Generic
Filter
Showing 841–870 of 5675 results
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | JTM-50 |
| Pricing | Available Upon Request |
| Motor Configuration | Side-Mounted |
| Contact-Wetted Materials | AISI 304 Stainless Steel |
| Production Capacity | 0.1–0.3 t/h |
| Particle Size Reduction Range | 2–20 µm |
| Rotor Speed | 6000 rpm |
| Motor Power | 0.75 kW, 220 V, 50 Hz |
| Unit Weight | 100 kg |
| Dimensions (L×W×H) | 350 × 200 × 400 mm |
| Cooling | Integrated Water-Cooling Jacket |
| Optional Accessory | Stainless Steel Support Frame (AISI 304) |
| Origin | Shenzhen, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | CS-580A |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Form Factor | Portable |
| Optical Geometry | d/8° Integrating Sphere |
| Illuminant Configuration | D/8 (Diffuse Illumination, 8° Viewing Angle) |
| Spectral Range | 400 nm – 700 nm |
| Repeatability | ΔE*ab ≤ 0.08 |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | COLOSUS |
| Price Range | USD 7,000 – 14,000 |
| Origin | USA |
|---|---|
| Supplier Type | Authorized Distributor |
| Import Status | Imported |
| Model | Rotating Wheel System |
| Pricing | Available Upon Request |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | COM3400W |
| Pricing | Available Upon Request |
| Temperature Range | -20 °C to +130 °C |
|---|---|
| Humidity Range | 40–98% RH |
| Temperature Uniformity | ±2 °C (unloaded) |
| Temperature Fluctuation | ±0.5 °C (unloaded) |
| Humidity Fluctuation | ±2% RH |
| Heating Rate | -20 °C to +120 °C ≤ 60 min |
| Cooling Rate | Ambient to -20 °C ≤ 45 min (unloaded) |
| Vibration Force (Sine) | 2.94 kN (300 kgf) |
| Frequency Range | 5–2000 Hz |
| Max Acceleration | 980 m/s² (100 g) |
| Max Velocity | 1.1 m/s |
| Max Displacement | 25 mm p-p |
| Moving Mass | 2.7 kg |
| Payload Capacity | 120 kg |
| Table Diameter | 150 mm |
| Vibration Axis | Vertical (Z-axis) |
| Test Duration Setting | 0–999 h |
| Compliance | GB/T 2423.1, GB/T 2423.3, GB/T 2423.4, IEC 60068-2-1 (Cold), IEC 60068-2-3 (Damp Heat), IEC 60068-2-30 (Cyclic Damp Heat) |
| Key | Temperature Range: −60 °C to +150 °C |
|---|---|
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ≤ ±2 °C |
| Ramp Rate | 0.7–1.0 °C/min |
| Time Setting Range | 0–9999 h |
| Refrigeration System | Two-stage cascade mechanical compression |
| Refrigerant | HFC-R404A / HFC-R23 |
| Cooling Method | Water-cooled |
| Control Interface | Color touchscreen + PLC (OYO or TIME) |
| Construction | A3 steel exterior with powder coating |
| Viewing Window | Multi-layer tempered glass with conductive film |
| Cable Port | Ø50 mm (left side) |
| Humidification | Built-in water tank with booster pump |
| Air Circulation | Forced convection via extended-shaft stainless steel centrifugal blower (bottom inlet / top outlet) |
| Sealing | Dual-layer high-tensile high-temp silicone gasket |
| Vibration Integration | Optional electrodynamic or servo-hydraulic shaker system (user-specified) |
| Key | Temperature Range: -20°C to +130°C |
|---|---|
| Humidity Range | 40–98% RH |
| Temperature Uniformity | ±2°C (unloaded) |
| Temperature Stability | ±0.5°C (unloaded) |
| Humidity Stability | ±2% RH |
| Temperature Deviation | ≤±2°C |
| Humidity Deviation | ≤±2°C |
| Heating Rate | -20°C to +120°C ≤60 min |
| Cooling Rate | Ambient to -20°C ≤45 min (unloaded) |
| Time Setting Range | 0–999 h |
| Vibration Frequency Range | 5–2000 Hz |
| Max Acceleration | 980 m/s² (100 g) |
| Max Velocity | 1.1 m/s |
| Max Displacement | 25 mm p-p |
