Gas Generator & Processing
Filter
Showing 181–210 of 668 results
| Brand | Chengmeng Weiye |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CM-20V |
| Compression Principle | Piston |
| Flow Rate | 0–20 L/min |
| Operating Pressure | 0–0.4 MPa |
| Dew Point | 3 °C |
| Particle Filtration Size | 0.01 µm |
| Pressure Stability | <0.002 MPa |
| Noise Level | <35 dB(A) |
| Input Voltage | 220 V, 50 Hz |
| Power Consumption | 450 W |
| Dimensions | 460 × 320 × 550 mm |
| Net Weight | 32 kg |
| Brand | Chengmeng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | CM-30L Dedicated Nitrogen Generator for Nitrogen Evaporation Systems |
| Instrument Type | Nitrogen Generator |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) with Twin-Tower CMS System |
| Output Flow Rate | 0–32 L/min |
| Output Pressure | 0.6–0.8 MPa |
| Nitrogen Purity | 99–99.9% |
| Dew Point | < −10 °C |
| Power Supply | 220 V, 50 Hz |
| Power Consumption | 800 W |
| Dimensions (W×D×H) | 1100 × 800 × 1000 mm |
| Weight | 150 kg |
| Operating Temperature | 5–40 °C (Optimal: 20–25 °C) |
| Relative Humidity | ≤80% RH |
| Compressed Air Requirement | Oil-free, dew point < −10 °C, oil content < 0.01 ppm, pressure 0.6–0.8 MPa |
| Brand | CHNTECH |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | THA3L |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Oxidation |
| Output Flow Rate | 0–3 L/min |
| Output Pressure | 0–0.4 MPa |
| Hydrocarbon Content | < 0.1 ppm (non-detectable by FID) |
| Dew Point | ≤ –40 °C (at 0.4 MPa) |
| Noise Level | ≤ 42 dB(A) |
| Power Supply | 220 V AC, 50 Hz |
| Operating Temperature | 15–40 °C |
| Relative Humidity | ≤ 70 % RH (non-condensing) |
| Power Consumption | 150 W |
| Dimensions (L×W×H) | 470 × 240 × 380 mm |
| Weight | 23 kg |
| Brand | Chu Ding Technology |
|---|---|
| Origin | Shanghai, China |
| Model | QL-150 / QL-300 / QL-500 |
| Purity | >99.999% H₂ |
| Output Flow | 0–310 mL/min |
| Output Pressure | 0.02–0.4 MPa |
| Power Supply | 220 V ±15%, 50–60 Hz |
| Max Power Consumption | 150 W |
| Dimensions (W×D×H) | 500 × 270 × 420 mm |
| Water Reservoir Volume | 3.2 L |
| Water Consumption | 14.46 g/h |
| Feed Water Resistivity Requirement | ≥1 MΩ·cm |
| Housing Material | High-grade engineering plastics |
| Electrode Architecture | Zero-gap SPE catalytic electrode with integrated ion-exchange membrane |
| Brand | Chu Ding Technology |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XYH-500 |
| Price | USD 1,120 (FOB Shanghai) |
| Hydrogen Purity | 99.9999% |
| Flow Rate | 0–500 mL/min |
| Output Pressure | 0–0.5 MPa (factory-set at 0.3 MPa) |
| Power Consumption | 150 W |
| Pressure Stability | < 0.0001 MPa |
| Warranty | 1-year system warranty, 3-year electrolyzer warranty |
| Brand | Chu Ding Technology |
|---|---|
| Origin | Shanghai, China |
| Model | XYT-300 / XYT-500 / XYT-300G / XYT-500G |
| Nitrogen Purity | O₂ < 3 ppm, Dew Point < −70 °C |
| Nitrogen Flow | 0–500 mL/min |
| Nitrogen Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Hydrogen Purity | 99.999% |
| Hydrogen Flow | 0–500 mL/min |
| Hydrogen Pressure | 0–0.4 MPa (factory-set at 0.3 MPa) |
| Air Flow | 0–5000 mL/min |
| Air Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Dimensions | 460 × 440 × 370 mm |
| Max Power Consumption | 450 W |
| Brand | Chu Ding Technology |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XYT-300 |
| Price | USD 2,750 (FOB Shanghai) |
| Nitrogen Purity | O₂ < 3 ppm, Dew Point < −70 °C |
| Nitrogen Flow | 0–300 mL/min |
| Nitrogen Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Hydrogen Purity | 99.999% |
| Hydrogen Flow | 0–300 mL/min |
| Hydrogen Pressure | 0–0.4 MPa (factory-set at 0.3 MPa) |
| Air Flow | 0–2000 mL/min |
| Air Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Dimensions | 460 × 440 × 370 mm |
