Chemical Analysis Instruments
Filter
Showing 1951–1980 of 4548 results
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | HG-01 |
| Pricing | Upon Request |
| Brand | Hiden |
|---|---|
| Origin | Austria |
| Model | HPR20 QIC TMS |
| Mass Range | 1–50 / 100 / 200 / 300 / 500 / 1000 amu |
| Sampling Pressure | 100 mbar–2 bar (standard) |
| Response Time | <150 ms |
| Dynamic Range | 7 decades (pulse-counting detector) |
| Detection Limit | 5 ppb |
| Quantification Range | ppm to 100% |
| Stability | ±0.5% peak height over 24 h |
| Scan Speed | 100 amu/s |
| Measurement Rate | 500 data points/sec |
| Capillary | 0.9 m heated quartz inert capillary (up to 200 °C) |
| Ionization | APSI-MS soft ionization |
| External Analog Outputs | 2 standard, up to 16 optional |
| Brand | Hiden |
|---|---|
| Origin | United Kingdom |
| Model | SIMS Workstation |
| Mass Analyzer Type | Quadrupole |
| Primary Beam Energy | 25 keV Ga⁺ |
| Mass Range | 1000 amu |
| Mass Resolution | 0.5 amu (5% valley between adjacent equal-height peaks) |
| Detection Mode | Pulsed Ion Counting (positive/negative ions) |
| Dynamic Range | 7 decades |
| Spatial Resolution | 50 nm (Ga⁺ beam), 100–150 µm (O₂⁺/Cs⁺ beams) |
| Vacuum System | UHV-compatible, three-stage differential pumping |
| Control Interface | Ethernet LAN, RS232, RS485 |
| Software | MASsoft v6.x (GLP-compliant audit trail, method templating, automated sequence execution) |
| Brand | AIWEI |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HT-PEMST |
| Instrument Type | Electrochemical Workstation |
| Channel Count | Single-Channel |
| Current Range | 0–600 A |
| Power Rating | 2.5 kW (Electronic Load Module) |
| Voltage Range | 0–120 V |
| Gas Flow Control | Anode (H₂/N₂, up to 20 SLPM) |
| Temperature Control | Liquid-Cooled Thermal Loop with 30 L Reservoir |
| Backpressure Control | 0–3.5 bar |
| Preheater | SUS Tubing (Anode: 1/4″, Cathode: 3/8″) |
| Humidification | Integrated Condensate Trap with Auto-Drain, Radiant Heating & Cooling Fan |
| Software Platform | LabVIEW-Based Control Suite with Real-Time DAQ, Protocol Automation, Load Profiling, and Optional EIS Module (10 mHz–10 kHz), HFR/IR Drop Analysis, and Cell-Voltage Monitoring (±5 V per cell, selectable channels) |
| Brand | Hiperscan |
|---|---|
| Origin | Germany |
| Model | Apo-Ident |
| Wavelength Range | 1000–1900 nm |
| Wavelength Resolution | 10 nm |
| Wavelength Stability | ±1 nm |
| Measurement Time | <15 s |
| Operating Temperature | 15–35 °C |
| Dimensions | 203 × 279 × 219 mm |
| Weight | 5.2 kg |
| Power Supply | 230 V~, 50/60 Hz, 60 W |
| Interface | USB Type-B |
| Software | QuickStep Apo-Ident |
| OS Compatibility | Windows Vista/7/8/10 (excluding Starter editions), Linux, macOS |
| Minimum System Requirements | 1 GB RAM, Pentium 1.6 GHz CPU, 0.5 GB disk space |
| Brand | HiperScan |
|---|---|
| Origin | Germany |
| Model | Finder SD |
| Spectral Range | 1000–1900 nm |
| Spectral Resolution | 10 nm |
| Stray Light | ≤0.20% |
| Measurement Time | <5 s (average of ≥500 scans), configurable from 1–15 s |
| Detector | Single-element uncooled InGaAs |
| Wavelength Accuracy | ±0.5 nm |
| Wavelength Repeatability | ±0.2 nm |
| Photometric Reproducibility | ±0.1% |
| SNR | >2000:1 (≥2000 scans), >1000:1 (≥500 scans) |
