Common Laboratory Equipment
Filter
Showing 1051–1080 of 4952 results
| Brand | AYAN Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-ZA10L |
| Price | USD 940 (est.) |
| Hydrocarbon Removal Principle | Oil-Free Compressor |
| Output Flow Rate | 0–10 L/min |
| Output Pressure | 0–0.5 MPa |
| Total Hydrocarbon Content | < 0.1 ppm (as C₁–C₄, measured by FID) |
| Dew Point | −40 °C to +40 °C (adjustable via integrated desiccant dryer and dual-stage filtration) |
| Brand | AYAN Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-ZA5L |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Oxidation |
| Output Flow Rate | 0–5 L/min |
| Output Pressure | 0–0.5 MPa |
| Hydrocarbon Content | <0.1 ppm (C1–C6 total) |
| Dew Point | −40 °C |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | OD-8 |
| Price Range | USD 35,000–57,000 |
| Automation Level | Fully Automatic |
| Channel Count | Multi-channel |
| Extraction Method | Column-Based SPE |
| Fluidic Materials in Contact | PharMed® and PTFE |
| Sample Throughput | Up to 24 textile specimens per run (8 primary channels + 3× parallel staging) |
| Flow Rate | 6 mL/min (adjustable range: 5–8 mL/min) |
| Total Elution Volume Capacity | 0–120 mL |
| Certified Compliance | Designed to meet all operational requirements of GB/T 17592–2006 “Textiles — Determination of Certain Azo Colorants” |
| Brand | AZZOTA |
|---|---|
| Origin | USA |
| Model | BHY-205002 |
| Die Inner Diameter | 13 mm |
| Maximum Applied Load | 12 tons |
| Die Outer Diameter | 44.5 mm |
| Height | 71 mm |
| Mass | 0.67 kg |
| Material | High-grade stainless steel |
| Includes | Polished die sleeve (mirror-finish), vacuum base with sealing O-ring, plunger with O-ring, two polished anvils, and ejection tool |
| Brand | AZZOTA |
|---|---|
| Origin | USA |
| Model | BHY-81A |
| Working Pressure | 60 MPa (20 tons) |
| Clamp Travel Range | 0–12 cm |
| Platen Stroke | 4.5 cm |
| Platen Diameter | 10 cm |
| Pressure Gauge Range | 0–100 MPa |
| Dimensions (W×D×H) | 35 × 25 × 40 cm |
| Net Weight | 48 kg |
| Die Diameter | 13 mm (customizable) |
| Brand | AZZOTA |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | BHY-81B Laboratory Hydraulic Pellet Press |
| Working Pressure | 60 MPa (20 ton force) |
| Clamp Travel Range | 0–10 cm |
| Platen Stroke | 4.5 cm |
| Platen Diameter | 10 cm |
| Pressure Gauge Range | 0–100 MPa |
| Dimensions (W×D×H) | 30 × 25 × 35 cm |
| Net Weight | 30 kg |
| Die Diameter | 13 mm (customizable) |
| Construction | Stainless steel platens |
| Operation | Manual |
| Display | Analog pressure gauge with real-time reading |
| Brand | b.safe |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | B.SAFE |
| Pricing | Upon Request |
| Material | Polypropylene (PP) |
| Temperature Range | 0 °C to +110 °C |
| Chemical Resistance | Excellent (++) |
| Flame Rating | UL 94 V-0 |
| Membrane Pore Size | 1 µm |
| Service Life | 6 months |
| Connection | Luer Lock |
| Packaging Units | 2 pcs (M 505-01), 10 pcs (M 505-02), 50 pcs (M 505-03) |
| Brand | b.safe |
|---|---|
| Origin | Germany |
| Model | BSAFE-M345 Series |
| Material | PPS outer cap, PTFE inner core & sealing components |
| Temperature Resistance | –20 °C to +200 °C |
| Chemical Resistance | +++ (excellent for HPLC solvents including acetonitrile, methanol, THF, chloroform, DCM, acetone, and dilute acids/bases) |
| Filtration | Integrated activated carbon exhaust filter with visual service-life indicator |
| Sealing Interface | GL14 thread for filter housing |
| Tubing Compatibility | 1.6 mm (green), 2.2 mm (purple), 3.2 mm (yellow), and 5.5–8 mm (white) ID PFA/PTFE tubing |
| Sterilization | Autoclavable at 200 °C |
| Seal Type | Viton® flat gasket + PTFE lip seal for vapor-tight isolation |
| Brand | b.safe |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Laboratory Safety Equipment |
| Model | b.safe Exhaust Filter |
| Pricing | Upon Request |
| Brand | b.safe |
|---|---|
| Origin | Germany |
| Product Type | Imported HPLC Solvent Bottle Sealing System |
| Model | Solvent Bottle Sealing System |
