Common Laboratory Equipment
Filter
Showing 14251–14280 of 17607 results
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Forced-Air Drying Oven |
| Temperature Range | +10 °C above ambient to 250 °C (optional up to 300 °C) |
| Chamber Volume | 23–715 L |
| Air Circulation | Motor-driven forced convection with adjustable fan speed |
| Control System | Microprocessor-based controller with LCD display |
| Compliance | IQ/OQ documentation available |
| Optional Accessories | PT100 temperature probe, HEPA inlet filter, observation window with LED lighting (models ≥60 L), door lock (models ≥60 L), left-hinged door (except model 700), stainless steel exterior |
| Construction | Stainless steel chamber and housing |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Vertical-Lift Muffle Furnace |
| Max Operating Temperature | 1600 °C / 1750 °C / 1800 °C |
| Chamber Volume | 2 L (benchtop), 4 L (benchtop), up to 2000 L (industrial vertical) |
| Heating Element | MoSi₂ |
| Insulation | High-purity alumina fiber |
| Construction | Dual-wall stainless steel housing with rear ventilation |
| Lift Mechanism | Motorized base-lift or furnace-bottom lift configuration |
| Optional Features | Inert gas inlet, automatic exhaust flap, protective atmosphere port, reinforced load-bearing base |
| Compliance | Designed per IEC 61000-6-3, EN 60519-1, and applicable parts of ISO/IEC 17025 for laboratory thermal equipment |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | High-Temperature Muffle Furnace |
| Max Operating Temperature | 1500 °C, 1600 °C, 1750 °C, or 1800 °C |
| Chamber Uniformity | ±3 °C (at setpoint) |
| Construction | Dual-wall insulated cabinet with rear ventilation |
| Insulation | High-purity alumina fiber (low thermal conductivity, <0.12 W/m·K at 1000 °C) |
| Heating Elements | Dual-side mounted molybdenum disilicide (MoSi₂) rods |
| Control System | Solid-state relay (SSR) with PID algorithm |
| Temperature Accuracy | ±1 °C (typical, within operating range) |
| Safety Compliance | EN 60519-2 certified overtemperature protection |
| Optional Features | Motorized bottom door, inert gas inlet port, active cooling module, programmable exhaust damper |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | High-Temperature Muffle Furnace |
| Max Operating Temperature | 1400 °C / 1500 °C / 1600 °C |
| Heating Element | Silicon Carbide (SiC) rods, laterally mounted |
| Chamber Lining | Ceramic fiber insulation |
| Enclosure | Dual-wall construction with rear ventilation |
| Door Type | Top-hinged lift door with reinforced fiber seal |
| Base Lining | High-temperature ceramic fiber board |
| Standard Accessories | Ceramic hearth plate |
| Temperature Control | Solid-state relay with PID algorithm |
| Exhaust Port | Integrated vent opening on top |
| Surface Temperature | <60 °C at ambient conditions |
| Compliance | Designed to meet EN 61000-6-3 (EMC), EN 61000-6-2, and general lab safety requirements per DIN VDE 0701-1 |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | KLS 07/11/M (1150 °C) / KLS 05/13/M (1300 °C) |
| Max Operating Temperature | 1150 °C or 1300 °C |
| Chamber Construction | High-purity ceramic muffle liner |
| Heating Configuration | Four-sided embedded heating elements |
| Insulation | Dual-wall steel housing with rear ventilation and low-surface-temperature design |
| Door Type | Top-lifting (KLS 07/11/M) or side-hinged (KLS 05/13/M) with ceramic fiber insulation |
| Control System | Silent solid-state relay temperature controller |
| Safety | EN 60519-2 compliant overtemperature limiter |
