Gas Generator & Processing
Filter
Showing 391–420 of 681 results
| Brand | Parker DH |
|---|---|
| Origin | United Kingdom |
| Model | HFX |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 40–1200 L/min |
| Output Pressure | 4–10 bar |
| Nitrogen Purity | 95–99.5% |
| Dew Point | −50 °C |
| Brand | Parker DH |
|---|---|
| Origin | United Kingdom |
| Model | LCMS20-0 |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) |
| Output Flow Rate | 20 L/min |
| Output Pressure | 100 psi (7 bar) |
| Nitrogen Purity | ≥99.9% |
| Dew Point | −40 °C |
| Dimensions (W×H×D) | 510×705×555 mm |
| Weight | 89 kg |
| Compressor Integration | Air-integrated (LCMS20-1 variant available) |
| Compliance | ISO 9001 certified design, CE marked, compliant with IEC 61010-1 for laboratory equipment safety |
| Brand | Parker |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 20H / 40H / 60H |
| Hydrogen Generation Principle | Pure Water Electrolysis |
| Output Flow Rate | 160–500 mL/min (model-dependent) |
| Output Pressure | 5–100 psi (adjustable) |
| Hydrogen Purity | ≥99.9999% |
| Power Consumption | 50 W (at nominal load) |
| Gas Outlet | 1/8″ Swagelok® compression fitting |
| Dimensions (W×H×D) | 245 × 643 × 724 mm |
| Weight | 34 kg |
| Dryer Type | Integrated desiccant-based purification module |
| Safety Certifications | CE, UKCA, UL-compliant design architecture |
| Compliance | Designed to meet ISO 8573-1:2010 Class 1 for gaseous impurities (H₂O, O₂, total hydrocarbons), compatible with GLP/GMP laboratory environments and FDA 21 CFR Part 11 data integrity requirements when integrated with validated software |
| Brand | Parker DH |
|---|---|
| Origin | United Kingdom |
| Model | G6 / G7 |
| Nitrogen Flow Rate | 0.6 L/min (G6), 3.0 L/min (G7) |
| Air Flow Rate | 1.5–3.0 L/min (G6), 3.0 L/min (G7) |
| Nitrogen Purity | ≥99.999% |
| Dew Point (Air) | ≤–40 °C |
| Outlet Pressure | 5 bar |
| Dimensions (W×H×D) | 345×842×413 mm (G6), 345×874×663 mm (G7) |
| Weight | 54 kg (G6), 80 kg (G7) |
| Integrated Oil-Free Compressor | Yes |
| Brand | Parker DH |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | H-MD |
| Hydrogen Generation Principle | Deionized Water Electrolysis |
| Hydrogen Purity | 99.99995% |
| Power Consumption | 100 W |
| Flow Rates | 160 / 250 / 500 / 1100 mL/min |
| Dryer Technology | Regenerable Dual-Column Micro Dryer |
| Moisture Content | <1 ppm |
| Safety | 7-Mode Fault Protection System |
| Compliance | ISO 9001 Certified Design |
| Brand | Parker Domnick Hunter DH |
|---|---|
| Origin | United Kingdom |
| Model | Hunter H |
| Hydrogen Generation Principle | Pure Water Electrolysis |
| Output Pressure | 5–100 psi |
| Hydrogen Purity | >99.99995% |
| Power Consumption | 100 W |
| Certifications | CE, UL |
| Water Reservoir Capacity | 5 L |
| Continuous Operation | 24/7, 365 days/year |
| Safety Features | Automatic H₂ Leak Detection, Water Level & Conductivity Monitoring, Self-Diagnostic System, Eco-Friendly Filter |
| Optional | Auto-Refill Function |
| Compliance | ISO 9001 certified manufacturer |
| Brand | Parker Domnick Hunter |
|---|---|
| Origin | United Kingdom |
| Model | LCMS64/65 (Hunter Series) |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) with Carbon Molecular Sieve |
| Output Flow Rate | 18 L/min |
| Output Pressure | 7 bar |
