Common Laboratory Equipment
Filter
Showing 7741–7770 of 18046 results
| Brand | Innoteg |
|---|---|
| Origin | Germany |
| Model | MR5 |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 20 L |
| Speed Range | 50–1500 rpm |
| Temperature Control Range | Ambient to 310 °C |
| Heating Power | 800 W |
| Plate Material | Enamel-coated Aluminum Alloy |
| External Temperature Sensor Compatibility | PT1000, ETS-D5, ETS-D6 |
| Safety Temperature Limit Adjustable | 50–370 °C |
| Operating Modes | 3 Safety-Configurable Modes |
| Stirring Direction | Clockwise/Counterclockwise Selectable |
| Intermittent Operation Mode | Yes |
| Viscosity Trend Monitoring | Real-time Display via LCD |
| Brand | INNOTEG |
|---|---|
| Model | NT Manual Kit |
| Construction | Stainless Steel (dynamic trap needle), Borosilicate Glass + Stainless Steel Plunger (syringe), PTFE (manual sampling pump) |
| Adsorbent Options | Tenax TA, PDMS, DVB, Carbopack X, Carboxen 1000, Carboxen 1016 |
| Sampling Volume | 10 mL / 50 mL / 100 mL (selectable fixed volumes) |
| Trap Dimensions | 60 mm length, OD/ID = 700 µm / 400 µm |
| Reusability | ≥100 cycles after thermal conditioning |
| Detection Range | ppb–ppt level VOCs |
| Direct GC/GC–MS Compatibility | Yes, thermal desorption in standard split/splitless inlet, <60 s desorption time |
| Sealable Transport | Dual PTFE caps included |
| Custom Fillings | Available for fatty acids, alcohols, aldehydes, esters, ketones |
| Compliance | Designed for ASTM D6196, ISO 16017-1, USP <467>, and EPA TO-17 workflows |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | NT Needle Trap |
| Pricing | Upon Request |
| Connector | Luer-Lock |
| Length | 50–70 mm |
| Inner Diameter Options | 0.4 mm (23G), 0.4 mm / 0.72 mm (22G), 0.35 mm / 0.64 mm (23G) |
| Tip Geometry | Conical with side port, blunt tip, or custom-configurable |
| Packing Material | User-selectable solid-phase sorbents (e.g., Tenax TA, Carbopack X, Carboxen 1000) |
| Thermal Desorption Time | ≤30 s |
| Detection Range | Sub-ppb to ppt-level VOCs in gaseous matrices |
| Solvent-Free Operation | Yes |
| Storage Stability | Sealed with PTFE caps at both ends |
| Brand | Innoteg |
|---|---|
| Origin | Germany |
| Model | Pett Fix |
| Type | Single-Channel Fixed-Volume Pipette |
| Maximum Volume | 1000 µL |
| Sterilization | Full-Assembly Autoclavable (121°C, 20 min) |
| Tip Compatibility | Standard Conical Tips (ISO 8655-compliant) |
| Operating Temperature Range | 15–30°C |
| Relative Humidity | 30–70% RH (non-condensing) |
| Calibration Interval | Recommended annually per ISO 8655-5 |
| Compliance | ISO 8655-1, -2, -5 |
| Brand | INNOTEG |
|---|---|
| Origin | Germany |
| Model | Pett Vario |
| Type | Manual Single-Channel Pipette |
| Maximum Volume | 10 mL |
| Sterilization | Full-Autoclavable (121°C, 20 min) |
| Tip Compatibility | Universal Conical Tips (ISO 8655-compliant) |
| Display | Large Backlit LCD |
| Ergonomic Options | Interchangeable Grip Inserts (Soft-Grip Polymer & Textured Rubber) |
| Piston & Cone Coating | Diamond-Like Carbon (DLC) |
| Volume Range Coverage | 0.1–2 µL to 1–10 mL (model-dependent) |
| Brand | Innoteg |
|---|---|
| Origin | Germany |
| Model | Tor M80 A |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume (Water) | 50 L |
| Speed Range | 50–500 rpm |
| Max. Viscosity | 60,000 mPa·s |
| Max. Torque | 80 N·cm |
| Motor | Brushless DC |
| Display | LED Digital |
| Housing Material | Powder-Coated Cast Aluminum |
| IP Rating | IP54 |
| Dimensions (W×H×D) | 70 × 193 × 147 mm |
| Weight | 1.72 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | SmartEvap-E / SmartEvap-G / SmartEvap-Q |
| Instrument Type | Vacuum-Assisted Parallel Nitrogen Evaporator |
| Temperature Control | PID-regulated, ±1 °C accuracy |
| Gas Delivery | Non-submerged tilted nitrogen nozzles with vortex airflow generation |
| Sample Positioning | Independent thermal zones per position |