| Photometric Linearity (max/RMS) | ≤1% / <1% |
| Light Source | Tungsten-halogen lamp |
| Sampling Interface | Diffuse reflectance probe (23 mm aperture) |
| Thermal Stability | Yes |
| Dimensions (W×D×H) | 225 × 235 × 385 mm |
| Weight | 9 kg |
| Interface | USB Type-B (with optional auxiliary I/O for motor control or sensor input) |
| Operating Temperature | 15–35 °C (Type 55) or 5–30 °C (Type 50) |
| Storage Temperature | −20 to +60 °C (non-condensing) |
| IP Rating | IP65 |
| Power Supply | 100–240 VAC ±10%, 50–60 Hz |
| Power Consumption | 78 W (warm-up), 36 W (operation), 5 W (standby) |
| Brand | China Innovation Instrument |
|---|---|
| Origin | Zhejiang, China |
| Model | HIT-2210 |
| Ionization Mode | Dual-mode (Direct Ambient Ionization + LC-MS Coupling) |
| Detection Principle | Atmospheric Pressure Ionization Mass Spectrometry |
| Intended Use | Qualitative Identification, Semi-Quantitative & Quantitative Analysis |
| Regulatory Context | Designed for GLP-compliant laboratories and academic research environments |
| Brand | Hitachi |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Steady-State Fluorescence Spectrometer |
| Wavelength Scanning Speed | Up to 60,000 nm/min |
| Slit Width (Spectral Bandpass) | 1–20 nm |
| Excitation Source | Xenon Arc Lamp |
| Monochromator Type | Dual Grating |
| Detection Mode | Photon Counting with PMT |
| Dimensions & Weight | Approx. 2/3 volume and 30% less mass vs. F-4500 model |
| Software Compliance | FDA 21 CFR Part 11 (Audit Trail, Electronic Signature, User Access Control) |
| Linear Dynamic Range | 6 decades for calibration curve generation |
| Phosphorescence Measurement Capability | Extended time-gated detection up to seconds scale |
| Optional Module Support | Report Generator, Temperature-Controlled Cell Holder, Polarization Accessories, Microvolume Adapters |
| Brand | Hitachi |
|---|---|
| Origin | Japan |
| Manufacturer | Hitachi High-Tech Corporation |
| Instrument Type | Post-Column Derivatization Amino Acid Analyzer |
| Model | LA8080 |
| Pump Flow Rate | 0.000–1.000 mL/min |
| Maximum Pump Pressure | 34 MPa |
| Autosampler Injection Volume | 0–100 µL |
| Autosampler Temperature Control | 4 °C and 10 °C |
| Post-Column Reactor Temperature Range | 50–140 °C |
| Detection Wavelengths | 570 nm and 440 nm |
| Flow Cell Volume | 8 µL |
| Brand | HiTech |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | HT-1010 |
| Instrument Type | Post-Column Derivatization System |
| Pump Flow Rate | 0.000–9.999 mL/min |
| Maximum Pump Pressure | 40 MPa |
| Autosampler Injection Volume | 0–100 µL |
| Autosampler Temperature Control | 4–25 °C (optional) |
| Post-Column Reactor Temperature Range | Ambient to 150 °C |
| Detection Wavelengths | 570 nm and 440 nm |
| Flow Cell Volume | 8 µL |
| Brand | HMC |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | L-3000 |
| Instrument Type | Post-Column Derivatization System |
| Pump Flow Rate | 0.001–10.000 mL/min |
| Maximum Pump Pressure | 6000 psi |
| Autosampler Injection Volume | 1–500 µL |
| Autosampler Temperature Control | +5 °C (±1 °C) to 70 °C |
| Post-Column Reactor Temperature Range | Ambient to 150 °C |
| Detector Wavelength Range | 190–800 nm |
| Flow Cell Volume | 8 µL |
| Brand | HMC |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | L-3000plus |
