AirMar
Filter
Showing 1–30 of 100 results
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | 110WX |
| Instrument Type | Portable Weather Station |
| Enclosure Rating | IPX6 |
| Communication Protocols | NMEA 0183 (RS232/RS422) and NMEA 2000 (CAN Bus) |
| Optional Sensor | Integrated Relative Humidity (RH) Module |
| Wind Measurement Principle | Ultrasonic Time-of-Flight |
| Temperature Range | –40 °C to +70 °C (operational) |
| Pressure Accuracy | ±0.5 hPa |
| Wind Speed Range | 0–60 m/s |
| Wind Direction Range | 0–360° |
| Humidity Range (optional) | 0–100% RH, ±3% RH accuracy |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | 110WXS |
| Type | Portable Weather Station |
| Measurement Principle | Ultrasonic Wind Sensing, Capacitive Humidity & Thermistor Temperature Sensing, Piezoresistive Barometric Pressure Sensing |
| Communication Interface | RS-232 or RS-422 |
| Compliance | IP66 Enclosure Rating, NEMA 4X Equivalent |
| Operating Temperature Range | –40 °C to +70 °C |
| Power Supply | 9–36 V DC |
| Dimensions | 24.1 × 15.2 × 12.7 cm (L×W×H) |
| Weight | 1.8 kg |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | 120WX |
| Instrument Type | Portable Weather Station |
| Output Interfaces | RS232 / RS422 (NMEA 0183) / CAN Bus (NMEA 2000) |
| Environmental Rating | IPX6 (IPX4 with optional humidity sensor) |
| Power Supply | 12–24 VDC |
| Wind Measurement Principle | Ultrasonic Time-of-Flight |
| Optional Sensors | Relative Humidity, Heater |
| Compliance | NMEA 0183 v4.10, NMEA 2000 v2.00, ISO 8573-1 (compressed air quality reference for internal electronics cooling), RoHS III compliant |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | 120WXH |
| Instrument Type | Portable Weather Station |
| Enclosure Rating | IPX6 |
| Communication Interface | NMEA 0183 (RS-422 or RS-232) |
| Heating Function | Integrated thermostatically controlled heater |
| Measurement Principle | Ultrasonic time-of-flight for wind speed & direction |
| Output Parameters | True/Relative wind speed & direction, atmospheric pressure, air temperature, wind chill |
| Discontinued Status | Yes (replaced by 220WXH) |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | 150WX |
| Instrument Type | Portable Weather Station |
| Output Interfaces | RS232, RS422 (NMEA 0183), CAN Bus (NMEA 2000) |
| Environmental Rating | IPX6 (IPX4 with humidity sensor installed) |
| Power Supply | 9–40 VDC |
| Integrated Sensors | Ultrasonic wind (speed/direction), 10 Hz GPS, solid-state compass, 3-axis accelerometer, barometric pressure, air temperature, optional replaceable relative humidity sensor |
| Wind Data Output | True wind, apparent wind, gust statistics (raw 10 Hz wind samples) |
| Mounting | 1"-14 UNS or ½" NPT thread |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | 150WXRS |
| Instrument Type | Portable Weather Station |
| Communication Interface | RS232 / RS422 |
| GPS Update Rate | 10 Hz |
| Rain Measurement Principle | Acoustic Impact Detection |
| Wind Measurement Method | Ultrasonic Anemometry |
| Compass Accuracy | <1° (dynamic stabilization) |
| Enclosure Rating | IP66 |
| Operating Temperature Range | –25°C to +70°C |
| Power Supply | 9–36 VDC |
| Dimensions | 248 mm H × 140 mm D |
| Weight | 1.36 kg |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | 150WXS |
| Instrument Type | Portable Weather Station |
| Output Interface | RS232 / RS422 |
| GPS Update Rate | 10 Hz |
| Compass Accuracy | <1° |
| Enclosure Rating | IP66 |
| Operating Temperature Range | -30°C to +70°C |
| Wind Measurement Principle | Ultrasonic Time-of-Flight |
| Temperature & Humidity Shield | Integrated Solar Radiation Shield |
| Data Output Frequency | Up to 4 Hz for meteorological parameters |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | 200WX |
| Instrument Type | Portable Weather Station |
| Enclosure Rating | IPX6 |
| Output Protocols | NMEA 0183 (RS422/RS232) and NMEA 2000® (CAN Bus) |
| Integrated Sensors | Ultrasonic Wind (True & Apparent), 10 Hz GPS, 3-Axis Solid-State Compass, 3-Axis Rate Gyro, Tilt Sensor, Air Temperature, Barometric Pressure |
