Common Laboratory Equipment
Filter
Showing 661–690 of 4952 results
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-20L2 |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 20 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99% |
| Dew Point | Not specified in source data |
| Power Consumption | 2600 W |
| Input Voltage | 380 V AC |
| Dimensions (W×D×H) | 400 × 300 × 1300 mm |
| Filtration Stages | Three-stage |
| Particle Removal Efficiency | <0.01 µm |
| Oil & Moisture Content | ≤0.003 mg/m³ |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Model | AYAN-20L |
| Nitrogen Generation Principle | Hollow-Fiber Membrane Separation |
| Output Flow Rate | 20 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99% (v/v) |
| Dew Point | ≤ −40 °C (typical, dependent on inlet air quality and ambient conditions) |
| Power Supply | 220 V AC, 50 Hz |
| Air Inlet Requirement | Oil-free, dried compressed air (dew point ≤ −20 °C recommended) |
| Dimensions (W×D×H) | 600 × 500 × 1,200 mm |
| Weight | ~85 kg |
| Brand | Anyan (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Model | AYAN-20L3 |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 0–20 L/min |
| Output Pressure | 0–0.4 MPa |
| Nitrogen Purity | 99% |
| Dew Point | −40 °C |
| Integrated Air Compressor | Yes |
| Filtration Stages | Three-stage (Particulate < 0.01 µm, Oil & Moisture < 0.003 mg/m³) |
| Real-time Purity Display | Yes |
| Noise Reduction | Suspended Vibration-Isolation Mounting |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-20LG |
| Nitrogen Generation Principle | Polymeric Membrane Separation |
| Output Flow Rate | 20 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | ≤ −40 °C (typical for membrane systems with integrated desiccant pre-filtration) |
| Power Consumption | 2600 W |
| Input Voltage | 380 V AC |
| Dimensions (W×D×H) | 400 × 300 × 1300 mm |
| Filtration Stages | Three-stage (particulate < 0.01 µm, oil aerosol < 0.003 mg/m³) |
| Internal Air Compressor | Yes |
| Noise Level | ≤ 62 dB(A) |
| Start-up Time | ≤ 3 min |
| Display | Real-time nitrogen purity indicator |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-25K |
| Instrument Type | Vacuum Parallel Concentrator |
| Temperature Range | Ambient to 100 °C |
| Temperature Control Accuracy | ±1 °C |
| Oscillation Speed | 0–300 rpm |
| Sample Capacity | 25 positions (150–200 mL vials) |
| Timer Range | 0–999 min |
| Heating Method | Water Bath |
| Included Systems | Integrated Vacuum Pump, Dual-Tower Condensation Module, Closed-Loop Water Circulation Chiller |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-25LG |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 25 L/min |
| Output Pressure Range | 0–0.4 MPa |
| Nitrogen Purity | 99% |
| Dew Point | −40 °C |
| Integrated Air Compressor | Yes |
| Filtration Grade | 0.01 µm particles, 0.003 mg/m³ oil aerosol |
| Onboard Purity Monitoring | Yes |
| Noise Level | <60 dB(A) |
| Startup Time | ≤3 min |
| Compliance Reference | HJL Standard “Energy-Saving Carbon Molecular Sieve Nitrogen Generator” |
| Operating Ambient | −10 to 45 °C, 35–90% RH |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-3000YL |
| Max Feed Rate | 3000 mL/h |
| Inlet Temperature Range | Ambient to 250 °C (electric heating) |
| Outlet Temperature Control | PID-regulated, ±1 °C accuracy |
| 雾化方� | �: Two-fluid pneumatic nozzle (optional centrifugal atomizer) |
| Drying Chamber Diameter | 600 mm |
| Airflow | 240 m³/h |
| Heating Power | 7 kW |
| Total Power Consumption | 10 kW |
| Construction Material | 304 stainless steel (wetted parts) |
| Noise Level | <60 dB(A) |
