- All
- Favorite
- Popular
- Most rated
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | D25-35 |
| Screw Diameter | 25–35 mm |
| Maximum Web Width | 500 mm |
| Film Thickness Range | 0.1–8 mm |
| Cooling Roll Configuration | Dual or Triple (Vertical, Horizontal, or Tilt-Adjustable) |
| Downstream Equipment | Winder, Slitter, Chill Roll Table, Edge Trimmer |
| Compatible Polymers | Polyolefins, PS, ABS, PET, PC, PMMA |
| Screw Exchange System | Rear-Access Quick-Change Mechanism |
| Compliance | CE-marked, ISO 9001–certified manufacturing |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | E-LAB 22 |
| Price Range | USD 13,500 – 40,500 (FOB Italy) |
| Screw Diameter | 22 mm |
| Die Diameter Options | 30 mm |
| Film Width Capability | 200 mm (with flat film die) |
| Configuration | Co-rotating, intermeshing twin-screw |
| Drive Power | 7.5 kW (typical for E-LAB 22) |
| L/D Ratio | 40:1 (standard) |
| Throughput Range | 1–8 kg/h (depending on formulation and screw design) |
| Temperature Control Zones | 6 independent zones (±1 °C accuracy) |
| Material Contact Parts | Nitrided tool steel (X153CrMoV12) or optional corrosion-resistant alloy |
| Brand | Cometech |
|---|---|
| Model | QC-674A |
| Origin | Taiwan |
| Heating Range | Ambient to 300 °C |
| Platen Size | 300 × 300 mm |
| Platen Gap Adjustment | 60–120 mm |
| Heating/Cooling Rate | 50 → 150 °C in ≤18 min |
| Cooling Method | Circulating Water with Forced Platen Cooling |
| Pressure Control Range | 20–90% of Full Scale (Calibrated Electronic Pressure Display) |
| Display Units | Temperature (°C/°F), Area (m²/cm²/mm²/ft²/in²), Force (Kgf/gf/tonf-long/tonf-short/lbf/ozf/kN/N/ton-SI), Pressure (bar/kgf/cm²/kPa/MPa/mm-H₂O@4 °C/psi) |
| Interface | 7″ Touchscreen HMI with Real-time P-T-t Curve Visualization |
| Safety | Full-Enclosure Interlocked Safety Door + Emergency Stop |
| Power Supply | 3-Phase 220 V, 50/60 Hz, 30 A |
| Dimensions (W×D×H) | 120 × 74 × 152 cm |
| Weight | 680 kg |
| Compliance | Designed for ASTM D5345, ISO 34-1, ISO 6502, and USP <1031> vulcanization protocol execution |
| Brand | EUROTECH |
|---|---|
| Origin | Italy |
| Model | XTR Series (with Vacuum Pump & Air-Cooled Strand Pelletizer) |
| Screw Diameter Options | 20 / 25 / 30 / 35 mm |
| Gearbox Design | Rear-Removable for Rapid Screw Extraction |
| Barrel | Bimetallic Construction |
| Screw | Special Surface-Coated Hardened Steel |
| Venting Configuration | Atmospheric or Vacuum-Connected (XTR-D Variant) |
| Application Focus | Polymer Processing, Recycled Material Compounding, Mineral-Filled Compound Extrusion |
| Brand | MicrOptik |
|---|---|
| Origin | Netherlands |
| Model | MTS120i |
| Temperature Range | −20 °C to +120 °C |
| Temperature Resolution & Accuracy | 0.1 °C |
| Control Method | Manual or USB 2.0–enabled software (MTDC600 controller) |
| Sample Area | 25 mm × 40 mm |
| Observation Port Diameter | 32 mm |
| Standard Chamber Height | 4 mm |
| Objective Working Distance Compatibility | 0.17 mm coverslip thickness |
| Sensor Type | RTD (Pt100) |
| Cooling Method | Solid-state thermoelectric (Peltier), no liquid nitrogen or chiller required |
| Optional Accessory | MC-5L auxiliary cooler for sub-zero stability |
| Brand | MicrOptik |
|---|---|
| Origin | Netherlands |
| Model | MHCS622-V/G |
| Temperature Range | −190 °C to +600 °C |
| Temperature Resolution | 0.1 °C |
| Control Method | PID/PID-Switching |
| Sensor Type | RTD |
| Sample Area | 40 mm × 40 mm |
| Observation Aperture | 32 mm |
| Objective Working Distance | 6 mm (optional reduced WD) |
| Chamber Height | 4 mm standard, up to 20 mm |
| Electrical Feedthroughs | 4 channels (configurable) |
| Controller | MTDC600 Programmable Temperature Controller with USB 2.0 interface and embedded power supply |
| Cooling Option | LN2-SYS liquid nitrogen cryogenic system |
| Mounting | Horizontal or vertical integration compatible |
| Brand | MicrOptik |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | E-Type |
| Price Range | USD 42,000 – 70,000 |
| Maximum Film Width | 1200 mm |
| Production Capacity | 400 kg/h |
