OCS
Filter
Showing all 7 results
| Brand | OCS |
|---|---|
| Origin | Germany |
| Model | FSA-100 |
| Detection Resolution | down to 5 µm |
| Defect Classification Levels | 10 user-defined grades |
| Line Speed Independence | Yes (via roller-mounted encoder) |
| Imaging Sensor | High-speed line-scan camera |
| Light Source | Integrated uniform illumination module |
| Software Interface | Menu-driven, SAA-compliant GUI |
| Data Output | Real-time display, HDD storage, customizable PDF/printed reports (tabular & color bar chart formats) |
| User Access Control | Password-protected parameter profiles |
| Material Compatibility | Transparent (films, glass) and opaque (paper, aluminum foil, stainless steel, nonwovens) |
| Brand | OCS |
|---|---|
| Origin | Germany |
| Model | ME-MFA |
| Drive System | Frequency-controlled servo motors for all drive rollers |
| Control Interface | Dual independent LCD touch-screen HMI (extruder + winder) |
| Tension Control | Two-zone closed-loop tension control system |
| Data Integration | LIMS-compatible digital output (OPC UA & Modbus TCP), remote operation enabled |
| Certification Context | Designed to support ASTM D2673, ISO 1133, ISO 14389, and internal QC protocols aligned with ICH Q5, USP <1043>, and GMP Annex 15 traceability requirements |
| Brand | OCS |
|---|---|
| Origin | Germany |
| Model | OCS Online Analysis |
| Type | Integrated In-Process Polyolefin Resin Monitoring Platform |
| Compliance | Designed for ISO/IEC 17025-aligned QC environments, compatible with FDA 21 CFR Part 11–enabled DCS integration |
| Brand | OCS |
|---|---|
| Origin | Germany |
| Model | OP5 |
| Compliance | ASTM D1238, ISO 1133 |
| Accuracy | ±0.5% |
| Calibration | Fully automated, zero manual calibration required |
| Sampling | Continuous micro-sampling (≈20 g per cycle) |
| Maintenance | Single-gear-pump architecture |
| Installation | Process-integrated, non-intrusive inline configuration |
| Application Domain | Polyolefins, polyethylene (PE), polypropylene (PP), thermoplastic elastomers (TPE), engineering plastics |
| Brand | OCS |
|---|---|
| Origin | Germany |
| Model | PS-800C |
| Application Scope | Polyolefin resin pellets (transparent & semi-transparent) |
| Throughput | Up to 1,000 kg/h |
| Detection Principle | Dual 3-CCD color line-scan imaging under free-fall conditions |
| Output Functions | Contamination identification, particle rejection triggering, color-ratio quantification |
| Compliance Context | Designed for GLP-aligned QC environments |
| Brand | OCS |
|---|---|
| Origin | Germany |
| Model | PS25C |
| Camera | 3-CMOS Color Imaging Sensor |
| Minimum Detectable Particle Size | ≥20 µm |
| System Dimensions (Main Unit) | 900 × 500 × 450 mm |
| Weight (Main Unit) | ~30 kg |
| Image Processing Unit Dimensions | 190 × 450 × 600 mm |
| Weight (IPU) | ~12 kg |
| Video Output | Composite (1 V p-p, 75 Ω) & RGB (0.7 V p-p, 75 Ω) |
| SNR | 58 dB |
| Line Frequency | 15.625 kHz |
| Power Consumption | 5.6 W |
| Brand | OCS |
|---|---|
| Origin | Germany |
| Model | ST-4 |
| Configuration | Desktop-integrated line-scan imaging system with dual-mode (transmission/reflection) illumination |
| Detection Principle | High-speed linear CCD-based surface defect metrology |
| Sample Handling | Motorized precision translation stage with programmable scan speed and repeatable positioning |
| Software Platform | Windows-based GUI with real-time image acquisition, defect classification, and audit-trail-enabled data logging |
| Compliance Context | Designed for R&D lab environments supporting ISO 9001-aligned quality documentation workflows and GLP-compliant experimental traceability |