| Instrument Type | Post-Column Derivatization System |
| Pump Flow Rate | 0.01–9.99 mL/min |
| Maximum Pump Pressure | 6000 psi (41.4 MPa) |
| Autosampler Injection Volume | 1–500 µL |
| Autosampler Temperature Control | +5 °C (±1 °C) to 70 °C |
| Post-Column Reactor Temperature Range | Ambient to 150 °C |
| Detection Wavelength Range | 190–800 nm |
| Flow Cell Volume | 8 µL |
| Brand | HMC |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Model | L-3000pro |
| Instrument Type | Post-Column Derivatization System |
| Pump Flow Rate | 0.001–10.000 mL/min |
| Maximum Pump Pressure | 6000 psi |
| Autosampler Injection Volume | 1–500 µL |
| Post-Column Reactor Temperature Range | Ambient to 150 °C |
| Detection Wavelength Range | 190–800 nm |
| Flow Cell Volume | 4 µL |
| Brand | HMC |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PHRED |
| Price Range | USD 1,400–2,800 (FOB) |
| Operating Temperature | Ambient |
| Derivatization Flow Rate | 0.3 mL/min |
| Reaction Capillary ID | 0.25 mm |
| Dimensions (L×W×H) | 330 × 50 × 70 mm |
| Power Supply | 220 V / 50 Hz |
| Power Consumption | 8 W |
| Capillary Material | PTFE |
| Maximum Pressure Rating | 500 psi (35 bar) |
| Weight | ~4 kg |
| Regulatory Compliance | AOAC 2005.08, AOAC 2008.02, AOAC Aa 11-05, Taiwan Food Agency Notice No. 0981800370, Ph. Eur. 2.8.18, GB/T 18979–2003, SN/T 1109–2002 |
| Brand | HOGON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yes |
| Type | Domestic |
| Model | AKF-CH6 |
| Price | USD 9,500 (approx.) |
| Brand | HOGON |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Method | Coulometric Titration (Karl Fischer) |
| Detection Principle | Electrochemical generation of iodine via constant-current electrolysis |
| Detection Range | 1 µg – 200 mg H₂O |
| Resolution | 0.1 µg |
| Accuracy | ±2 µg (for <100 µg), ±0.2% (for >100 µg) |
| Sample Introduction | Heated oven coupling with carrier gas (N₂ or dry air) |
| Temperature Control | 50–300 °C (adjustable in 1 °C increments) |
| Electrolytic Cell | Dual-platinum electrode, sealed glass cell with molecular sieve drying tube |
| Compliance | ASTM E203, ISO 760, ISO 15512, USP <921>, EP 2.5.12, GLP-compliant data integrity features |
| Brand | HOGON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | AKF-V6 |
| Pricing | USD 6,800 (FOB Shanghai) |
| Titration Mode | Fully Automated Volumetric Titration |
| Instrument Type | Dual-Mode Karl Fischer Analyzer (Volumetric & Coulometric Capable via Optional Module) |
| Measurement Resolution | 0.1 ppm |
| Water Content Range | 10 ppm – 100% (0.001% – 100% H₂O) |
| Accuracy | RSD ≤ 0.3% (at 1500 µL reagent consumption) |
| Minimum Dispensing Volume | 0.5 µL (with 20 mL burette) |
| Repeatability | ≤ 0.3% RSD |
| Linearity Correlation Coefficient | ≥ 0.999 |
| Polarization Voltage Adjustment Range | 0–120 mV |
| Burette Options | 20 mL / 10 mL |
| Titration Control Precision | ±0.5 µL (20 mL burette) |
| Power Supply | 110–240 V AC, 50–65 Hz |
| Data Storage Capacity | 200 test records (expandable via USB export) |
| Brand | HOGON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic (China) |
| Model | AKF-V6 Povidone K30-Specific |
| Pricing | Upon Request |
| Brand | HOGON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AT-1 Advanced |
