TN Testing
Filter
Showing all 21 results
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNC-200AS |
| Instrument Type | Metallographic Cutting Machine |
| Sample Chamber Opening | 210 mm |
| Clamping System | High-Strength Screw-Actuated Fixture (Integrated Steel Construction, Heat-Treated) |
| Optional Features | Smart Feed Control (Current-Load Adaptive Reciprocating Feed), Magnetic Coolant Filtration Unit, Stainless-Steel Enclosed Feed Mechanism |
| Control Interface | Integrated Waterproof LED Panel with Manual/Auto Mode Toggle, Real-Time Feed Speed Display & Adjustment |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNC-200MS |
| Instrument Type | Metallographic Cutting Machine |
| Sample Chamber Opening | 210 mm |
| Clamping System | Manual Screw-Actuated High-Strength Fixture |
| Optional Features | Smart Feed Control (current-load adaptive reciprocating feed), Magnetic Coolant Filter, LED Waterproof Control Panel, Reinforced Safety Glass Viewing Window |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNC-230AS |
| Instrument Type | Metallographic Cutting Machine |
| Safety Certification | CE-compliant |
| Sample Chamber Opening | 210 mm |
| Clamping System | High-Strength Screw-Actuated Fixture (Integrated Steel Construction, Heat-Treated) |
| Optional Features | Smart Feed Control (Current-Load Adaptive Reciprocating Feed), Magnetic Coolant Filtration Unit, Stainless-Steel Enclosed Feed Mechanism |
| User Interface | Integrated LED Waterproof Control Panel with Feed Speed Adjustment & Display, One-Touch Auto-Feed Activation |
| Safety | Full Tempered Safety Glass Viewing Window, CE-Conformant Electrical & Mechanical Design |
| Maintenance | Lubrication-Based Routine Service (Feed Screw Only), Optional Scheduled Maintenance Program Available |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNC-230MS |
| Instrument Type | Manual Metallographic Cutting Machine |
| Sample Clearance | 210 mm |
| Clamp Type | High-Strength Screw-Actuated Fixture (Standard) / Optional Quick-Adjust Sliding Rail Clamp (TNC-355ASL) |
| Optional Features | Smart Feed Control, Magnetic Coolant Filter, IP65-rated LED Control Panel |
| Compliance | EN 61000-6-2/-6-4, EN 60204-1, CE Marked for Machinery Directive 2006/42/EC |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNC-255AS |
| Instrument Type | Metallographic Cutting Machine |
| Safety Certification | CE-compliant |
| Sample Chamber Opening | 210 mm |
| Clamping System | High-Strength Screw-Type Fixture (Integrated Steel Construction, Heat-Treated) |
| Optional Features | Smart Feed Control (Current-Load Adaptive Reciprocating Feed), Magnetic Coolant Filtration Unit, Stainless-Steel Enclosed Feed Mechanism |
| User Interface | Integrated LED Waterproof Control Panel with Feed Speed Adjustment & Display, Manual/Auto Mode Toggle via Handwheel or Panel Button |
| Safety | Tempered Safety Glass Viewing Window (Full Frontal Coverage), Auto-Retract to Home Position with Cooling Assurance, Audible Completion Alert |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNC-255MS |
| Instrument Type | Metallographic Cutting Machine |
| Safety Certification | CE-compliant |
| Sample Chamber Opening | 210 mm |
| Clamp Type | Manual High-Strength Screw-Actuated Fixture |
| Optional Features | Smart Feed Control, Magnetic Coolant Filter, IP65-rated LED Control Panel |
| Compliance | Designed per EN 61000-6-2/6-4, EN 60204-1, and ISO 13857 for operator safety |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNC-305ASL |
| Instrument Type | Metallographic Cutting Machine |
| Sample Chamber Opening | 210 mm |
| Safety | Reinforced Tempered Glass Viewing Window |
| Automation | Motorized Feed with End-Point Detection & Auto-Retract |
| Optional Features | Smart Feed Control (Current-Load Adaptive), Magnetic Coolant Filtration System, Stainless Steel Protected Feed Mechanism |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNC-35 |
| Instrument Type | Precision Cutting Machine |
| Sample Chamber Opening | 210 mm |
