- All
- Favorite
- Popular
- Most rated
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH-Series UV Aging Test Chamber |
| Quotation | Available upon Request |
| Humidity Range | ≥95% RH (in-chamber actual value) |
| UV Lamp Power | 40 W per lamp |
| Irradiance Range | 0.72 W/m² (at specimen surface, 340 nm nominal) |
| Exposure Time Setting | 1–9999 hours (programmable) |
| Illuminated Surface Temperature Range | Not specified in source data |
| Black Panel Temperature Range | Not specified in source data |
| UV Wavelength | UVA-340 nm (standard for accelerated solar simulation) |
| Internal Chamber Dimensions (L×W×H) | Not specified in source data |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-Server-Motherboard Environmental Test Chamber |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-based |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from 25 °C to +150 °C) |
| Cooling Rate | ≤45 min (from 25 °C to -40 °C), ≤60 min (to -55 °C), ≤80 min (to -70 °C) |
| Internal Chamber Dimensions | Customizable upon consultation |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | JH-Series High-Capacity Xenon Arc Weathering Test Chamber |
| Price Range | USD 1,280 – 12,800 |
| Xenon Lamp Power | 1.8 kW to 6 kW |
| Irradiance Range | 150 W/m² to 736 W/m² |
| Light Exposure Duration | 1–9999 hours |
| Humidity Control Range | 20%–95% RH |
| Brand | JiAnHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-DualChamber-EP-CT-Battery |
| Temperature Range | –40°C to +150°C (standard), ±0.3°C temperature uniformity |
| Explosion Protection Rating | EN 60079-1 (Flameproof Enclosure “d”) + EN 60079-28 (Optical Radiation) compliant dual-chamber architecture |
| Internal Volume | 100 L to 1000 L (customizable) |
| Control System | PID-based digital controller with real-time data logging and Ethernet/RS485 interface |
| Compliance | Meets ISO 12405-4, UN 38.3, IEC 62133-2, GB/T 31485, GB/T 31467.3, and supports GLP/GMP audit trails per FDA 21 CFR Part 11 requirements |
| Power Supply | 3-phase 380 VAC ±10%, 50/60 Hz |
| Key | Brand: Jinhoo |
|---|---|
| Model | JH-YP-2 |
| Anaerobic Transition Time (Sampling Chamber) | <5 min |
| Anaerobic Transition Time (Operating Chamber) | >60 min |
| Anaerobic Environment Retention (Operating Chamber, gas flow off) | >12 h |
| Temperature Range (Culture Chamber) | RT+3°C to 50°C |
| Temperature Stability | ±0.3°C |
| Temperature Uniformity | ±1.0°C |
| Power Supply | 220 V, 50 Hz, 600 W |
| Culture Chamber Internal Dimensions | 250 × 190 × 290 mm |
| Operating Chamber Internal Dimensions | 800 × 650 × 660 mm |
| Overall Dimensions | 1260 × 730 × 1380 mm |
| Construction | Stainless Steel Body, Tempered Safety Glass Front Window |
| Gas Control | Adjustable Flow Regulators, Catalytic Oxygen Scavenger, HEPA-Filtered Inlet Gas |
| UV Sterilization | Integrated Germicidal UV Lamp |
| Safety Features | Over-Temperature Protection, Microprocessor-Based PID Temperature Controller |
| Compliance | Designed for ISO 13485-aligned lab environments, compatible with GLP documentation workflows |
| Origin | China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | JH-7126 / JH-7125 |
| Table Dimensions (L×W) | 100×100 mm / 100×120 mm |
| Max Load Capacity | 100 kg |
| Frequency Range | 100–300 rpm |
| Amplitude | 25.4 mm |
| Timer Range | 0–99.99 h (selectable in s, min, or h) |
| Power Supply | 220 V AC, 50 Hz, 5 A |
| Compliance Basis | ASTM D4169, ISO 8564, ISTA 3A & 3E |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Series |
| Chamber Type | Upright |
| Cooling Method | Air-Cooled |
| Temperature Range | –70°C to +150°C |
| Humidity Range | 10–98% RH |