| Max Power Consumption | 400 W |
| Electrolyzer Warranty | 3 years |
| System Warranty | 1 year |
| Brand | Chengmeng Technology |
|---|---|
| Origin | Beijing, China |
| Model | CM-30LB |
| Output Flow | 0–30 L/min |
| Output Pressure | 116 psi (adjustable) |
| Nitrogen Purity | 95–99.9% |
| Dew Point | −10°C |
| Particle Size Limit | <0.01 µm |
| Total Power | 1.3 kW |
| Noise Level | ≤58 dB(A) |
| Dimensions (L×W×H) | 800×500×750 mm |
| Weight | 130 kg |
| Input Power | 220 V ±10%, 50 Hz |
| Operating Ambient | Temp ≤30°C, RH ≤60% |
| Brand | Coolium |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CT6-100 |
| Cooling Temperature | −110 °C |
| Cold Trap Volume | 4 L |
| Cold Trap Dimensions | Ø160 × 200 mm |
| Cooling Method | Air-Cooled |
| Weight | 77 kg |
| Power Supply | 220 V / 50 Hz / 1.4 kW |
| Overall Dimensions | 500 W × 650 D × 430 H mm |
| Material | Stainless Steel (optional PTFE-coated inner surface) |
| Optional Accessories | Glass condensate collection flask, corrosion-resistant lid variants (for aqueous, acidic, or organic vapor streams), drain valve for condensate removal |
| Brand | Coolium |
|---|---|
| Model | CT9-100 |
| Minimum Operating Temperature | ≤ −100 °C |
| Cold Trap Volume | 9 L |
| Cold Trap Chamber Dimensions | Ø220 mm × 250 mm |
| Cooling Method | Air-Cooled |
| Power Supply | 220 V / 50 Hz / 1.3 kW |
| Unit Weight | 95 kg |
| Overall Dimensions | 440 mm (W) × 520 mm (D) × 880 mm (H) |
| Compliance | CE-marked design principles, compatible with ISO 8573-1 Class 1 compressed air quality requirements for critical gas purification workflows |
| Brand | Delite |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | A201 |
| Hydrogen Generation Principle | Pure Water Electrolysis |
| Output Flow Rate | 600 mL/min |
| Output Pressure Range | 43–116 psi (0.3–0.8 MPa) |
| Hydrogen Purity | ≥99.9995% |
| Power Consumption | 100 W |
| Net Weight | ~5 kg |
| Dimensions (L×W×H) | 400 × 280 × 360 mm |
| Flow Display | Yes |
| Pressure Display | Yes |
| Low-Water Protection | Yes |
| Dual-Stage Pressure Control | Photocell Pressure Sensor + Mechanical Pressure Switch |
| Quick Purge Valve | Yes |
| Integrated Moisture & Oxygen Removal | Yes |
| LED-Lit Water Level Indicator | Yes |
| Removable Purification Cartridge | Yes |
| Liquid Trap in Gas Path | Yes |
| Brand | Dürr Technik |
|---|---|
| Origin | Germany |
| Compressor Type | Piston |
| Flow Rate | 0–78 L/min |
| Operating Pressure | 0–10 bar |
| Dew Point | Optional Desiccant Drying |
| Filtration Grade | 0.01 µm or 0.1 µm (selectable) |
| Air Receiver Volume | 55 L |
| Configuration | Modular Multi-Head Mounting Platform |
| Brand | Durr Technik |
|---|---|
| Origin | Germany |
| Type | Imported |
| Model | PAG-132 |
| Compression Principle | Piston-Type |
| Flow Rate | 0–132 L/min |
| Operating Pressure | 0–10 bar |
| Filtration Grade | 0.01 µm or 0.1 µm particulate removal |
| Brand | JKRD |
|---|---|
| Origin | USA |
| Model | CGH2-160 |
| Hydrogen Production Principle | Pure-water electrolysis |
| Output Flow Rate | 160 mL/min (up to 1300 mL/min customizable) |
| Output Pressure | 11.9 bar (0–100 psi) |
| Hydrogen Purity | 99.999995% |
| Dimensions | 40 × 40 × 45 cm |
| Weight | 23 kg |
| Power Supply | 220 V, 50 Hz |
| Certifications | CSA, UL, IEC 61010, CE |
| Brand | Eranntex |
|---|---|
| Origin | Shenzhen, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | MIC-300-H2 |
| Hydrogen Generation Principle | Electrochemical & Thermal Conductivity |
| Output Flow Rate | 600 mL/min |
| Output Pressure | 0–100 ppm (Note: This is a typographical inconsistency in source |
| Hydrogen Purity | 99.99% |
| Power Consumption | 100 W |
| Detection Principle (Transmitter) | Electrochemical & Thermal Conductivity |
| Measurement Range | 0–100 ppm / 0–1000 ppm / 0–50,000 ppm / 0–100% LEL / 0–99.99% vol (configurable) |
