Muffle Furnace
Filter
Showing 691–720 of 923 results
| Brand | Thermal Technology |
|---|---|
| Origin | USA |
| Type | Horizontal/Vertical Tube Furnace |
| Max Temperature | 2500°C |
| Temperature Uniformity | ±1°C (at 2500°C, full hot zone) |
| Control Accuracy | ±0.1°C |
| Ramp Rate (to max temp) | >100°C/min |
| Cool-down Rate | up to 300°C/min |
| Heating Element | Tungsten Rods |
| Power Rating | 3000 W |
| Atmosphere Options | Vacuum (≤10⁻⁶ Torr), H₂ (wet/dry), NH₃ (dissociated), N₂, Ar, forming gas |
| Chamber Design | Cold-wall, double-jacketed stainless steel |
| Heating Zone Configuration | Multi-layer radiation shields with Mo/W reflective shielding |
| Programmable Controller | Microprocessor-based, 50+ stored recipes, real-time edit capability, alarm logging, RS-485/Ethernet interface |
| Compliance | Designed for GLP/GMP environments |
| Brand | Thermal Technology |
|---|---|
| Origin | USA |
| Model | HP200 |
| Type | Graphite/W-Mo Heating Crucible-Type Hot Press Furnace |
| Max Temperature | 2500 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Max Power | 3000 W |
| Ramp Time to Max Temp | 30 min |
| Heating Elements | Graphite, Tungsten, Molybdenum |
| Internal Chamber Dimensions | 30 cm × 20 cm × 20 cm |
| Maximum Applied Pressure | 100 tons |
| Effective Hot Zone | 24″ × 24″ × 30″ (610 mm × 610 mm × 762 mm) |
| Key | Brand: Thermal Technology |
|---|---|
| Origin | USA |
| Model | Model 1000 |
| Type | Tube Furnace |
| Max Temperature | 3000 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Max Power | 3000 W |
| Heating Rate to Max Temp | 100 °C/min |
| Heating Zone Material | Graphite or Molybdenum |
| Internal Chamber Dimensions | 30 × 20 × 20 cm |
| Atmosphere Options | Vacuum (mechanical pump standard, high-vacuum optional), Ar, N₂, O₂, H₂ |
| Compliance | ASTM E2550, ISO 8573-1 (for gas purity control), GLP-compliant operation architecture |
| Brand | Thermal Technology |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BJ5 |
| Instrument Type | Crucible-Type Arc Melting Furnace |
| Maximum Temperature | >3000 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Maximum Power Supply Requirement | 1000 A DC |
| Heating Rate to Max Temperature | ≤20 min |
| Heating Method | Thoriated Tungsten Electrode Arc Discharge |
| Internal Chamber Dimensions | 23 cm (W) × 24 cm (D) × 29 cm (H) |
| Electrode Diameter | 6.4 mm |
| Water-Cooled Stainless Steel Bell Jar Diameter | 24.4 cm, Height: 29.2 cm |
| Copper Hearth Diameter | 22.9 cm |
| Vacuum Range | 10⁻⁶ Torr (with optional turbomolecular pump) |
| Operating Pressure Range | High vacuum to slight positive pressure (≤1.5 bar gauge) |
| Viewing Port | Quartz window integrated in bell jar top |
| Sample Diameter Range | 13–76 mm |
| System Weight (main unit only) | 20.4 kg |
| Required Cooling Water | 30.4 L/min @ 3.5 bar, 21 °C |
| Vacuum Pump Requirement | ≥56.6 L/min (2 CFM) |
| Inert Gas Flow Range | 56.6–283.2 L/min (2–10 CFM) |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Compact Muffle Furnace |
| Max Operating Temperature | 1000 °C |
| Chamber Lining | Ceramic Fiber Insulation |
| Heating Configuration | Quadrilateral (4-Side) Heating Elements |
| Control System | Silent Solid-State Relay |
| Door Orientation | Side-Opening |
| Exhaust Port | Rear Wall Mounted |
| Safety | EN 60519-2 Compliant Over-Temperature Cut-Off Limiter |
| Accessories Included | Exhaust Chimney, Thermal Safety Limiter |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Compact Tube Furnace |
| Max Operating Temperature | 1100 °C (single-zone) / 1300 °C (triple-zone) |
| Tube Diameter | 200 mm |
| Heating Zone Length | 500 mm (extendable) |
| Heating Element Control | Solid-state relays (1100 °C) or semiconductor controllers (1300 °C) |
| Temperature Uniformity | Optimized via vacuum-formed ceramic fiber insulation |
| Safety Compliance | Overtemperature protection per EN 60519-2 |
| Controller Location | Bottom-mounted for ergonomic access |
| Optional Configurations | Vertical orientation, custom tube materials (quartz, alumina, stainless steel), extended heating zones |