| Layer Configuration | 1–7 layers |
| Primary Resins | Polyolefins (PP, PE), Barrier Polymers (EVOH, PA, PVDC) |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | XTR20 / XTR25 |
| Extruder Type | Single-Screw Cast Film Extruder |
| Die Material | Special Alloy Steel |
| Chill Roll Configuration | Single, Dual, or Triple Roll |
| Web Width Range | 100–500 mm |
| Optional Features | Unwind Unit for Extrusion Coating, In-Line Gel Detection System |
| Supply Type | Imported Equipment |
| Distributor Status | Authorized General Distributor |
| Brand | MicrOptik |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MHCS400–XR |
| Temperature Range | –190 °C to +400 °C (optional up to +600 °C) |
| Temperature Resolution | 0.1 °C |
| Control Method | PID/PID-Switching |
| Sensor Type | RTD (Pt100) |
| Sample Area | 40 mm × 40 mm |
| Chamber Height | 5 mm (customizable) |
| Observation Aperture | 32 mm (transmission light path: 1.5–7 mm, configurable) |
| Working Distance | 6 mm (reduced WD options available) |
| Controller | MTDC600 Programmable Temperature Controller |
| Optional Accessories | LN2-SYS Liquid Nitrogen Cooling System, Water-Cooled Mount, Gas Purge Enclosure, Probing XY Micropositioner (±12.5 mm travel, 0.1 µm resolution), Removable Lid, Thermal Shield Housing |
| Brand | EUROTECH |
|---|---|
| Origin | Germany |
| Model | Pelletizing-20D |
| Screw Diameter | 20 mm |
| L/D Ratio | 25:1 |
| Max. Screw Speed | 150 rpm |
| Heating Zones | 4 (independent microprocessor-controlled) |
| Temperature Range | Ambient to 350 °C per zone |
| Strand Cooling | Water bath + forced-air cooling |
| Die Options | 3 mm and 4 mm round orifices |
| Feed Hopper | Equipped with material-level sensor and empty-feed alarm |
| Torque Monitoring | Real-time display with overload shutdown |
| Control Interface | TFT touchscreen panel with dedicated soft-keys for each heating zone |
| Screw Configuration | Three-zone design with dedicated mixing section (mixing length ratio: 4:1) |
| Safety Features | High/low temperature alarm, torque limit lockout, emergency stop |
| Key | Brand: EUROTECH |
|---|---|
| Origin | Italy |
| Model | D20 |
| Screw Diameter | 20 mm |
| Die Diameter | 30 mm |
| Max Film Width | 200 mm |
| Max Output Speed | 15 m/min |
| Max Tension Control | 20 N |
| Melt Temperature Range | up to 450 °C |
| Screw Speed | 0–200 rpm |
| Torque Capacity | 1000 N·m (closed-loop controllable up to 500 N·m) |
| Heating Zones | 4 electrically heated & air-cooled barrel zones |
| Die Gap Options | 1.0 mm and 1.5 mm |
| Control System | Full-color LCD touchscreen with OPC UA & web-based remote interface |
| Compliance | Designed for GLP-compliant R&D environments, supports ASTM D2617, ISO 1183, and ISO 1421 test method integration |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | T-100 |
| Application | Thermoplastic Regranulation & Color Masterbatch Pelletizing |
| Gearbox | High-torque, low-noise helical gear reduction |
| Screw & Barrel | Nitrided and bimetallic-hardened surfaces |
| Exhaust Options | Vacuum venting or atmospheric vent port |
| Material Compatibility | PP, PE, PS, ABS, PA, PVC, PC, POM, EVA, LCP, PET, PMMA |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Extruder Screw Diameter Range | 35–120 mm |
| Maximum Web Width | 1200 mm |
| Thickness Range | 0.1–8 mm |
| Production Capacity | 400 kg/h |
| Roll Stand Max. Winding Diameter | 1000 mm |
| Calender Configuration | Triple-roll (vertical/horizontal/adjustable tilt) |
| Slitting Capability | Up to 8 mm thickness |
| Type | Single-screw extrusion line for monolayer & multilayer polymer films and sheets |
| Compliance | Designed per CE Machinery Directive 2006/42/EC, compliant with ISO 14001 & ISO 9001 manufacturing practices |
| Brand | EUROTECH |
|---|---|
| Origin | Italy |
| Model | Microex Cast |
| Screw Diameter | 17.5 mm |
| Film Width | 100 mm (max) |
| Thickness Range | 10–1000 µm |
| Output Capacity | 1 kg/h (max) |
| Layers | Single-layer |
| Drive Power | 3 kW |
| Control Interface | 7-inch Touchscreen HMI |
| Connectivity | LAN + USB data export |
