Life Science Instruments
Filter
Showing 2251–2280 of 2783 results
| Brand | Senbe |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | SEN580 |
| Pricing | Available Upon Request |
| Brand | Senbe |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SEN785 |
| Instrument Type | Stimulated Raman Scattering (SRS) Microscope |
| Excitation Wavelength | 785 nm |
| Spectral Range | 200–3000 cm⁻¹ |
| Spectral Resolution | ≤8 cm⁻¹ |
| Spectral Shift Accuracy | ≤1 cm⁻¹ |
| Spectral Shift Repeatability | ≤1 cm⁻¹ |
| Detection Limit | 0.1% ethanol in N₂ |
| Dynamic Range | ≥33,000:1 |
| Detector SNR | ≥1000:1 |
| Detector | TEC-cooled back-illuminated CCD array (1024 × 58 pixels) |
| Microscope | Upright infinity-corrected plan achromat objectives (10×, 20×, 50× |
| Objective Turret | ≥4-position manual turret |
| Camera | ≥9 MP monochrome CCD |
| Stage | Mechanical XY stage (175 × 145 mm, 76 × 42 mm travel) |
| Software | Integrated spectral acquisition, multivariate analysis (PCA, PLS, CNN), HQI matching, AirPLS baseline correction, S-G/Whittaker/EMD denoising, 2D spectral mapping, and user-defined microplastic spectral library management |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SI500 ICP-RIE Plasma Etching System |
| Price Range | USD 68,000 – 136,000 (FOB Hamburg) |
| Temperature Control Range | −120 °C to +150 °C |
| Plasma Source | Inductively Coupled Plasma (ICP) with Separate Bias RF (13.56 MHz) |
| Etch Chemistry Compatibility | Fluorine-based (SF₆, CF₄, CHF₃), Chlorine-based (Cl₂, BCl₃), Oxygen, Argon, and mixed gas chemistries |
| Chamber Material | Anodized aluminum with quartz or ceramic liner options |
| Maximum Wafer Size | 200 mm (8-inch) |
| Vacuum System | Turbo-molecular pump with backing pump (base pressure <5×10⁻⁷ mbar) |
| Process Control | Fully computerized via SENTECH EtchControl™ v4.x with recipe management, real-time parameter logging, and audit trail support |
| Brand | Sepure Instruments |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | OEM Manufacturer |
| Model | FCT2 |
| Price Range | USD 42,000 – 70,000 |
| Cooling Temperature Range | 5–15 °C |
| Ambient Operating Temperature | 15–35 °C |
| Max Flow Rate | 300 mL/min |
| Liquid-Wetted Materials | PEEK, FFKM, PP, PFA |
| Tube Rack Options | 11 mm, 13 mm, 16 mm, 30 mm ID |
| Collection Modes | Fixed Volume, Trigger-Based (TTL/Analog), Cyclic, Time-Programmed (Stepwise) |
| Power Input | 100–240 VAC, 50–60 Hz |
| Output | 24 VDC / 9.2 A |
| Dimensions (W×H×D) | 390 × 310 × 502 mm |
| Weight | 16 kg |
| RFID Integration | Yes |
| Sealed Dust-Resistant Enclosure | Yes |
| Independent Refrigeration & PID Temperature Control | Yes |
| Brand | Sepure Instruments |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | OEM Manufacturer |
| Model | STP 1000R |
| Purification Principle | Ion Exchange Chromatography (IEX) |
| Gradient Type | Linear Gradient |
| Detectors | UV-Vis (200–800 nm), Conductivity, pH |
| Flow Rate Range | 0.1–999.99 mL/min |
| Flow Rate Precision | RSD < 0.5% |
| UV Detection Range | 200–800 nm |
| Maximum System Pressure | 1.6 MPa |
| Conductivity Range | 0.001–999.99 mS/cm |
| Brand | Shanda |
|---|---|
| Model | SD-FS800Z |
| Measurement Principle | Closed-path infrared gas analysis (IRGA) with dual-wavelength CO₂ sensor |
| CO₂ Range | 0–2000 ppm |
| CO₂ Resolution | ≤0.1 ppm |
| CO₂ Accuracy | ±1.5% of reading (temperature-compensated) |
| Air Temperature Range | −20 °C to +60 °C |
| Relative Humidity Range | 0–85% RH (non-condensing) |
| Leaf Temperature Sensor | Thermistor, ±0.2 °C accuracy |
