Burkle PTFE Drum Pump (MTD5606-1000)
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MTD5606-1000 |
| Pricing | Available Upon Request |
Overview
The Burkle PTFE Drum Pump (Model MTD5606-1000) is a precision-engineered, chemically inert fluid transfer solution designed for safe, contamination-free handling of ultra-high-purity and highly aggressive liquids in analytical, quality control, and R&D laboratory environments. Built to meet stringent requirements for chemical compatibility and operator safety, this pump operates on a positive displacement principle—utilizing a manually actuated or optionally motor-driven diaphragm mechanism—to deliver consistent, pulse-free flow without metal contact. All wetted components—including the immersion tube, valve body, discharge spout, and internal seals—are constructed exclusively from virgin polytetrafluoroethylene (PTFE) and fluorinated ethylene propylene (FEP), ensuring resistance to virtually all organic solvents, strong acids (e.g., concentrated HNO₃, H₂SO₄, HF-free mixtures), caustics, and oxidizers—excluding elemental fluorine and molten alkali metals above 300 °C. Its design complies with ISO 8504-2 for surface preparation safety and aligns with general laboratory best practices for hazardous liquid handling per OSHA 29 CFR 1910.1200 (HCS).
Key Features
- Fully PTFE/FEP-wetted path: Eliminates metallic leaching and minimizes extractables—critical for trace-level analysis (e.g., ICP-MS, GC-MS sample prep)
- Integrated drip-proof dispensing valve with PTFE-sealed lever actuation: Prevents drips and vapor release during stop/start cycles
- Standardized 2-inch (50.8 mm) NPT threaded cap interface: Ensures secure, leak-tight mounting on UN-certified 200 L steel or HDPE drums
- Adjustable immersion depth of 95 cm (37.4 in): Optimized for full utilization of standard drum volume while maintaining headroom for vapor space
- Robust mechanical architecture: No lubricants required; maintenance-free operation under continuous intermittent use
- Compliance-ready documentation package: Includes material certification (ASTM D4894), RoHS/REACH declarations, and EU Declaration of Conformity
Sample Compatibility & Compliance
This pump is validated for transfer of Class I–III flammable liquids (NFPA 30), corrosive aqueous solutions (ASTM D1193 Type I–IV water grades), and high-purity solvents used in semiconductor cleaning (SEMI F57), pharmaceutical excipient handling (USP ), and battery electrolyte formulation. It is not rated for explosive atmospheres (ATEX/IECEx) unless integrated into an intrinsically safe system. The PTFE construction meets USP Class VI biocompatibility requirements and passes FDA 21 CFR 177.1550 for repeated food-contact use. All components are traceably sourced and supplied with lot-specific certificates of conformance.
Software & Data Management
As a purely mechanical, non-electronic fluid transfer device, the MTD5606-1000 requires no firmware, drivers, or software integration. However, its operational consistency supports GLP/GMP-aligned workflows: flow repeatability (< ±2% CV over 50 cycles) enables reliable volume correlation with gravimetric or volumetric verification logs. When deployed alongside automated balance systems (e.g., METTLER TOLEDO XPR series) or lab information management systems (LIMS), manual pump actuations can be documented via electronic lab notebooks (ELN) with audit-trail-capable timestamps—fully compliant with FDA 21 CFR Part 11 when paired with appropriate access controls.
Applications
- Transfer of high-purity acids (HF-free), bases, and solvents into cleanroom-compatible receiving vessels for ICP-OES calibration standards
- Safe decanting of sulfuric acid-based electrolytes in battery R&D labs (Li-ion, Na-ion)
- Dispensing of photoresist developers and strippers in microelectronics process validation
- Handling of peroxide-forming ethers (e.g., THF, dioxane) where metal-catalyzed decomposition must be avoided
- Preparation of certified reference materials (CRMs) under ISO/IEC 17034 accreditation requirements
- On-site QC sampling in upstream oil & gas facilities (API RP 14C compatible mounting)
FAQ
Is this pump suitable for hydrofluoric acid (HF) solutions?
No. While PTFE exhibits excellent resistance to most strong acids, concentrated hydrofluoric acid—even at low concentrations—can permeate and degrade PTFE over time. For HF handling, specialized perfluoroalkoxy (PFA)-lined or Hastelloy®-based systems are recommended.
Can the immersion tube be shortened or customized?
Yes. Burkle offers field-cuttable PTFE tubing with certified torque specifications for end-user modification; however, any alteration voids the original factory calibration certificate and requires revalidation per ISO/IEC 17025.
Does the pump require periodic recalibration?
No. As a passive mechanical device with no sensors or transducers, it does not require calibration—but users should verify volumetric accuracy annually using NIST-traceable graduated cylinders or balances.
What is the maximum operating temperature?
Continuous service up to 260 °C (500 °F); short-term excursions to 280 °C are permissible per ASTM D638 tensile data for virgin PTFE.
Is the MTD5606-1000 compatible with UN-certified composite intermediate bulk containers (IBCs)?
Yes—when used with Burkle’s optional 3-inch camlock adapter kit (Order Code: ADP-IBC-3), provided the IBC outlet conforms to DIN 11851 or ISO 7241-1-B standards.