| Accessories | Stackable crucibles, ceramic/stainless steel collection trays (1300 °C / 1100 °C max), heat-resistant tongs (300 mm / 500 mm), gloves (600 °C / 900 °C) |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | High-Temperature Muffle Furnace |
| Max Operating Temperature | 1600 °C / 1750 °C / 1800 °C (configurable) |
| Chamber Volume | 16 L – 70 L |
| Heating Element | Dual-side MoSi₂ (optional rear-wall configuration) |
| Chamber Lining | High-purity alumina fiber insulation |
| External Casing | Polished stainless steel (AISI 304) |
| Door Mechanism | Parallel-guided safety door |
| Cooling | Optional forced-air cooling system |
| Exhaust | Top-mounted vent port with optional automatic exhaust lid |
| Atmosphere Options | Inert gas inlet (N₂, Ar), manual or programmable gas mixing module |
| Control System | Silent solid-state relay regulation with ±1 °C temperature stability (at setpoint) |
| Compliance | Designed per EN 61000-6-3 (EMC), EN 61000-6-2, and IEC 61010-1 for laboratory equipment safety |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | MoSi2 |
| Max Operating Temperature | 1700 °C / 1800 °C (short-term) |
| Tube Diameter Range | 38–75 mm |
| Heating Zone Length | 200–400 mm |
| Standard Tube Material | C799 ceramic |
| Insulation | Vacuum-formed high-purity alumina-silica fiber |
| Heating Element | Parallel-mounted MoSi₂ rods |
| Control | Solid-state semiconductor controller |
| Enclosure | Dual-wall housing with rear ventilation |
| Safety | EN 60519-2 compliant overtemperature limiter |
| Optional Configurations | Three-zone temperature control, vertical orientation with base stand, water-cooled flanges, gas-tight stainless steel flanges, manual/automated gas supply systems, internal water-cooling for rapid cooldown |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Natural Convection Drying Oven |
| Temperature Range | +5 °C above ambient to 250 °C |
| Max Operating Temperature | 250 °C |
| Chamber Volume | 55–715 L |
| Control System | Microprocessor-based controller with LCD display |
| Compliance | IQ/OQ documentation available |
| Safety Features | Overtemperature protection, insulated double-wall construction, door lock mechanism |
| Optional Accessories | Observation window with LED lighting, PT100 temperature probe, software interface, ducting ports (Ø25/50/100 mm), left-hinged door (except model 700) |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | T-Series |
| Max Operating Temperature | 1100 °C / 1200 °C / 1300 °C |
| Chamber Lining | Ceramic Fiber Insulation |
| Heating Configuration | Dual-Side & Top Radiant Heating (Ceramic Tube-Mounted Elements) |
| Control System | Silent Solid-State Relay with PID Regulation |
| Safety Compliance | EN 60519-2 Overtemperature Protection |
| Optional Features | Exhaust Chimney (with/without Fan & Catalyst), Inert Gas Inlet, Mobile Floor Stand, Forced-Air Circulation Kit |
| Chamber Uniformity | ±3 °C at Setpoint (typical, per ISO 8573-1 reference methodology) |
| External Surface Temperature | <55 °C at max operating temperature |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | TC-UF Series (1100 °C / 1200 °C variants) |
| Temperature Range | Up to 1100 °C or 1200 °C |
| Construction | Stainless steel exterior, high-purity ceramic fiber insulation |
| Heating Element | Embedded resistance wire in ceramic heating plates |
| Control System | Silent solid-state relay with PID temperature regulation |
| Safety | Dual-stage overtemperature protection per EN 60519-2 |
| Exhaust Options | Optional exhaust chimney with fan and catalytic converter |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | TCC-Series |
| Control Architecture | Microprocessor-Based PID with Optional Siemens S7 PLC Integration |