| PAR (Photosynthetically Active Radiation) Sensor | Silicon photodiode, 0–3000 µmol·m⁻²·s⁻¹, ±5% |
| Flow Rate Control | Adjustable 0–1.0 L·min⁻¹, stability ±1% FS |
| Power Supply | Rechargeable 8.4 V DC Li-ion battery, 15 h continuous operation (no external light source) |
| Display | 3.5″ TFT color LCD, 800×480 resolution |
| Data Storage | Internal 16 GB flash memory (expandable to 32 GB) |
| Interface | USB 2.0 for data export |
| Dimensions | 260 × 260 × 130 mm |
| Weight | 3.25 kg |
| Leaf Chamber Standard Size | 55 × 20 mm (customizable) |
| Operating Environment | −20 °C to +60 °C, 0–85% RH |
| Brand | Shanda |
|---|---|
| Model | SD-XB |
| Instrument Type | Multi-Function Microplate Washer |
| Wash Head Configuration | 8-channel or 12-channel dual-row removable wash head |
| Wash Fluid Channels | 1 standard (up to 4 optional) |
| Soaking Time Range | 0–24 h (hh:mm:ss adjustable) |
| Wash Cycles | 0–99 |
| Residual Volume per Well | ≤1 µL |
| Plate Compatibility | Standard 96-well flat-bottom, U-bottom, V-bottom, and C-bottom microplates |
| Wash Row Selection | 1–12 rows (including skip-row configuration) |
| Liquid Delivery Pressure | 5 adjustable levels |
| Aspiration/Dispense Time | 0–9 s (extendable) |
| Plate Shaking | 0–24 h (hh:mm:ss), 3 intensity levels |
| Cleaning Modes | Center wash, dual-point wash |
| Program Storage | 200 user-defined protocols + 20 pre-stored plate profiles |
| Liquid Level Monitoring | Waste bottle full-level alarm |
| Display & Interface | 5.6-inch color TFT touchscreen, 7×24 h continuous operation with auto power-saving mode |
| Power Input | AC 100–240 V, 50/60 Hz |
| Dimensions (L×W×H) | 380 × 330 × 222 mm |
| Net Weight | ~9 kg |
| Reagent Bottles | Three 2 L bottles included |
| Brand | Shanghai Optical |
|---|---|
| Origin | Shanghai, China |
| Model | XSP-6C |
| Microscope Type | Upright Biological Microscope |
| Eyepiece Configuration | Binocular |
| Objective Lenses | Four (4×, 10×, 40×, 100× oil) |
| Maximum Total Magnification | 1600× |
| Illumination | Built-in 6V/20W Halogen Lamp |
| Köhler Illumination System | Yes |
| Condenser | Adjustable Abbe Condenser with Iris Diaphragm |
| Nosepiece | Inclined Revolving Turret |
| Focusing Mechanism | Coaxial Coarse & Fine Focus (2 mm coarse travel, 0.002 mm fine increment) |
| Brand | Shanghai Shen |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Region | Domestic (China) |
| Model | FY50 |
| Pricing | Upon Request |
| Construction | Stainless Steel (AISI 304) |
| Power Supply | ~220 V / 50 Hz |
| Heating Power | 3.8 kW |
| Chamber Volume | 50 L |
| Minimum Water Supply Pressure | ≥0.20 MPa |
| Maximum Operating Pressure | ≤0.35 MPa |
| Temperature Range | Ambient +5 °C to 135 °C |
| Programmable Holding Time | 1–99 min or 1–99 h |
| Internal Temperature Uniformity | ±1.5 °C |
| Dimensions (W×D×H) | 155 × 66 × 100 cm |
| Packing Size (Wooden Crate) | 76 × 86 × 118 cm |
| Safety Features | Dual-limit thermal cutoff (±2 °C over setpoint), pressure relief valve (0.23 MPa), low-water auto-refill with audible/visual alarm, gravity-assisted steam exhaust, radial self-sealing silicone gasket, integrated cold-water spray cooling system (135 °C → ambient in 8–10 min), optional air counter-pressure module, drain valve for condensate removal, casters with brakes |
| Brand | Shanghai Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | DHP Series |
| Price | Upon Request |
| Temperature Control Range | RT+5°C to 65°C |
