture alignment
- Standardized T-slot base plate (ISO 2768-mK tolerance) for secure mounting of interchangeable grips, extensometers, or custom fixtures
- Load capacity rated at 50 kgf (490.3 N), suitable for evaluation of polymer films, elastomeric gaskets, solder joints, thin-wire terminations, and miniature PCB connectors
- Resolution of 1:200 refers to mechanical advantage ratio—enabling detection of sub-gram-level force differentials when paired with appropriate external force sensing instrumentation
- Compact footprint (W × D × H ≈ 220 × 180 × 360 mm) optimized for integration into constrained laboratory workspaces or production line QC stations
Sample Compatibility & Compliance
The JH-8006 accommodates specimens with maximum dimensions of 80 mm width × 150 mm gauge length, supporting standard test geometries including dog-bone, straight-strip, and looped configurations. Grip options—including pneumatic, wedge-action, and pin-type—are mountable via M6 threaded inserts on both crossheads. The system supports ASTM D638 (plastics), ASTM D412 (rubber), and ISO 37 (vulcanized rubber) specimen preparation guidelines when used with certified external force measurement devices. As a mechanical base only, it does not carry CE marking or UL certification; however, its structural conformity with ISO 2041:2018 (mechanical testing terminology) and dimensional adherence to GB/T 228.1–2021 (Chinese national standard for metallic materials tensile testing) ensures traceability in domestic regulatory contexts.
Software & Data Management
This manual tester operates without embedded firmware or proprietary software. Force and displacement data acquisition is fully decoupled: users integrate compatible external sensors—such as USB-enabled digital force gauges (e.g., Mark-10 Series 5) or analog-output load cells interfaced via NI DAQ systems—into their existing data logging infrastructure. When paired with compliant instrumentation, the setup supports audit-ready data capture aligned with GLP/GMP documentation practices, including timestamped CSV export, user-access controls, and electronic signature capability (when implemented at the host software layer). No FDA 21 CFR Part 11 compliance is inherent to the base unit; validation responsibility resides with the end-user’s full measurement chain.
Applications
- Verification of peel strength in pressure-sensitive adhesives and laminated packaging substrates
- Tensile yield point assessment of injection-molded polypropylene housings and silicone encapsulants
- Break-point testing of micro-springs, crimped terminals, and flex-circuit bonding interfaces
- Evaluation of bond integrity in wire harness solder joints under controlled strain rates
- Comparative fatigue screening of thermoplastic elastomer seals under cyclic manual loading protocols
- Teaching laboratories for illustrating Hooke’s law, stress-strain relationships, and failure mode classification
FAQ
Does the JH-8006 include a built-in force measurement system?
No—the JH-8006 is supplied as a mechanical base only. A separate force gauge or load cell must be installed to quantify applied tension.
Can this tester be upgraded to motorized operation?
No—it lacks provisions for motor mounting, encoder integration, or power supply routing. It is designed exclusively for manual actuation.
What calibration documentation is provided?
A dimensional conformance certificate (per GB/T 19001–2016) is included; force calibration must be performed externally using NIST-traceable standards.
Is technical support available for international customers?
Yes—remote application guidance and mechanical maintenance documentation are provided in English upon request.
Are replacement grips or accessories available?
Standard M6-compatible grip sets, extension rods, and specimen alignment jigs are stocked and ship globally from Shanghai.
