Generic
Filter
Showing 931–960 of 5678 results
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | CSBox-Tube |
| Pricing | Upon Request |
| Key | Origin: France |
|---|---|
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Measurement Range | C: 0–100%, S: 0–100% |
| Accuracy | ±1% relative (typical samples) |
| Sample Mass | 10–200 mg |
| Analysis Time | 40–300 s |
| Combustion Temperature | 800–1550 °C |
| Carrier Gas | O₂ or ambient air (for inorganic matrices) |
| Power Supply | 230 V, 0.75–2 A |
| (Imported from | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CSBox-Tube-S |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Measurement Range | 0.005–100% S |
| Accuracy | ±1% relative |
| Sample Weight | 10–200 mg |
| Analysis Time | 40–300 s |
| Combustion Temperature | 800–1550 °C |
| Gas Supply | O₂ or ambient air (for inorganic samples) |
| Dimensions (H×W×D) | 500 × 360 × 500 mm |
| Power Supply | 230 V, 0.75–2 A |
| Compliance | ASTM D4294, ISO 4319, ISO 10723, EN 15407, USP <281>) |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Model | CSBox-Tube-S |
| Measurement Range | 0.005–100 wt% S |
| Accuracy | ±1% relative (typical samples) |
| Sample Mass | 10–200 mg |
| Analysis Time | 40–300 s |
| Combustion Temperature | 800–1500 °C (configurable by mode) |
| Interface Protocol Support | Sartorius, Mettler, Precia, Ohaus (RS-232/USB), manual entry |
| Data Output | LPT, COM, USB, LAN (RJ45) |
| Operating System | FreeDOS on Advantech industrial motherboard |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | CSC |
| Price Range | USD 140–1,400 (FOB) |
| Instrument Type | Efflux Viscometer |
| Viscosity Range | 0.1–1000 Pa·s (equivalent shear-thinning semi-solids, calibrated via standardized efflux time) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | Domestic (PRC) |
| Model | XD20 |
| Instrument Type | Inverted Fluorescence Microscope |
| Optical System | CSIS Infinity-Corrected Achromatic Optics |
| Illumination | 6V30W Halogen Lamp (Pre-centered) |
| Objective Working Distance | Long Working Distance (LWD) |
| Phase Contrast Capability | Yes |
| Fluorescence Excitation | Standard Filter Cube Set (e.g., DAPI/FITC/TRITC) |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | CSL-II |
| Pricing | Upon Request |
| Maximum Operating Temperature | 1700 °C (short-term up to 1750 °C) |
| Temperature Uniformity in Soak Zone | ±1 °C |
| Ramp Rate | 0–10 °C/min (programmable) |
| Hold Temperature Accuracy | ±2 °C |
| Control System | 50-Step Intelligent PID Programmable Controller |
| Power Rating | 6–36 kW |
| Interface | RS485/RS232 or Ethernet for PC Integration |
| Compliance | Designed per GB/T 5988–2007 “Test Method for Reheating Linear Change of Dense Shaped Refractory Products” |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | COMBI-xt PAL |
| Age | 3–4 years |
| Warranty | 6 months |
| Included Modules | Liquid Sampling, Headspace (HS), SPME, ITEX-2, SPDE, Thermal Desorption, FlowCell, Dilutor |
| Compatibility | Universal GC & GC-MS platforms (Agilent, Thermo, Shimadzu, PerkinElmer, etc.) |
| Positioning Accuracy | ±0.1 mm (XYZ linear motion) |
| Structural Design | Overhead gantry architecture |
| Regulatory Readiness | Compliant with GLP/GMP workflows |
| Origin | Canada |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | HTC-PAL |
| Condition | Refurbished (7+ Years Operational History) |
| Warranty | 6 Months |
| Product Category | LC-MS Front-End Automation System |
| Bench Footprint | ≤50 cm |
| Microplate Capacity | Up to 24 Plates |
| Sample Temperature Control | Yes |
| Compatibility | Universal Interface for Major LC-MS Platforms (Agilent, Thermo Fisher, Waters, Shimadzu) |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | HTC-Pal |
| Price | USD 6,000 |
| Product Category | Other Analytical Automation Equipment |
| Operational Age | 3–4 Years |
| Warranty | 6 Months |