| Temperature Uniformity | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Brand | Shanghai Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | GHP Series |
| Quotation | Upon Request |
| Temperature Range (with Humidity) | RT+5°C to 65°C |
| Temperature Uniformity | ±0.5°C (measured at 37°C) |
| Brand | Shanghai Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | LRH Series |
| Temperature Range | L: −10 to 65°C |
| A | −20 to 65°C |
| B | −40 to 65°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity (Hot/Cold) | ±0.5°C / ±1.0°C |
| Power Supply | AC 220 V / 380 V, 50 Hz |
| Operating Ambient Temperature | +5 to 35°C |
| Input Power | 1100–7100 W (model-dependent) |
| Interior Dimensions (W×D×H, mm) | 400×300×420 to 800×700×900 |
| Exterior Dimensions (W×D×H, mm) | 660×720×930 to 1000×1210×1980 |
| Standard Shelves | 2–3 pcs |
| Timer Range | 0–9999 min |
| Refrigerant | R134a |
| Test Port | Ø25 mm (left side) |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Shanghai Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model Variants | LRH-70F / LRH-150F / LRH-250F / LRH-500F |
| Temperature Range | 0–60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±1.5 °C (at 25 °C, for models ≤250 L) / ±2.5 °C (at 25 °C, for LRH-500F) |
| Temperature Fluctuation | ±0.5 °C (high-temp setpoints) / ±1.0 °C (low-temp setpoints) |
| Refrigerant | R134a |
| Power Input | 450–2100 W |
| Internal Dimensions (W×D×H, mm) | 400×350×500 to 670×720×1020 |
| External Dimensions (W×D×H, mm) | 530×560×1080 to 850×1100×1930 |
| Standard Shelving | 2–3 adjustable stainless-steel shelves |
| Timer Range | 0–9999 min |
| Display | LCD (F-series) or LED digital (non-F) |
| Optional | RS485 interface, thermal printer output, independent over-temperature alarm |
| Brand | Shanghai Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MJ Series |
| Price | Upon Request |
| Temperature Range | 0–60 °C |
| Temperature Uniformity | ±1.5 °C (at 25 °C) |
| Humidity Range | 60–85 %RH |
| Capacity | 70–500 L |
| Brand | Shelco |
|---|---|
| Origin | USA |
| Model | FAS & FAC Series |
| Construction Material | 304L/316L Stainless Steel, Nickel-Plated Brass, Cast Iron, FDA-Compliant Polymers |
| Max Operating Pressure | 250 PSI (17 bar) @ 275°F (135°C) |
| Connection Sizes | 1/4", 3/8", 1/2", 3/4", 1" |
| End Connections | FNPT, Flanged, Sanitary (Tri-Clamp), BSP |
| Sealing Type | Knife-Edge Seal for Dual-Open Cartridges |
| Closure | Bolt-and-Nut with Optional T-Handle |
| Compliance | FDA 21 CFR Part 177 for Polymer Components, ASME B31.3 Process Piping Design Basis |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported Instrument |
| Model | AXIMA Performance |
| Pricing | Available Upon Request |
| Brand | Shinwa |
|---|---|
| Origin | Japan |
| Model | SDM-72 |
| Measurement Principle | Magnetic Balance Electromagnetic Induction |
| Measurand | Ferrous Particle Concentration in Lubricants |
| Range | 0–5.00 % (w/w) |
| Resolution | 0.001 % (w/w) |
| Sample Volume | ~0.8 mL |
| Zero Adjustment | Automatic |
| Power Supply | 4 × AA Alkaline Batteries or Optional AC Adapter |
| Battery Life | Approx. 30 h (alkaline) |
| Operating Temperature | 0–40 °C |
| Dimensions | 84 × 190 × 40 mm (W × H × D) |
| Weight | ~500 g (including batteries) |
| Standard Accessories | Carrying Case, Sampling Scoop, 10 × Lubricant Sampling Sleeves, 4 × AA Alkaline Batteries |
| Optional Accessory | AC Charging Adapter |
| Brand | Shinwa |
|---|---|
| Origin | Japan |
| Model | SDM-73 |
| Measurement Principle | Magnetic Balance Electromagnetic Induction |
| Measuring Range | 0–19,999 ppm (wt) |