| Optional Sensor | Relative Humidity (Field-Replaceable) |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | 200WX-IPX7 |
| Instrument Type | Portable Weather Station |
| IP Rating | IPX7 |
| Output Protocols | NMEA 0183 (RS422/RS232) & NMEA 2000® (CAN bus) |
| GPS Update Rate | 10 Hz |
| Compass Accuracy | <1° (dynamic stabilization) |
| Wind Measurement Principle | Ultrasonic anemometry (no moving parts) |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | 220WX |
| Instrument Type | Portable Weather Station |
| Output Interfaces | RS232 / RS422 / CAN Bus |
| Communication Protocols | NMEA 0183 & NMEA 2000 |
| IP Rating | IPX6 |
| Power Supply | 9–40 VDC |
| Integrated Sensors | Ultrasonic Wind (Speed & Direction), Solid-State Compass, 10 Hz GPS, 3-Axis Accelerometer, 3-Axis Gyroscope, Barometric Pressure, Relative Humidity (Field-Replaceable), Air Temperature, Wind Chill |
| Optional | Heater Module |
| Mounting | 1"-14 UNS or ½" NPT |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | 220WXH |
| Instrument Type | Portable Weather Station |
| Enclosure Rating | IPX6 |
| Wind Measurement Principle | Ultrasonic Anemometry |
| GPS Update Rate | 10 Hz |
| Heading Accuracy | <1° (dynamic stabilized) |
| Power | 12–36 VDC |
| Output Protocols | NMEA 0183 (RS422/RS232) |
| Heating System | Integrated thermostatically controlled heater |
| Operating Temperature Range (heated) | –30°C to +55°C |
| Dimensions | 203 × 127 mm (diameter × height) |
| Weight | 1.36 kg |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B117 |
| Power Output | 600 W |
| Operating Frequencies | 50 kHz / 200 kHz |
| Beam Width | 45° @ 50 kHz, 12° @ 200 kHz |
| Mounting Type | Low-Profile Through-Hull |
| Housing Material | Bronze |
| Acoustic Window Material | Polyurethane |
| Hole Diameter | 51 mm |
| Stem Length | 94 mm |
| Cable Length | 10 m |
| Weight | 0.9 kg |
| Maximum Hull Tilt Angle | 8° |
| Temperature Sensor | Optional |
| Tilt Sensor | Integrated |
| Compliance | ABYC H-27 Certified |
| XducerID® Technology | Yes |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | B122 |
| Operating Frequency | 235 kHz |
| Depth Range | 0.5–180 m |
| Temperature Range | −10 to +40 °C |
| Temp Accuracy | ±0.5 °C |
| Max Hull Angle (with fairing) | 28° |
| Housing Material | Bronze |
| Power Supply | 9–16 VDC, <200 mA |
| Weight | 3.9 kg |
| Transducer Window | Urethane |
| Mounting Options | Through-hull (51 mm hole) or Low-profile via Adapter Ring |
| IP Rating | IEC 60945 Compliant |
| NMEA 2000 LEN | 4 |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B164 |
| Operating Frequencies | 50 kHz / 200 kHz |
| Beamwidth | 22° × 20° @ 50 kHz |
| Output Power | 1000 W |
| Mounting Type | Through-Hull (Low-Profile) |
| Housing Material | Bronze |
| Transducer Window | Polyurethane |
| Hole Diameter | 95 mm |
| Shaft Length | 71 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Tilt Options | 0°, 12°, or 20° |
| Maximum Hull Angle | 24° |
| Weight | 1.4 kg |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B17-HP |
| Temperature Accuracy | ±0.3°C |
| Temperature Resolution | 0.01°C |
| Response Time Constant | 5 s |
| Operating Temperature Range | 0–30°C |
| Supply Voltage | 6–28 VDC |
| Max Current Draw | 30 mA |
| Output Protocols | NMEA 0183 / NMEA 2000® |
| Output Sentence | YXMTW (NMEA 0183), PGN 130310 (NMEA 2000®) |
| Mounting Hole Diameter | 51 mm |
| Housing Material Options | Bronze, Stainless Steel, Plastic |
| Profile Height | 5 mm |
| Cable Length (Max) | 100 m |
| Weight | 1.3 kg |
| Brand | AirMar |
|---|---|
| Origin | USA |
| Model | B175H |
| Operating Frequency Range | 130–210 kHz |
| Output Power | 1000 W |
| Beam Width | 15°–9° (depending on tilt angle) |
| Transducer Mounting | Low-profile through-hull |
| Housing Material | Bronze |
| Temperature Sensor | Integrated, fast-response |
| Maximum Depth Detection | 3000 m |
| Transducer Tilt Options | 0°, 12°, 20° |
| Hull Compatibility | Fiberglass or wood |
| Maximum Hull Deadrise | 28° |
| Acoustic Window Material | Polyurethane |
| Cutout Diameter | 98 mm |
| Stub Length | 118 mm |