| Flow Uniformity | ≤5% inter-channel flow deviation |
| Quantitation | Integrated liquid-level sensors per position, auto-stop on target volume |
| Compatible Vessels | 15 mL centrifuge tubes (down to ~0.2 mL), 50/100/200 mL specialized evaporation tubes |
| Compliance | Designed for GLP-compliant workflows |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Product Type | Solid Phase Extraction (SPE) Cartridges |
| Format | Pre-packed disposable cartridges |
| Matrix Options | Mixed-mode MCX, MAX, HLB, GCB, WCX, WAX, TPT, PSA/Silica, Florisil, Alumina (AL-A, AL-B, AL-N), Silica (SI), NH₂, C18, Polyamide, Molecularly Imprinted Polymer (MIP) for Benzo[a]pyrene, DNPH for Formaldehyde, TPH-specific, and more |
| Pack Sizes | 20–50 units per pack |
| Column Volumes | 1–12 mL |
| Sorbent Masses | 60–2000 mg |
| Compliance | Designed to meet requirements of GB, NY/T, SN, HJ, and ISO 17025-aligned laboratory workflows |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | SPME Fiber |
| Pricing | Upon Request |
| Brand | INNOTEG |
|---|---|
| Model | TB2101 |
| Origin | Guangdong, China |
| Instrument Type | Manual Sorbent Tube Spiking System |
| Tube Compatibility | 3.5" × 1/4" (89 mm × 6.35 mm) Standard Thermal Desorption Tubes |
| Syringe Mounting | Vertical Fixed-Position Needle Holder with Depth-Limited Penetration |
| Solvent & Standard Vial Positions | Integrated Liquid Standard Tray with Dedicated Solvent Bottle Holder |
| Purge Gas Flow Control | Adjustable Mass Flow Regulator (0–500 mL/min typical range) |
| Footprint | Compact Benchtop Design (W × D × H ≈ 280 × 220 × 180 mm) |
| Compliance | Designed for GLP-aligned laboratory workflows |
| Brand | INNOTEG |
|---|---|
| Model | TCS-2 |
| Type | Refrigerated/Heating Circulating Bath |
| Capacity | 10 L |
| Temperature Range | −20 °C to 100 °C |
| Temperature Stability | ±0.05 °C (at 25 °C, water or ethanol) |
| Display Resolution | 0.1 °C |
| Cooling Power | 0.47 kW @ 20 °C |
| Bath Opening Dimensions | 215 mm × 170 mm × 150 mm (W × D × H) |
| Circulation Mode | Internal & External |
| Control System | Microprocessor-based PID with Auto-tuning |
| Construction | 304 Stainless Steel Interior, Insulated Foam Housing |
| Safety Features | Dual-level Liquid Level Detection (Visual + Audible Alarm), Dry-run Protection, Independent Heating/Cooling Status Indicators, Programmable Heating Timer |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Model | TCS-3 |
| Instrument Type | Constant-Temperature Bath Chiller |
| Circulation Mode | External Circulation |
| Temperature Control | Refrigeration & Heating |
| Bath Volume | 5 L |
| Temperature Range | −20 °C to Ambient |
| Temperature Stability | ±0.3 K |
| Pump Type | Pressure/Suction Dual-Mode |
| Refrigeration Power | 0.45 kW @ 10 °C |
| Dimensions (W×D×H) | 222 × 480 × 495 mm |
| Weight | 25 kg |
| Temperature Sensor | PT100 |
| Display | High-Brightness LED |
| Safety Features | Over-Temp, Low-Level, Dry-Run, and Over-Pressure Protection |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | TF-SPME |
| Pricing | Upon Request |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TH-300 |
| Pricing | Available Upon Request |
| Hydrogen Generation Principle | Solid Polymer Electrolyte (SPE) Technology |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 150 W |
| Brand | INNOTEG |
|---|---|
| Origin | Germany |
| Model | Tor M20A |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Stirring Volume (Water) | 15 L |
| Speed Range | 50–2000 rpm |
| Max. Viscosity | 10,000 mPa·s |
| Max. Torque | 20 N·cm |
| Motor | Brushless DC |
| Power Input/Output | 60 W / 46 W |
| Display | LED Digital |
| Housing Material | Powder-Coated Cast Aluminum |
| IP Rating | IP54 |
| Dimensions (W×H×D) | 70 × 193 × 147 mm |
| Weight | 1.56 kg |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % RH |