| Instrument Model | HTC-Pal |
| Service Life | 3 Years |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | HTS-Pal |
| Age | 3–4 Years |
| Warranty | 6 Months |
| Control Mechanism | XYZ Stepper-Motor-Driven Positioning (0.10 mm/step) |
| Compliance | IQ/OQ Documentation Available |
| Configuration | LC & LC-MS Compatible |
| Refurbishment Standard | SpectraLab Scientific Certified |
| Origin | Canada |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | HTS |
| Age | 5–7 Years |
| Warranty | 6 Months |
| Condition | Refurbished & Fully Tested |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | CTL-12 |
| Pricing | Available Upon Request |
| Detection Limit | 5 mg/L COD |
| Measurement Range | 20–1200 mg/L COD |
| Repeatability | ≤0.87% |
| Optical Stability | 0.001 A/5 min |
| Sample Throughput | Up to 12 samples per batch |
| Digestion Time | 10 min at 165 °C |
| Measurement Wavelength | 610 nm |
| Chloride Interference Tolerance | ≤900 mg/L Cl⁻ (open-tube mode) |
| Data Storage | 9 pre-programmed calibration curves |
| Display | 5-digit LED (time, date, absorbance, concentration, slope) |
| Power Supply | 220 V, 50 Hz, 200–700 W |
| [Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | CTS-8005Aplus |
| Pricing | Available Upon Request |
| Operating Frequency | 0.5–15 MHz (dual-band wide/narrow mode) |
| Gain Range | 110 dB with step options of 0.1 / 1.0 / 2.0 / 6.0 dB |
| Detection Range | 0–5000 mm (steel longitudinal wave) |
| Pulse Shift | −20 to 3000 µs |
| Sound Velocity | 1000–9999 m/s |
| Pulse Repetition Frequency | 25–800 Hz (adjustable) |
| Vertical Linearity | ≤4% |
| Horizontal Linearity | ≤0.5% |
| Resolution | ≥28 dB |
| Sensitivity Margin | ≥60 dB (200 mm–φ2 mm flat-bottom hole) |
| Dynamic Range | ≥32 dB |
| Electrical Noise Level | ≤10% |
| Suppression | 0–80% (linear) |
| Detection Modes | Full-wave, Positive half-wave, Negative half-wave |
| Alarm Output | Audio + visual |
| Interface | High-speed USB 2.0, 25-pin parallel printer port |
| Display | 6.5″ TFT color LCD, 640×480 resolution, ambient-light-adaptive color scheme |
| Power Supply | AC 220 V charger + rechargeable lithium-ion battery (no memory effect, >6 h continuous operation) |
| Operating Temperature | −30°C to +50°C |
| Dimensions (L×W×H) | 250 × 186 × 59 mm |
| Weight | ~2.0 kg] |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (China) |
| Model | CTST-I |
| Pricing | Available Upon Request |
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | APBD-I |
| Instrument Type | Palm-Sized Centrifuge |
| Speed Range | Up to 7200 rpm |
| Max RCF | 6000 × g |
| Capacity | 8 × 1.5–2.0 mL tubes |
| Dimensions | 183 × 151 × 153 mm |
| Rotor Type | Universal Fixed-Angle Rotor (Patented) |
| Lid Mechanism | Spring-Loaded One-Hand Opening |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HT200 |
| Pricing | Upon Request |
| Key | Table Surface Dimensions: 500 × 500 mm |
|---|---|
| Vibration Axes | Dual-axis (horizontal + vertical) |
| Max Payload | 100 kg |
| Frequency Range | 1–600 Hz |
| Sweep Frequency Range | 1–600 Hz |
| Displacement Amplitude | 0–5 mm peak-to-peak |
| Max Acceleration | 20 g (rms) |
| Time Control Resolution | 1 second (programmable up to 1 year) |
| Waveforms | Sine, Half-sine |
| Drive Power | 2.2 kVA |
| Input Voltage | 220 V ±10% AC, 50/60 Hz |
| Max Current Draw | 5 A |
| Frequency Display Resolution | 0.01 Hz |
| Shaker Body Dimensions (vertical unit) | 500 × 500 × 160 mm |
| Key | Temperature Range: -70°C to +150°C |
|---|---|
| Humidity Range (optional) | 20–98% RH |
| Rapid TC Range | -45°C to +85°C |
| Rapid TC Accuracy | ±3.0°C |
| Ramp Rates | 5–30°C/min (selectable A–F types) |
| Temp. Control Accuracy | ±0.5°C |
| Humidity Control Accuracy | ±2.5% RH |
| Temp. Uniformity | ±2.0°C |
| Humidity Uniformity | ±3.0% RH |
| Temp. Resolution | 0.1°C |
| Humidity Resolution | 0.1% RH |