| Temperature Uniformity | ±1°C |
| Temperature Stability | ±0.5°C (typical), ±1°C (high-temp), ±2°C (low-temp) |
| Humidity Uniformity | ±3% RH |
| Humidity Stability | ±3% RH |
| Heating Rate | 1.0–3.0°C/min |
| Compliance | ISO 16750-4, ASTM D4332, IEC 60068-2-1/2/14/30, GB/T 10586, GB/T 2423.1–2423.3 |
| Customization | Fully configurable chamber volume, internal configuration, control logic, data logging, and interface protocols (Modbus TCP, RS485, Ethernet/IP) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | DH-Universal Drop Tester |
| Price Range | USD 170 – 1,700 |
| Drop Height Range | 0–1500 mm (Zero-Drop Capable) |
| Maximum Specimen Weight | 300 kg |
| Maximum Specimen Dimensions | 1200 × 1000 × 1200 mm |
| Impact Surface Dimensions | 2000 × 1500 mm |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | GB8410 |
| Compliance | GB 8410, FMVSS 302, ISO 3795, DIN 75200, SAE J369, TL 1010, NF P92-505, U.T.A.C. 18-502 T1, BMW N 60121.0, DBL 5307, GM L-T06-302G-79, Mitsubishi ES-X60410, VW TL 1010, Volvo STD 5031 |
| Burner Nozzle ID | 9.5 mm |
| Ignition Position Offset | 19 mm below specimen free end center |
| Combustion Chamber Dimensions (W×D×H) | 385 mm × 204 mm × 360 mm |
| Timer Range | 0–99.99 s/min/h |
| Comb Width | ≥110 mm, 7–8 smooth round teeth per 25 mm |
| Steel Ruler Accuracy | ±1 mm |
| Specimen Size | 102 mm × 356 mm × actual thickness (≤13 mm) |
| Flame Spread Limit | ≤102 mm/min or char length ≤51 mm within 60 s after timing initiation at 38 mm from ignition edge |
| Origin | Sichuan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JH |
| Pricing | Available Upon Request |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH-UV Aging Test Chamber |
| Price Range | USD 140 – 2,800 |
| Humidity Range | ≥95% RH (in-chamber actual value) |
| UV Lamp Power | 40 W per lamp |
| Irradiance Range | 0.72 W/m² (at 340 nm) |
| Exposure Time Setting | 1–9999 hours (adjustable) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH-OZ-300 |
| Price Range | USD 920 – 9,200 |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | Semiconductor Chip High-Low Temperature & Low-Pressure Environmental Test Chamber |
| Temperature Range | −70 °C to +150 °C |
| Cooling Method | Compressor-based refrigeration |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | 2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Ramp-Up Time (−70 °C to +150 °C) | ≤60 min |
| Pressure Control Range | 1–101.3 kPa (absolute) |
| Pressure Control Accuracy | ±2 kPa |
| Compliance | JEDEC JESD22-A104, JESD22-A105, GB/T 4937-2018, IEC 60068-2-1, IEC 60068-2-2, MIL-STD-810H (Section 501.7 & 505.6) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Manufacturer |
| Country of Origin | China |
| Model | JH-2026 |
| Price Range | USD 700 – 70,000 |
| Chamber Type | Upright |
| Condensation Method | Air-Cooled |
| Temperature Range | 15–45°C |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ±1°C (high-temp), ±2°C (low-temp) |
| Humidity Uniformity | ≤ ±3% RH |
| Humidity Fluctuation | ±3% RH |
| Heating Rate | 1.0–3.0°C/min |
| Interior Dimensions | Custom-Engineered per Application Requirements |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | DV-10T |
| Max Load Capacity | 10 ton (US) |
| Load Cell Options | 5–10,000 kg (auto-ranging, resolution 1:200,000) |
| Force Accuracy | ±1% FS |
| Crosshead Speed Range | 0.00005–1000 mm/min (programmable, closed-loop control) |
| Displacement Resolution | 0.005 mm (1000 P/R encoder) |
| Test Space | 380 mm width × 1000 mm vertical travel |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 88×48×215 cm (main frame) |
| Weight | ~480 kg |
| Compliance | ASTM E4, ASTM E8, ISO 6892-1, GB/T 228.1, EN 10002-1 |