| Stirrer Shaft Diameter Compatibility | 0.5–8 mm |
| Brand | INNOTEG |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | UHP-HG250 |
| Hydrogen Generation Principle | Proton Exchange Membrane (PEM) Electrolysis of Deionized Water |
| Output Flow Rate | 250 mL/min |
| Output Pressure | 11 bar |
| Hydrogen Purity | >99.99996% (6.6 N) |
| Power Consumption | 200 W |
| Certifications | CE, FCC, MET (UL/CSA) |
| Continuous Operation | 24/7, 365 days/year |
| Optional Features | Auto-refill System, Multi-unit Cascade Control |
| Brand | INNOTEG |
|---|---|
| Origin | Germany |
| Model | Vap Basic |
| Rotational Speed Range | 5–300 rpm |
| Heating Bath Temperature Range | Ambient to 180 °C |
| Condenser Cooling Surface Area | 1500 cm² |
| Bath Capacity | 4 L |
| Brand | Innoteg |
|---|---|
| Origin | Germany |
| Model | Vap Smart |
| Capacity | 4 L |
| Vacuum Capability | Not Specified (Vacuum System Required Separately) |
| Rotation Speed | 20–280 rpm |
| Heating Bath Temperature Range | Ambient to 180 °C |
| Temperature Control Accuracy | ±1 °C |
| Condenser Surface Area | 1500 cm² |
| Motorized Lift Stroke | 140 mm |
| Reversible Rotation | Yes |
| Heating Power | 1300 W |
| Bath Type | Dual-Use (Water or Oil) |
| Safety Modes | 3 Programmable Operating Modes |
| Timer Function | Yes |
| Auto-Lift on Power Failure | Yes |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | VelaEvap |
| Pricing | Upon Request |
| Heating Method | Water Bath |
| Temperature Range | RT+10°C to 100°C |
| Temperature Stability | ±1°C (PID Control) |
| Sample Positions | 24 / 36 / 48 |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | VelaEvap-DC |
| Quotation | Upon Request |
| Temperature Stability | ±1 °C |
| Sample Capacity | 24 positions |
| Nitrogen Flow per Port | 0.3–0.4 L/min |
| Needle Material | 6 mm Stainless Steel Tube + Disposable Pipette Tips |
| Vertical Alignment Tolerance | ±1 mm from Center of Tube Well |
| Temperature Uniformity | ±1 °C across All Positions |
| Flow Uniformity | ≤5% deviation between ports |
| Compatible Tube Size | 5–50 mL centrifuge tubes |
| Brand | INNOTEG |
|---|---|
| Model | WM-1 |
| Type | Magnetic Stirrer with Integrated Heating Plate |
| Max Stirring Volume | 20 L |
| Speed Range | 50–2000 rpm |
| Temperature Range | Ambient to 340 °C (Heating Plate) |
| Heating Power | 750 W |
| Temperature Sensor | PT1000 RTD Probe |
| Construction | Anodized Aluminum Heating Plate with Ceramic Coating |
| Safety Features | Adjustable Over-Temperature Cut-off, Auto-Cooling Residual Heat Warning, Keypad Lock, Programmable Timer with Audible Alert, Dual-Mode Operation (Stir Only / Heat Only / Heat & Stir), Reversible Rotation & Intermittent Stirring Modes |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | INNYAO |
|---|---|
| Model Series | OAR-30, OAR-100, OAR-300 |
| Temperature Range | 10–180 °C |
| Reaction Volume | 100 mL (per stage) |
| Origin | Zhejiang, China |
| Supplier Type | Authorized Distributor |
| Compliance | Designed for laboratory-scale continuous flow synthesis and kinetic studies |
| Brand | RSJ (Reesee) |
|---|---|
| Origin | Fujian, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | INSPIRE |
| Pricing | Upon Request |
| Purified Water Grade | GB/T 6682–2008 Grade II |
| Resistivity | ≥10 MΩ·cm @ 25 °C |
| Conductivity | <0.1 μS/cm (after optional DI polishing) |
| Production Capacity | 70–300 L/h (RO-only or RO+EDI configurations) |
| Storage Tank Options | 350–1000 L, SUS304/SUS316L sanitary design |
| Control System | Siemens PLC + 7″ color touchscreen HMI |
| Data Logging | SD card storage with USB export |
| Compliance | Meets GB/T 6682–2008, supports GLP/GMP traceability via audit-ready event logs |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | HCS410 |
| Temperature Range | –60 °C to 400 °C |
| Temp. Resolution | 0.01 °C |
| Temp. Stability | ±0.02 °C at 100 °C |