| Resolution | 0.01 ppm (0–100 ppm), 0.1 ppm (0–1000 ppm), 1 ppm (>1000 ppm), 0.01% vol |
| Accuracy | ≤±3% FS |
| Response Time (T90) | ≤30 s |
| Operating Temperature | −40°C to +70°C |
| Humidity Range | 10–95% RH (non-condensing) |
| Output Signals | 4–20 mA (3-wire), RS485 Modbus RTU, optional 0–5 V / 0–10 V / 1–5 V |
| Explosion Protection | Ex d IIC T6 Gb (Certificate No.: CNEx17.3959) |
| IP Rating | IP65 |
| Dimensions (L×H×W) | 203×180×65 mm (without beacon) |
| Weight | 1.0 kg |
| Brand | Eranntex |
|---|---|
| Model | MS500-O2 |
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Detection Principle | Electrochemical (standard for O₂), optional IR/PID/catalytic bead/thermal conductivity |
| Detection Range | 0–10 ppm / 0–100 ppm / 0–1000 ppm / 0–200% vol (customizable) |
| Resolution | 0.001 ppm (0–10 ppm), 0.01 ppm (0–100 ppm), 0.1 ppm (0–1000 ppm), 1 ppm (>1000 ppm), 0.01 mg/L (0–200 mg/L), 0.01% vol |
| Accuracy | ≤±2% FS (higher accuracy available upon customization) |
| Operating Temperature | −40 °C to +70 °C (with ±0.5 °C temperature measurement accuracy, optional) |
| Humidity Measurement | 0–100% RH (±3% RH accuracy, optional) |
| Sampling Method | Integrated pump suction (500 mL/min), extendable sampling distance >10 m |
| Display | 2.5″ 320×240 color TFT screen |
| Data Storage | 100,000 records (expandable) |
| Communication | USB, RS232, Bluetooth (optional) |
| Power Supply | Rechargeable 3.7 V / 6000 mAh Li-polymer battery with overcharge/overdischarge/short-circuit/overtemperature protection |
| Enclosure Rating | IP66 |
| Explosion Protection | Exia II CT4 (intrinsic safety) |
| Dimensions | 195 × 77 × 46 mm (L×W×H) |
| Weight | 350 g |
| Brand | ErreDue |
|---|---|
| Origin | Italy |
| Model | GEMINI T6 |
| Oxygen Purity | 90–95% |
| Oxygen Flow Rate | 5.25–7.5 NL/min |
| Output Pressure | 0.1–10 bar |
| Operating Temperature | 4–40 °C |
| Dimensions (W×H×D) | 370 × 710 × 590 mm |
| Power Supply | 110–120 V / 60 Hz or 220–240 V / 50 Hz |
| Interface | Ethernet & RS-485 |
| Display | 3.5-inch touchscreen |
| Origin | Finland |
|---|---|
| Type | PSA (Pressure Swing Adsorption) Nitrogen Generator |
| Model | UHP NGC-05L / NGC-1L / NGC-2L / NGC-3L / NGC-5L / NGC-10L / NGC-16L |
| Nitrogen Purity | Up to 99.9995% (NGC-05L–NGC-5L) |
| Dew Point | -15 °C to -70 °C (flow-dependent) |
| Air Inlet Pressure | 7–10 barg |
| Power Supply | 230 V, 50 Hz |
| Noise Level | <55 dB(A) at 1 m |
| Rated Power | 8 W |
| Dimensions (W×D×H) | 320×482×820 mm (single unit) |
| Weight | 42–114 kg (model-dependent) |
| Air Inlet Requirement | 2–20 LPM @ 20 °C, dew point ≤ (P+4) °C |
| Outlet Connection | 4 mm or 6 mm compression fitting |
| Brand | FUXIA |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | FX-BX-15G |
| Pricing | Available Upon Request |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | GCD-1000 |
| Quotation | Upon Request |
| Purity | 99.999% H₂ |
| Flow Rate | 0–1000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.001 MPa |
| Power Supply | 220 V ±10%, 50 Hz |
| Power Consumption | 400 W |
| Dimensions (W×D×H) | 460 × 370 × 360 mm |
| Net Weight | ~20 kg |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GCD-4300 |
| Pricing | Available Upon Request |
| Deuterium Purity | Dependent on Feedstock Heavy Water Purity |
| Flow Rate | 0–300 mL/min |
| Operating Pressure | 0–0.4 MPa |
| Power Consumption | 150 W |
| Dimensions (W×D×H) | 360 × 200 × 260 mm |
| Net Weight | ~10 kg |
| Output Flow | 0–5000 mL/min @ 0.4 MPa |
|---|---|
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Noise Level | < 35 dB(A) |
| Power Consumption | 275 W |
| Input Voltage | 220 V ±10% |
| Dimensions (W×D×H) | 480 × 260 × 350 mm |
| Net Weight | ~25 kg |