| Dynamic Load Capacity | 120 kg |
| Moving Mass | 2.7 kg |
| Table Diameter | 150 mm |
| Vibration Axis | Vertical (Z-axis) |
| Excitation Force | 300 kN (300 kgf) |
| Noise Level | Low |
| Power Efficiency | 60% reduction vs. conventional designs |
| Key | Temperature Range: −70 °C to +150 °C |
|---|---|
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ≤ ±2.0 °C |
| Temp. Stability | ≤ ±0.5 °C |
| Humidity Stability | +2/−3% RH |
| Cooling Rate (unloaded) | 0.7–1.0 °C/min |
| Heating Rate (unloaded) | 1.0–3.0 °C/min |
| Vibration Type | Electromagnetic Shaker |
| Frequency Range | 2–500 Hz |
| Displacement Amplitude | 0–5 mm |
| Acceleration Range | 0–20 g |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.3, GB/T 2423.10, GB/T 2423.48, GB/T 2423.49, GB 10586, GB 10589, GB 10592, GB 11158, GB/T 5170.2, GB/T 5170.5 |
| Key Features | Platform Size: 1000 × 1000 mm |
|---|---|
| Chamber Dimensions (W×D×H) | 1100 × 1200 × 650 mm |
| Weight | ~350 kg |
| Power Supply | AC 220 V, Single-Phase, 15 A |
| Drive Mechanism | Motor-Cam Actuation |
| Max. Amplitude | 25.4 mm (1 in) |
| Rotational Speed Range | 120–300 rpm |
| Frequency Range | 2.00–5.00 Hz |
| Test Duration | Up to 80 min per cycle |
| Cycle Count | Up to 14,500 cycles per run |
| Operating Ambient | 23 °C ± 5 °C, RH < 80 % (non-condensing) |
| Sound Pressure Level | <74 dB(A) at 5 Hz |
| 台面材质 translated as Top Plate Material | 19-mm (3/4″) Structural Plywood |
| Display | Dual independent digital displays for simultaneous frequency and rpm readout |
| Control Modes | Timer-based and counter-based operation |
| Vibration Modes | Vertical-only, Horizontal-only, Dual-axis synchronous, Dual-axis alternating |
| Compliance | ISTA 3A, ISTA 3B, ASTM D999, ASTM D4169, ASTM D3580 |
| Key Specifications | Temperature Range: -40°C to +130°C |
|---|---|
| Humidity Range | 40–98% RH |
| Temp. Uniformity | ±2°C (unloaded) |
| Temp. Stability | ±0.5°C (unloaded) |
| Humidity Stability | ±2% RH |
| Heating Rate | ≤60 min (-20°C → +120°C) |
| Cooling Rate | ≤45 min (ambient → -20°C, unloaded) |
| Vibration Force | 2.94 kN (300 kgf) |
| Frequency Range | 5–2000 Hz |
| Max. Acceleration | 980 m/s² (100 g) |
| Max. Velocity | 1.1 m/s |
| Max. Displacement | 25 mm p-p |
| Table Diameter | 150 mm |
| Vibration Axis | Vertical (Z-axis only) |
| Payload Capacity | 120 kg |
| Control Timer | 0–999 h |
| Compliance Standards | ASTM D999, ASTM D3580, ISTA 2A/3A, EN 60068-2-6 & -2-78, ANSI/UL 60950, ISO 16750-3 |
| Temperature Range | -20 °C to 150 °C |
|---|---|
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ≤ ±2 °C |
| Ramp Rate | 0.7–1.0 °C/min |
| Test Duration Setting | 0–9999 hours |
| Sinusoidal Force Capacity | 2.94 kN (300 kgf) |
| Frequency Range | 5–500 Hz |
| Maximum Acceleration | 980 m/s² (100 g) |
| Maximum Velocity | 1.1 m/s |
| Maximum Displacement | 25 mm peak-to-peak |
| Moving Mass | 2.7 kg |
| Maximum Payload | 120 kg |
| Table Surface Dimensions | 150 mm × 150 mm |
| Vibration Axis | Vertical (Z-axis only) |
| Power Supply | AC 380 V ±10%, 50 Hz, 3-phase 5-wire |
| Key | Temperature Range: -70°C to +150°C |
|---|---|
| Humidity Range | 5–98% RH (standard: 20–98% RH) |
| Temperature Resolution & Uniformity | ±0.1°C / ±2.0°C |
| Humidity Resolution & Uniformity | ±0.1% RH / ±3.0% RH |
| Temperature Control Accuracy | ±0.5°C |
| Humidity Control Accuracy | ±2.5% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Construction | Interior & Exterior – SUS304 stainless steel |
