Gas Generator & Processing
Filter
Showing 121–150 of 681 results
| Brand | Boante |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| CO₂ Control Range | Ambient +100 ppm to 2000 ppm |
| O₂ Control Range (MGAR-G) | 0–21% vol |
| (MGAR-D) | 21–100% vol |
| CO₂ Detection Accuracy | ±1 ppm |
| O₂ Detection Accuracy | ±0.1% vol |
| CO₂ Control Precision | ±3% of setpoint |
| O₂ Control Precision | ±5% of setpoint |
| CO₂ Sensor | NDIR with Vaisala CARBOCAP® module |
| O₂ Sensor | Electrochemical cell (RAE Systems) |
| N₂ Input Max Flow | 1.6 L/min |
| CO₂ Output Flow Range | 0.16–1.6 L/min (customizable up to 6 L/min) |
| O₂/Air Output Flow | Adjustable via calibrated rotameter |
| Mixing Chamber Pressure Range | −10 to +10 kPa |
| CO₂ Response Time (0→2000 ppm) | ≤5 s |
| O₂ Response Time (0→21%) | ≤15 s |
| CO₂ Regulation Response Time (100 ppm step) | 15 s |
| O₂ Regulation Response Time (1% step) | 15 s |
| Display | 7-inch capacitive touchscreen |
| Control Algorithm | PID + adaptive fuzzy logic |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Power Consumption | 200 W |
| Operating Temperature | 10–30 °C |
| Humidity Range | 30–80% RH (non-condensing) |
| Enclosure Material | Stainless steel with corrosion-resistant white epoxy coating |
| Calibration Interval | 12 months |
| Compatible Media | Freshwater, synthetic seawater, low-salinity and high-salinity seawater (≤45‰) |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | BORA Series (N2-BORA-500 / N2-BORA-1300) |
| Purity | 99.999%+ (N2-BORA-500) or 99.995% (N2-BORA-1300) |
| Residual O₂ | <10 ppm (N2-BORA-500) or <50 ppm (N2-BORA-1300) |
| Flow Rate | 500 mL/min or 1300 mL/min |
| Integrated Oil-Free Compressor | Yes |
| Compliance | ISO 9001 certified |
| Maintenance Interval | Filter & Silencer replacement every 4,000 operating hours |
| Operating Pressure | Low-pressure ambient system (no high-pressure cylinders or cryogenic storage) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | DH-300 |
| Quotation | Available Upon Request |
| Hydrogen Purity | 99.99999% |
| Flow Rate | 0–300 mL/min |
| Output Pressure | 0–0.5 MPa |
| Pressure Stability | < 0.0001 MPa |
| Power Supply | 220 V ±10%, 50 Hz |
| Power Consumption | 300 W |
| Dimensions (W×D×H) | 380 × 200 × 370 mm |
| Net Weight | ~15 kg |
| Key | Purity <3 ppm O₂, Dew Point −56°C, Flow 0–1000 mL/min, Output Pressure 0–0.4 MPa, Pressure Stability <0.003 MPa (air-source dependent), Power 220 V ±10%, 50 Hz, 300 W, Operating Temp 1–40°C, RH <85%, Dimensions 460 × 360 × 350 mm, Net Weight ~20 kg |
|---|
| Hydrogen Purity | 99.999% |
|---|---|
| Flow Rate | 0–500 mL/min |
| Output Pressure | 0–0.4 MPa / 0–0.6 MPa (dual-range adjustable) |
| Pressure Stability | < 0.001 MPa |
| Power Supply | 220 V ±10%, 50 Hz |
| Power Consumption | 250 W |
| Dimensions | 370 × 330 × 180 mm |
| Net Weight | ~11 kg |
| Brand | BUCHI |
|---|---|
| Origin | Switzerland |
| Manufacturer | BUCHI AG |
| Type | Imported |
| Model | K-415 |
| Pricing | Available Upon Request |
| Brand | Chineasy |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | CEH300 |
| Hydrogen Purity | 99.999% |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0–0.4 MPa |
| Power Supply | 220 V ±10%, 50/60 Hz |
| Max. Power Consumption | 120 W |
| Dimensions (L×W×H) | 380 × 180 × 360 mm |