| Brand | ThermConcept |
|---|---|
| Origin | Germany |
| Model | Flip-Open Tube Furnace |
| Max Operating Temperature | 1100 °C |
| Tube Diameter | Ø300 mm |
| Heating Zone Length | Up to 500 mm (extendable) |
| Control Architecture | Single-Zone or Triple-Zone PID |
| Cooling Method | Rapid air-cooling via hinged outer casing |
| Safety Compliance | EN 60519-2 overtemperature protection limiter |
| Mounting | Base-mounted vertical operation |
| Controller Location | Bottom-mounted for ergonomic access |
| Heating Element Control | Solid-state relay-driven |
| Temperature Uniformity | Optimized via axial zoning (triple-zone model) |
| Enclosure Design | Hinged front-opening shell for法兰 and tube insertion |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Forced-Air Drying Oven |
| Temperature Range | +10 °C above ambient to 250 °C (optional up to 300 °C) |
| Chamber Volume | 23–715 L |
| Air Circulation | Motor-driven forced convection with adjustable fan speed |
| Control System | Microprocessor-based controller with LCD display |
| Compliance | IQ/OQ documentation available |
| Optional Accessories | PT100 temperature probe, HEPA inlet filter, observation window with LED lighting (models ≥60 L), door lock (models ≥60 L), left-hinged door (except model 700), stainless steel exterior |
| Construction | Stainless steel chamber and housing |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Vertical-Lift Muffle Furnace |
| Max Operating Temperature | 1600 °C / 1750 °C / 1800 °C |
| Chamber Volume | 2 L (benchtop), 4 L (benchtop), up to 2000 L (industrial vertical) |
| Heating Element | MoSi₂ |
| Insulation | High-purity alumina fiber |
| Construction | Dual-wall stainless steel housing with rear ventilation |
| Lift Mechanism | Motorized base-lift or furnace-bottom lift configuration |
| Optional Features | Inert gas inlet, automatic exhaust flap, protective atmosphere port, reinforced load-bearing base |
| Compliance | Designed per IEC 61000-6-3, EN 60519-1, and applicable parts of ISO/IEC 17025 for laboratory thermal equipment |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | High-Temperature Muffle Furnace |
| Max Operating Temperature | 1500 °C, 1600 °C, 1750 °C, or 1800 °C |
| Chamber Uniformity | ±3 °C (at setpoint) |
| Construction | Dual-wall insulated cabinet with rear ventilation |
| Insulation | High-purity alumina fiber (low thermal conductivity, <0.12 W/m·K at 1000 °C) |
| Heating Elements | Dual-side mounted molybdenum disilicide (MoSi₂) rods |
| Control System | Solid-state relay (SSR) with PID algorithm |
| Temperature Accuracy | ±1 °C (typical, within operating range) |
| Safety Compliance | EN 60519-2 certified overtemperature protection |
| Optional Features | Motorized bottom door, inert gas inlet port, active cooling module, programmable exhaust damper |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | High-Temperature Muffle Furnace |
| Max Operating Temperature | 1400 °C / 1500 °C / 1600 °C |
| Heating Element | Silicon Carbide (SiC) rods, laterally mounted |
| Chamber Lining | Ceramic fiber insulation |
| Enclosure | Dual-wall construction with rear ventilation |
| Door Type | Top-hinged lift door with reinforced fiber seal |
| Base Lining | High-temperature ceramic fiber board |
| Standard Accessories | Ceramic hearth plate |
| Temperature Control | Solid-state relay with PID algorithm |
| Exhaust Port | Integrated vent opening on top |
| Surface Temperature | <60 °C at ambient conditions |
| Compliance | Designed to meet EN 61000-6-3 (EMC), EN 61000-6-2, and general lab safety requirements per DIN VDE 0701-1 |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | KLS 07/11/M (1150 °C) / KLS 05/13/M (1300 °C) |
| Max Operating Temperature | 1150 °C or 1300 °C |
| Chamber Construction | High-purity ceramic muffle liner |
| Heating Configuration | Four-sided embedded heating elements |
| Insulation | Dual-wall steel housing with rear ventilation and low-surface-temperature design |