| Insulation | High-density polyurethane foam (chlorinated ethyl carbamate-based, high-temp resistant) |
| Refrigeration System | Air-cooled |
| Safety Protections | Fuseless circuit breaker, compressor overload protection, refrigerant HP/LP cut-off, over-temperature/over-humidity safeguards, fuse, fault alarm system, low-water warning |
| Controller | Touchscreen LCD with bilingual (EN/CN) interface, 100 programmable profiles × 1000 segments × 999 cycles, max segment duration: 99h 59m, screen lock function, real-time curve display, RS-232/RS-485 interface for PC-based programming and remote monitoring |
| Structural Features | A3 carbon steel outer shell with powder coating, SUS304 mirror-finish inner chamber, double-layer high-tensile silicone gasket seal, anti-rebound door handle, multi-layer laminated tempered glass viewport with conductive ITO film, Ø50 mm cable port (left side), removable vibration table mounted on precision linear rails, low-noise Sanyo Denki blower with multi-wing centrifugal impeller, epoxy-silicone hybrid sealing between shaker table and chamber base |
| Key | Temperature Range Options: -20°C to 150°C |
|---|---|
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ≤ ±0.5°C |
| Temperature Stability | ≤ ±2°C |
| Humidity Deviation | +2 / –3% RH |
| Heating Rate (–20°C → 100°C) | ~35 min |
| Cooling Rate (25°C → –40°C) | ~50 min |
| Vibration System | Electrodynamic Shaker (OK-ES), Sinusoidal/Random/Shock Control, Vertical Magnesium Alloy Table (VT0404), Accelerometer (BW), DA-6 Power Amplifier, Excitation Supply, RS232 & USB Data Interface |
| Optional Add-ons | LN2V Liquid Nitrogen Rapid Cooling Unit, LHC Low-Humidity Sensor with Regenerative Desiccant Dryer |
| Compliance | Designed for IEC 60068-2, MIL-STD-810, ASTM D4332, ISO 16750-4, and GLP/GMP-aligned test documentation workflows |
| Key | Temperature Range: -20°C to +130°C |
|---|---|
| Temperature Uniformity | ±2°C (unloaded) |
| Temperature Fluctuation | ±0.5°C (unloaded) |
| Humidity Range | 40–98% RH |
| Humidity Fluctuation | ±2% RH |
| Temperature Deviation | ≤±2°C |
| Humidity Deviation | ≤±2% RH |
| Heating Rate | -20°C to +120°C ≤ 60 min (unloaded) |
| Cooling Rate | Ambient to -20°C ≤ 45 min (unloaded) |
| Vibration Force (Sine) | 2.94 kN (300 kgf) |
| Frequency Range | 5–2000 Hz |
| Max Acceleration | 980 m/s² (100 g) |
| Max Velocity | 1.1 m/s |
| Max Displacement | 25 mm p-p |
| Moving Mass | 2.7 kg |
| Payload Capacity | 120 kg |
| Table Diameter | 150 mm |
| Vibration Axis | Vertical (Z-axis) |
| Timer Range | 0–999 h |
| Compliance | GB/T 2423.1, GB/T 2423.3, GB/T 2423.4, IEC 60068-2-1, IEC 60068-2-3, IEC 60068-2-30 |
| Key | Vibration Table Dimensions (L×W): 30×30 / 50×50 / 75×75 / 100×100 cm |
|---|---|
| Cabinet Dimensions (L×H×W) | Vertical Mode: 30×15×30 to 100×20×100 cm |
| Horizontal Mode | 30×25×30 to 100×25×100 cm |
| Temperature Range | −100 °C to +180 °C |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Stability | ≤ ±0.5 °C |
| Control Accuracy | ±1.0 °C |
| Ramp Rate | ≥60 °C/min |
| Vibration Axes | Triaxial, 6-DOF |
| Frequency Range | 10–5,000 Hz (pseudo-random acceleration profile) |
| Acceleration Range | 1–50 g |
| Max Vibration Table Surface | 1220 mm × 1220 mm |
| LN₂ Consumption | 50 L/min |
| Operating Ambient | +5 °C to +35 °C |
| Key | Temperature Range: -60°C to +150°C |
|---|---|
| Temperature Uniformity | ≤ ±2°C |
| Temperature Stability | ±0.5°C |
| Temp. Deviation | ≤ ±2°C |
| Ramp Rate | 0.7–1.0°C/min |
| Time Setting Range | 0–9999 h |
