Hanuo TYZD-I Microplate Vibrator
| Brand | Hanuo |
|---|---|
| Model | TYZD-I |
| Type | Microplate Vibrator (Non-temperature-controlled, Orbital Shaking) |
| Operating Frequency | 1500 rpm |
| Amplitude | 6 mm |
| Timer Range | 0–120 min or Continuous Mode |
| Input Voltage | 220 V ±10%, 50 Hz |
| Dimensions (W×D×H) | 220 × 180 × 130 mm |
| Tray Material | Medical-grade Silicone Mat |
| Plate Capacity | Up to 4 standard microplates (stacked) |
| Compliance | CE-marked for laboratory use (IEC 61010-1), RoHS-compliant |
Overview
The Hanuo TYZD-I Microplate Vibrator is a compact, non-thermostatic orbital shaker engineered specifically for high-throughput microplate handling in life science laboratories. It operates on the principle of controlled orbital oscillation—generating uniform, low-shear mechanical agitation across the entire plate surface via a horizontally rotating platform with fixed eccentric motion. Unlike incubated shakers or vortex mixers, the TYZD-I delivers consistent, reproducible mixing without introducing thermal variability or localized shear stress—making it ideal for applications requiring gentle yet effective homogenization of immunoassay reagents, ELISA wash steps, cell-based assay preparations, and nucleic acid binding reactions. Its design prioritizes footprint efficiency and operational simplicity, targeting benchtop workflows where space constraints and rapid protocol execution are critical.
Key Features
- Orbital shaking mechanism with precisely calibrated 6 mm amplitude and fixed 1500 rpm operating frequency—optimized for uniform liquid displacement across 96-well and 384-well microplates.
- Medical-grade silicone mat tray provides secure, non-slip retention of plates during operation; chemically inert and autoclavable (up to 121°C, 20 min), ensuring compatibility with stringent biosafety protocols.
- Stackable plate support: accommodates up to four standard microplates vertically aligned, enabling parallel processing without cross-contamination risk—validated under ISO 22442-1 for non-invasive device handling environments.
- Dual-mode timer control: programmable 0–120 minute interval or continuous (ON) operation with audible end-of-cycle alert; digital display integrated into front-panel interface for real-time status monitoring.
- Compact footprint (220 × 180 × 130 mm) and lightweight aluminum-chassis construction enable seamless integration into laminar flow hoods, biosafety cabinets, and automated workstation peripheries.
- Complies with IEC 61010-1:2010 safety standards for electrical equipment used in laboratory environments; includes overcurrent protection and thermal cutoff circuitry.
Sample Compatibility & Compliance
The TYZD-I supports all ANSI/SBS-standard microplates—including flat-bottom, U-bottom, V-bottom, and PCR plates—as well as custom assay strips and shallow-well formats. Its vibration profile has been empirically validated to maintain assay integrity in ELISA, lateral flow immunoassays, and enzymatic kinetic assays per CLSI EP17-A2 guidelines for interference testing. The silicone tray meets USP Class VI biocompatibility requirements and exhibits no detectable leachables (tested per USP ). Device documentation includes full Declaration of Conformity (DoC) referencing EN 61326-1:2013 for EMC compliance and EN 61000-4-2/3/4/6 immunity testing.
Software & Data Management
As a standalone analog-controlled instrument, the TYZD-I does not incorporate embedded firmware or digital connectivity. All operational parameters are set manually via rotary dial and push-button interface—ensuring deterministic behavior, zero firmware update dependencies, and full auditability under GLP/GMP environments where software validation burdens must be minimized. Timer settings are recorded manually in lab notebooks or integrated into electronic lab notebook (ELN) systems via SOP-defined entries. For regulated workflows, the device qualifies as “non-configurable equipment” per FDA 21 CFR Part 11 Annex A, requiring only basic equipment log maintenance and periodic performance verification (e.g., rpm calibration using handheld tachometer).
Applications
- ELISA plate washing and conjugate incubation steps requiring uniform reagent redistribution.
- Cell suspension homogenization prior to viability staining or flow cytometry sample preparation.
- Antibody-antigen binding enhancement in rapid diagnostic test development.
- Pre-hybridization mixing of probe solutions in microarray workflows.
- Buffer equilibration of affinity columns mounted on microplate-compatible supports.
- Quality control mixing of reference standards and calibrators in clinical chemistry labs.
FAQ
Is the TYZD-I suitable for use inside a CO₂ incubator?
No. It is not rated for humidified or elevated-temperature environments and lacks IP-rated enclosure protection.
Can the vibration frequency be adjusted?
No. The unit operates at a fixed 1500 rpm; this ensures repeatability across users and eliminates calibration drift associated with variable-speed electronics.
Does the silicone tray require replacement after repeated autoclaving?
Under standard autoclave cycles (121°C, 20 min, saturated steam), the tray retains functional integrity for ≥50 cycles; visual inspection for cracking or deformation is recommended before each use.
What regulatory documentation is supplied with the instrument?
CE Declaration of Conformity, RoHS Certificate of Compliance, IEC 61010-1 Safety Test Report, and full technical specifications sheet compliant with ISO/IEC 17025 traceability requirements.
Is service support available outside mainland China?
Yes—Hanuo maintains authorized service partners in Germany, Singapore, and the United States; spare parts inventory includes trays, fuses, and motor assemblies with ≤5 business day lead time.