| Material | PTFE/PPS, PTFE/PP, PTFE/PE |
| Temperature Resistance | –20 °C to +200 °C (PPS variants), 0 °C to +110 °C (PP variants), –50 °C to +80 °C (PE variants) |
| Chemical Resistance | +++ (Universal) / ++ (Very Good) |
| Tube Configuration Options | 1–6 × Ø3.2 mm PFA-tube ports (yellow), 0–5 blind plugs (white), UNF 1/4″ thread interface |
| Sealing Element | Viton® flat gasket with PTFE sealing lip |
| Filtration | Hydrophobic porous PTFE membrane (6-month service life, color-indicating replacement window) |
| Sterilization | Autoclavable (121 °C, 20 min), dishwasher-safe |
| Compliance | Designed for GLP/GMP-compliant HPLC and UHPLC solvent delivery environments |
| Brand | b.safe |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | b.safe HPLC Solvent Delivery Kit |
| Pricing | Upon Request |
| Brand | b.safe |
|---|---|
| Origin | Germany |
| Model | HPLC Solvent Dispensing Cap (GL45 & GLS80) |
| Material | Polypropylene (PP) for cap body and GLS80 seal |
| Temperature Range | 0 °C to +110 °C |
| Chemical Resistance | Excellent (rated ++) |
| Air Vent Max OD | 14 mm (recommended for GL45) |
| Central Port Configuration | 3× fine-tube threaded connections (M6 × 0.75) |
| Side Ports | 4× lateral barbed fittings (GL45 version) |
| Color | Opaque white |
| Compliance | Designed for ISO/IEC 17025-compliant HPLC solvent handling environments |
| Brand | b.safe |
|---|---|
| Origin | Germany |
| Product Type | Preparative HPLC Solvent Bottle Cap |
| Material | PPS Outer Housing + PTFE Inner Core |
| Temperature Resistance | –20 °C to +200 °C |
| Chemical Resistance | Excellent (Universal Grade) |
| Tube Compatibility | OD 4.0–6.35 mm (standardized for 6.35 mm PFA tubing) |
| Filtration | Integrated hydrophobic PTFE membrane (0.2 µm pore size), visual lifetime indicator (color transition to red), 6-month service life under standard lab conditions |
| Sealing System | Viton® flat gasket with PTFE sealing lip |
| Thread | UNF 1/4″ (angled for unobstructed tube insertion) |
| Sterilization | Autoclavable (121 °C, 20 min), dishwasher-safe |
| Ergonomics | Textured PPS surface, glove-compatible grip, rotatable white PTFE inner core for tool-free tightening |
| Brand | Bandelin |
|---|---|
| Origin | Germany |
| Model | PR140D |
| Tank Capacity | 5 L |
| Ultrasonic Frequency | 35 kHz |
| Ultrasonic Power Output | 120 W |
| Adjustable Power | Yes |
| Adjustable Temperature | No (PR140D) / Yes (PR140DH) |
| Timer Range | 1–30 min |
| Sound-Dampening Lid | Included |
| Drain Valve | Manual |
| Tank Material | AISI 304 Stainless Steel |
| Max. Pipette Length Supported | 755 mm |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | Bandelin |
|---|---|
| Origin | Germany |
| Model | DIGITEC Series (DT/DK/RK) |
| Type | General-purpose ultrasonic cleaner |
| Tank capacity | 0.9–90 L |
| Ultrasonic frequency | 35 kHz |
| Ultrasonic power output | 240–2400 W |
| Power adjustment | Yes, 10–100% in 1% increments |
| Temperature control | Yes, 20–80 °C (±1.5 °C accuracy for DIGITEC 10P |
| Timer | 1–99 min or continuous operation |
| Lid with acoustic damping | Yes |
| Manual fill/drain | Yes |
| Heating element | Optional “H” variants |
| Safety features | Over-temperature cutoff, boil-delay protection (selectable), low-level detection, drip-proof housing (IP32–IP33) |
| Tank material | Stainless steel AISI 304 (1.4301) or AISI 316 (1.4571), thickness up to 2 mm |
| Certifications | CE, Medical Device Directive compliant (except RK 1050) |
| Interface | RS232 (DIGITEC 10P), PC software support (DIGITEC 10P only) |
| Data storage | 10 programmable cleaning protocols (DIGITEC 10P) |
| Brand | Bandelin |
|---|---|
| Origin | Germany |
| Model | DL102H |
| Chamber Volume | 3 L |
| Heating Power | 120 W |
| Operating Temperature | Ambient (non-heated mode) |
| Cleaning Solution Compatibility | Single-solution compatible |
| External Dimensions (L×W×D) | 260 × 160 × 250 mm |
| Ultrasonic Peak Power | 480 W |
| Nominal Ultrasonic Power | 120 W |
| Drain Valve | Integrated ball valve |
| Front Panel Material | Anodized aluminum foil |