| Optional Features | Smart Feed Control, Magnetic Coolant Filter, LED Waterproof Control Panel, Stainless Steel Protected Feed Mechanism |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNC-355ASL |
| Instrument Type | Metallographic Cutting Machine |
| Compliance | CE Certified |
| Sample Chamber Opening | 210 mm |
| Fixture Type | Continuous-Adjustment Linear Rail Clamp |
| Optional Features | Smart Feed Control, Magnetic Coolant Filtration System, LED Waterproof Control Panel |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNC-50B |
| Instrument Type | Metallographic Cutting Machine |
| Sample Chamber Opening | 210 mm |
| Clamping System | Continuous-Slide Heavy-Duty Fixture (TNC-355ASL) & High-Strength Screw-Type Fixture (for TNC-200/230/255) |
| Optional Features | Smart Feed Control, Magnetic Coolant Filter, IP65-Rated LED Control Panel |
| Compliance | EN 61000-6-2/6-4, EN 60204-1, CE Marked |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNM-32AX |
| Mounting Type | Hot Compression Mounting |
| Max Pressure | 4000 PSI (280 kgf/cm²) |
| Temperature Range | 110–200 °C (PID Controlled) |
| Mounting Diameter | Ø32 mm |
| Drive System | Variable-Frequency-Controlled Hydraulic Actuation |
| Fill Mechanism | Rotational Down-Press with Auto-Alignment |
| Preheating Function | Yes |
| Safety Certifications | CE Compliant |
| Cooling | Tap Water or Optional 40 L Recirculating Chiller |
| Power Supply | 220 V, 50/60 Hz, 2400 W Total |
| Dimensions (W×D×H) | 450 × 695.5 × 569 mm |
| Weight | 82 kg |
| Standard Accessories | 500 g Resin Kit, Spatula, Funnel, Release Agent, 2 × 2 m Inlet/Outlet Hoses |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNM-40AX |
| Type | Hydraulic Hot Mounting Press |
| Maximum Molding Pressure | 3200 PSI (224 kgf/cm²) |
| Mold Cavity Diameter | Ø40 mm |
| Temperature Range | 110–200 °C (PID Controlled) |
| Power Supply | 220 V AC, 50/60 Hz |
| Heating Power | 1800 W |
| Total System Power | 2400 W |
| Dimensions (W×D×H) | 450 × 695.5 × 569 mm |
| Weight | 83 kg |
| Cooling | Tap Water or Optional 40 L Recirculating Chiller |
| Compliance | CE Certified |
| Control System | Programmable Logic Controller (PLC) with Touch Interface |
| Preheating Function | Yes |
| One-Touch Auto Cycle | Yes |
| Mold Alignment Mechanism | Rotational Down-Press with Positive Mechanical Registration |
| Pressure Control | Variable-Frequency Hydraulic Drive with Real-Time Compensation |
| Safety Features | Dual-Stage Thermal Lockout, Emergency Stop, Overload Protection, Insulated Lid, Fan-Controlled Active Heat Dissipation |
| Memory Slots | 9 Custom Programs |
| Mounting Modes | 4 Predefined Process Profiles (Phenolic, Acrylic, Segmented T/P, Target-Temperature-Compensated) |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNM-AX6 |
| Instrument Type | Hot Mounting Press |
| Maximum Cavity Capacity | 6 |
| Max Specimen Height | 30 mm |
| Mold Tube Diameter | Ø32 mm |
| Maximum Molding Pressure (in mold tube) | 1625 psi (114 kgf/cm²) |
| Operating Pressure | 130 kgf/cm² |
| Temperature Range | 110–200 °C |
| Heating Power | 3000 W |
| Total Power Consumption | 3500 W |
| Dimensions (W×D×H) | 540 × 552 × 1300 mm |
| Weight | 120 kg |
| Cooling Water Inlet/Outlet | 3/8″ / 5/8″ BSP |
| Control Interface | Touchscreen Panel with Preset Auto-Cycle Modes |
| Safety Features | Thermal Cut-off, Emergency Stop, Overload Protection, Interlocked Lid Safety Switch |
| Standard Accessories | Dispensing Spoon ×1, Funnel ×1, 2 m Inlet/Outlet Hoses ×1 each, Mold Release Agent ×1, #240 Sanding Belt ×4, Belt Grinding Station ×1, Water Filter ×1, Heat-Resistant Gloves ×2, Top Mold Scraper ×1 |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNP-1020FRX |
| Dimensions (L×W×D) | 556 × 652 × 568 mm |
| Grinding/Polishing Plate Count | 1 |
| Plate Diameter | 200 mm |
| Plate Speed | 800 rpm |
| Construction | Cast Aluminum Base with FRP Enclosure |
| Cooling System | Stainless Steel–Ceramic Adjustable Spray Nozzle |
| Control Interface | Waterproof Membrane Keypad with 9-Step Parameter Memory |
| Water Pathway | Anti-Clogging Triangular Flow Design |
| Optional Accessory | Removable Stain-Resistant Liner |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNP-1020FRX-A3 |
