Metravib
Filter
Showing all 7 results
| Brand | Metravib |
|---|---|
| Origin | France |
| Model | DMA+ 300 |
| Instrument Type | Dynamic Mechanical Analyzer (DMA/DMTA) |
| Temperature Range | –150 °C to +500 °C |
| Temperature Accuracy | ±0.1 °C |
| Force Range | ±150 N (peak-to-peak: 300 N) |
| Displacement Range | ±6 mm (peak-to-peak: 12 mm) |
| Frequency Range | 1×10⁻⁵ Hz to 200 Hz (up to 1000 Hz with optional high-frequency module) |
| Minimum Detectable Force | 0.01 N |
| Minimum Detectable Displacement | 0.05 µm |
| Stiffness Measurement Span | >7 decades (250 Pa to 3×10¹² Pa) |
| Environmental Control Options | O₂ concentration control (10 ppm–20% vol), cryogenic cooling (LN₂ or air-cooled to –150 °C) |
| Brand | Metravib |
|---|---|
| Origin | France |
| Model | DMA+1000 |
| Instrument Type | Dynamic Mechanical Analyzer (DMA/DMTA) |
| Temperature Range | −150 °C to 500 °C |
| Temperature Accuracy | ±0.1 °C |
| Force Range | −500 N to +500 N (peak-to-peak: 1000 N) |
| Displacement Range | ±6 mm (peak-to-peak: 12 mm) |
| Frequency Range | 1×10⁻⁵ Hz to 200 Hz (optional up to 1000 Hz) |
| Minimum Detectable Force | 0.01 N |
| Minimum Detectable Displacement | 0.1 µm |
| Maximum Measurable Modulus | 3×10¹² Pa |
| Dynamic Modulus Range | 6 decades |
| Environmental Control Options | O₂ concentration control (10 ppm–20% O₂), forced-air cooling (−70 °C), liquid nitrogen cooling (−150 °C) |
| Brand | Metravib |
|---|---|
| Origin | France |
| Model | DMA+1000 / DMA+2000 + Xpander |
| Instrument Type | Dynamic Mechanical Analyzer (DMA/DMTA) |
| Automation Level | Fully Automated Robotic System |
| Compliance | Designed for ISO 6721, ASTM D4065, ASTM D7028, ISO 11359-2, and USP <1031> compliant testing environments |
| Operating Modes | Tension, Compression, Dual Cantilever, Single Cantilever, Shear |
| Sample Capacity | Up to 120 specimens per rack (configurable) |
| Footprint | < 1.2 m² |
| Control Interface | Touchscreen HMI + Ethernet-connected PC workstation |
| Brand | Metravib |
|---|---|
| Origin | France |
| Model | DMA+2000 |
| Instrument Type | Dynamic Mechanical Analyzer (DMA/DMTA) |
| Temperature Range | −150 °C to 500 °C |
| Temperature Accuracy | ±0.1 °C |
| Force Range | −1000 N to +1000 N (peak-to-peak: 2000 N) |
| Displacement Range | ±6 mm (peak-to-peak: 12 mm) |
| Frequency Range | 1×10⁻⁵ Hz to 200 Hz (optional up to 1000 Hz) |
| Minimum Detectable Force | 0.01 N |
| Minimum Detectable Displacement | 0.1 µm |
| Modulus Measurement Range | 500 Pa to 3×10¹² Pa (6 decades) |
| Brand | Metravib |
|---|---|
| Origin | France |
| Model | DMA+NG |
| Instrument Type | Dynamic Mechanical Analyzer (DMA/DMTA) with Integrated Crack Growth Module |
| Temperature Range | −150 °C to 500 °C |
| Temperature Accuracy | ±0.1 °C |
| Force Range | 0.1–500 N |
| Displacement Range | 0.1–6000 µm |
| Frequency Range | 10⁻⁵–200 Hz |
| Crack Measurement Channels | 2 or 4 simultaneous crack tip tracking positions |
| In-situ Initial Crack Generation | Yes, inside climate-controlled chamber |
| Chamber Oxygen Control | 10 ppm–20% O₂ adjustable |
| Brand | Metravib |
|---|---|
| Origin | France |
| Model | DMA25/50 |
| Instrument Type | Dynamic Mechanical Analyzer (DMA/DMTA) |
| Temperature Range | −150 °C to 500 °C (upgradable to 600 °C) |
| Temperature Accuracy | ±0.1 °C |
| Temperature Ramp Rate | ±0.1 to ±10 °C/min |
| Dynamic Force Range | ±25/±50 N (peak-to-peak: 50/100 N) |
| Displacement Range | ±3/±6 mm |
| Frequency Range | 1×10⁻⁵ to 200 Hz |
| Modulus Range | 10⁵ to 10¹¹ Pa |
| Compliance | ASTM D4065, ISO 6721, ISO 11357-2, USP <1031>, FDA 21 CFR Part 11 (software-enabled) |
| Brand | Metravib |
|---|---|
| Origin | France |
| Model | VHF104 |
| Instrument Type | Dynamic Mechanical Analyzer (DMA/DMTA) |
| Temperature Range | −50 to 110 °C |
| Temperature Accuracy | ±0.5 °C |
| Temperature Stability | ±0.1 °C |
| Heating/Cooling Rate | 0.1–10 °C/min |
| Frequency Range | 100–10,000 Hz |
| Force Range | ±150 N |
| Displacement Range | ±10,000 µm |
| Strain Range | 10⁻⁶–30% |
| Deformation Modes | Tension, Compression, Annular Shear |
| Standard Masses | 5, 10, 20, 40, 80, 200 g |