| Software | Trapezium X v12.3 (Windows-based, FDA 21 CFR Part 11–ready audit trail, GLP/GMP-compliant reporting) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | JH— Membrane Dielectric Breakdown Voltage Tester |
| Price Range | USD 140 – 1,400 |
| Brand | JIANHU |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH-150 |
| Price | Upon Request |
| Temperature Control Range | 0–60 °C |
| Humidity Control Range (with humidification) | 60–90 %RH |
| Humidity Fluctuation | ±5–8 %RH |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±0.5 °C |
| Power Supply | 220 V, 50 Hz |
| Input Power | 650 W |
| Inner Chamber Dimensions (W×D×H) | 52×46×105 cm |
| Outer Dimensions (W×D×H) | 62×69×159 cm |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Timer Range | 1–9999 min |
| Communication Interface (optional) | RS485, 4–20 mA analog output |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Model | JH-SDT Series |
| Price Range | USD 1,350 – 13,500 (FOB Shanghai) |
| Sand Composition | 97–99% SiO₂ (quartz sand, angular, graded per IEC 60529 & MIL-STD-810H) |
| Sand Blowing Concentration | 1.1 g/m³ ±0.25 g/m³ to 2.2 g/m³ ±0.5 g/m³ |
| Sand Blowing Velocity | 0–29 m/s (adjustable, laminar-to-turbulent flow control) |
| Dust Concentration | 0.1–10.6 g/m³ ±7% (calibrated gravimetrically) |
| Dust Blowing Velocity | 8.9 m/s ±1.2 m/s (ISO 20623-compliant nozzle array) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model Series | JH-9040A / JH-9070A / JH-9140A / JH-9240A |
| Power Supply | 220 V, 50 Hz |
| Temperature Range | RT+10 °C to 250 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±1.5% |
| Temperature Fluctuation | ±1 °C |
| Input Power | 800 W / 1550 W / 2050 W / 2450 W |
| Chamber Dimensions (W×D×H, mm) | 340×320×340 / 450×400×450 / 550×450×550 / 600×550×600 |
| Capacity | 40 L / 80 L / 136 L / 220 L |
| Standard Shelves | 2 pcs |
| Timer Range | 1–9999 min |
| Optional Features | Independent Over-Temperature Cut-Off Alarm |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-UV Weathering Test Chamber |
| Humidity Range | ≥95% RH |
| UV Lamp Power | 40 W per lamp |
| Irradiance Range | 0.72 W/m² (at 340 nm) |
| Test Duration | 1–9999 hours (adjustable) |
| Operating Temperature Range (Illuminated) | Consult technical support |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Chamber Type | Dual-Zone (Hot/Cold Separate Chambers) |
| Temperature Range (Hot) | +60°C to +200°C |
| Temperature Range (Cold) | −78°C to 0°C |
| Thermal Shock Range | −55°C to +125°C |
| Temperature Stability | ±0.5°C |
| Heating Rate | +60°C → +200°C (typical ramp) |
| Cooling Rate | +20°C → −75°C (typical ramp) |
| Compliance | Designed to meet GB/T 2423.22–2025, ISO 16750-4, ASTM D5229/D5229M, MIL-STD-810H Method 503.6 |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic (China-Made) |
| Model | JH Series Dielectric Withstand Voltage Tester & Battery Dielectric Breakdown Strength Analyzer |
| Price Range | USD 2,800 – 28,000 |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH-Series Rapid-Cooling Ice-Water Thermal Shock Test Chamber |
| Price Range | USD 950 – 95,000 |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Model | JH-Series Sand and Dust Environmental Test Chamber |
| Salt Spray Rate | 1–2 mL / 80 cm²·hr |
| Nozzle Pressure | 0.7–1 kg/cm² |
| Fog Removal Method | Compressed Air Exhaust System |
| Sample Compatibility | Enclosures, Electronics, Automotive Components, Aerospace Housings, Outdoor Sensors, IP5X/IP6X-rated Devices |
| Compliance | Designed to support testing per IEC 60529 (IP5X/IP6X), MIL-STD-810H Method 510.7, ISO 20623, GB/T 2423.37–2008 |
Show next