| Max. Heating Rate | +50 °C/min |
| Max. Cooling Rate | –50 °C/min |
| Control Method | Switching PID (LVDC PID optional) |
| Sensor | 100 Ω Platinum RTD |
| Sample Area | 38 mm × 50 mm |
| Chamber Height | 2.0 mm / 6.0 mm (w/ spacers) |
| Viewing Aperture | 5 mm |
| Working Distance | 6.5 mm |
| Condenser Distance | 13 mm |
| X-Y Micropositioner (optional) | 10 µm resolution |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | HCS602 |
| Temperature Range | –190 °C to +600 °C (optional up to +700 °C) |
| Temperature Stability | ±0.1 °C at 100 °C |
| Minimum Temperature Resolution | 0.01 °C |
| Max Heating Rate | +200 °C/min at 100 °C |
| Max Cooling Rate | –130 °C/min at 100 °C (with LN2-P4 accessory) |
| Sample Area | 35 mm × 35 mm |
| Standard Optical Window | 20 mm × 20 mm |
| Optional Large Optical Window | 38 mm × 38 mm |
| Minimum Working Distance | Objective ≥ 5.3 mm, Condenser ≥ 10.0 mm |
| Controller | STC200 standalone unit with RS232 interface and Windows software |
| Software Support | LabVIEW drivers (IEEE-488 & RS232) included |
| Compliance | Designed for ASTM E2267, ISO 11357, and USP <1031> thermal microscopy applications |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | HCS622G |
| Temperature Range | −190 °C to +600 °C (optional up to +700 °C) |
| Temperature Resolution | 0.1 °C |
| Temperature Stability | ±0.01 °C at 100 °C |
| Max. Heating Rate | 230 °C/min at 200 °C |
| Max. Cooling Rate | −130 °C/min at 200 °C |
| Min. Ramp Rate | ±0.1 °C/hour |
| Control Method | Switching PID (LVDC PID optional) |
| Sensor | 100 Ω Platinum RTD |
| Working Distance | 5.8 mm |
| Condenser Distance | 12.7 mm |
| Sample Area | 38 mm × 38 mm |
| Chamber Height | 0.76 mm (with inner cover) |
| Viewing Aperture | 26.5 mm (reflected light), 2.0 mm (transmitted light) |
| Vacuum Port | 1/8″ NPT female |
| Gauge Port | 1/8″ NPT female |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | HSC302 |
| Temperature Range | −190 °C to +400 °C |
| Temperature Accuracy | ±0.1 °C (at 100 °C, 400 °C, and below ambient) |
| Temperature Stability | ±0.1 °C (at 100 °C) |
| Max Ramp Rate | ±100 °C/min |
| Min Ramp Rate | ±0.1 °C/h |
| Minimum Working Distance | >5.6 mm (objective), >10.0 mm (condenser) |
| Sample Size | 38 × 50 mm |
| Transmitted Light Aperture Options | 2, 5, 8, or 10 mm |
| Controller | STC200 (RS232 interface, 230 V input) |
| Accessories | XY Positioner (XY-A-01), Long Working Distance Polarizing Condenser (LWDC1, WD = 20 mm), 2 L LN₂ Cooling System (LN2-P2UF2), Circulating Water Pump (WP230C) |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | TSA02i |
| Temperature Range | –25°C to +60°C (optional extended range available) |
| Temperature Resolution | ±0.01°C at 37°C |
| Temperature Stability | ±0.1°C/hour |
| Max Heating Rate | +50°C/min at 37°C |
| Max Cooling Rate | –50°C/min at 37°C |
| Sample Area | 53 mm × 78 mm |
| Viewing Aperture | 17 mm (with sample plate), 40 mm (without sample plate) |
| Working Distance | 1.3 mm (standard), 2.8 mm (with sample plate), 14.6 mm (inner cover only) |
| Chamber Height | 12.8 mm (inner cover), 32 mm (outer cover) |
| Condenser Clearance | 35 mm (with outer cover), 14.6 mm (inner cover only) |
| Brand | INTEGRA |
|---|---|
| Origin | Switzerland |
| Model | ASSIST PLUS |
| Plate Positions | 4 |
| Pipetting Accuracy | ±0.5 µL |
| Pipetting Range | 0.5–1250 µL |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | HJ-6 |
| Heating Element Surface Temperature | 380 °C |
| Voltage | 220 V ±10%, 50 Hz |
| Speed Range | 0–1200 rpm |
| Insulation Material | High-Temperature Alkali-Free Fiber |
| Heating Element | Sealed Ni-Cr Resistance Wire |
| Enclosure | Seamless Drawn Metal Shell with Epoxy Powder Coating |
| Control Type | Solid-State Electronic Temperature & Speed Regulation |
| Compliance | Designed for General Laboratory Use under IEC 61010-1 Safety Standards |