| Weight | 10 kg |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | AEOLUS |
| Nitrogen Generation Principle | Hollow Fiber Membrane Technology |
| Output Flow Rates | 40, 80, or 120 L/min per module (scalable via modular combination) |
| Output Pressure | 7.6 bar |
| Nitrogen Purity | 99% |
| Dew Point | –40 °C |
| Compressed Air Inlet Requirement | 8.5–10 bar, oil-free and dry (ISO 8573-1 Class 1.3.1), dew point < –20 °C |
| Dimensions (H×W×D) | 324×265×120 mm (AEOLUS M), 400×265×120 mm (AEOLUS L), 480×265×120 mm (AEOLUS XL) |
| Weight | 25–27 kg |
| Air Inlet Connection | OD 10 mm or G1/4" |
| N₂ Outlet Connection | OD 6 mm or G1/4" |
| Brand | ChemTron |
|---|---|
| Model | AEOLUS |
| Type | Membrane-Based Nitrogen Generator Module |
| Output Pressure | 7.6 bar (108 psi) |
| Flow Options | 40 / 80 / 120 L/min (at 95–96% purity) |
| Purity Options | Up to 99% N₂ |
| Compressed Air Inlet | 8.5–10 bar, ISO 8573-1 Class 1.3.1 (oil-free, dew point ≤ –20 °C) |
| Ambient Operating Temperature | 15–35 °C |
| Noise Level | < 58 dB(A) |
| Dimensions (W × D × H) | 324 × 265 × 1204 mm |
| Weight | 25–27 kg |
| Air Inlet | OD 10 mm or G1/4" |
| N₂ Outlet | OD 6 mm or G1/4" |
| Mounting | Benchtop or Wall-Mountable |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | AEOLUS ZA30 |
| Zero-Air Flow Rate | 30 L/min @ 7.5 bar |
| Dry Oil-Free Air Flow Rate | 30 L/min @ 5.0 bar |
| Recommended Compressed Air Supply | 80 L/min @ 10 bar |
| Compressed Air Inlet Pressure | 8.5–10 bar |
| Compressed Air Quality | Oil-free, dry, dew point ≤ −20 °C (ISO 8573-1 Class 1.3.1) |
| Output Pressure | 7.6 bar |
| Maximum Pressure Drop | 1.5 bar |
| Ambient Temperature Range | 15–35 °C |
| Noise Level | < 58 dB(A) |
| Dimensions (W×D×H) | 324 × 265 × 1204 mm |
| Weight | 25 kg |
| Compressed Air Inlet | OD 10 mm or G1/4" |
| Zero-Air Outlet | OD 6 mm or G1/4" |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | AEOLUS ZA30 / AEOLUS ZA60 |
| Output Flow | 30 L/min or 60 L/min |
| Output Pressure | 7.6 bar / 108 psi |
| Compressed Air Input Requirement | 8.5–10 bar, oil-free and dry (pressure dew point ≤ −20 °C, ISO 8573-1 Class 1.3.1) |
| Noise Level | < 58 dB(A) |
| Ambient Temperature Range | 15–35 °C |
| Dimensions (L×W×H) | 490×220×625 mm (ZA30), 490×240×625 mm (ZA60) |
| Weight | 25 kg (ZA30), 27 kg (ZA60) |
| Compressed Air Inlet | OD 10 mm or G1/4" |
| Zero-Air Outlet | OD 6 mm or G1/4" |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | BLR |
| Output Pressure | 13 bar |
| Refrigerant | Eco-friendly (R-134a or equivalent) |
| Heat Exchanger Type | High-efficiency brazed plate-fin |
| Dew Point Range | +3 °C to +10 °C |
| Air Outlet Relative Humidity | ≤20% |
| Water Separation Efficiency | ≥99% |
| Inlet–Outlet Temperature Differential | ≤5 °C |
| Power Consumption Reduction vs. Shell-and-Tube | ~50% |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | EVO |
| Nitrogen Flow | ≤12 L/min at 80 psi (5.5 bar) |
| Air Flow (Zero Air) | ≤24 L/min at 100 psi (6.9 bar) |
| Exhaust Air | ≤8 L/min at 60 psi (4.1 bar) |
| N₂ Purity | 98–99.9% |
| Dew Point (atmospheric) | −40 °C |
| Pressure Stability | ±0.1 bar (±0.5%) |
| Power Supply | 110 V / 60 Hz or 230 V / 50 Hz |
| Power Consumption | 1800 W |
| Operating Temperature | 15–40 °C |
| Relative Humidity | 0–99% (with condensate removal above 80% RH) |