| Integrated Oil-Free Compressor | Yes |
| Touchscreen Interface | 7-inch color LCD, bilingual (English/Chinese) |
| Safety Features | Leakage protection, voltage stabilization, thermal insulation, inlet air filtration, automatic nozzle cleaning (needle-type unclogging system) |
| Optional Accessories | Magnetic stirrer, peristaltic feed pump (adjustable), water-cooled atomizer head |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Category | Domestic |
| Model | AYAN-300LB |
| Instrument Type | Nitrogen Generator |
| Nitrogen Production Principle | Dual-Tower Parallel Pressure Swing Adsorption (PSA) |
| Nitrogen Purity | 99.0%–99.999% |
| Dew Point | −40 °C |
| Output Flow | Up to 300 L/min (configurable per purity grade) |
| Output Pressure | 0–0.7 MPa |
| Noise Level | ≤65 dB(A) |
| Power Supply | 380 V ±10%, 50 Hz ±5% |
| Rated Power | 4.5 kW |
| Ambient Temperature Range | −10 °C to 40 °C |
| Relative Humidity | ≤85% RH (non-condensing) |
| Dimensions (W×D×H) | 1400 × 950 × 1300 mm |
| Weight | 380 kg |
| Integrated Components | Oil-free air compressor, refrigerated air dryer, multi-stage particulate & coalescing filters, carbon-based oil scavenger, nitrogen purity analyzer, mass flow meter, air receiver tank, nitrogen buffer tank |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-300ML |
| Output Flow Rate | 300 mL/min |
| Output Pressure | 0–0.4 MPa |
| Nitrogen Purity | >99.999% |
| Dew Point | −45 °C |
| Power Consumption | 150 W |
| Input Power | AC 230 V, 50/60 Hz |
| Dimensions (L×W×H) | 400 × 250 × 350 mm |
| Operating Temperature | 10–40 °C |
| Relative Humidity | <85% RH (non-condensing) |
| Feed Air Requirement | Clean, oil-free, dried compressed air or ambient air with ≥1 MΩ·cm resistivity water for integrated humidification (if equipped) |
| Output Port | 3 mm OD tubing or 1/8″ NPT (M8×1 external thread) |
| Brand | ANYAN |
|---|---|
| Origin | Shanghai, China |
| Model | AYAN-300ML |
| Nitrogen Generation Principle | Hollow-Fiber Membrane Separation |
| Output Flow Rate | 500 mL/min |
| Output Pressure Range | 0–0.4 MPa |
| Nitrogen Purity | >99.999% (v/v) |
| Dew Point | –40 °C to –60 °C (at 0.1 MPa, typical for membrane systems) |
| Power Consumption | ≤150 W |
| Pressure Stability | <±0.2% FS |
| Output Interface | 3 mm OD tubing or 1/8" NPT (M8×1 external thread) |
| Water Consumption | ~10 mL/h |
| Feed Air Requirement | Oil-free, particle-filtered compressed air (ISO 8573-1 Class 1.2.1 recommended) |
| Power Supply | AC 230 V, 50/60 Hz, 2 A fuse |
| Operating Environment | 10–40 °C, RH <85%, non-condensing, low-dust |
| Dimensions (L×W×H) | 400 × 250 × 350 mm |
| Weight | ~18 kg |
| Compliance | CE-marked per Machinery Directive 2006/42/EC and EMC Directive 2014/30/EU |
| Software Interface | None (standalone analog control) |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-300MLG |
| Nitrogen Generation Principle | Electrolytic Separation |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0–0.4 MPa |
| Nitrogen Purity | 99.997% |
| Dew Point | −40 °C |
| Power Consumption | 150 W |
| Input Water Conductivity | ≥1 MΩ·cm (Resistivity) |
| Dimensions (L×W×H) | 400 × 250 × 350 mm |
| Weight | Approx. 18 kg |
| Operating Temperature | 10–40 °C |
| Relative Humidity | <85% RH (non-condensing) |
| Output Port | 3 mm OD tubing or 1/8″ male NPT (M8×1 external thread) |
| Integrated Buffer Tank | Yes |
| Safety Valve | ISO-compliant pressure relief device |
| Mobility | Equipped with locking casters |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-30L Membrane Nitrogen Generator |
| Nitrogen Generation Principle | Hollow-Fiber Membrane Separation |