| Construction | SUS304 inner chamber, stainless steel or SECC cold-rolled steel with powder coating outer shell |
| Insulation | High-density polyurethane foam |
| Cooling | Water-cooled |
| Compressor Options | Tecumseh (France), Bitzer (Germany) |
| Power Supply | AC380V, 3-phase 5-wire, 50/60 Hz |
| Weight Range | 950–2300 kg |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.5, GJB 360.7, IEC 60068-2-14 (Test N), QC/T 17, EIA-364-32 |
| Safety Protections | High/low pressure cut-off, over-temperature/over-humidity protection, compressor overload protection, fuse, water shortage alarm, fault warning system |
| Origin | United Kingdom |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Costom |
| Price Range | USD 270,000 – 405,000 (FOB UK) |
| Key | Temperature Range: -70°C to +150°C |
|---|---|
| Humidity Range | 30–98% RH |
| Temp. Uniformity | ≤ ±2.0°C |
| Temp. Stability | ≤ ±0.5°C |
| Humidity Stability | +2 to –3% RH |
| Cooling Rate (no load) | 0.7–1.0°C/min |
| Heating Rate (no load) | 1.0–3.0°C/min |
| Vibration Type | Electromagnetic Shaker |
| Frequency Range | 2–500 Hz |
| Displacement Amplitude | 0–5 mm |
| Acceleration Capacity | 0–20 gₚₖ |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.3, GB/T 2423.10, GB/T 2423.48, GB/T 2423.49, GB 10586, GB 10589, GB 10592, GB 11158, GB/T 5170.2, GB/T 5170.5 |
| Key Features | Microprocessor-based color touchscreen controller with EN/CN language switch |
|---|---|
| Temperature range options | 0 to 150°C, −20 to 150°C, −40 to 150°C, or −70 to 150°C |
| Humidity range | 20–98% RH (optional: 5–98% RH) |
| Temp. uniformity | ±0.5°C |
| Humidity uniformity | ±2.5% RH |
| Temp. fluctuation | ±2°C |
| Humidity fluctuation | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Heating rate | ~4.0°C/min |
| Cooling rate | ~1.0°C/min |
| Standard accessories | Two-tier SUS#304 shelves, four casters + four leveling feet, 2.5 m AC380 V±5%, 50 Hz±0.5 Hz, 3-phase 5-wire power cable |
| Temperature Range | -40 °C to +100 °C |
|---|---|
| Humidity Range | 20–98 %RH (optional down to 5 %RH) |
| Temperature Uniformity | ≤ ±0.5 °C |
| Temperature Deviation | ≤ ±2 °C |
| Humidity Deviation | +2 to –3 %RH |
| Ramp Rate | 0.5–1.2 °C/min |
| Control System | Microprocessor-based PID + SSR + Timer |
| Compliance | IEC 60068-2, ISO 16750-4, ASTM D4332, GB/T 2423.1/2/3/4 |
| Refrigerant | R404A/R507 (ODP = 0, compliant with EU F-Gas Regulation) |
| Key | Controller: Siemens PLC + color LCD touch panel |
|---|---|
| Temp. setpoint accuracy | ±0.1 °C |
| Temp. indication accuracy | ±0.1 °C |
| Sensor | PT100 Ω platinum RTD |
| Heating | independent Ni-Cr alloy resistive heaters |
| Refrigeration | French Tecumseh hermetic air-cooled single-stage or cascade compressor system |
| Air circulation | low-noise HVAC-grade motor with multi-blade centrifugal impeller |
| Internal dimensions | 600 × 500 × 500 mm (W×H×D) |
| External dimensions | 1500 × 2100 × 2250 mm (W×H×D) |
| Construction | SUS304 stainless steel interior & exterior |
| Insulation | high-density glass wool + rigid polyurethane foam |
| Door | single pneumatic-assisted access door |
| Accessories | cryo/heat-resistant silicone packing (−200 °C to +400 °C), dual-zone auto-switching mechanism, two adjustable stainless steel test trays |
| Compliance | Designed per IEC 60068-3-5, ASTM D3418, and ISO 16750-4 environmental stress testing protocols |
| Temperature Range | -40 °C to +100 °C |
|---|---|
| Humidity Range | 30–98 %RH |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤2 °C |
| Humidity Deviation | +2 to –3 %RH |
| Ramp Rate | 0.5–1.2 °C/min |
| Compliance | GB10589, GB10592, GB11158, GB/T5170.2, GB/T5170.5, GB2423.1/2/22, GB2424.1 |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Light Source Type | Internal Illumination Source |
| Compatible Core Materials | Glassy Carbon, Gold, Platinum, Silver, Copper, Aluminum, Nickel, Spectroscopic-Grade Graphite, Isotropic Graphite |