| Noise Level | <55 dB(A) |
| Display | 128 × 64 px graphical LCD |
| Enclosure Rating | IP2X |
| Dimensions (L×D×H) | 482 × 835 × 641 mm |
| Weight | 90 kg |
| Output Fittings | 1/4" compression or 6 mm push-to-connect |
| Certifications | CE |
| Brand | ChemTron |
|---|---|
| Origin | Switzerland |
| Model | EZA-1 / EZA-2 |
| Output Flow | 0–1000 mL/min (EZA-1), 0–2000 mL/min (EZA-2) |
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Filtration Precision | 5 µm |
| Power Consumption | ≤150 W (EZA-1), ≤200 W (EZA-2) |
| Operating Temperature | 1–40 °C |
| Relative Humidity | ≤85% RH |
| Dimensions (W×D×H) | 220×500×510 mm (EZA-1), 220×515×510 mm (EZA-2) |
| Weight | 15 kg (EZA-1), 20 kg (EZA-2) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | EZH 300 / EZH 600 |
| Hydrogen Generation Principle | Alkaline Water Electrolysis |
| Output Flow Rate | 0–350 mL/min (EZH 300) / 0–650 mL/min (EZH 600) |
| Output Pressure | 0–0.5 MPa |
| Hydrogen Purity | >99.999% |
| Power Consumption | ≤170 W (EZH 300) / ≤350 W (EZH 600) |
| Pressure Stability | <0.001 MPa |
| Dimensions (W×D×H) | 220 × 400 × 490 mm |
| Internal Reservoir Volume | 1 L |
| Weight | 14 kg |
| Operating Temperature | 1–40 °C |
| Relative Humidity | ≤85% RH |
| Gas Outlet Port | 3 mm OD tubing connection |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | FID FLAT NM |
| Hydrogen Generation Principle | PEM Electrolysis of Deionized Water |
| Output Flow Rate | 100–1350 mL/min |
| Output Pressure | 11 bar (160 psig) |
| Hydrogen Purity | 99.99996% |
| Water Reservoir Capacity | 7 L |
| Internal Gas Volume | <50 mL |
| Dimensions (W×D×H) | 690 × 680 × 150 mm |
| Weight | 41–45 kg |
| Power Consumption | 90–450 W |
| Operating Environment | 15–40 °C, 0–80% RH (non-condensing) |
| Certifications | CE, CSA, FCC |
| Display | 128×64-pixel LCD with tactile buttons |
| Noise Level | ≤46 dB(A) |
| Max Load Capacity | 80 kg |
| Gas Outlet | 1/8" Swagelock |
| Water Resistivity Requirement | ≥5 MΩ·cm (min. 1 MΩ·cm acceptable) |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | FID FLAT PG |
| Hydrogen Generation Principle | PEM Electrolysis of Deionized Water |
| Output Pressure | 11 bar (160 psig) |
| Hydrogen Purity | 99.9996% |
| Max Flow Rate | 250 mL/min |
| Water Reservoir Capacity | 7 L |
| Internal Gas Volume | < 50 mL |
| Dimensions (W×D×H) | 690 × 680 × 150 mm |
| Weight | 39 kg |
| Power Consumption | 115 W |
| Noise Level | ≤46 dB(A) |
| Certifications | CE, CSA, FCC |
| Compliance | Designed for GLP/GMP environments |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | FID TOWER NM |
| Hydrogen Generation Principle | Proton Exchange Membrane (PEM) Electrolysis of Ultrapure Water |
| Output Flow Rate | 5000 mL/min |
| Output Pressure | 11 bar |
| Hydrogen Purity | 99.99996% |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | FID TOWER PG |
| Hydrogen Purity | 99.9996% |
| Max H₂ Flow | 100–600 mL/min |
| Max H₂ Pressure | 11 bar |
| Water Reservoir | 5 L |
| Dimensions | 140 × 580 × 490 mm |
| Weight | 25–35 kg |
| Certifications | CE, CSA, FCC |
| Air Module Options | 1800 mL/min or 5000 mL/min zero-air output (<0.1 ppm HC & CO) |
| Dryer Technology | Static membrane + dual cold-regenerative purifiers |
| Electrolysis | CPEM proton exchange membrane + titanium CCEEL electrolyzer |