| Door Type | Top-lifting (KLS 07/11/M) or side-hinged (KLS 05/13/M) with ceramic fiber insulation |
| Control System | Silent solid-state relay temperature controller |
| Safety | EN 60519-2 compliant overtemperature limiter |
| Accessories | Stackable crucibles, ceramic/stainless steel collection trays (1300 °C / 1100 °C max), heat-resistant tongs (300 mm / 500 mm), gloves (600 °C / 900 °C) |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | High-Temperature Muffle Furnace |
| Max Operating Temperature | 1600 °C / 1750 °C / 1800 °C (configurable) |
| Chamber Volume | 16 L – 70 L |
| Heating Element | Dual-side MoSi₂ (optional rear-wall configuration) |
| Chamber Lining | High-purity alumina fiber insulation |
| External Casing | Polished stainless steel (AISI 304) |
| Door Mechanism | Parallel-guided safety door |
| Cooling | Optional forced-air cooling system |
| Exhaust | Top-mounted vent port with optional automatic exhaust lid |
| Atmosphere Options | Inert gas inlet (N₂, Ar), manual or programmable gas mixing module |
| Control System | Silent solid-state relay regulation with ±1 °C temperature stability (at setpoint) |
| Compliance | Designed per EN 61000-6-3 (EMC), EN 61000-6-2, and IEC 61010-1 for laboratory equipment safety |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | MoSi2 |
| Max Operating Temperature | 1700 °C / 1800 °C (short-term) |
| Tube Diameter Range | 38–75 mm |
| Heating Zone Length | 200–400 mm |
| Standard Tube Material | C799 ceramic |
| Insulation | Vacuum-formed high-purity alumina-silica fiber |
| Heating Element | Parallel-mounted MoSi₂ rods |
| Control | Solid-state semiconductor controller |
| Enclosure | Dual-wall housing with rear ventilation |
| Safety | EN 60519-2 compliant overtemperature limiter |
| Optional Configurations | Three-zone temperature control, vertical orientation with base stand, water-cooled flanges, gas-tight stainless steel flanges, manual/automated gas supply systems, internal water-cooling for rapid cooldown |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Natural Convection Drying Oven |
| Temperature Range | +5 °C above ambient to 250 °C |
| Max Operating Temperature | 250 °C |
| Chamber Volume | 55–715 L |
| Control System | Microprocessor-based controller with LCD display |
| Compliance | IQ/OQ documentation available |
| Safety Features | Overtemperature protection, insulated double-wall construction, door lock mechanism |
| Optional Accessories | Observation window with LED lighting, PT100 temperature probe, software interface, ducting ports (Ø25/50/100 mm), left-hinged door (except model 700) |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | T-Series |
| Max Operating Temperature | 1100 °C / 1200 °C / 1300 °C |
| Chamber Lining | Ceramic Fiber Insulation |
| Heating Configuration | Dual-Side & Top Radiant Heating (Ceramic Tube-Mounted Elements) |
| Control System | Silent Solid-State Relay with PID Regulation |
| Safety Compliance | EN 60519-2 Overtemperature Protection |
| Optional Features | Exhaust Chimney (with/without Fan & Catalyst), Inert Gas Inlet, Mobile Floor Stand, Forced-Air Circulation Kit |
| Chamber Uniformity | ±3 °C at Setpoint (typical, per ISO 8573-1 reference methodology) |
| External Surface Temperature | <55 °C at max operating temperature |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | TC-UF Series (1100 °C / 1200 °C variants) |
| Temperature Range | Up to 1100 °C or 1200 °C |
| Construction | Stainless steel exterior, high-purity ceramic fiber insulation |
| Heating Element | Embedded resistance wire in ceramic heating plates |
| Control System | Silent solid-state relay with PID temperature regulation |
| Safety | Dual-stage overtemperature protection per EN 60519-2 |
| Exhaust Options | Optional exhaust chimney with fan and catalytic converter |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | TCC-Series |
| Control Architecture | Microprocessor-Based PID with Optional Siemens S7 PLC Integration |
| Display | Graphical LCD Interface |
| Expandability | Modular I/O, Software Integration (TCC-View), Remote Monitoring Capability |