| Display | Graphical LCD Interface |
| Expandability | Modular I/O, Software Integration (TCC-View), Remote Monitoring Capability |
| Compliance | DIN ISO 9001 Process Control Requirements, Supports GLP/GMP Data Integrity Protocols (with Audit Trail Enabled Software Option) |
| Power Control | Solid-State Relays / SCR Phase-Angle Control / Multi-Zone DC-Driven Heating Management |
| Connectivity | RS485/Modbus RTU, Ethernet (Optional), USB Data Export |
| Brand | Thermo Fisher |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | Aquanex Ultra-Pure Water System |
| Pricing | Upon Request |
| Water Purity Grade | ASTM Type I (Ultra-Pure Water) |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Origin Category | Imported |
| Model | AutoTrace 280 |
| Automation Level | Fully Automated |
| Channel Count | 6-Channel |
| Extraction Format | Cartridge-Based SPE (with optional 47 mm disk support) |
| Solvent Selection | 5 Solvents (automated selection for conditioning, washing, elution) |
| Sample Volume Range | 20 mL – 20 L |
| Compatible SPE Formats | 1 mL, 3 mL, 6 mL cartridges and 47 mm SPE disks |
| Dual-Cartridge Mode | Supported |
| Waste Management | Separate aqueous/organic waste lines |
| Valve Material | PEEK rotary 12-port valve (acid/base compatible) |
| Software | AutoTrace 280 Control Software (24 user methods onboard |
| Regulatory Alignment | EPA-compliant for water analysis (e.g., EPA Methods 508.1, 525.3, 549.2, 625.1) |
| Power | 100–240 VAC, 47–63 Hz, ≤150 VA |
| Dimensions (H×W×D) | 57 × 63.5 × 69 cm |
| Weight | 68.1 kg |
| Air Pressure | 0–30 psi (0–1.4 bar) output |
| Pump Accuracy | ±2.5% |
| Fluid Path Materials | Stainless steel tubing, TFE, Kynar®, ceramic pistons, Rulon® valve seals |
| Exclusion | Acetic acid and acetone not recommended |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Model | Primo / Primo R |
| Centrifuge Type | Benchtop Refrigerated Centrifuge |
| Maximum Speed | 15,000 rpm |
| Maximum RCF | 21,885 × g |
| Maximum Capacity | 4 × 100 mL |
| Temperature Range | –9 °C to 40 °C |
| Acceleration/Deceleration Steps | 9 acceleration / 2 deceleration profiles |
| Noise Level | < 62 dBA |
| Timer Range | 0–9 h 59 min + continuous mode |
| Drive System | Brushless DC motor |
| Control System | EASYcontrol II microprocessor-based interface |
| Rotor Recognition | Automatic |
| Imbalance Detection | Electronic, real-time, rotor-agnostic |
| Safety Certification | EN 61010-1, EN 61010-2-020, EN 50081-1, EN 50082-1, UVV VBG 7z |
| Dimensions (H×W×D) | 315 × 380 × 475 mm |
| Weight | 40 kg |
| Power Consumption | 350 W |
| Construction | Stainless steel base, reinforced aluminum chamber |
| Rotor Compatibility | Fixed-angle (6 × 15/50 mL Falcon), horizontal (4 × 100 mL DIN, 4 × 15/50 mL Falcon, 12 × 7/15 mL blood tubes) |
| Brand | Thermo Fisher |
|---|---|
| Origin | Germany |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Magnetic Stirrer |
| Model | Cimarec Biosystem Direct / Cimarec Biosystem 4 Direct |
| Maximum Stirring Volume | 5 L (single-position) / 2 L per position (4-position) |
| Speed Range | 5–120 rpm |
| Temperature Control Range | −10 °C to +40 °C |
| Construction | Stainless Steel Housing |
| Environmental Rating | Up to 95% Relative Humidity |
| Brand | Thermo Fisher |
|---|---|
| Origin | Germany |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Magnetic Stirrer |
| Model | Cimarec i Poly 15 / Cimarec i Advanced Multipoint 6/15 |
| Max Stirring Volume | 5 L (total system capacity) |
| Speed Range | 80–2000 rpm |
| Temperature Control Range | −10 °C to +40 °C |