| Operating Environment | 0–45 °C, RH ≤85% (non-dusty, non-corrosive atmosphere) |
| Compliance | Designed for ISO/IEC 17025-compliant labs |
| Output Flow | 0–8000 mL/min @ 0.4 MPa |
|---|---|
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Noise Level | < 35 dB(A) |
| Power Consumption | 300 W |
| Input Voltage | 220 V ±10% |
| Dimensions (W×D×H) | 480 × 260 × 350 mm |
| Net Weight | ~25 kg |
| Operating Environment | 0–45 °C, RH ≤85% (non-dusty, non-corrosive atmosphere) |
| Compliance | Designed for ISO/IEC 17025-compliant labs and GLP/GMP environments |
| Brand | Zhongxing Huili |
|---|---|
| Origin | Beijing, China |
| Model | GH-400 |
| Output Flow Rate | 0–300 mL/min |
| Maximum Output Pressure | 0.3 MPa |
| Electrolyte System | Plate-type Alkaline Electrolyzer |
| Flow Control | Automatic Flow Tracking |
| Display | Digital LED |
| Filtration Stages | Dual-stage (Particulate + Desiccant) |
| Electrolyte Reservoir | Large-capacity |
| Anti-Backflow Design | Integrated Alkali-Backflow Prevention Mechanism |
| Price | USD 980 (FOB Beijing) |
| Origin | Europe |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | GMS150 |
| Price Range | USD 7,000 – 14,000 |
| Brand | Zhongxing Huili |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GN-300 |
| Nitrogen Purity | 99.995% |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0–0.4 MPa |
| Max Power Consumption | 150 W |
| Dimensions (W×D×H) | 320 × 180 × 350 mm |
| Net Weight | 10 kg |
| Brand | Guolin Health Technology |
|---|---|
| Origin | Shandong, China |
| Model | CFG-GL-40 Advanced Edition |
| Ozone Output | 0–40 g/h |
| Adjustable Ozone Concentration | 20–170 mg/L |
| Feed Gas | High-Purity Oxygen (≥99.999%) |
| Generation Principle | Dielectric Barrier Discharge (DBD) |
| Construction Materials | Semiconductor-Grade PTFE & Electropolished 316L Stainless Steel |
| Dimensions (W×D×H) | 340 × 190 × 410 mm |
| Control Accuracy | ±1.0% of setpoint (S.P.), ±0.35% of full scale (F.S.) |
| Pressure Regulation Range | 0.4–1.0 bar |
| Interface | OLED Touchscreen + Modbus RTU/TCP/IP |
| Power Supply | 220 V AC, 500 W |
| Compliance | Designed for ISO/IEC 17025-compliant labs |
| Brand | Guolin Health |
|---|---|
| Origin | Shandong, China |
| Model | GL-AD-T-400S |
| Rated Ozone Output | 0–10 g/h |
| Rated Power | 400 W |
| Dimensions | 403 × 235 × 375 mm |
| Cooling Method | Air + Water Cooling |
| Ozone Output Stability | <20% decay over 24 h continuous operation |
| Construction | Stainless steel housing with multi-stage gas filtration |
| Remote Control | Wi-Fi-enabled via mobile app (internet connection required) |
| Compliance | Designed to meet ISO 14644 cleanroom support requirements and GMP-aligned environmental control practices |
| Hydrogen Purity | 99.999% |
|---|---|
| Hydrogen Flow Rate | 0–500 mL/min |
| Hydrogen Output Pressure | 0.4 MPa |
| Air Flow Rate | 0–2000 mL/min |
| Air Output Pressure | 0.4 MPa |
| Power Consumption | 275 W |
| Dimensions (W×D×H) | 470 × 260 × 380 mm |
| Net Weight | 28 kg |
| Brand | Haileong |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HLH-500II |
| Price Range | USD 1,400–2,800 (FOB Shanghai) |
| Hydrogen Generation Principle | PEM-free Alkaline Electrolysis of Deionized Water |
| Output Flow Rate | 0–500 mL/min |
| Output Pressure | 0–0.4 MPa (factory-set at 0.3 MPa) |
| Hydrogen Purity | 99.999% (v/v, measured by online thermal conductivity detection) |
| Power Consumption | 200 W |
| Pressure Stability Accuracy | < 0.0001 MPa |
| Electrolyte | KOH solution (single-fill design, replenishment only with distilled/deionized water) |
| Gas Path Material | Electropolished 316L stainless steel tubing, ultrasonically cleaned |
| Safety Features | Dual-stage overpressure cutoff, anti-backflow valve, real-time leak monitoring |
| Warranty | 1-year full system |