Tinius Olsen
Filter
Showing all 16 results
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | 20 kN Pneumatic Grip |
| Actuation Pressure | 80 psi (5.5 bar) |
| Maximum Clamping Force | 40 kN |
| Jaw Face Dimensions | 25 mm × 50 mm |
| Control | Foot-Operated Valve |
| Jaw Type | Dual-Pneumatic, Centerline-Aligned |
| Initial Clamping Force | Spring-Preloaded |
| Compatibility | Tinius Olsen ST-Series Dual-Column Universal Testing Machines |
| Integration Capability | Yes — Compatible with Automated Test Systems |
| Jaw Face Interchangeability | Yes — Multiple Standard & Custom Face Options Available |
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | 603HDTV, 303HDTV |
| Compliance Standards | ISO 75-1/2, ISO 306, ASTM D648, ASTM D1525 |
| Maximum Simultaneous Test Positions | 6 (603HDTV), 3 (303HDTV) |
| Oil Bath Stations | 6 (603HDTV), 3 (303HDTV) |
| Load Application | Pneumatic vertical loading with air-bearing guide ring |
| Displacement Resolution | 0.001 mm |
| Load Accuracy | Certified for 0.45 MPa (ISO 75) and 1.0 MPa / 5.0 MPa (ISO 306) |
| Cooling System | Integrated heat exchanger (603HDTV) |
| Software | Horizon HDV with SPC, audit trail, CFR 21 Part 11–ready configuration options |
| Data Export Formats | HTML, CSV, PDF |
| Password Protection | Dual-level authentication |
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | AE300 / AE500 |
| Gauge Length Range | 10 mm to max travel (300 mm for AE300 |
| Travel Compensation | Motor-driven, ball-bearing transmission |
| Measurement Principle | Optical incremental encoder with zero-backlash linear guidance |
| Arm Configuration | Four-arm symmetrical design with full-bridge strain gauge springs |
| Compliance | ASTM E8/E21, ISO 6892-1, ISO 527-1, EN 10002-1, GB/T 228.1 |
| Brand | Tinius Olsen |
|---|---|
| Origin | United Kingdom |
| Model | DG |
| Load Capacity Options | 50 kN, 100 kN, 250 kN, 500 kN, 1000 kN, 1500 kN, 2000 kN, 3000 kN |
| Power Supply Options | 110 VAC / 220 VAC, 50 Hz or 60 Hz, 1-phase |
| Compliance | ASTM C39, AASHTO T22, EN 12390-3, -4, -5, BS 1881-116 |
| Safety Features | Interlocked safety door, overload & overtravel protection, automatic platen alignment |
| Control System | Integrated digital controller with dual-unit display (kN/lbf, MPa/psi), real-time load rate bar graph, 2000-test memory, parallel port for direct printing |
| Calibration Range | 1–100% of full-scale capacity |
| Standard Accessories | RS-232 9-pin cable, spherical seating base with upper platen, lower platen, spacers |
| Brand | Tinius Olsen |
|---|---|
| Origin | United Kingdom |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | F012 |
| Price Range | USD 14,000 – 70,000 |
| Load Cell Capacity | 10 N (1000 g) |
| Test Speed Range | 0.001–1000 mm/min |
| Maximum Travel | 755 mm |
| Extension Resolution | 0.001 mm |
| Controller | HMC Wireless Bluetooth Handheld Controller |
| Optional Accessories | Tension Grips, PC-Based Testing Software |
| Brand | Tinius Olsen |
|---|---|
| Origin | United Kingdom |
| Model | FA |
| Load Capacity Options | 50 kN to 3000 kN |
| Compliance | ASTM C39, ASTM C469, ASTM C78, AASHTO T22, EN 12390-3, BS 1881-116 |
| Control System | Microprocessor-based with dual-speed hydraulic pump |
| Data Storage | Up to 2000 test records |
| Display | 4-line alphanumeric LCD with real-time load rate, peak load, and pressure readout |
| Interfaces | RS232 and parallel port |
| Calibration Range | 1–100% of full scale (±1% accuracy across range) |
| Strain Measurement Option | LVDT-compatible (0.001 mm resolution) |
| Flexural Testing Capability | Optional with dedicated fixtures |
| Safety | Interlocked front/rear access doors, debris chute, automatic load release, emergency stop |
| Brand | Tinius Olsen |
|---|---|
| Model | IT406 / IT542 |
| Origin | USA |
| Impact Energy | 406 J / 542 J |
| Impact Velocity | 5.5 m/s |
| Maximum Lifting Height | 1.5 m |
| Compliance | ASTM E23, ISO 148-1, EN 10045-2 |
| Instrument Type | Pendulum Impact Tester |
| Sample Support Options | Charpy (simply supported beam), Izod (cantilever beam), Tensile Impact |
| Safety Features | Interlocked guarding, mechanical safety latch, optional electronic brake and auto-return system |
| Display Options | Analog scale (ft·lbf, J, kg·m) + optional digital readout |
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | MP1200 |
| Heating Zones | 3-zone independent PID control with Pt100 sensors |
| Temperature Stability | ±0.1 °C |
| Temperature Uniformity | ±0.1 °C across furnace |
| Control Interface | 7-inch capacitive touchscreen |
| Data Interface | USB 2.0 |
| Die Release Mechanism | Drop-down die holder |
| Weight Loading | Manual or motorized weight lift option |