| IP Rating | IP64 (Advanced Multipoint only) |
| Panel Material | Seamless stainless steel |
| Display | Digital LED |
| Max Vessel Capacity per Position | 3 L (Advanced Multipoint), 250 mL × 15 or 1 L × 6 (Poly 15) |
| Brand | Thermo Fisher |
|---|---|
| Origin | Germany |
| Manufacturer | Thermo Fisher Scientific |
| Type | Floor-standing centrifuge |
| Category | Blood bank centrifuge |
| Rotor configuration | Horizontal (swing-out) rotor |
| Maximum capacity | 8 × 550 mL blood bags |
| Maximum speed | 5,000 rpm |
| Maximum RCF | 7,295 × g |
| Dimensions (W × D × H) | 1015 × 816 × 900 mm |
| Speed range | High-speed (up to 5,000 rpm) |
| Application class | Cellular/bacterial separation |
| Compliance | IEC 61010-1, ISO 13485, FDA 21 CFR Part 11 (software-enabled), EU MDR Annex I |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Imported Controlled-Rate Freezer |
| Model Numbers | 7451, 7453, 7455, 7457, 7459 |
| Certifications | UL, CSA, CE Mark |
| Cooling Rate | 0.1–99.9 °C/min |
| Heating Rate | 0.1–10.0 °C/min |
| Temperature Uniformity | < ±2.0 °C |
| Controller | Microprocessor-based |
| Control Mode | Sample- or Chamber-sensing |
| Display | 4×20 LCD |
| Preset Programs | 6 |
| User-Programmable Protocols | 10 |
| Insulation | In-situ foamed polyurethane |
| Valve System | Dual solenoid valves |
| Cooling Medium | Liquid nitrogen (LN₂) |
| Chamber Volumes | 17.0 L (0.6 cu ft), 34.0 L (1.2 cu ft), 48.1 L (1.7 cu ft) |
| IVF-Specific Models | FDA-cleared for human assisted reproductive technology applications |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | ASE 150 |
| Instrument Type | Solid-Phase Extraction System (ASE) |
| Operating Temperature Range | Up to 200 °C |
| Maximum Pressure | 1500 psi |
| Pump Flow Rate | 70 mL/min |
| Sample Capacity | 1–100 g |
| Extraction Cell Volumes | 1, 5, 10, 22, 34, 66, and 100 mL |
| Solvent Consumption Reduction | 50–90% vs. Soxhlet or Ultrasonic Extraction |
| Fluid Path Material | Dionium™ (chemically inert, acid- and base-resistant) |
| Integrated Filtration | On-line filtration and in-cell cleaning capability |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | ASE 350 |
| Pricing | Available Upon Request |
| Brand | Thermo Fisher |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Thermo Fisher Dionex ASE 350 |
| Quotation | Upon Request |
| Sample Capacity | 1–100 g |
| Throughput | Up to 24 unattended extractions |
| Operating Temperature | Up to 200 °C |
| Maximum Pressure | 1500 psi (10 MPa) |
| Pump Flow Rate | 70 mL/min |
| Solvent Compatibility | Organic and aqueous solvents |
| Extraction Cell Volumes | 1, 5, 10, 22, 34, 66, and 100 mL |
| Collection Vial Options | 60 mL and 250 mL |
| Dimensions (W × D × H) | 67.3 × 69.3 × 61.7 cm |
| Weight | 65 kg |
| Power Supply | 240 V, 50/60 Hz, ≤500 VA |
| Pneumatic Requirements | Air at 400–827 kPa (60–120 psi) |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Category | Imported Instrument |
| Model | ASE+Rocket |
| Instrument Type | Accelerated Solvent Extractor (ASE) with Integrated Rotary Evaporation |
| Price Range | USD 42,000 – 70,000 (FOB US Port) |
| Extraction Principle | High-Temperature/High-Pressure Static-Dynamic Solvent Extraction |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ASE+Rocket |
| Quotation | Available Upon Request |
| Instrument Type | Accelerated Solvent Extraction (ASE) System with Integrated Evaporation |
| Brand | Thermo Fisher |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestically Assembled |
| Model | ASE350 Accelerated Solvent Extractor (Domestically Assembled) |
| Pricing | Available Upon Request |