| Safety | Internal gas volume <50 mL, multi-point leak/pressure/temperature/conductivity monitoring |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | FID TOWER-PG / FID TOWER-NM |
| Output Flow Range | 100–1350 mL/min |
| Max Pressure | 11 bar (160 psig) |
| Purity | 99.99996% (NM), 99.9996% (PG) |
| Water Reservoir | 5 L |
| Internal Gas Volume | <50 mL |
| Dimensions | 140 × 580 × 490 mm (W×D×H) |
| Weight | 25–35 kg |
| Power | 110–120 V / 60 Hz or 220–240 V / 50 Hz |
| Operating Temp/Humidity | 15–40 °C, 0–80% RH (non-condensing) |
| Noise Level | ≤46 dB(A) |
| Gas Outlet | 1/8" Swagelock |
| Certifications | CE, CSA, FCC |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | GC MATE |
| Gas Purity | 99.9996% (H₂), 99.999% (N₂), >99.999% (Air after purification) |
| Output Flow | N₂: 4000 mL/min, H₂: 600 mL/min, Air: 5000 mL/min |
| Output Pressure | 11 bar (H₂), 5 bar (N₂), 7–10 bar (Air input required) |
| Design | Modular Split-System |
| Control Interface | Physical Keypad + LCD Display (128×64 pixels) |
| Certifications | CE, CSA, FCC |
| Compliance | Designed for GLP/GMP environments |
| Brand | ChemTron |
|---|---|
| Origin | Switzerland |
| Model | GC3000 |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Cracking |
| Output Flow Rate | 1.5–30 L/min |
| Output Pressure | 4.5–10 bar |
| Total Hydrocarbons (THC) | <0.05 ppm |
| Dew Point | −30 °C |
| Certifications | CE, CSA, FCC |
| Power Supply | 110–120 V / 60 Hz or 220–240 V / 50 Hz |
| Dimensions (H×W×D) | 410 × 550 × 230 mm |
| Weight | 12 kg |
| Inlet Connection | 1/4″ NPT |
| Outlet Connection | 1/8″ NPT |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | GH40L |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Cracking |
| Output Flow Rate | 0–40 L/min |
| Output Pressure | 0–9.5 bar |
| Total Hydrocarbon Content | <0.1 ppm (as methane equivalent) |
| Dew Point | +3 °C |
| Particle Filtration Efficiency | ≥99.9999% at 0.01 µm |
| Internal Tank Material | Electropolished Stainless Steel (AISI 316L) |
| Safety Features | Thermal Cut-off Switch, Spring-Loaded Pressure Relief Valve, Digital Pressure Switch with Adjustable Setpoints |
| Noise Level | ≤58 dB(A) |
| Power Consumption | 1200 W |
| Dimensions (W×D×H) | 470 × 700 × 770 mm |
| Weight | 72 kg |
| Inlet Filtration | Pre-filter for particulates and ambient dust |
| Drive Type | Direct-Coupled Motor (no belt transmission) |
| Compliance | CE, ISO 8573-1 Class 1:2:1 (Air Purity Class), EN 60335-1, EN 61000-6-3 |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Compression Principle | Piston-Type |
| Flow Rate | 0–40 L/min |
| Maximum Pressure | 0–9.5 bar |
| Dew Point | ≤3 °C (standard operation), down to –15 °C with integrated dryer |
| Particle Filtration | ≤0.01 µm (0.01 micrometer) |
| Oil & Water Content | Oil-free, <0.1 ppm total hydrocarbons |
| Tank Material | Stainless Steel (AISI 304) |
| Noise Level | 63 dB(A) |
| Power | 600 W |
| Tank Volume | 40 L |
| Dimensions (L×W×H) | 640 × 470 × 720 mm |
| Weight | 72 kg |
| Safety Compliance | Spring-loaded pressure relief valve (activates at >10 bar), thermal cut-off switch, digital pressure controller with adjustable start/stop setpoints |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | GHS120L |
| Flow Rate | 120 L/min |
| Maximum Pressure | 10 bar (145 psi) |
| Motor Power | 1.5 kW |