| Brand | Bandelin |
|---|---|
| Origin | Germany |
| Model | SONOREX RK1028H |
| Tank Volume | 5.5 L |
| Heating Power | 280 W |
| Operating Frequency | 35 kHz |
| External Dimensions (L×W×D) | 325 × 175 × 295 mm |
| Temperature Range | Ambient to 60 °C (heated operation) |
| Brand | Bandelin |
|---|---|
| Origin | Germany |
| Model | DT 1028F |
| Bath Volume | 35 L |
| Temperature Range | 0–100 °C |
| Temperature Stability | ±1 °C |
| Circulation Type | Internal & External |
| Oscillation Platform Dimensions | 410 × 280 mm (L × W) |
| Maximum Load Capacity | 36 × 10 mL vials, 36 × 25 mL vials, 18 × 50 mL vials, 12 × 100 mL vials, or 10 × 250 mL Erlenmeyer flasks |
| Ultrasonic Power (Peak / Nominal) | 1280 W / 320 W |
| Amplitude | 20 mm (load-independent) |
| Reciprocating Motion | 4-step programmable |
| Drain Valve | Yes |
| Optional Clamp | EK10–250 (sold separately) |
| Brand | Bar Control |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Industrial Pressure Switch |
| Model | PDL Series (Pneumatic) |
| Operating Principle | Mechanical Diaphragm-Actuated Snap-Action Switch |
| Contact Material | Pure Silver |
| Sealing Material | PTFE-Coated Piston |
| Repeatability | ±2.0% FS |
| Hysteresis Adjustment | Continuously Adjustable via External Knob |
| Electrical Rating | 250 VAC / 6 A (resistive), 30 VDC / 2 A (inductive) |
| IP Rating | IP65 |
| Process Connection | G¼" BSP Male |
| Media Compatibility | Compressed Air, Inert Gases, Vacuum (down to -0.95 bar) |
| Temperature Range | -20 °C to +80 °C |
| Certifications | CE, RoHS, UL Recognized (E487617) |
| Brand | Bartels |
|---|---|
| Origin | Germany |
| Model | BP7 |
| Pump Type | Piezoelectric Dual-Chamber Micro Diaphragm Pump |
| Flow Rate Range | 100–14,000 µL/min |
| Dimensions | 30 × 15 × 3.8 mm |
| Weight | 2 g |
| Wetted Material | PPSU (Polyphenylsulfone) |
| Operating Temperature | 0–70 °C |
| Lifetime | ≥5,000 h |
| Sterilization Compatibility | Autoclavable (Steam, Ethylene Oxide, Gamma) |
| Control Interface | Analog/Digital (Open-Source Driver Support) |
| Key | Brand: Bartels |
|---|---|
| Origin | Germany |
| Model | MP6 |
| Microwave Power | 1200 W |
| Microwave Frequency | 2300 MHz |
| Temperature Control Range | −20–50 °C |
| Temperature Control Accuracy | ±1 °C |
| Pump Type | Dual Piezoelectric Micro-Diaphragm |
| Fluid Compatibility | Liquids, Gases, Multiphase Mixtures |
| Actuation | Piezoelectric |
| Dimensions | Compact (Sub-50 mm footprint) |
| Operating Principle | Positive Displacement via Dual Diaphragm Oscillation |
| Brand | BAYE SMART |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | BS280CD |
| Quotation | Upon Request |
| Chamber Volume | 180 L |
| Heating Power | 6 kW |
| Maximum Wash Temperature | 93 °C |
| Compatible Cleaning Agents | Acidic or Alkaline Liquid Detergents |
| External Dimensions (L×W×D) | 875 (845) × 900 × 710 mm |
| Brand | BAYE SMART |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | BS580D |
| Quotation | Upon Request |
| Chamber Volume | 360 L |
| Heating Power | 9 kW |
| Maximum Wash Temperature | 93 °C |
| Compatible Cleaning Agents | Acidic & Alkaline Liquid Detergents |
| External Dimensions (L×W×D) | 1800 × 785 × 765 mm |
| Brand | BCT |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Regional Classification | Domestic (China) |
| Model | 990A |
| Pricing | Upon Request |
| Brand | BCT |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | 990H |
| Pricing | Available Upon Request |
| Brand | BCT |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | BCT 990MT |
| Pricing | Upon Request |
| Brand | BCT |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | BCT-930 |
| Pricing | Available upon Request |
| Brand | BCT |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | BCT-960L |
| Pricing | Available Upon Request |
| Brand | BCT |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | BCT-990F |
| Pricing | Available Upon Request |
| Brand | BCT |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (China) |
| Model | BCT DDS2000 |
| Pricing | Upon Request |