| Dimensions (L×W×D) | 556 × 652 × 568 mm |
| Grinding/Polishing Disc Count | 1 |
| Disc Diameter | 200 mm |
| Disc Rotational Speed | 800 rpm |
| Enclosure Material | FRP (Fiberglass-Reinforced Polymer) |
| Water Delivery System | Stainless Steel–Ceramic Nozzle with Triangular Anti-Clogging Channel Design |
| Control Interface | Waterproof Membrane Keypad with 9-Step Programmable Presets (including disc speed, head speed, time, and coolant flow logic) |
| Base Construction | Precision-Cast Aluminum with Vibration-Damping Transmission Assembly |
| Optional Accessory | Removable Stain-Resistant Liner for Drain Spiral Groove |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNP-1025FRX |
| Dimensions (L×W×D) | 556 × 652 × 568 mm |
| Grinding Plate Count | 1 |
| Grinding Plate Diameter | 250 mm |
| Plate Speed | 800 rpm |
| Construction | Cast Aluminum Base with FRP Enclosure |
| Water Delivery System | Stainless Steel/Ceramic Nozzle with Triangular Anti-Clogging Water Path |
| Control Interface | Waterproof Membrane Keypad with 9-Step Program Memory |
| Optional | Removable Anti-Soil Liner |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNP-1025FRX-A3 |
| Dimensions (L×W×D) | 556 × 652 × 568 mm |
| Grinding Disc Count | 1 |
| Disc Diameter | 250 mm |
| Rotational Speed | 800 rpm |
| Construction | Cast Aluminum Base with FRP Enclosure |
| Cooling System | Stainless Steel–Ceramic Nozzle with Adjustable Flow & Angle |
| Control Interface | Waterproof Membrane Keypad with 9-Step Program Memory |
| Water Pathway | Anti-Clogging Triangular Flow Design |
| Optional Accessory | Removable Stain-Resistant Liner |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNP-2020FRX |
| Dimensions (L×W×D) | 796 × 727 × 568 mm |
| Number of Grinding/Polishing Discs | 2 |
| Disc Diameter | 200 mm |
| Rotational Speed | 800 rpm |
| Construction | Cast Aluminum Base with FRP Enclosure |
| Cooling System | Stainless Steel–Ceramic Adjustable Spray Nozzle |
| Control Interface | Waterproof Membrane Keypad with 9-Step Program Memory |
| Water Pathway Design | Anti-Clogging Triangular Flow Channel |
| Optional Accessory | Removable Stain-Resistant Liner |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNP-2025FRX |
| Dimensions (L×W×D) | 796 × 727 × 568 mm |
| Number of Grinding/Polishing Discs | 2 |
| Disc Diameter | 200 mm |
| Disc Speed | 800 rpm |
| Housing Material | FRP (Fiberglass-Reinforced Polymer) |
| Water Delivery System | Stainless Steel/Ceramic Nozzle with Triangular Anti-Clogging Channel Design |
| Control Interface | Waterproof Membrane Keypad with 9-Step Parameter Memory |
| Optional Accessory | Removable Stain-Resistant Liner |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNP-2025FRX-A3 |
| Dimensions (L×W×D) | 796 × 727 × 568 mm |
| Number of Grinding/Polishing Discs | 2 |
| Disc Diameter | 250 mm |
| Disc Rotational Speed | 800 rpm |
| Enclosure Material | FRP (Fiberglass-Reinforced Polymer) |
| Water Delivery System | Stainless Steel/Ceramic Nozzle with Triangular Anti-Clogging Channel Design |
| Control Interface | Waterproof Membrane Keypad with 9-Step Programmable Presets |
| Optional Accessory | Removable Stain-Resistant Liner for Drain Spiral Trough |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNP-2025FRX-AH03 |
| Dimensions (L×W×H) | 796×727×620 mm |
| Number of Grinding/Polishing Plates | 2 |
| Plate Diameter | 250 mm |
| Plate Speed | 0–1000 rpm |
| Applied Pressure Range | 0.3–4 kgf (adjustable with calibrated scale) |
| Sample Holder Capacity | Up to Ø50 mm standard |
| Water Delivery System | Stainless steel ceramic nozzle with optimized spray angle and flow rate |
| Control Interface | Waterproof membrane keypad with 9 programmable grinding-polishing protocols |
| Housing Material | FRP (Fiberglass-Reinforced Plastic), corrosion- and stain-resistant |
| Base Construction | Precision-cast aluminum with vibration-damping architecture |
| Quick-Change Plate System | Magnetic adapter-compatible cast-aluminum plate surface |
| Optional | Removable anti-fouling inner liner |