| Nitrogen Purity | >99.999% (for collision gas stream) |
| Dew Point | −40 °C |
| Certifications | CE, UL |
| Compliance | ISO 9001 certified manufacturing |
| Phthalate-Free Construction | Yes |
| Integrated Oil-Free Compressor | Yes |
| Control Interface | LCD microprocessor-based controller |
| Monitoring | Five inline pressure gauges |
| Maintenance Alerts | Automated system diagnostics and service prompts |
| Brand | Parker DH |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NITROSOURCE PSA |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) |
| Output Flow Rate | 55–2600 L/min |
| Output Pressure | 4–11 bar |
| Nitrogen Purity | 95%–99.9995% |
| Dew Point | −40 °C |
| Brand | Supelco |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 18L |
| Flow Rate | 18 L/min |
| Output Pressure | 7 bar (100 psig) |
| Nitrogen Purity | 99.5% |
| Dew Point | ≤ −50 °C |
| Inlet Air Pressure | 8.5 bar (125 psig) |
| Power Supply | 110 VAC, 50–60 Hz, 50 W |
| Dimensions (H×W×D) | 84 × 36 × 46 cm |
| Weight | 75 kg |
| Connection | 1/4" Swagelok® |
| Technology | Pressure Swing Adsorption (PSA) with Carbon Molecular Sieve (CMS) |
| Compressor | Integrated oil-free air compressor |
| Brand | Parker DH |
|---|---|
| Origin | United Kingdom |
| Model | UHP-10ZA-S, UHP-35ZA-S, UHP-50ZA-S, UHP-75ZA-S, UHP-150ZA-S, UHP-200ZA-S, UHP-300ZA-S |
| Hydrocarbon Content | < 0.1 ppm |
| Output Flow Rate | 1.0–30.0 L/min |
| Dew Point | ≤ –40 °C (typical, after integrated drying) |
| Inlet Connection | 1/8″ or 1/4″ Swagelok® |
| Outlet Connection | 1/8″ or 1/4″ Swagelok® |
| Dimensions (W×H×D) | 340 × 455 × 425 mm (UHP-10ZA-S to UHP-75ZA-S) |
| Weight | 10.2–14.2 kg |
| Filtration Stages | OIL-X EVOLUTION A0 (coalescing), catalytic oxidation unit, OIL-X EVOLUTION AA (0.01 µm final particulate) |
| Brand | Parker DH |
|---|---|
| Origin | United Kingdom |
| Model | UHPN2-550C-E / UHPN2-750C-E / UHPN2-1500C-E / UHPN2-3000C-E |
| Nitrogen Purity | >99.9995% |
| Flow Rate | 0.55–3.0 L/min |
| Outlet Pressure | 5–7 bar (adjustable) |
| Integrated Oil-Free Compressor | Yes |
| Air Inlet Requirement (for non-C models) | 3–11.7 L/min @ 9 bar |
| Dimensions (W×H×D) | 345×869×417 mm (UHPN2-550/750-C) / 345×869×667 mm (UHPN2-1500/3000-C) |
| Weight | 44–93 kg |
| Compliance | ISO 9001 certified design, CE marked, meets IEC 61000-6-3/6-4 EMC requirements |
| Brand | Parker Domnick Hunter |
|---|---|
| Origin | United Kingdom |
| Model | UHPN2 |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) |
| Output Flow Rate | 1 L/min |
| Output Pressure | 100 psi (5 bar) |
| Nitrogen Purity | >99.9995% |
| Dew Point | −62 °C |
| Hydrocarbon Content | <0.1 ppm |
| Particulate Class | ISO 8573-1:2010 Class 2 |
| Certifications | CE, UL |
| Compressor Type | Integrated Oil-Free Modular Air Compressor |
| Control Interface | LCD Microprocessor Controller |
| Operating Mode | ECO Adaptive Demand-Based Operation |
| Regeneration | Fully Auto-Regenerating PSA System |
| Molecular Sieve Technology | Snowstorm™ Packing |
| Noise Reduction | Acoustically Enclosed Compressor Housing |
| Monitoring | Three Independent Pressure Gauges |
| Maintenance Alert | Real-Time Predictive Maintenance Notification |
| Brand | Parker |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | UHPZN2-1000C-E |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) |
