Narda
Filter
Showing all 7 results
| Brand | Narda |
|---|---|
| Origin | Germany |
| Model | AMB 8057 |
| Frequency Range (E-field) | 100 kHz – 3 GHz |
| Frequency Range (H-field) | 10 Hz – 5 kHz |
| Data Storage Capacity | Up to 338 days @ 15-min intervals (3-band mode) |
| Sampling Interval | 3 seconds (simultaneous multi-band acquisition) |
| Communication | Dual-mode GSM/GPRS + RS-232C |
| Power Supply | Integrated Li-ion battery (3.6 V, 13 Ah) with solar panel (4 V, 2.5 Ah lead-acid backup) |
| Operating Temperature | −10 °C to +50 °C |
| Ingress Protection | IP54 |
| Data Capture Rate | ≥99% |
| Alarm Triggers | Field strength exceedance, memory full, temperature out-of-range, low battery, probe disconnection, enclosure open |
| SMS Alert Support | Up to two mobile numbers |
| Software | AMB-8057-SW-02 (data download, threshold-based alerts, RMS/AVG/MAX computation, linear/logarithmic plotting, calibration traceability) |
| Brand | Narda |
|---|---|
| Origin | Germany |
| Model | EFA-300 |
| Frequency Range (Broadband) | 5 Hz – 32 kHz |
| Measurement Modes | RMS, Peak, Vector Peak, Time-Domain STD Weighting |
| Filter Options | Bandpass (15–2000 Hz, 0.1 Hz resolution), Bandstop (15–2000 Hz) |
| Probe Compatibility | Isotropic Magnetic Field Probes (A-type: 100 cm² |
| D-type | 30 mm diameter), Isotropic Electric Field Probe (up to 200 kV/m) |
| Typical Broadband Uncertainty | ±3% @ ≥40 nT (5–2 kHz), ±3% @ ≥5 V/m (5–2 kHz) |
| Display | 128×64 LED matrix with backlight |
| Interface | Optical RS-232 (fiber optic cable included) |
| Operating Temperature | 0–50 °C |
| Battery | Rechargeable NiMH (5×C-cell) |
| Dimensions | 110 × 200 × 60 mm |
| Weight | ~1000 g |
| Calibration Interval | 24 months |
| Optional Modules | FFT Narrowband Spectrum Analysis & Harmonic Measurement (9 harmonics), Remote PC Control Software EFT-TS |
| Brand | Narda |
|---|---|
| Origin | Germany |
| Model | EP602 |
| Frequency Range | 5 kHz to 9.25 GHz |
| Dynamic Range | 1.5–1500 V/m |
| Overload Limit | 3000 V/m |
| Sampling Rate | 22 samples/sec |
| Output Interface | Fiber-optic direct connection to PC |
| Calibration Data Storage | Embedded memory with traceable calibration factors |
| Temperature Monitoring | Integrated sensor for real-time thermal compensation |
| Physical Size | Smallest in Narda’s EP-series field probe lineup |
| Compliance | Designed for IEC 61000-4-3, MIL-STD-461G RS103, DO-160 Section 20, and other RF immunity test standards |
| Brand | Narda |
|---|---|
| Origin | Germany |
| Model | PMM 8053B |
| Frequency Range | 5 Hz – 40 GHz |
| Low-Frequency Probe | EHP-50C (5 Hz – 100 kHz, E/H-field isotropic, 0.01 V/m – 100 kV/m / 1 nT – 10 mT) |
| RF Probes | EP-105 (100 kHz – 1 GHz), EP-300/EP-330/EP-301 (100 kHz – 3 GHz), EP-183 (1 MHz – 18 GHz), EP-408 (1 MHz – 40 GHz), HP-102 (30 MHz – 1 GHz), HP-032 (100 kHz – 30 MHz) |
| Isotropic Measurement Capability | Yes |
| Spectral Analysis | Real-time FFT with 7 selectable bandwidths (LF), XYZ vector resolution |
| Data Logging | Continuous 24-h recording, internal memory + PC export via RS-232/fiber optic |
| Compliance | IEC 61786-1:2013, IEC 62232:2017, EN 50492:2008, IEEE C95.3-2019 |
| Calibration | Internal reference source, traceable to PTB/NIST |
| Remote Operation | Up to 40 m via fiber optic |
| Multi-probe Expansion | Up to 16 probes (optional) |
| Brand | Narda |
|---|---|
| Origin | Germany |
| Model | PMM8056 |
| Electric Field Frequency Range | 3 MHz–40 GHz |
| Electric Field Measurement Range | 0.6 V/m–30 V/m |
| Electric Field Frequency Response | ±3 dB |
| Magnetic Field Frequency Range | 30 MHz–300 MHz |
| Magnetic Field Measurement Range | 7.3 mA/m–3 A/m |
| Magnetic Field Frequency Response | ±3 dB |
| Display | Backlit LCD showing real-time field strength, user-defined thresholds, date/time |
| Audio-visual Alarm | Threshold-triggered audible tone and visual indicator |
| Data Logging | 1 sample/sec (instant), max value every 60 sec, 6-min moving average |
| Interface | Infrared (IR) PC interface |
| Battery Life | 40 h (9 V alkaline, 1200 mAh) |
| Dimensions | 62 × 30 × 190 mm |
| Weight | 200 g |
| Probe Type | Integrated isotropic E-field and H-field sensors |
| Compliance | Designed for compliance with GB 8702–2014 (China EMF exposure limits), ICNIRP 2020 guidelines, and IEEE C95.1–2019 |
| Brand | Narda |
|---|---|
| Origin | Germany |
| Model | SRM 3000 |
| Frequency Range | 100 kHz – 3 GHz |
| Measurement Modes | Safety Assessment, Spectrum Analysis (with user-defined RBW integration), UMTS P-CPICH Option, Time-Domain Monitoring |
| RBW | 1 kHz – 5 MHz (configurable) |
| Dynamic Range | −121 dBm to +23 dBm |
| E-field Probe | Isotropic, 5 MHz – 3 GHz, Max. 200 V/m (Destruction Limit: 1000 V/m) |
| Operating Temperature | −10 °C to +50 °C |
| Humidity | Up to 95 % RH (IP54) |
| Battery Life | ~3.5 h |
| Dimensions | 255 × 195 × 60 mm |
| Weight | 1.9 kg (instrument), 450 g (probe) |
| Calibration Interval | 24 months |
| Brand | Narda |
|---|---|
| Origin | Germany |
| Model | SRM-3006 |
| Frequency Range | 9 kHz – 6 GHz |
| Display Range | DANL to +20 dBm |
| Measurement Range | −30 dBm to +20 dBm (1 dB steps) |
| RF Input Attenuation | 0–50 dB (1 dB steps) |
| Level Uncertainty | ≤1.2 dB (15–30 °C) |
| Antenna Auto-Detection | Yes (type & calibration date) |
| Compliance Standards | HJ 1151–2020, IEC 62232, EN 50492, ICNIRP, GB 8702 |