| Instrument Type | General-purpose Potentiometric Titrator |
| Application Scope | Universal |
| Measurement Range | mV: −2000 to +2000 mV |
| pH | 0.000–14.000 |
| Temperature | −55 to +125 °C |
| Meter Accuracy | ±0.5% of full scale |
| Meter Resolution | 0.1 mV |
| Titration Precision | 0.8 mV/h |
| Input Impedance | >1 × 10¹² Ω |
| Bias Current | <1 × 10⁻¹² A |
| Titration Volume Resolution | 1 µL (with 20 mL burette) |
| Electrode Interfaces | Composite, Reference, Indicator, and Temperature Electrode Ports |
| GLP Compliance | User authentication, audit trail, electrode & titrant logging, PDF report export, method versioning |
| Brand | HOGON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | MT-V6 Redox |
| Instrument Type | General-Purpose Potentiometric Titrator |
| Application Scope | Universal |
| pH Measurement Range | 0.000–14.000, Resolution: 0.001 pH |
| Meter Accuracy | ±0.1 mV |
| Meter Resolution | 0.1 mV |
| Burette Precision | 20 mL standard burette / 1 µL, 10 mL optional burette / 0.5 µL |
| Potential Range | ±2000 mV, Resolution: 0.1 mV |
| Brand | Hongtu |
|---|---|
| Origin | Shandong, China |
| Model | SP-6802 |
| Detection Limit (as S in H₂S) | 0.01 mg/m³ (Type A, non-conversion) |
| Measurement Range (as S in H₂S, undiluted) | 0.01–50 mg/m³ (extendable to 0.1–500 mg/m³) |
| Repeatability (RMS error) | <5% (n ≥10, certified H₂S standard gas or CS₂ permeation source) |
| Column Temperature Control | Ambient to 100°C ±0.2°C |
| Permeation Source Temperature Control | Ambient to 50°C ±0.1°C |
| Detector Temperature Control | Ambient to 110°C ±1°C |
| Converter Furnace Temperature | Ambient to 900°C ±5°C |
| High-Voltage Power Supply | –400 V to –800 V adjustable |
| Compliance | GB/T 19001–2016 (ISO 9001), GB/T 14001–2016 (ISO 14001) |
| Brand | Hongweiliangzi |
|---|---|
| Origin | Shandong, China |
| Model | HW-DYS2 |
| Measurement Channels | 6 |
| Sample Throughput | 20 consecutive samples |
| Analysis Time per Sample (8 elements) | ≤5 min |
| Stability | ±1 digit within 5 min |
| Compliance Standards | GB/T 4734, GB/T 6900, QB/T 2578–2002 |
| Operating Temperature | 10–30 °C |
| Relative Humidity | ≤85% |
| Power Supply | 220 V, 50/60 Hz |
| Power Consumption | 1 kW |
| Dimensions (Instrument) | 500 × 460 × 350 mm |
| Weight (Instrument + Packaging) | 15 kg |
| Brand | Horde Electric |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Flame AAS |
| Model | HD-AAS4H |
| Wavelength Range | 185–900 nm |
| Monochromator | Czerny-Turner enhanced optical system |
| Grating Density | 1800 lines/mm |
| Spectral Bandwidth | 0.2 / 0.4 / 1.0 / 2.0 nm (auto-switchable) |
| Wavelength Accuracy | ≤ ±0.1 nm |
| Wavelength Repeatability | ≤ ±0.025 nm |
| Resolution | 0.2 nm (Cu 324.7 nm, 0.2 nm bandwidth) |
| Baseline Drift | 0.003 ABS/30 min (static), 0.005 ABS/15 min (dynamic) |
| Detector | Hamamatsu photomultiplier tube |
| Background Correction | Deuterium lamp |
| Characteristic Concentration (Cu) | 0.025 µg/mL/1% |
| Detection Limit (Cu) | 0.006 µg/mL |
| Precision (RSD) | ≤ 0.5% |
| Atomizer | Titanium 0.5 mm × 100 mm burner head |
| Nebulizer | High-efficiency glass nebulizer with metal cap |
| Spray Chamber | Corrosion-resistant all-plastic chamber |
| Safety System | Real-time acetylene leak detection, flame-out monitoring, gas pressure interlock, automatic shutdown |