| Cable Length | 10 m |
| Weight | 2.7 kg |
| Xducer ID® Technology | Yes |
| Brand | AirMar |
|---|---|
| Origin | USA |
| Model | B175HW |
| Operating Frequency Range | 150–250 kHz |
| Beam Width | Fixed 25° |
| Transmit Power | 1000 W |
| Housing Material | Bronze |
| Mounting Type | Low-Profile Through-Hull |
| Transducer Window Material | Polyurethane |
| Hole Diameter | 98 mm |
| Stub Length | 118 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Maximum Hull Deadrise Angle | 28° |
| Compatible Hull Materials | Fiberglass, Wood |
| Weight | 2.7 kg |
| Total Bandwidth | 100 kHz |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B175L |
| Operating Frequency Range | 40–60 kHz |
| Output Power | 1000 W |
| Beamwidth | 32°–21° (depending on tilt) |
| Transducer Housing Material | Bronze |
| Mounting Type | Low-Profile Through-Hull |
| Transducer Port Hole Diameter | 98 mm |
| Shaft Length | 118 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Weight | 2.7 kg |
| Maximum Hull Deadrise Angle | 28° |
| Acoustic Window Material | Polyurethane |
| Compatible Hull Materials | Fiberglass, Wood |
| Target Detection Depth | Up to 3000 m |
| Total Chirp Bandwidth | 35 kHz |
| Tilt Options | 0°, 12°, or 20° (standard variants include 0° and 12°) |
| Compliance | Designed for marine GLP-aligned data acquisition |
| Brand | AirMar |
|---|---|
| Origin | USA |
| Model | B175M |
| Operating Frequency Range | 85–135 kHz |
| Transmit Power | 1000 W |
| Beamwidth | 16°–11° (depending on tilt) |
| Transducer Mounting | Low-profile through-hull |
| Housing Material | Bronze |
| Acoustic Window | Polyurethane |
| Maximum Hull Angle | 24° |
| Cutout Diameter | 98 mm |
| Stub Length | 118 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Weight | 1.4 kg |
| Compatible Hull Materials | Fiberglass, Wood |
| Recommended Vessel Length | Up to 11 m |
| Chirp Bandwidth | 50 kHz |
| Tilt Options | 0°, 12°, 20° |
| Compliance | CE, FCC, RoHS |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B175MW |
| Power Output | 1 kW |
| Operating Frequency Range | 60–100 kHz |
| Beam Width | 57°–73° (Port/Starboard), Avg. 16° (Forward/Aft) |
| Maximum Depth Rating | 400 m |
| Housing Material | Bronze |
| Mounting Type | Through-Hull with Tilted Element™ |
| Tilt Options | 0°, 12°, or 20° fixed |
| Transducer Window Material | Polyurethane |
| Hull Compatibility | Fiberglass or Wood, Max. Hull Thickness: Not Specified, Max. Vessel Length: 11 m |
| Cable Length | 9 m |
| Weight | 2.7 kg |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B258 |
| Power Output | 1000 W |
| Operating Frequencies | 50 kHz / 200 kHz |
| Beam Width | 14° × 23° @ 50 kHz / 3° × 5° @ 200 kHz |
| Housing Material | Bronze |
| Mounting Type | Through-Hull |
| Cutout Diameter | 30 mm |
| Stub Length | 121 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes, ±0.2°C accuracy |
| Maximum Hull Tilt Angle | 26° (with fairing) |
| Lens Material | Epoxy/Polyurethane |
| Weight | 3.6 kg |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B260 |
| Power Output | 1000 W |
| Operating Frequencies | 50 kHz / 200 kHz |
| Beamwidth | 14° × 23° @ 50 kHz / 3° × 5° @ 200 kHz |
| Housing Material | Bronze (optional stainless steel SS260) |
| Mounting Type | Through-hull |
| Port Diameter | 30 mm |
| Shaft Length | 121 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | ±0.2°C accuracy |
| Maximum Hull Tilt Tolerance | 20° |
| Lens Material | Polyurethane |
| Weight | 7.3 kg |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B265LH |
| Frequency Range (Low) | 42–65 kHz, Beamwidth: 25°–16° |
| Frequency Range (High) | 130–210 kHz, Beamwidth: 10°–6° |
| Output Power | 1000 W |
| Installation Type | Through-Hull with Hydrodynamic Fairing |
| Housing Material | Bronze (transducer body), Polyurethane (fairing) |
| Mounting Hole Diameter | 33 mm |
| Shaft Length | 178 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Maximum Hull Deadrise Angle | 20° |
| Compatible Hull Materials | Fiberglass, Wood |
| Weight | 7.3 kg |
| Total Bandwidth | 103 kHz |