| Output Flow Rate | 30 L/min |
| Output Pressure | 0.3 MPa |
| Nitrogen Purity | 99–99.9% |
| Dew Point | −40 °C |
| Filtration | Triple-Stage (Particulates < 0.01 µm |
| Power Consumption | 3200 W |
| Input Voltage | 380 V AC |
| Dimensions | 400 × 300 × 1300 mm |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-30L |
| Nitrogen Generation Principle | Polymeric Membrane Separation |
| Output Flow Rate | 30 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99% |
| Dew Point | –40 °C (typical, as per standard membrane module specification) |
| Integrated Air Compressor | Yes |
| Filtration Stages | 3-stage (particulate < 0.01 µm, oil aerosol < 0.003 mg/m³) |
| Power Supply | 380 V AC |
| Total Power Consumption | 3200 W |
| Dimensions (W×D×H) | 400 × 300 × 1300 mm |
| Noise Level | ≤62 dB(A) |
| Startup Time | ≤3 min |
| Compliance | CE-marked design |
| compatible with ISO 8573-1 Class 2 | 2:2 air quality requirements for nitrogen feed gas |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Model | AYAN-30LB |
| Nitrogen Purity | 99.999% |
| Output Flow Rate | 100 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Dew Point | −40 °C |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) with Carbon Molecular Sieve (CMS) |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-30LB |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) using Carbon Molecular Sieve (CMS) |
| Output Flow Rate | 0–30 L/min |
| Output Pressure | 0–0.6 MPa (factory-set at 0.5 MPa) |
| Nitrogen Purity | 99% (selectable up to 99.9999%) |
| Oxygen Content | ≤0.01% |
| Dew Point | −40 °C |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Power Consumption | 3500 W |
| Noise Level | ≤65 dB(A) |
| Ambient Operating Conditions | 10–40 °C, RH ≤85%, non-corrosive, low-dust environment |
| Dimensions (W×D×H) | 1400 × 1100 × 1400 mm |
| Weight | 260 kg |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-30LG |
| Output Flow Rate | 30 L/min |
| Output Pressure | 0–0.6 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | ≤ −40 °C (typical for membrane systems) |
| Separation Principle | Polymeric Membrane Gas Separation |
| Integrated Air Compressor | Yes |
| Filtration Stages | Three-Stage (Particulate < 0.01 µm, Oil & Water < 0.003 mg/m³) |
| Noise Level | ≤ 62 dB(A) |
| Power Supply | 380 V AC |
| Dimensions (W×D×H) | 400 × 300 × 1300 mm |
| Total Power Consumption | 3200 W |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Category | Domestic |
| Model | AYAN-35L1 |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 35 L/min |
| Output Pressure | 0–105 psi (adjustable) |
| Nitrogen Purity | 99.9% |
| Dew Point | −40 °C |
| Filtration | Three-stage filtration (particulates < 0.01 µm |
| Integrated Air Compressor | Yes |
| Noise Level | ≤55 dB(A) |
| Startup Time | ≤3 min |
| Display | Real-time nitrogen purity and pressure readout |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-35L1 |
| Nitrogen Generation Principle | Membrane Separation Technology |
| Output Flow Rate | Not specified in source data |
| Output Pressure | Not specified in source data |
| Nitrogen Purity | 99–99.9% |
| Dew Point | –40 °C |
| Integrated Air Compressor | Yes |
| Noise Reduction | Suspended Acoustic Isolation System |
| Pressure Regulation | Dual-Stage Adjustable |
| Structural Design | All-in-One Modular Integration (Compressor + Pre-Filtration + Membrane Separation + Drying + Buffer Tank) |
| Safety Features | Built-in Pressure Vessel with ASME/ISO-Compliant Safety Valve |
| Mobility | Castor-Mounted Chassis |
| Monitoring | Real-Time Nitrogen Purity Display |