| Core Diameters | 1–6 mm (standard), customizable beyond 6 mm |
| Sheath Materials | PTFE, PEEK, PVDF, PCTFE |
| Tip Length Options | <15 mm, 10 mm, 7 mm, 5 mm, or custom |
| Configurations | Standard Rod-Type, Dual-Mode SEM/AFM-Compatible (Screw-Head or Push-Type), L-Shaped Disk/Grid/Sheet Electrodes |
| Key | Max Load: 100 kg (customizable) |
|---|---|
| Frequency Range | 1–5000 Hz (0.01 Hz resolution) |
| Sweep Range | 1–5000 Hz (duration: 1 s to 30 days) |
| Peak-to-Peak Amplitude | 0–5 mm |
| Max Acceleration | 20 g |
| Vibration Axes | Vertical + Horizontal |
| Waveform | Sinusoidal |
| Programmable Segments | Up to 15 segments, each with user-defined frequency/time |
| Octave Sweeps | 5-segment logarithmic (low→high, high→low, low→high→low, repeatable) |
| Table Surface | 50 × 50 cm (customizable) |
| Cabinet Dimensions (Vertical Mode) | 50 × 20 × 50 cm (L×H×W) |
| Power Supply | 220 V ±20%, 5 A, 2.2 kW |
| Control Modes | Programmable, sweep, logarithmic, octave, amplitude/acceleration regulation, time-based termination |
| Compliance | Designed for IEC 60068-2-6, IEC 60068-2-64, MIL-STD-810H, ISO 16750-3, GB/T 2423.10, GB/T 2423.3, GB/T 2423.17 |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | CWH1350 |
| Price Range | USD 1–9,999 |
| Instrument Type | Portable |
| Temperature Range | −50°C to 1350°C |
| Basic Accuracy | ±2.0°C |
| Temperature Resolution | 0.1°C / 0.1°F |
| Emissivity Adjustment | 0.10–1.00 (adjustable in 0.01 increments) |
| Response Time | <150 ms |
| Laser Aiming | Single-point Class II diode laser (λ = 630–670 nm, output <1 mW) |
| Spectral Response | 6–14 µm |
| Distance-to-Spot Ratio | 50:1 |
| Repeatability | ±0.5% of reading or ±1°C (±1.8°F) |
| Operating Temperature | −20°C to +50°C |
| Storage Temperature | −40°C to +60°C |
| Units | °C / °F selectable |
| Power Supply | 8.0–10.0 VDC |
| Current Consumption | ≤80 mA |
| Enclosure Rating | IP65 |
| Certification | Certified intrinsically safe per GB 3836.1–2010 and GB 3836.4–2010 (Explosion-proof Certificate No. attached to product documentation) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | CWH600 |
| Price Range | USD 1–1,400 |
| Instrument Type | Portable |
| Temperature Range | −50 °C to 650 °C |
| Basic Accuracy | ±1.5 °C |
| Temperature Resolution | 0.1 °C / 0.1 °F |
| Emissivity Adjustment | 0.10–1.00 (step 0.01) |
| Response Time | <400 ms |
| Laser Aiming | Dual Class II Diode Lasers (λ = 630–670 nm, P<1 mW) |
| Spectral Response | 6–14 µm |
| Distance-to-Spot Ratio | 12:1 |
| Repeatability | ±0.5% of reading or ±1 °C (±1.8 °F) |
| Operating Temperature | −10 °C to 50 °C |
| Storage Temperature | −20 °C to 60 °C |
| Display Units | °C / °F switchable |
| Power Supply | 8.0–10.0 V DC |
| Current Draw | ≤80 mA |
| Enclosure Rating | IP54 |
| Certification | MA Certified (China MSHA-equivalent), Ex ib I Mb Intrinsically Safe Mark, CNEX Test Report No. attached |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | cWH850 |
| Price Range | USD 1–1,400 |
| Instrument Type | Portable |
| Temperature Range | −50°C to 850°C |
| Accuracy | ±1.5°C |
| Temperature Resolution | 0.1°C / 0.1°F |
| Emissivity Adjustment | 0.10–1.00 (adjustable) |
| Response Time | <400 ms |
| Laser Aiming | Dual Class II laser (630–670 nm, <1 mW) |
| Spectral Response | 6–14 µm |
| Distance-to-Spot Ratio | 16:1 |
| Repeatability | ±0.5% of reading or ±1°C (±1.8°F) |
| Operating Temperature | −10°C to +50°C |
| Storage Temperature | −20°C to +60°C |
| Display | Backlit LCD with °C/°F toggle |
| Power Supply | 8.0–10.0 VDC, ≤80 mA |
| IP Rating | IP54 |
| Dimensions | 160 × 82 × 41.5 mm |
| Weight | 180 g |
| Data Logging | Optional internal storage for up to 20 readings |
| Alarm Functions | High/Low temperature threshold alert (HAL/LAL) |
| Measurement Modes | Max/Min/DIF/AVG, Hold, Trigger Lock |
| Auto Power-Off | Yes |
| Laser On/Off Switch | Yes |