| Compliance | DIN ISO 9001 Process Control Requirements, Supports GLP/GMP Data Integrity Protocols (with Audit Trail Enabled Software Option) |
| Power Control | Solid-State Relays / SCR Phase-Angle Control / Multi-Zone DC-Driven Heating Management |
| Connectivity | RS485/Modbus RTU, Ethernet (Optional), USB Data Export |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Model | F6000-60 / F30400-60 |
| Temperature Range | 100–975 °C |
| Chamber Volume | 15 L or 45 L |
| Air Flow Control | 0–80 L/min (adjustable via front-mounted flowmeter) |
| Temperature Stability at 750 °C | ±3 °C |
| Heating Rate | 8 °C/min (≤500 °C), 6 °C/min (500–750 °C) |
| Compliance | ASTM D3174 |
| Gas Inlet Ports | 1 × 0.95 cm thermocouple port, 1 × 0.635 cm or 0.876 cm soft-hose barb for inert gas supply |
| Control Options | B1 (single-setpoint), C1 (8-segment single program), D1 (16-segment × 4 programs, RS232 interface) |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Benchtop Box-Type Muffle Furnace |
| Models | FB 1300 / FB 1400 |
| Max Temperature | 1100°C |
| Temperature Uniformity (at 1000°C) | ±7.8°C (FB 1300) / ±5.0°C (FB 1400) |
| Temperature Stability (at 1000°C) | ±0.3°C (FB 1300) / ±0.5°C (FB 1400) |
| Control System | Digital Single-Setpoint (Class A1) |
| Heating Method | Resistive Wire (Ni-Cr Alloy) |
| Chamber Dimensions (W×H×D, mm) | 103×98×130 (FB 1300) / 127×108×152 (FB 1400) |
| External Dimensions (W×H×D, mm) | 230×360×216 / 330* (FB 1300, door open) / 250×370×282 / 400* (FB 1400, door open) |
| Chamber Volume | 1.3 L (FB 1300) / 2.1 L (FB 1400) |
| Power Rating | 1060 W |
| Input Voltage/Frequency | 240 V, 50/60 Hz |
| Current Draw | 4.4 A (FB 1300) / 6.3 A (FB 1400) |
| Ramp Rate to Max Temp | 6–12°C/min |
| Thermal Insulation | High-Density Ceramic Fiber |
| Safety Features | Door-Interlocked Power Cut-off, Thermocouple Fault Protection, Rear 9.5-mm Process Port |
| Net Weight | 9 kg (FB 1300) / 12.7 kg (FB 1400) |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Model | FB1300 / FB1400 |
| Temperature Range | 100–1100 °C |
| Chamber Volume | 1.3 L / 2.1 L |
| Insulation | Ceramic Fiber |
| Heating Element Layout | Top + Dual Side Mounting |
| Door Operation | Downward-Opening Hinged Door |
| Safety Interlock | Integrated Door-Activated Power Cut-off |
| Thermocouple Fault Protection | Automatic Heater Disengagement |
| Rear Port | 0.95 cm Diameter for External Sensor Integration |
| Control System | Digital Single-Setpoint Controller with Dual-Mode Display (Actual/Setpoint Temperature) |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Type | Box-Type Muffle Furnace |
| Model | K114 |
| Maximum Temperature | 1100 °C |
| Temperature Uniformity | ±6 °C |
| Control Accuracy | ±2–4 °C |
| Heating Method | Resistance Wire Heating |
| Internal Dimensions | 170 × 130 × 160 mm |
| Chamber Volume | 3.5 L |
| Max Power | 690 W |
| Ramp Rate to Max Temp | 6–12 °C/min |
| External Dimensions | 456 × 646 × 570 mm |
| Net Weight | 36 kg |
| Power Supply | 230 V, 50/60 Hz |
| Insulation | Asbestos-Free Refractory Material |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Box Furnace |
| Maximum Temperature | 1500°C |
| Temperature Uniformity | ±2–4°C |
| Rated Power | 6400 W |
| Heating Rate (to 1500°C) | 6–12°C/min |
| Heating Element | Silicon Carbide (SiC) Rods |
| Internal Chamber Dimensions | 127 × 304.8 × 152.4 mm (H × D × W) |
| External Dimensions | 660.4 × 736.6 × 635 mm (H × D × W) |
| Voltage/Frequency | 208–240 V, 50/60 Hz |
| Net Weight | 91 kg |
| Controller | Multi-segment Single-Program Digital Controller |
| Thermocouple Type | Type R (Platinum/Rhodium), Rear-Mounted |
| Door Configuration | Vertical Lift |
| Insulation | Moldatherm® High-Density Ceramic Fiber |
| Safety Features | Interlocked Door Switch, Over-Temperature Protection (optional models) |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Box Furnace |
| Max Temperature | 1200°C |
| Temperature Uniformity | ±5°C at 1200°C |
| Control Accuracy | ±2–4°C |
| Max Power | 4600 W |