| Maintenance Alerts | Filter Failure Warning System |
| Compliance Context | Designed to support GLP/GMP-compliant LC-MS laboratories requiring continuous, traceable, and auditable nitrogen supply per FDA 21 CFR Part 11 and ISO/IEC 17025 operational expectations |
| [Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-35L1 |
| Nitrogen Generation Principle | Membrane Separation |
| Nitrogen Purity | 99.0–99.9% |
| Dew Point | -40°C |
| Output Flow Rate | Configurable per system demand (standard range: 0–35 L/min) |
| Output Pressure | Adjustable, up to 0.7 MPa (g) |
| Integrated Air Compressor | Yes |
| Noise Level | ≤55 dB(A) |
| Safety Compliance | Integrated pressure relief valve per ISO 4414 |
| Design | All-in-one modular architecture with built-in air drying, filtration, and nitrogen stabilization] |
| Brand | Anyan Instruments (Hangzhou) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Region Classification | Domestic (China) |
| Model | AYAN-40L1 |
| Price Range | USD 4,300 – 6,400 (FOB) |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) |
| Output Flow Rate | 40 L/min |
| Output Pressure | 0–0.6 MPa |
| Nitrogen Purity | 99.9% (v/v) |
| Dew Point | −40 °C |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-40LB |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) using Carbon Molecular Sieve (CMS) |
| Output Flow Rate | 40 L/min |
| Output Pressure | 0–0.6 MPa (factory-set at 0.5 MPa) |
| Nitrogen Purity | 99% |
| Dew Point | −40 °C |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Power Consumption | 2800 W |
| Noise Level | ≤65 dB(A) |
| Ambient Temperature Range | 10–40 °C |
| Relative Humidity | ≤85% RH (non-condensing) |
| Dimensions (W×D×H) | 1200 × 900 × 1400 mm |
| Weight | 180 kg |
| Air Intake Requirement | Integrated oil-lubricated air compressor, refrigerated dryer, and multi-stage filtration system (coalescing, activated carbon, ultra-fine) |
| Onboard Monitoring | Real-time nitrogen purity analyzer (electrochemical O₂ sensor), digital flow meter, pressure gauges on inlet, adsorption tower, and output lines |
| Structural Features | Castor-mounted chassis with locking brakes, integrated nitrogen buffer tank, CMS bed stabilization mechanism (pneumatic cylinder-based compaction), dual-tower PSA architecture with automatic valve sequencing |
| Brand | ANYAN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-500ML |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 500 mL/min |
| Output Pressure Range | 0–0.4 MPa |
| Nitrogen Purity | >99.999% |
| Dew Point | ≤−40 °C (at 0.4 MPa) |
| Pressure Stability | <±0.2% FS |
| Max Power Consumption | 150 W |
| Output Port | 3 mm OD tubing or 1/8" NPT (M8×1 external thread) |
| Water Reservoir Capacity | 1.2 L |
| Water Consumption | ~10 mL/h |
| Feed Water Resistivity Requirement | ≥1 MΩ·cm |
| Input Voltage | AC 230 V, 50/60 Hz |
| Fuse Rating | 250 V / 2 A |
| Operating Ambient | 10–40 °C, RH <85%, non-dusty environment |
| Dimensions (L×W×H) | 400 × 250 × 350 mm |
| Duty Cycle | Continuous operation |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-50LB |
| Nitrogen Production Principle | Pressure Swing Adsorption (PSA) with Carbon Molecular Sieve (CMS) |
| Output Flow Rate | 50 L/min |
| Output Pressure | 0–0.6 MPa (Factory Set at 0.5 MPa) |
| Nitrogen Purity | 99% |
| Dew Point | −40 °C |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Power Consumption | 3200 W |
| Noise Level | ≤65 dB(A) |
| Ambient Operating Conditions | 10–40 °C, RH ≤85%, non-corrosive, low-dust environment |
| Dimensions (W×D×H) | 1200 × 900 × 1400 mm |
| Weight | 220 kg |