| Vibration Force (Sine) | 2.94 kN (300 kgf) |
| Frequency Range | 5–500 Hz |
| Max Acceleration | 980 m/s² (100 g) |
| Max Velocity | 1.1 m/s |
| Max Displacement | 25 mm p-p |
| Moving Mass | 2.7 kg |
| Payload Capacity | 120 kg |
| Table Surface | 150 mm × 150 mm |
| Vibration Axis | Vertical (Z-axis only) |
| Power Supply | AC 380 V ±10%, 50 Hz, 3-phase 5-wire |
| Refrigeration | Twin-stage mechanical cascade system with R404A/R23 refrigerants |
| Compressor | Semi-hermetic Copeland (Germany) |
| Cooling Method | Water-cooled |
| Humidity Control | Built-in stainless steel water tank with booster pump |
| Air Circulation | Wide-band forced convection via extended-shaft centrifugal blower, bottom-in/top-out airflow |
| Control System | PLC-based programmable controller with bilingual (EN/CN) color touchscreen (OYO or TIME) |
| Compliance | GB/T 5170.2, GB/T 2423.1–3, GJB 150.3–4 |
| Key Features | 350×350 mm customizable vibration table surface |
|---|---|
| Load capacity options | 25 / 50 / 75 / 100 kg |
| Vibration axis | vertical, horizontal, or simultaneous dual-axis |
| Frequency range | 1–600 Hz / 1–3000 Hz / 1–5000 Hz (model-dependent) |
| Displacement amplitude | 0–5 mm peak-to-peak |
| Maximum acceleration | <20 g |
| Programmable test duration | 0–9999 h/min/sec |
| Frequency resolution | 0.01 Hz, accuracy ±0.1 Hz |
| Power supply | AC220V/50Hz or AC380V/50Hz |
| Key | Function Modes: Programmable, Sweep, Time-Controlled |
|---|---|
| External Dimensions (approx.) | 500 × 200 × 500 mm (H × W × D) |
| Vibration Axis | Vertical (Horizontal optional) |
| Max. Load Capacity | 60 kg |
| Frequency Range | 1–400 Hz (Programmable in 0.01 Hz increments) |
| Acceleration | Up to 20 g (peak) |
| Displacement Amplitude | 0–5 mm p-p (adjustable) |
| Vibration Waveform | Sinusoidal |
| Drive Power | 2.2 kW |
| Frequency Resolution & Accuracy | 0.01 Hz display / ±0.1 Hz accuracy |
| Time Control Unit | Second-level programmability |
| Input Voltage | 220 V ±20% |
| Max. Current Draw | 5 A |
| Platform Options | 250×250 mm to 800×800 mm |
| Max. Shock Acceleration (optional high-shock mode) | Up to 650 g |
| Max. Shock Velocity Change | 7.4 m/s (HS mode) |
| Max. Shock Pulse Duration | 1–3 ms (selectable) |
| Compressed Air Requirement | 6–8 kgf/cm² |
| Compliance | Designed for ISO 16750-3, IEC 60068-2-64, MIL-STD-810H, GB/T 2423.10, GB/T 2423.34 |
| Key | Temperature Range: -20°C to +150°C / -40°C to +150°C / -60°C to +150°C |
|---|---|
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Deviation | ≤ ±2°C |
| Ramp Rate | 0.7–1.0°C/min |
| Time Setting Range | 0–9999 h |
| Sinusoidal Force Capacity | 2.94 kN (300 kgf) |
| Frequency Range | 5–500 Hz |
| Max Acceleration | 980 m/s² (100 g) |
| Max Velocity | 1.1 m/s |
| Max Displacement | 25 mm p-p |
| Moving Mass | 2.7 kg |
| Payload Capacity | 120 kg |
| Table Surface | 150 mm × 150 mm |
| Vibration Axis | Vertical (Z-axis only) |
| Power Supply | AC 380 V ±10%, 50 Hz, 3-phase 5-wire |
| Refrigeration | Dual-stage cascade system with French Tecumseh hermetic compressors |
| Humidity Control | Steam generator + precision PID humidity controller |
| Construction | A3 steel exterior with powder coating |
| Sealing | Dual-layer high-tension silicone gasket |
| Compliance | Designed per IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-30, ISO 16750-4, MIL-STD-810H (vibration & environmental profiles) |
| Key | Vibration Frequency Range: 100–300 rpm (continuous adjustment, ASTM-compliant) |
|---|---|