| Output Flow Rate | 1.0 L/min |
| Output Pressure | 5–7 bar (adjustable) |
| Nitrogen Purity | ≥99.9995% (v/v) |
| Hydrocarbon Content | <0.1 ppm (as CH₄ equivalent) |
| Dew Point | ≤–70 °C (at 5 bar) |
| Integrated Oil-Free Compressor | Yes |
| Dimensions (W×H×D) | 534 × 586 × 966 mm |
| Weight | 79.6 kg |
| Brand | Parker |
|---|---|
| Origin | USA |
| Model | FID-2500 |
| Output Purity | 99.9995% H₂ |
| Zero Air THC | <0.1 ppm |
| Capacity | Supports up to 11 FID detectors |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Dimensions | 483 × 584 × 356 mm (W × D × H) |
| Weight | 42 kg |
| Compliance | CE, UL 61010-1, ISO 8573-1 Class 1 for compressed air feed |
| Brand | Parker |
|---|---|
| Origin | USA |
| Model | MGG-400 |
| Gas Purity | <0.05 ppm THC (as methane) |
| Output Capacity | Sufficient for 5–6 FID detectors |
| Regulatory Compliance | Designed for GLP/GMP-aligned laboratories |
| Noise Level | <45 dB(A) |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Dimensions | 43.2 × 48.3 × 27.9 cm (W×D×H) |
| Weight | 22.7 kg |
| Brand | Parker |
|---|---|
| Origin | USA |
| Model Series | NitroFlow Lab, N2-04 / N2-14 / N2-22 / N2-35 / N2-45 / N2-80 / N2-135 |
| Flow Rate Range | 4–467 L/min |
| Nitrogen Purity | ≥99.5% (standard models), up to 99.999% (LCMS-SF series) |
| Technology | Hollow-Fiber Membrane Separation |
| Power Requirement | None (for air-fed split-system configurations) |
| Compliance | Phthalate-free, VOC-free, MS-compatible design |
| Brand | Parker |
|---|---|
| Origin | USA |
| Model | TOC-1250 |
| Gas Output Purity | < 0.1 ppm HC, < 0.5 ppm CO₂ |
| Flow Rate | Up to 12 L/min |
| Operating Pressure | 5–10 bar (adjustable) |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Dimensions (W×D×H) | 320 × 500 × 580 mm |
| Weight | 28 kg |
| Compliance | CE, UL 61010-1, ISO 8573-1 Class 1 for hydrocarbons and CO₂ |
| Brand | Parker |
|---|---|
| Origin | USA |
| Model | UHPN2-1100UK / HPN2-2000UK |
| Flow Rate | 1.1 L/min (UHPN2-1100UK), 2.0 L/min (HPN2-2000UK) |
| Purity | 99.9999% (UHPN2-1100UK), 99.99% (HPN2-2000UK) |
| Input | Compressed Air |
| Certification | CE, UKCA, ISO 9001-compliant design |
| Dimensions | Compact benchtop footprint (<450 mm W × 400 mm D × 500 mm H) |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Pd-300 |
| Pricing | Upon Request |
| Feed H₂ Purity | >99% |
| Ultra-High-Purity H₂ Output | >99.99999% |
| Feed Gas Pressure Range | 0–1 MPa |
| Purified H₂ Delivery Pressure | 0–0.6 MPa |
| Power Supply | 220 V ±10%, 50–60 Hz |
| Power Consumption | 250 W |
| Operating Temperature | 350 °C |
| Ambient Operating Temperature | 1–40 °C |
| Ambient Relative Humidity | <85% RH |
| Dimensions (W×D×H) | 340 × 200 × 360 mm |
| Net Weight | ~6 kg |
| Brand | PEAK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Collision Gas Add-on |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) |
| Output Flow Rate | 200 cc/min |
| Output Pressure | 80 psi |
| Nitrogen Purity | 99.999% |
| Brand | PEAK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Category | Imported |
| Model | GENIUS 1025 |
| Nitrogen Generation Principle | Membrane Separation |
| Nitrogen Flow Rate | 15 L/min |
| Air Flow Rate | 35 L/min |
| Nitrogen Output Pressure | 80 psi |
| Air Output Pressure | 110 psi |
| Nitrogen Purity | Up to 99.5% |