| Dual-Beam Chirp Architecture | Yes |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B265LM |
| Frequency Range (Low) | 42–65 kHz, Beamwidth: 25°–16° |
| Frequency Range (Medium) | 85–135 kHz, Beamwidth: 16°–11° |
| Output Power | 1000 W |
| Installation Type | Through-Hull with Hydrodynamic Fairing |
| Housing Material | Bronze (transducer body), Polyurethane (fairing) |
| Mounting Hole Diameter | 33 mm |
| Shaft Length | 178 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Weight | 7.3 kg |
| Maximum Hull Deadrise Angle | 20° |
| Total Bandwidth | 73 kHz |
| Compatible Hull Types | Fiberglass or Wood |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B275LHW |
| Power | 1000 W |
| Frequency Range | Low Band 42–65 kHz, High Wideband 150–250 kHz |
| Beam Width | Low Band 25°–16°, High Wideband 25° (constant) |
| Max Depth | Low Band 914 m, High Wideband 152 m |
| Housing Material | Bronze |
| Mounting Type | Through-hull with high-performance fairing |
| Transducer Window | Polyurethane |
| Hole Diameter | 30 mm |
| Shaft Length | 121 mm |
| Maximum Hull Tilt | 20° (with fairing) |
| Compatible Hull Materials | Fiberglass or wood |
| Minimum Vessel Length | 8 m |
| Weight | 7.3 kg |
| Temperature Sensor | Integrated fast-response water temperature sensor |
| Total Frequency Span | 123 kHz |
| Compliance | CE, FCC, RCM, UKCA |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B285HW |
| Operating Frequency Range | 150–250 kHz |
| Beam Width | 25° (fixed) |
| Transmit Power | 1000 W |
| Maximum Depth Rating | 240 m |
| Transducer Housing Material | Bronze |
| Mounting Type | Through-hull with fairing |
| Hull Cutout Diameter | 51 mm |
| Stub Length | 97 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Transducer Weight | 2.5 kg |
| Maximum Hull Deadrise Angle | 24° |
| Acoustic Window Material | Polyurethane |
| Xducer ID® Technology | Yes |
| Compatible Vessel Length | Up to 9 m |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B285M |
| Operating Frequency Range | 85–135 kHz |
| Beamwidth | 16°–11° (variable with frequency) |
| Transmit Power | 1000 W |
| Installation Type | Through-Hull with Fairing |
| Housing Material | Bronze |
| Acoustic Window | Polyurethane |
| Mounting Hole Diameter | 51 mm |
| Stub Length | 97 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Maximum Hull Deadrise Angle | 24° |
| Weight | 2.5 kg |
| Target Detection Depth | Up to 3000 m (10,000 ft) |
| Recommended Vessel Length | ≤ 9 m |
| Compliance | CE, FCC, RoHS |
| Brand | AirMar |
|---|---|
| Origin | USA |
| Model | B45 |
| Transducer Material | Bronze |
| Mounting Type | Through-Hull |
| Operating Frequencies | 50 kHz / 200 kHz |
| Beamwidth | 45° @ 50 kHz, 12° @ 200 kHz |
| Output Power | 600 W |
| Temperature Sensor Accuracy | ±0.2°C |
| Cable Length | 10 m |
| Housing Diameter (Hole Size) | 22 mm |
| Stem Length | 92 mm |
| Maximum Hull Tilt Angle | 26° |
| Acoustic Window Material | Polyurethane |
| Weight | 2.5 kg |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B60 |
| Frequency Bands | 50 kHz / 200 kHz |
| Beam Width | 45° @ 50 kHz, 12° @ 200 kHz |
| Transmit Power | 600 W |
| Mounting Type | Flush-mount thru-hull |
| Housing Material | Bronze |
| Transducer Window | Polyurethane |
| Hole Diameter | 60 mm |
| Stub Length | 68.5 mm |
| Cable Length | 10 m |
| Integrated Tilt Compensation | Yes |
| Integrated Temperature Sensor | Yes |
| Maximum Hull Tilt Angle | 24° |
| Compatible Hull Size | Up to 8 m (25 ft) |
| Weight | 1.4 kg |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B744V |
| Frequency Bands | 50 kHz / 200 kHz |
| Beamwidth | 45° @ 50 kHz |
| Transmit Power | 600 W |
| Maximum Depth Range | 235–353 m (50 kHz), 118–206 m (200 kHz) |
| Hull Penetration Diameter | 51 mm |
| Fixed Shaft Length | 121 mm |
| Cable Length | 10 m |
| Housing Material | Bronze |
| Transducer Window | Polyurethane |
| Operating Speed Range | 1–45 knots |
| Maximum Hull Tilt Angle | 24° (with fairing) |
| Integrated Temperature Sensor | Yes |
| Integrated Paddlewheel Speed Sensor | Yes |
| Weight | 2.5 kg |
| Compatible Hull Size | Up to 9 m (30 ft) |