| Vibration Amplitude | 25.4 mm (1 inch) |
| Max Payload Capacity | 60 kg (standard), up to 100 kg (customizable) |
| Operating Time Range | 0–9999 h / min / sec |
| Motor Power | 1 HP (746 W) |
| Max Current Draw | 4 A |
| Worktable Dimensions | 1000 × 1200 mm (standard, customizable) |
| Base Frame | Structural steel channel (100 × 50 mm), 6 mm powder-coated steel top plate |
| Test Platform | 10 mm anodized aluminum plate |
| Main Mast | Solid 45# steel, surface-hardened, 1900 mm total length, Ø95 mm |
| Primary Drive Rod | Solid 60# steel leadscrew with hardened nut assembly, 1700 mm effective stroke, Ø30 mm |
| Fixture Rod | Solid 45# steel, surface-hardened, 1000 mm length, Ø15 mm |
| Standard Fixture | Six-point adjustable corner clamping system with hardened steel angle brackets |
| Compliance | Designed per ASTM D999, ASTM D3580, ISO 2247, ISO 8767, and EN 1185 for transport simulation testing |
| Key | Vibration Frequency Range: 100–300 rpm |
|---|---|
| Amplitude | 25.4 mm (1 in) |
| Max Load Capacity | 100 kg (customizable) |
| Operating Time | Up to 9999 h/min/sec |
| Motor Power | 1 HP |
| Rated Current | 4 A |
| Worktable Dimensions | 100 cm × 120 cm (customizable) |
| Compliance | ASTM D999, ISTA 3A/3E, EN 15308, ANSI MH1, UL 60730 |
| Humidity Control | Integrated vapor compression + steam injection system |
| Temperature Range | −70°C to +180°C (typical configuration) |
| Humidity Range | 10–98% RH (non-condensing) |
| Key | Table Size: 350 × 350 mm (customizable) |
|---|---|
| Max Load Capacity | 25 / 50 / 75 / 100 kg |
| Vibration Axis | Vertical, Horizontal, or Dual-Axis (selectable) |
| Frequency Range | 1–600 Hz / 1–3000 Hz / 1–5000 Hz |
| Peak-to-Peak Displacement | 0–5 mm (5 mm p-p) |
| Max Acceleration | <20 g |
| Frequency Resolution | 0.01 Hz, Accuracy: ±0.1 Hz |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Compliance | GB/T 2423.10 |
| Operating Ambient | 15–35 °C, ≤85% RH, Non-corrosive, Low-EMI Environment |
| Key | Temperature Range: -20 °C to 150 °C |
|---|---|
| Optional Ranges | -40 °C to 150 °C |
| Temp. Uniformity | ≤ ±2 °C |
| Temp. Fluctuation | ±0.5 °C |
| Temp. Deviation | ≤ ±2 °C |
| Ramp Rate | 0.7–1.0 °C/min |
| Time Setting Range | 0–9999 h |
| Vibration Force (Sine) | 2.94 kN (300 kgf) |
| Frequency Range | 5–500 Hz |
| Max. Acceleration | 980 m/s² (100 g) |
| Max. Velocity | 1.1 m/s |
| Max. Displacement | 25 mm p-p |
| Moving Mass | 2.7 kg |
| Payload Capacity | 120 kg |
| Tabletop Size | 150 mm × 150 mm |
| Vibration Axis | Vertical (Z-axis) |
| Power Supply | AC 380 V ±10%, 50 Hz, 3-phase 5-wire |
| Refrigeration | Dual-stage cascade system with Copeland/Tecumseh-compatible compressors, Danfoss filter-driers, and Castel solenoid valves |
| Internal Dimensions (L×W×H) | 500×600×750 mm (OK-ZTH-225) |
| Key | Construction Material: SUS#304 stainless steel interior & exterior |
|---|---|
| Insulation | High-density polyurethane foam (chlorinated ethyl carbamate-based, high-temp resistant) |
| Cooling System | Air-cooled |
| Temperature Range | −70 °C to +150 °C (selectable low-temp tiers: −70/−60/−40/−20/0/25 °C |
| high-temp options | 100 °C or 150 °C) |
| Humidity Range | 5–98% RH (standard: 20–98% RH |
| Temp/Humidity Resolution | 0.1 °C / 0.1% RH |
| Temp Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0% RH |
| Control Accuracy | ±0.5 °C / ±2.5% RH |
| Heating Rate | ~4.0 °C/min |
| Cooling Rate | ~1.0 °C/min |
| Controller | OYO 8226 touchscreen HMI (Japanese-made), bilingual UI (EN/CN), 100 programs × 1000 segments × 999 cycles, max segment duration: 99 h 59 min |