| Compliance | Designed per ISO 8573-1:2010 Class 2.2.2 for compressed air quality |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-50LB PSA Nitrogen Generator |
| Nitrogen Production Principle | Pressure Swing Adsorption (PSA) |
| Output Flow Rate | 50 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99% |
| Dew Point | −40 °C |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-5L |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 5 L/min |
| Output Pressure | 0–0.6 MPa |
| Nitrogen Purity | 99% |
| Dew Point | −40 °C |
| Integrated Air Compressor | Yes |
| Filtration Stages | Three-stage |
| Particle Removal Efficiency | <0.01 µm & <0.003 mg/m³ |
| Power Consumption | 1000 W |
| Voltage | 220 V, 50 Hz |
| Dimensions (W×D×H) | 500 × 330 × 710 mm |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Category | Domestic Lab Equipment |
| Model | AYAN-5L |
| Pricing | ¥25,000 (excl. VAT) |
| Nitrogen Generation Principle | Polymeric Membrane Separation |
| Output Flow Rate | 5 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99% |
| Dew Point | Not specified in source data |
| Power Consumption | 1000 W |
| Input Voltage | 220 V, 50 Hz |
| Dimensions (W×D×H) | 500 × 330 × 710 mm |
| Filtration Stages | Triple-stage (particulate <0.01 µm, oil aerosol <0.003 mg/m³) |
| Integrated Air Compressor | Yes |
| Noise Level | Reduced via suspended acoustic isolation mount |
| Pressure Regulation | Dual independent pressure adjustment system |
| Display | Real-time nitrogen purity indication |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Category | Domestic Equipment |
| Model | AYAN-5LG |
| Nitrogen Generation Principle | Hollow-Fiber Membrane Separation |
| Output Flow Rate | 5 L/min |
| Output Pressure | 0–0.6 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | −45 °C |
| Filtration Stages | Three-Stage Integrated Air Purification |
| Power Consumption | 1000 W |
| Input Voltage | 220 V, 50 Hz |
| Dimensions (W×D×H) | 500 × 330 × 710 mm |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-5LG Membrane |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 5 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | −40 °C |
| Integrated Air Compressor | Yes |
| Filtration Stages | Three-Stage (Particulate < 0.01 µm, Oil & Water < 0.003 mg/m³) |
| Power Consumption | 1000 W |
| Voltage | 220 V, 50 Hz |
| Dimensions (W×D×H) | 500 × 330 × 710 mm |
| Noise Level | ≤55 dB(A) |
| Startup Time | ≤3 min |
| Display | Real-Time Purity Monitoring (Digital LED) |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-5LG |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 5 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | −40 °C |
| Integrated Air Compressor | Yes |
| Filtration Stages | Three-Stage |
| Particle Removal Efficiency | <0.01 µm |
| Oil & Aerosol Removal | <0.003 mg/m³ |
| Power Consumption | 1000 W |
| Voltage | 220 V, 50 Hz |
| Dimensions | 500 × 330 × 710 mm |
| Brand | Anyan (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | AYAN-60L1 |
| Nitrogen Generation Principle | Polymeric Membrane Separation |
| Output Flow Rate | 60 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99% |
| Dew Point | Not Specified |
| Filtration Grade | 0.01 µm particulate removal & 0.003 mg/m³ oil/water aerosol retention |
| Integrated Air Compressor | Yes |
| Noise Level | Low (acoustic isolation suspension system) |
| Pressure Regulation | Dual-stage adjustable |
| Real-time Purity Monitoring | Yes |
| Desiccant Pre-treatment | Integrated coalescing + refrigerated dryer + adsorption-type water separator |
| Filter Stages | Three-stage independent filtration |