Precise TITAN T1 Nitrogen Generator
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TITAN T1 |
| Price Range | USD $13,500 – $40,500 (FOB) |
| Nitrogen Generation Principle | Hollow-Fiber Membrane Separation |
| Output Flow Rate | 0–35 L/min |
| Output Pressure | 100 psi (6.9 bar) |
| Nitrogen Purity | ≥99.9% |
| Dew Point | −40°C |
Overview
The Precise TITAN T1 Nitrogen Generator is an engineered solution for on-demand, high-purity nitrogen supply in analytical laboratories, particularly those supporting LC-MS, GC-MS, ICP-MS, and other instrumentation requiring consistent, oil-free, and particle-free nitrogen gas. It employs hollow-fiber membrane separation technology—where compressed ambient air is passed through a bundle of selectively permeable polymeric fibers—to separate oxygen, water vapor, and CO₂ from nitrogen based on differential permeation rates. This pressure-driven, dry separation process yields nitrogen with ≥99.9% purity at flow rates up to 35 L/min and a dew point of ≤−40°C, meeting stringent requirements for mass spectrometry source gases and inert blanketing applications. Designed for continuous operation under standard laboratory conditions (5–35°C, ≤80% RH), the T1 operates on universal input voltage (110–240 VAC, 50/60 Hz) and draws 1610 W maximum power. Its compact, mobile footprint—with integrated casters and robust mechanical housing—enables flexible placement adjacent to instruments without dedicated utility infrastructure.
Key Features
- Low-maintenance architecture: Minimal moving parts (single-stage air compressor + passive membrane stack) reduce failure points and extend service intervals.
- Acoustic optimization: Acoustically damped enclosure and vibration-isolated components ensure sound pressure level ≤54 dB(A) at 1 meter—compatible with open-plan lab environments.
- Plug-and-play mobility: Integrated heavy-duty swivel casters with locking brakes enable repositioning without tools or facility modification.
- Gas quality assurance: Final-stage filtration includes coalescing and activated carbon stages; particulate retention <0.01 µm; zero oil carryover; phthalate-free materials throughout wetted path per ISO 10993 biocompatibility guidance.
- Pressure stability: Regulated output maintains ≥100 psi (6.9 bar) across full flow range; optional pressure boosters available for applications demanding >110 psi (7.6 bar).
- Altitude resilience: Rated for continuous operation up to 2000 m above sea level, accommodating high-elevation research facilities.
Sample Compatibility & Compliance
The TITAN T1 delivers nitrogen suitable for direct integration with OEM instrument gas inlets—including Thermo Fisher, Waters, Agilent, and Shimadzu mass spectrometers—without intermediate purification. Its output meets ASTM D6167 (compressed gas purity for analytical use), ISO 8573-1 Class 2:2:2 (particulates, moisture, oil), and USP specifications for inert carrier gases. The system complies with IEC 61000-6-3 (EMC emissions), UL 61010-1 (safety), and carries CE marking. All firmware and control logic are designed to support GLP/GMP workflows, with optional audit-trail-enabled software modules compliant with FDA 21 CFR Part 11 requirements.
Software & Data Management
The T1 features an embedded microcontroller with real-time monitoring of inlet pressure, membrane stack temperature, output flow, purity (via thermal conductivity sensor calibration), and runtime hours. Local display provides intuitive status feedback (LED indicators + monochrome LCD). Optional Ethernet or RS-485 connectivity enables integration into LabVantage, STARLIMS, or custom SCADA systems. Data logging supports CSV export for trend analysis; alarm thresholds (e.g., low inlet pressure, high dew point) trigger relay outputs for interlocked shutdown of downstream instruments. Firmware updates are performed via secure USB interface with cryptographic signature verification.
Applications
- LC-MS and GC-MS nitrogen supply for electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI), and collision cell gas.
- Inert atmosphere generation for glove boxes, sample preparation stations, and solvent evaporation systems.
- Carrier and purge gas for elemental analyzers (ICP-OES, ICP-MS) and thermal desorption units.
- Blanketing gas for pharmaceutical stability chambers and chromatography solvent reservoirs.
- On-site nitrogen for calibration gas blending systems requiring stable, traceable base gas streams.
FAQ
What maintenance is required for the TITAN T1?
Routine maintenance is limited to quarterly inspection of inlet filter elements and annual replacement of pre-filter cartridges. The hollow-fiber membrane module has a rated service life of ≥15,000 operating hours under specified inlet air quality (ISO 8573-1 Class 4:4:4); no periodic membrane cleaning or regeneration is necessary.
Can the T1 support multiple instruments simultaneously?
Yes—when configured with a manifold distribution panel and appropriately sized stainless-steel tubing (≥¼″ OD), the T1 can supply up to three mid-flow instruments (e.g., two LC-MS systems + one GC-MS) provided total demand remains within 35 L/min at ≥100 psi.
Is compressed air supply included?
No—the T1 requires a clean, dry, oil-free compressed air feed (minimum 120 psi, ISO 8573-1 Class 2:2:2) from an external source; Precise offers compatible oil-free scroll compressors as bundled options.
Does the system include validation documentation?
Factory acceptance test (FAT) reports, IQ/OQ protocol templates, and raw calibration certificates for all critical sensors are provided with each unit; PQ support is available through Precise-certified field service engineers.