| Lamp System | Motorized turret for 4/6/8 lamp positions |
| Data Interface | RS232, USB |
| Software | Windows-compatible AAS control suite with dual-language UI (EN/CN), remote calibration support, GLP-compliant audit trail, multi-format export (CSV, PDF, Excel) |
| Brand | Horde Electric |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Instrument Type | Benchtop |
| Excitation Method | Spark Discharge |
| Detector Type | CCD-based Multi-Channel Array |
| Focal Length | 400 mm |
| Grating Groove Density | 2700 lines/mm |
| Wavelength Range | 120–800 nm |
| Analog-to-Digital Resolution | 16-bit per pixel |
| Optical Architecture | Paschen-Runge Mount with Rowland Circle Design |
| Vacuum System | Intermittent Vacuum Maintenance |
| Compliance | ASTM E415, ISO 11573, GB/T 4336 (Chinese National Standard for Spark OES) |
| Brand | HORIBA |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Aqualog® |
| Dispersion Element | Grating |
| Slit Width (Spectral Bandpass) | 5 nm |
| Optical Resolution | 0.58 nm |
| Sensitivity | 20,000:1 (SNR, RMS, water Raman at 350 nm excitation, 30 s integration) |
| Wavelength Accuracy | ±1.0 nm |
| Brand | HORIBA |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | DeltaFlex |
| Dispersion Element | Grating |
| Slit Width (Spectral Bandpass) | Adjustable from 1 to 64 nm |
| Optical Resolution | 1 nm |
| Detection Sensitivity | Single-Photon Counting |
| Wavelength Accuracy | ±1 nm |
| Brand | HORIBA |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | DeltaPro |
| Dispersion Element | Grating |
| Slit Width / Spectral Bandpass | Not Specified |
| Resolution | Not Specified |
| Sensitivity | Not Specified |
| Wavelength Accuracy | Not Specified |
| Brand | HORIBA |
|---|---|
| Origin | USA |
| Model | Duetta |
| Wavelength Range (Fluorescence) | 250–1100 nm |
| Spectral Bandwidth (Slit) | 1–20 nm |
| Optical Resolution | 1 nm |
| Sensitivity (Water Raman RMS) | 6000:1 |
| Wavelength Accuracy | ±1 nm |
| Dispersion Element | Grating |
| Detector | CCD |
| Measurement Modes | Simultaneous Fluorescence & Absorbance |
| A-TEEM™ Capability | Yes |
| Auto Inner-Filter Correction | Yes |
| Brand | HORIBA |
|---|---|
| Origin | Canada |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Duetta |
| Wavelength Range (Fluorescence) | 250–1100 nm |
| Detection Technology | Back-Illuminated CCD |
| Sensitivity (Water Raman S/N) | >6000:1 |
| Dispersion Element | Holographic Grating |
| Slit Width / Spectral Bandpass | Variable, software-controlled |
| Wavelength Accuracy | ±0.5 nm |
| Internal Correction | Automated primary and secondary inner-filter effect compensation |
| Core Technology | A-TEEM™ (Absorbance-Transmitted Excitation-Emission Matrix) |
| Brand | HORIBA |
|---|---|
| Origin | Imported |
| Manufacturer | HORIBA, Ltd. |
| Model | EMGA-Expert |
| Detection Principle | Pulse Heating Extraction + NDIR (CO/CO₂, H₂O) & TCD (N₂) |
| Gas Detection Methods | Non-Dispersive Infrared (NDIR) for O and H |
| Automation Options | Auto-Sampler, Auto-Crucible Loader, Auto-Electrode Cleaner, Halogen Trap |
| Compliance Support | ASTM E1019, ISO 14284, ISO 22356, JIS G 1257, USP <233>, FDA 21 CFR Part 11 (audit trail enabled), GLP/GMP-ready software architecture |