| Standard Die | 2.095 mm diameter × 8.000 mm length (ASTM D1238 / ISO 1133 compliant) |
| Sample Cutter | Optional manual or automatic |
| Mirror Viewport | Integrated stainless-steel mirror for real-time extrudate observation |
| Brand | Tinius Olsen |
|---|---|
| Origin | United Kingdom |
| Model | MU |
| Load Capacity Options | 50 kN, 100 kN, 250 kN, 500 kN, 1000 kN, 1500 kN, 2000 kN, 3000 kN |
| Compliance | ASTM C39, ASTM C469, ASTM C78, AASHTO T22, EN 12390-3, BS 1881-116, ISO 7500-1 Class 1 |
| Control System | Microprocessor-based with dual-speed hydraulic pump, programmable loading rate, peak load hold, auto-shutdown, emergency stop |
| Data Handling | Onboard memory (2000 test records), real-time clock, RS232 & parallel port outputs, unit conversion (lbf, kN, MPa, psi) |
| Structural Design | Fully welded frame with precision-ground hydraulic piston, hardened & polished platens, self-aligning upper platen, spherical seating base, interlocked front/rear safety doors |
| Calibration Range | 1–100% of full scale |
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | SL Series |
| Load Capacity Range | 150 kN – 3000 kN |
| Accuracy | ±0.1% of indicated load (0.2–100% full scale) |
| Compliance | ASTM E4, ASTM E8/E21, ISO 7500-1, ISO 6892-1, GB/T 228.1 |
| Calibration Traceability | NIST-traceable |
| Frame Architecture | Four-column, dual-pressure hydraulic loading system |
| Control Options | ProTerm wired controller, HMC handheld Bluetooth controller, PC-based virtual controller |
| Software | Horizon Materials Testing Software |
| Frame Configurations | Fully enclosed, semi-open front, fully open front, adjustable or fixed crosshead |
| Optional Accessories | Extended columns & lead screws (up to +914 mm), environmental chambers (–185 °C to 1200 °C), hydraulic wedge grips, T-slot test tables, high-temperature furnaces, custom tooling kits |
| Brand | Tinius Olsen |
|---|---|
| Origin | United Kingdom |
| Model | ST Series |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity Range | 1 kN to 300 kN (0.2%–100% load cell accuracy) |
| Crosshead Speed Range | 0.001–1000 mm/min (model-dependent) |
| Load Cell Accuracy | ±0.2% of reading from 0.2% to 100% of capacity |
| Sampling Rate | Up to 2.73 kHz per channel (software-limited to 1 kHz via USB 2.0) |
| Compliance | ASTM E4, ASTM E8/E8M, ISO 7500-1, ISO 527, ISO 6892-1, EN 10002-1, USP <1041>, FDA 21 CFR Part 11 (audit trail & electronic signature enabled) |
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | TO-550 |
| Max Load Capacity | 50 kN |
| Loading Rate | 50.8 mm/min |
| Vertical Travel Range | 250–470 mm |
| Horizontal Clearance | 265 mm |
| Platen Diameter | 133 mm |
| Platen Stroke | 25 mm |
| Motor Power | 375 W |
| Dimensions (L×W×H) | 550 × 400 × 870 mm |
| Weight | 60 kg |
| Standards Compliance | ASTM D1559, BS 598-107, EN 12697-34, AASHTO T 245 |
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | TO-553 |
| Compaction Hammer Mass (Light) | 4.5 kg |
| Drop Height | 457 mm |
| Compaction Hammer Mass (Heavy) | 10.2 kg |
| Sample Diameter Options | 100 mm (TO-553-1-03) or 152.4 mm (TO-553-2-03) |
| Power Supply | 220 V, 50 Hz |
| Compliance Standards | BS 598-107, EN 12697-10 & -30, AASHTO T245, ASTM D5581–1996, ASTM D6926 |
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | TO-561 |
| Compliance | ASTM D 36, ASTM E 28, AASHTO T 53, EN 1427, BS 2000 |
| Voltage/Frequency | 220 V / 50 Hz |
| Sample Holder | Dual brass ring assembly with heat-resistant glass bath |
| Ball Diameter | 9.5 mm steel sphere |
| Heating System | Adjustable electric heating plate with magnetic stirrer |
| Temperature Display | Digital PID-controlled readout (±0.1 °C resolution) |
| Accessories Included | Two conical rings, two ball centering guides, two steel balls, ring holder assembly, heated stirring plate |
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | TP-563 |
| Compliance | ASTM D2172, AASHTO T58/T164, EN 12697-1 |
| Adjustable Speed Range | 0–3600 rpm |
| Sample Capacity Options | 1500 kg or 3000 kg |
| Power Supply | 220 V, 50 Hz |
| Includes | 25 precision filter paper discs |
| Construction | Machined aluminum rotating bowl, cast iron housing, vertical shaft drive |
| Operation Mode | Electrical motor-coupled centrifugation |
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | Vector U200 |
| Field of View (FOV) | 200 mm |
| Gauge Length Range | 25–180 mm (longitudinal) |
| Resolution | 0.5 µm |
| Compliance | ISO 9513 Class 0.2 / ASTM E83 Class B1 |
| Output Options | Analog (±10 V) and/or Serial Digital (RS-232/RS-485, ASCII or Modbus RTU) |
| Dimensions | 200 × 70 × 250 mm (W × H × D) |
| Marking Modes | Dot, Ring, Line, Spot, Edge Tracking, Surface Tracking |