| Brand | Thermo Fisher |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | OEM Manufacturer |
| Region of Origin | Domestic (China) |
| Model | EXTREVA™ ASE™ Accelerated Solvent Extractor |
| Instrument Type | Solid-Liquid Extraction (not Liquid-Liquid) |
| Temperature Range | 40–200 °C |
| Pressure Range | 200 bar (corrected from erroneous "200 Pa") |
| Extraction Cell Volumes | 1, 5, 10, 22, 34, 66, and 100 mL |
| Extraction Time | 2–300 min |
| Dimensions (W×D×H) | 100 × 65.2 × 86.6 cm |
| Sample Capacity | Dual trays, 16 positions total |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Model | F6000-60 / F30400-60 |
| Temperature Range | 100–975 °C |
| Chamber Volume | 15 L or 45 L |
| Air Flow Control | 0–80 L/min (adjustable via front-mounted flowmeter) |
| Temperature Stability at 750 °C | ±3 °C |
| Heating Rate | 8 °C/min (≤500 °C), 6 °C/min (500–750 °C) |
| Compliance | ASTM D3174 |
| Gas Inlet Ports | 1 × 0.95 cm thermocouple port, 1 × 0.635 cm or 0.876 cm soft-hose barb for inert gas supply |
| Control Options | B1 (single-setpoint), C1 (8-segment single program), D1 (16-segment × 4 programs, RS232 interface) |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Benchtop Box-Type Muffle Furnace |
| Models | FB 1300 / FB 1400 |
| Max Temperature | 1100°C |
| Temperature Uniformity (at 1000°C) | ±7.8°C (FB 1300) / ±5.0°C (FB 1400) |
| Temperature Stability (at 1000°C) | ±0.3°C (FB 1300) / ±0.5°C (FB 1400) |
| Control System | Digital Single-Setpoint (Class A1) |
| Heating Method | Resistive Wire (Ni-Cr Alloy) |
| Chamber Dimensions (W×H×D, mm) | 103×98×130 (FB 1300) / 127×108×152 (FB 1400) |
| External Dimensions (W×H×D, mm) | 230×360×216 / 330* (FB 1300, door open) / 250×370×282 / 400* (FB 1400, door open) |
| Chamber Volume | 1.3 L (FB 1300) / 2.1 L (FB 1400) |
| Power Rating | 1060 W |
| Input Voltage/Frequency | 240 V, 50/60 Hz |
| Current Draw | 4.4 A (FB 1300) / 6.3 A (FB 1400) |
| Ramp Rate to Max Temp | 6–12°C/min |
| Thermal Insulation | High-Density Ceramic Fiber |
| Safety Features | Door-Interlocked Power Cut-off, Thermocouple Fault Protection, Rear 9.5-mm Process Port |
| Net Weight | 9 kg (FB 1300) / 12.7 kg (FB 1400) |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Model | FB1300 / FB1400 |
| Temperature Range | 100–1100 °C |
| Chamber Volume | 1.3 L / 2.1 L |
| Insulation | Ceramic Fiber |
| Heating Element Layout | Top + Dual Side Mounting |
| Door Operation | Downward-Opening Hinged Door |
| Safety Interlock | Integrated Door-Activated Power Cut-off |
| Thermocouple Fault Protection | Automatic Heater Disengagement |
| Rear Port | 0.95 cm Diameter for External Sensor Integration |
| Control System | Digital Single-Setpoint Controller with Dual-Mode Display (Actual/Setpoint Temperature) |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | 4640040 |
| Instrument Type | Single-Channel Pipette |
| Automation Level | Manual |
| Channels | 1 |
| Volume Range | 10–100 µL |
| Accuracy | ±3.0% to ±0.8% (volume-dependent, per ISO 8655) |
| Brand | Thermo Fisher |
|---|---|
| Origin | Imported |
| Manufacturer | Thermo Fisher Scientific |
| Model | GenPure Pro |
| Purified Water Grade | ASTM Type I / ISO 3696 Grade 1 |
| Resistivity | 18.2 MΩ·cm at 25°C |
| TOC | 1–5 ppb |
| Microbial Count | < 0.001 EU/mL |
| Particles (>0.1 µm) | < 1 particle/mL |
| RNase | ≤ 0.003 ng/mL |
| DNase | ≤ 0.4 pg/µL |
| UV Wavelength | 185 nm / 254 nm |
| Conductivity Sensor Electrode Constant | 0.01 cm⁻¹ |
| Temperature Accuracy | ±0.1°C |
| Dispensing Accuracy | ±0.5% (0.01–65 L) |
| Data Logging | Last 4 weeks of system errors |
| Compliance | ASTM D1193, ISO 3696, CLSI, USP <645>, GLP |