| Communication | RS-232 / RS-485 interface for PC-based test scheduling, real-time monitoring, and remote start/stop |
| Safety Protections | Fuseless circuit breaker, compressor overload protection, refrigerant HP/LP cut-off, over-temp/over-humidity interlock, water shortage alarm, fault diagnostic display |
| Structural Features | A3 carbon steel outer shell (powder-coated), SUS#304 mirror-finish inner chamber, multi-layer tempered observation window with conductive ITO film, Φ50 mm cable port (left side), double-lip high-tensile silicone door seal, counterforce-free door handle, retractable vibration table rail system, low-noise centrifugal blower (single-cycle airflow), epoxy-silicone hybrid sealing between shaker table and chamber base |
| Compliance | Designed per IEC 60068-2 series, MIL-STD-810H environmental test methodology frameworks, supports GLP/GMP audit-ready data logging when integrated with compliant software |
| Key | Temperature Range: −20 °C to +150 °C / −40 °C to +150 °C / −60 °C to +150 °C |
|---|---|
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ≤ ±2 °C |
| Ramp Rate | 0.7–1.0 °C/min |
| Time Setting Range | 0–9999 h |
| Sinusoidal Force Capacity | 2.94 kN (300 kgf) |
| Frequency Range | 5–500 Hz |
| Max Acceleration | 980 m/s² (100 g) |
| Max Velocity | 1.1 m/s |
| Max Displacement | 25 mm p-p |
| Moving Mass | 2.7 kg |
| Payload Capacity | 120 kg |
| Tabletop Dimensions | 150 mm × 150 mm |
| Vibration Axis | Vertical (Z-axis only) |
| Power Supply | AC 380 V ±10%, 50 Hz, 3-phase 5-wire |
| Cooling Method | Water-cooled |
| Refrigerant | R404A/R23 (HFC-based, non-ozone-depleting) |
| Control System | PLC-based programmable controller with bilingual (English/Chinese) color touchscreen interface (OYO or TIME brand) |
| Tabletop Dimensions | 500 × 500 mm |
|---|---|
| Vibration Axis | Vertical |
| Maximum Payload | 100 kg |
| Frequency Range | 1–600 Hz |
| Sweep Frequency Range | 1–600 Hz |
| Displacement Amplitude | 0–5 mm (peak-to-peak) |
| Maximum Acceleration | 20 g |
| Time Control Resolution | 1 second (up to 1 year duration) |
| Waveforms | Sine, Half-Sine |
| Drive Power | 2.2 kVA |
| Input Voltage | 220 V ±10% AC |
| Maximum Current | 5 A |
| Frequency Resolution | 0.01 Hz (displayed to 0.1 Hz) |
| Shaker Body Dimensions (H×W×D) | 500 × 500 × 160 mm |
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Key | Table Size: 350 × 350 mm (customizable) |
|---|---|
| Max Load Capacity | 25 / 50 / 75 / 100 kg |
| Vibration Axis | Vertical, Horizontal, or Dual-Axis (selectable) |
| Frequency Range | 1–600 Hz / 1–3000 Hz / 1–5000 Hz |
| Displacement Peak-to-Peak | 0–5 mm (5 mm max) |
| Max Acceleration | <20 g |
| Vibration Duration | 0–9999 h/min/sec (programmable) |
| Waveform | Sinusoidal |
| Frequency Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Compliance | GB/T 2423.10 |
| Key | Temperature Range: -40°C to +100°C |
|---|---|
| Humidity Range | 30–98% RH |
| Temp. Uniformity | ≤2°C (-40–100°C) |
| Temp. Stability | ±0.5°C |
| Humidity Control Accuracy | ±3% RH |
| Heating/Cooling Rate | ≥1°C/min |
| Internal Chamber Dimensions | 1000 × 900 × 1100 mm (D×W×H) |
| Observation Window | 270 × 320 mm |
| Power Supply | 380 V AC ±10%, 50 Hz, 3-phase 5-wire |
| Total Installed Power | ≥20 kW |
| Refrigeration | Mechanical, Air- or Water-Cooled |
| Compliance | GB/T 2423.1, GB/T 2423.3, GB/T 2423.4, IEC 60068-2-1 (Cold), IEC 60068-2-3 (Dry Heat), IEC 60068-2-30 (Damp Heat Cycle) |