KARG
Filter
Showing all 10 results
| Brand | KARG |
|---|---|
| Origin | Germany |
| Instrument Type | Free-Fall Dart Impact Tester |
| Standards Compliance | ASTM D1709, ISO 7765-1 |
| Impact Energy Range | As per manufacturer’s specification sheet |
| Impact Velocity | As per manufacturer’s specification sheet |
| Dart Mass Options | Standardized (e.g., 50 g, 100 g, 200 g) per ASTM/ISO |
| Maximum Drop Height | Adjustable up to 2,000 mm (typical range) |
| Load Cell Capacity | Configurable (e.g., ±500 N full scale) |
| Test Mode | Single-dart or multi-dart statistical mode (50% failure threshold determination) |
| Data Output | Analog + digital (RS-232 / USB) |
| Safety Enclosure | Interlocked transparent polycarbonate shield |
| Brand | KARG |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AKM |
| Quotation | Upon Request |
| Blade Travel Speed | 0–800 mm/s |
| Stroke Length | 208 mm |
| Notch Type | V-Notch |
| Feed Rate (Notching) | 0.01–0.3 mm/rev |
| (Fine Adjustment) | 0.01–0.1 mm/rev |
| Saw Cutting Speed | 0.3–1 m/min |
| Saw Rotational Speed | 1000–2000 rpm |
| Notch Depth (Z-axis) | 0.01–0.25 mm |
| Machining Length | ~200 mm |
| Width | 1200 mm |
| Height | 700 mm |
| Depth | 540 mm |
| Weight | 150 kg |
| Power Consumption | ~1 kW |
| Supply Voltage/Frequency | 230 V / 110 V, 50/60 Hz |
| Brand | KARG |
|---|---|
| Origin | Germany |
| Model | C4U / C2U |
| Type | Precision CNC Milling Cutter for Specimen Preparation |
| Axes | 3-axis (X, Y, Z) with T-slot milling table |
| Worktable Dimensions | Standard large-format T-slot surface (compatible with ISO/ASTM fixture systems) |
| Fixturing | Quick-release clamping system for plates, semi-finished components, pipes, and notched specimens |
| Control | Microprocessor-based CNC controller with integrated CAD/CAM software interface |
| Compliance | Designed to support ISO 178, ISO 527, ASTM D638, ASTM D256, and EN ISO 13477 specimen geometry requirements |
| Brand | KARG |
|---|---|
| Origin | Germany |
| Model | DIN 53438 |
| Compliance | DIN 53438, DIN 4102-B2 |
| Chamber Dimensions (W×H×D) | 730 × 950 × 450 mm |
| Weight | 65 kg |
| Sample Holder | Adjustable-angle stainless steel support with interchangeable fixtures |
| Burner | Tilt-adjustable Bunsen-type burner with calibrated flame height indicator |
| Gas Control | Precision mass-flow regulated propane/butane supply system |
| Viewing Window | Heat-resistant borosilicate glass front panel |
| Exhaust | Integrated axial exhaust fan with duct interface |
| Safety Features | Front-access design, thermal insulation, fail-safe gas shutoff |
| Brand | KARG |
|---|---|
| Origin | Germany |
| Model | FMVSS 302 |
| Compliance | FMVSS 302, ISO 3795, DIN 75200 |
| Chamber Material | V4A Stainless Steel (1.4404 / AISI 316L) |
| Sample Holder | Type A & Type B Configurations |
| Flame Source | Adjustable Propane/Butane Burner with Precision Needle Valve |
| Viewing Window | Heat-Resistant Borosilicate Glass |
| Service Access | Side Maintenance Door |
| Optional Fixtures | VW TL 1010 & Porsche PTL 8501 Compliant Sample Clamps |
| Dimensions (W×H×D) | 500 × 385 × 245 mm |
| Weight | 22 kg |
| Brand | Karg |
|---|---|
| Origin | Germany |
| Model | HST 53-3 |
| Temperature Control Range | Room Temperature +5°C to 300°C |
| Internal Chamber Volume | 53 L |
| Internal Dimensions (W×H×D) | 400 × 400 × 330 mm |
| External Dimensions (W×H×D) | 635 × 620 × 575 mm |
| Timer Range | 0–99 hours |
| Power Supply | 220 V AC ±10% |
| Compliance | DIN EN 60811-2-1 |
| Brand | KARG |
|---|---|
| Origin | Germany |
| Model | Kofler HB |
| Type | Hot-block melting point apparatus |
| Principle | Kofler hot-plate method (linear temperature gradient) |
| Application | Rapid qualitative and semi-quantitative melting point determination of organic crystalline solids |
| Brand | Karg |
|---|---|
| Origin | Germany |
| Model | MPS 75 / MPS 150 |
| Max Punching Force | 7,500 N (MPS 75) / 15,000 N (MPS 150) |
| Max Stroke | 40 mm |
| Table Dimensions | 250 × 150 mm |
| Weight | 50 kg |
| Footprint (W×D) | 250 × 240 mm (MPS 75) / 250 × 300 mm (MPS 150) |
| Operation | Lever-Actuated or Pneumatic Option Available |
| Compliance | Configurable for ISO 179, ISO 180, ASTM D6110, ASTM D5041, ISO 13802 Notch Geometries |
| Brand | Karg |
|---|---|
| Origin | Germany |
| Model | SC-1693 |
| Temperature Range | 50–100 °C |
| Test Compliance | ASTM D1693 |
| Notch Dimensions | 19.0 ± 0.5 mm (length) × 0.50 ± 0.05 mm (depth) |
| Specimen Dimensions | 38.0 ± 2.5 mm × 13.0 ± 0.08 mm (rectangular) |
| Notch Geometry | U-shaped cross-section |
| Test Vessel | Borosilicate glass tubes |
| Heating System | Precision thermostatic bath with ±0.3 °C stability |
| Control Interface | Integrated digital controller with timer and temperature logging |
| Brand | KARG |
|---|---|
| Origin | Germany |
| Model | UL94 |
| Chamber Material | Polished Stainless Steel |
| Burner Adjustment | Horizontal travel 240 mm, angular tilt 0°/20°/45° |
| Specimen Holder Travel | Horizontal 840 mm, Vertical 730 mm |
| Specimen Holders | 5 types for multi-standard compliance |
| Timer Range | 0–100 s in 1-s increments |
| Airflow Control | Integrated mass-flow regulated exhaust system |
| Exhaust Fan | Variable-speed centrifugal fan |
| External Dimensions (W×H×D) | 1500 × 1500 × 600 mm |
| Net Weight | 200 kg |
| Applicable Standards | UL 94, ASTM D635, ASTM D3801, ASTM D4804, ASTM D5048, ASTM D4986, IEC 60695-11-10 (replaces ISO 1210), IEC 60695-11-20 (replaces ISO 10351), ISO 9772, ISO 9773 |