| Noise Level | 53 dB(A) |
| Oil Content Class | ISO 8573-1 Class 0 (Certified Oil-Free) |
| Motor Efficiency Class | IE3 |
| Control Mode | Start/Stop |
| Weight | 120 kg |
| Dimensions (W×D×H) | 1025 × 690 × 840 mm |
| Inlet/Outlet Port | G1/2" F |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | GT1500 |
| Output Flow Rate | 1.5 L/min |
| Hydrocarbon (HC) & CO Content | < 0.05 ppm |
| CO₂ Content | < 1 ppm |
| NOₓ & SOₓ Content | < 0.1 ppm |
| Inlet Air Pressure Range | 4.5–10 bar |
| Power Supply | 110–120 V / 60 Hz or 220–240 V / 50 Hz |
| Power Consumption | 220 W |
| Dimensions (H×W×D) | 410 × 550 × 250 mm |
| Weight | 10 kg |
| Certifications | CE, CSA, FCC |
| Inlet/Outlet Fitting | 1/4" compression fitting (standard), optional 1/8" compression outlet |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | H-SAFE |
| Detection Range | 0–1000 ppm H₂ |
| Display Resolution | 1 ppm |
| Output Signals | 4–20 mA + RS485 + 2 Relay Outputs |
| Power Supply | 24 VDC |
| Enclosure Rating | IP66 |
| Explosion Protection | Ex d II CT6 |
| Operating Temperature | −30 °C to +55 °C |
| Humidity Range | 10–95% RH (non-condensing) |
| Integrated Temperature & Humidity Sensing | −40 °C to +80 °C / 0–100% RH |
| Data Logging | Operation Log, Alarm Log, Over-Temperature Event Log, Over-Range Event Log |
| Alert Functions | Sensor Fault, Output Failure, Over-Range Usage, Sensor Lifetime Warning, Calibration Due Reminder, Over-Temperature Warning |
| Brand | ChemTron |
|---|---|
| Origin | Switzerland |
| Model | HKH2-250 Plus |
| Hydrogen Generation Principle | Proton Exchange Membrane (PEM) Electrolysis of Deionized Water |
| Output Flow Rate | 250 mL/min |
| Output Pressure | 7 bar (105 psig) |
| Hydrogen Purity | 99.99996% |
| Power Consumption | 140 W |
| Water Reservoir Capacity | 2.5 L (2 L usable) |
| Internal Gas Volume | < 50 mL |
| Dimensions (W×D×H) | 230 × 370 × 507 mm |
| Weight | 13 kg |
| Noise Level | ≤ 46 dB(A) |
| Display | 128×64-pixel LCD with tactile buttons |
| Input Water Resistivity | ≥ 1 MΩ·cm (recommended ≥ 5 MΩ·cm) |
| Certifications | CE, CSA, FCC |
| Operating Environment | 15–40 °C, 0–80% RH (non-condensing) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | HP PLUS RACK |
| Nitrogen Generation Principle | CPSA (Compressed Pressure Swing Adsorption) |
| Output Flow Rate | 500 mL/min |
| Output Pressure | 5 bar (75 psig) ±0.05 bar |
| Nitrogen Purity | 99.999% |
| Dew Point | < −50 °C |
| Power Consumption | 270 W |
| Noise Level | 46 dB(A) |
| Dimensions | 19″ W × 3U H × 500 mm D |
| Input Air Requirements | 7–10 bar, oil-free and dry air per ISO 8573-1:2010 Class 1.2.1 |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | HV |
| Hydrogen Generation Principle | Proton Exchange Membrane (PEM) Electrolysis of Deionized Water |
| Output Pressure | 1.0–20 bar (15–290 psi) |
| Hydrogen Purity | 99.9999% (with PSA), 99.95% (without PSA) |
| Dew Point | −78°C (with PSA), −30°C (without PSA) |
| Feed Water Conductivity Requirement | <1 µS/cm (ASTM Type I), recommended <0.2 µS/cm (ASTM Type III) |
| Power Consumption | 1.7–6.4 kW |
| Dimensions (W×H×D) | 496×846×880 mm |
| Weight | 109–190 kg |
| Operating Temperature | 10–35°C |
| Noise Level | <72 dB(A) |
| Ingress Protection | IP20 |
| Communication Interface | RS-232 / Ethernet (optional) |