| Nitrogen Dew Point | −40 °C |
| Brand | PEAK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Genius 3051 |
| Gas Output | 26 L/min high-purity nitrogen (N₂) and 20 L/min dried compressed air |
| Outlet Pressure | 100 psi |
| Input Power | 230 VAC ±10%, 50/60 Hz, 12 A |
| Dimensions (H×W×D) | 1322 × 600 × 850 mm |
| Weight | 216 kg |
| Integrated Oil-Free Compressor | Yes |
| Certification | Shimadzu-validated for LCMS-8050 & LCMS-8060 operation |
| Brand | PEAK |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Regional Category | Domestic (China) |
| Model | Genius AE 1024 |
| Pricing | Upon Request |
| Nitrogen Generation Principle | Membrane Separation (MEM) |
| Brand | PEAK |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Regional Classification | Domestic (China) |
| Model | Genius AE 24 |
| Nitrogen Generation Principle | Hollow Fiber Membrane Separation (MEM) |
| Output Flow Rate | 24 L/min |
| Output Pressure | 116 psi |
| Nitrogen Purity | 99.5 % |
| Integrated Air Compressor | Yes |
| Form Factor | Benchtop / Under-Bench |
| HMI Interface | External Touchscreen Display |
| Warranty | 12-Month On-Site Comprehensive Coverage |
| Brand | PEAK |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Regional Category | Domestic (China) |
| Model | Genius AE 32 |
| Instrument Type | Nitrogen Generator |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 32 L/min |
| Output Pressure | 116 psi |
| Nitrogen Purity | 99.5% |
| Dew Point | -40 °C |
| Warranty | 1-Year Comprehensive Factory Warranty |
| Brand | PEAK |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Genius AE 68 |
| Instrument Type | Nitrogen Generator |
| Nitrogen Generation Principle | Hollow Fiber Membrane Separation (MEM) |
| Output Flow Rate | 68 L/min |
| Output Pressure | 116 psi |
| Nitrogen Purity | 99.5% |
| Integrated Air Compressor | Yes |
| Control Interface | External HMI Touchscreen |
| Warranty | 12-month on-site comprehensive warranty |
| Compliance | Designed to meet ISO 8573-1 Class 2:2:2 compressed air quality requirements for instrument-grade nitrogen supply |
| Brand | PEAK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Genius SQ 24 |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 24 L/min |
| Output Pressure | 116 psi (max at 22 L/min) |
| Nitrogen Purity | Up to 99.5% |
| Dew Point | –50 °C |
| Brand | PEAK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Category | Imported Instrument |
| Model | Genius SQ |
| Nitrogen Generation Principle | Hollow-Fiber Membrane Separation |
| Output Flow Rate | 24 L/min |
| Output Pressure | 116 psi (max at 22 L/min) |
| Nitrogen Purity | Up to 99.5% N₂ |
| Dew Point | −50 °C |
| Certification | CE Marked |
| Integrated Air Compressor | Yes |
| Footprint | Benchtop-Under-Counter Design |
| Service & Support | Peak Protected Global Field Service, Technical Support, and Application Training |
| Brand | PEAK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Imported |
| Model | Genius XE |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 35 L/min (Genius XE 35) / 70 L/min (Genius XE 70) |
| Output Pressure | 116 psi |
| Nitrogen Purity | Up to 99.5% |
| Nitrogen Dew Point | < −50 °C |
| Brand | PEAK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Genius XE SCI 2 |
| Pricing | Available Upon Request |