Sciteq
Filter
Showing all 5 results
| Brand | Sciteq |
|---|---|
| Origin | Denmark |
| Model | Sciteq 2000-2 |
| Controller | S40 with 5.7" color touchscreen |
| Cabinet footprint | 800 mm × 800 mm (24″ rack-compatible) |
| Pressure control system | DPCS (Dynamic Pressure Control System) |
| Test modes | Static hydrostatic pressure, burst pressure, cyclic pressure (up to 1 Hz “sawtooth” profile) |
| Remote support capability | Secure Ethernet-based firmware update, diagnostics, and remote desktop access |
| Modular architecture | Supports up to 5 independent pressure stations in base configuration |
| Pressure source | High-pressure axial piston pump + 4 L accumulator |
| Brand | Sciteq |
|---|---|
| Origin | Denmark |
| Instrument Type | Falling Weight Impact Tester |
| Model | B50 |
| Hammer Mass Range | 0.250–16 kg |
| Impact Heights | 2 m, 3 m, 4 m (model-dependent) |
| Compliance | ISO 3127, EN 744, EN 1411, EN 1452, ASTM D2444 |
| Impact Velocity Accuracy | >95% of theoretical free-fall velocity |
| Sample Diameter Range | Ø32 mm to Ø630 mm (customizable beyond) |
| Dimensions (H×W×D) | 4050 × 1800 × 600 mm |
| Weight | ~600 kg |
| Operating Temperature | 5–70 °C |
| Relative Humidity | ≤70% |
| Power Supply | 3 × 400 V AC |
| Compressed Air Requirement | 4–8 bar |
| Hammer Mass Tolerance | ±0.005 kg (per ISO/EN standards) |
| Max. Test Frequency | 15 impacts/min |
| Safety Features | Vacuum-based hammer retention with fail-safe slow descent, interlocked safety door, dual-hand release control, integrated impact velocity monitoring |
| Brand | Sciteq |
|---|---|
| Origin | Denmark |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Sciteq HCP |
| Pricing | Upon Request |
| Brand | Sciteq |
|---|---|
| Origin | Denmark |
| Model | RCP |
| Standard Compliance | ISO 13477 |
| Test Principle | Static Pressurized Impact Initiation of Brittle Fracture in Thermoplastic Pipes |
| Application Scope | Critical Temperature (T<sub>c</sub>) Determination for Rapid Crack Propagation in PE, PP, and Other Pressure Pipes |
| Brand | Sciteq |
|---|---|
| Origin | Denmark |
| Model | TC-micro |
| Configuration Options | TC50 (2×Ø50 mm or 4×Ø32 mm) / TC63 (2×Ø63 mm or 4×Ø32 mm) |
| Pressure Control | Constant-pressure hydraulic circuit |
| Thermal Range | 5–95 °C (adjustable setpoints) |
| Water Reservoirs | Dual 500 L pressurized tanks (hot & cold) |
| Flow Monitoring | Integrated inline flow sensors per test channel |
| Minimum Flow Velocity | ≥0.5 m/s (automatically maintained) |
| Test Chamber Architecture | Four independent, sealed micro-chambers with individual leak detection |
| Control Interface | 15-inch industrial touchscreen HMI with PLC-based logic |
| Safety Compliance | EN 61000-6-2/6-4, EN ISO 13857, integrated emergency stop circuits |