| Minimum Resolution | 1 ppm (wt) |
| Sample Volume | ~1.5 mL |
| Power Supply | 4 × AA Alkaline Batteries or Optional AC Adapter |
| Battery Life | ~30 hours (alkaline) |
| Operating Temperature | 0–40 °C |
| Dimensions | 84 × 190 × 40 mm (W × H × D) |
| Weight | ~500 g (including batteries) |
| Accessories | Carrying Case, Five 2-mL Syringes, Two Sampling Nozzles, Syringe Holder |
| Brand | Shinwa |
|---|---|
| Origin | Japan |
| Model | XP-329IIIR |
| Detection Principle | High-sensitivity tin-dioxide-based metal oxide semiconductor (MOS) sensor with heated filament |
| Display | 64×128 dot-matrix LCD |
| Measurement Range (Odor Intensity Scale) | 0–40 (equivalent to 0–2000 odor unit scale) |
| Repeatability | ±5% ±1 digit (under identical conditions) |
| Sampling Method | Micro air pump aspiration (400 ± 150 mL/min) |
| Response Time | ≤20 s (to 90% of final reading under calibrated odor gas) |
| Operating Temperature | 0–40 °C |
| Operating Humidity | 10–80% RH (non-condensing) |
| Dimensions | 84 × 275 × 40 mm (W×H×D, excluding protrusions) |
| Weight | ~640 g (including batteries) |
| Power Supply | 4 × AA alkaline batteries or AC adapter (100–240 V AC) |
| Battery Life | >8 h continuous operation (ambient conditions, aspiration active) |
| Data Storage | 8,188 entries (monitoring mode) / 4,095 entries (batch mode) |
| Output Interfaces | Analog (0–200 mV), RS-232C (ASCII) |
| Compliance | Designed for field-deployable environmental and industrial odor assessment per Japanese JIS Z 8401 and ISO 16000-29 principles |
| Brand | Single-cell |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | DCP A100 |
| Pricing | Upon Request |
| Instrument Category | Microdroplet-based Screening |
| Throughput | 1,000 single-colony picks per hour |
| Detection Method | AI-assisted brightfield and fluorescence imaging |
| Output Format | 96-well plate format |
| Compliance | Designed for GLP-compliant microbial screening workflows |
| Brand | SLEE |
|---|---|
| Origin | Germany |
| Model | CUT 6062 |
| Instrument Type | Paraffin Microtome |
| Automation Level | Fully Automatic Cryo-Paraffin Microtome |
| Section Thickness Range | 0.5–100 µm (adjustable in 0.5 µm increments) |
| Cutting Speed | User-Configurable |
| Maximum Specimen Size | 50 × 50 mm |
| Dimensions (W × D × H) | 480 × 610 × 350 mm |
| Weight | 34 kg |
| Compliance | CE, ISO 13485 (Medical Device Quality Management), IEC 61010-1 (Laboratory Equipment Safety) |
| Brand | X-Imaging |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM/ODM) |
| Product Category | Domestic |
| Model | Smart Agar Medium Dispensing System |
| Pricing | Available Upon Request |
| Throughput | 300 Petri Dishes/h |
| Compatible Dish Diameter | 90 mm (customizable) |
| Temperature Control Range | 40–60 °C (adjustable, stability ±1 °C) |
| Sterilization | Integrated UV-C lamp (254 nm) in isolated dispensing chamber |
| Traceability | On-device thermal inkjet label printer for real-time medium batch coding and process logging |
| Brand | X-Imaging |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | X-Plater Pro |
| Pricing | Available Upon Request |
| Brand | Smavew |
|---|---|
| Model | MacroView |
| Origin | Hubei, China |
| Light Sheet Technology | Dr-SPIM (Diffractive-Robust Static Planar Illumination Microscopy) |
| Lateral Resolution | ≤300 nm |
| Axial Resolution | ≤1.5 µm |
| Sample Chamber Configurations | 5 independent chambers — two at 91 mm × 30 mm × 30 mm (organoids/tissues), two at 110 mm × 45 mm × 50 mm (whole organs, e.g., rat brain), one at 245 mm × 79 mm × 70 mm (whole mouse) |