| Optional | In-line gel detection system |
| Compatible Materials | HDPE, LDPE, LLDPE, PP, PA, PMMA, TPU, EVOH, EVA, Biopolymers |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | KP-150 |
| Platen Size | 150 × 150 mm |
| Type | Desktop Vulcanization Press |
| Application | Rubber & Thermoplastic Sample Curing and Compression Molding |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | XTR20 |
| Screw Diameter | 20 mm |
| Length-to-Diameter Ratio (L/D) | 30:1 |
| Drive Motor | 3 kW |
| Temperature Control Zones | 2 |
| Configuration | Import |
| Distributor Type | Authorized Distributor |
| Price Range | USD 42,000 – 70,000 |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | D-20 |
| Screw Diameter | 20 mm |
| L/D Ratio | 30 |
| Max. Output | 15 kg/h (material-dependent) |
| Screw Speed Range | 0–180 rpm |
| Torque | 500 N·m |
| Motor Power | 3 kW |
| Die Width | 150 mm |
| Adjustable Die Gap | 1.5 mm |
| Chill Roll Surface Roughness | < 0.1 µm |
| Chill Roll Temperature Control Range | 20–180 °C |
| Temperature Stability | ±0.01 °C |
| Winding Speed | 0.1–10 m/min |
| Tension Control Range | up to 20 N |
| Overall Dimensions (Extruder) | 600 × 1200 × 450 mm |
| Weight (Extruder) | 300 kg |
| Dimensions (Chill & Winding Unit) | 720 × 450 × 860 mm |
| Weight (Chill & Winding Unit) | 480 kg |
| Chiller Capacity (at 0 °C) | 5 kW |
| Julabo Thermostat Temperature Range | –30 to +180 °C |
| Brand | EUROTECH |
|---|---|
| Origin | Italy |
| Model | Microex Blown |
| Type | Benchtop Single-Layer Blown Film Extrusion System |
| Screw Diameter | 20 mm |
| Configuration | Integrated Microextruder, Air Ring, Haul-Off, and Winder |
| Application Scope | QC Testing of Recycled Polymers, Color Masterbatches, Additive-Loaded Compounds, and Biopolymers |
| Compliance Context | Designed for R&D-scale process simulation per ISO 1133 (melt flow index correlation), ASTM D2657 (blown film processing guidelines), and internal GLP-compliant lab protocols |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | K2A |
| Price Range | USD 68,000 – 136,000 |
| Brand | MicrOptik |
|---|---|
| Origin | Poland |
| Model | MHS300 |
| Temperature Range | Ambient to 300 °C |
| Temperature Resolution | 0.1 °C |
| Control Method | Dual-Mode PID/PID-Switching |
| Sensor Type | RTD (Pt100) |
| Sample Area | 40 mm × 40 mm (customizable) |
| Mounting | Horizontal & Vertical Configurations Supported |
| Environmental Operation | Ambient Atmosphere |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | D25–D35 |
| Price Range | USD 14,000 – 42,000 (FOB Italy) |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | 3D Printing Filament Extrusion Line |
| Application | Thermoplastic filament production for FDM/FFF 3D printing |
| Compliance | CE-marked, ISO 9001–certified manufacturing process |
| Configuration | Twin-screw co-rotating extruder system with vacuum venting, precision metering feeder, water-cooled haul-off, and inline diameter laser gauge |
| Key | Brand: EUROTECH |
|---|---|
| Origin | Italy |
| Model | XTR60 |
| Type | Continuous Strip-to-Tube Welding & Sizing System |
| Configuration | Import (CE-compliant) |
| Distribution Status | Authorized Distributor |
| Brand | Morphious |
|---|---|
| Origin | Italy |
| Model | Morphious C1 |
| Detection Principle | High-Resolution Color Imaging + Real-Time Image Processing |
| Pixel Resolution | 1600 × 1200 @ 60 fps |
| Pixel Size | 4.5 µm |
| Minimum Detectable Particle Size | 20 µm |
| Throughput Range | 2–60 kg/h (material- and size-dependent) |
| Optical Configuration | Triple-CCD Color Calibration Module |
| Software Platform | Windows 10 or later, Mishell®-powered analysis engine |
| System Dimensions | 500 × 600 × 500 mm (L×W×H) |
| Weight | 32 kg |
| Power Consumption | 18 W |
| Operating Temperature | 15–40 °C |
| Integrated Auto-Cleaning Unit | Yes |
| Connectivity | Gigabit Ethernet, USB 3.0, HDMI |
| Display | 17″ Low-Emission Monitor |
| Data Export | CSV, PDF, PNG, Excel-compatible reports |
| Compliance Ready | ASTM D7269, ISO 1874-2, USP <788>, GLP/GMP audit trail support (software-configurable) |
Show next