| Stage Travel Range | ≥25 mm |
| Positioning Repeatability | ±≤1 µm |
| Laser Lines | 405 nm (violet diode), 488 nm (blue diode), 561 nm (green solid-state), 638 nm (red diode) |
| Objectives | Olympus 10×/0.6 (WD = 8 mm, RI = 1.33–1.52) |
| Camera | 2048 × 2048 pixels |
| Illumination | Dual-sided ultra-thin light sheet |
| Imaging Depth | Centimeter-scale |
| Data Acquisition Workstation | Intel Core i7-14700K or higher, ≥128 GB RAM, ≥1 TB OS SSD, dual 4 TB high-speed SSDs, 4 TB HDD, Windows 10 Pro 64-bit |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | SPF601 |
| Spectral Range | 290–400 nm (UVA + UVB) |
| Output Configuration | Six independent 8-mm square irradiation ports |
| Irradiance Control | Individual manual knob per port + optional XPS-300 programmable power supply |
| Maximum Irradiance | Up to 4 MED/min per port |
| Solar Simulation Fidelity | >90% spectral match to CIE Reference Solar Spectrum (ISO 17166:2019/Erythema Action Spectrum) |
| Mechanical Positioning | Integrated precision locking gooseneck arm with UV-stable optical coupling |
| Brand | Solentim |
|---|---|
| Origin | United Kingdom |
| Manufacturer | Solentim Ltd. |
| Model | Cell Metric® X |
| Type | Automated High-Content Clonal Imaging and Verification System |
| Compliance | Designed for GLP/GMP-aligned workflows, supports 21 CFR Part 11–compliant audit trails via STUDIUS platform |
| Automation Interface | Compatible with third-party robotic arms (e.g., Hamilton, Tecan) via standard API and physical stacker interface (10-plate capacity) |
| Brand | Solentim |
|---|---|
| Origin | United Kingdom |
| Manufacturer | Solentim Ltd. |
| Type | Integrated Bioprocess Analyser |
| Model | ICON |
| Software Platform | STUDIUS v4.x |
| Sample Throughput | Up to 96 samples per run |
| Minimum Sample Volume | 10 µL |
| Measurement Modes | IgG ELISA-based titer, automated brightfield/image-based cell counting (VCD), integrated yield calculation |
| Data Integration | Native support for Cell Metric® and VIPS™ clone imaging metadata |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | Sonics |
|---|---|
| Origin | USA |
| Model | VCX130PB (Hand-Triggered Pulse) & VCX130FSJ (Foot-Switch Pulse) |
| Output Power | 130 W |
| Frequency | 20 kHz |
| Dimensions (H×W×D) | 115 × 250 × 320 mm |
| Weight | 3.0 kg (VCX130PB), 3.2 kg (VCX130FSJ) |
| Transducer Models | CV188 (VCX130PB), CV18 (VCX130FSJ) |
| Transducer Specs | Ø32 mm × 146 mm, 340 g, cable length 1.5 m (VCX130PB), 1.8 m (VCX130FSJ) |
| Standard Probe | Ø3 mm titanium alloy (Ti-6Al-4V), 138 mm length, volume range 250 µL–10 mL, part #630-0422 |
| Input Power | 220 V, 50/60 Hz |
| Brand | Sony |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Sony CGX10 |
| Pricing | Upon Request |
| Technology Pathway | High-Throughput Sorting Flow Cytometer |
| Product Type | Flow Cytometric Cell Sorter |
| Intended Use | Clinical & GMP-Compliant Cell Therapy Manufacturing |
| Lasers | 4 lasers (405 nm, 488 nm, 561 nm, 638 nm) |
| Detection Channels | 8-color fluorescence + FSC/SSC |
| Coefficient of Variation (CV) | ≤ 3% |
| Cell Analysis Rate | ≥ 100,000 cells/s |
| Sample Flow Rate | 20–60 µL/min |
| Compensation Modes | Automated, Manual, or Offline Compensation |
| Sorting Configuration | Fully enclosed bag-based collection system |
| Cell Sorting Rate | ≥ 33,000 cells/s |
| Brand | Sony |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CGX10 |
| Pricing | Upon Request |
| Type | Temperature-Controlled (Low-Temperature Capable) |