| Ramp Rate to Max Temp | 6–12°C/min |
| Heating Method | Resistance Wire (NiCr or Inconel) |
| Internal Dimensions (H×D×W) | 133.4×355.6×190.5 mm |
| Chamber Volume | 9 L |
| External Dimensions (H×D×W) | 622.3×508×508 mm |
| Net Weight | 66 kg |
| Thermocouple Type | Platinel II (10 ft lead with plug) |
| Insulation | Moldatherm® ceramic fiber |
| Door Design | Bottom-hinged, spring-assisted, floating-pin seal with high-temp insulation and viewing window |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Box Furnace |
| Maximum Temperature | 1700°C |
| Temperature Uniformity | ±2–4°C |
| Rated Power | 5900 W |
| Heating Rate (to 1700°C) | 6–12°C/min |
| Heating Element | Molybdenum Disilicide (MoSi₂) Rods |
| Internal Chamber Dimensions | 228.6 × 266.7 × 279.4 mm (H × D × W) |
| Chamber Volume | 17 L |
| Controller Type | Digital Single-Point |
| Voltage/Frequency | 208–240 V, 50/60 Hz |
| Net Weight | 159 kg |
| Safety Features | Interlocked Door Switch, Rear Gas Inlet (Ø9.5 mm), Moldatherm Insulation, Dual-Wall Construction |
| Cooling | Integrated High-Speed Circulation Fan |
| Thermocouple | Type B (with 3 m cable and standardized connector) |
| Compliance | Designed for GLP-compliant thermal processing environments |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Box Furnace |
| Maximum Temperature | 1200°C |
| Temperature Control Accuracy | ±2–4°C |
| Rated Power | 5800 W |
| Heating Rate (to Max Temp) | 6–12°C/min |
| Heating Method | Resistance Wire |
| Internal Dimensions | 177.8 × 279.4 × 330.2 mm |
| Door Configuration | Vertically Lifting |
| Gas Inlet/Outlet | Rear 0.375″ inlet, Top 1″ exhaust port |
| Thermal Insulation | Moldatherm™ ceramic fiber insulation |
| Heating Element | Patented LGO™ (Low-Glow Oxide) wire |
| Thermocouple Type | Platinel II |
| Safety Features | Automatic power cutoff upon door opening, adjustable overtemperature protection |
| Control System | Integrated digital controller with dual LED display (setpoint & actual temperature), selectable °C/°F units |
| Standard Accessories | One removable combination shelf, Moldatherm™ furnace floor plate |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Type | Tube Furnace |
| Temperature Range | 1100°C to 1700°C |
| Heating Zone Lengths | 304.8 mm, 609.6 mm, or 914.4 mm |
| Configuration | Single-Zone or Triple-Zone |
| Controller | Integrated or External Microprocessor-Based Programmable Controller |
| Orientation | Horizontal or Vertical |
| Compliance | Designed for ASTM E1142, ISO/IEC 17025-compliant laboratory environments |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Split-Tube Furnace |
| Max Temperature | 1200°C |
| Temperature Control Accuracy | ±2–4°C |
| Max Power | 2675 W |
| Ramp Rate (to Max Temp) | 6–12°C/min |
| Heating Method | Resistive Wire Heating |
| Internal Chamber Dimensions | 406.4 × 431.8 × 584.2 mm |
| Voltage/Frequency | 208/240 V, 50/60 Hz |
| Controller Model | CC58114C-1 |
| Tube Diameter Range | 25.4–76.2 mm |
| Heated Zone Length | 304.8 mm |
| External Dimensions (H×D×W) | 406.4 × 431.8 × 584.2 mm |
| Net Weight | 55 kg |
| Compliance | CE, UL Listed (per ANSI/UL 61010-1), RoHS Compliant |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Lindberg/Blue M (Thermo Fisher Scientific) |
| Model | BF51748C-1 |
| Instrument Type | Box-Type Muffle Furnace |
| Max Temperature | 1100°C |
| Temperature Uniformity | ±2–4°C (at setpoint) |
| Max Power | 5600 W |
| Heating Rate (to 1100°C) | 6–12°C/min |
| Heating Method | Resistance Wire (Kanthal A1 alloy) |
| Internal Chamber Dimensions | 101.6 × 203.2 × 101.6 mm (H × D × W) |
| Chamber Volume | 1.99 L |
| Controller Type | Single-Setpoint Digital Controller |
| External Dimensions | 444.5 × 508 × 381 mm (H × D × W) |
| Net Weight | 25 kg |
| Safety Features | Automatic power cutoff upon door opening, adjustable overtemperature protection, K-type thermocouple (IEC 60584 compliant), dual-wall insulated housing |
| Gas Purge Ports | 25.4 mm (1") top exhaust port + 9.5 mm (0.375") rear inlet port |
| Standard Accessories | Moldatherm furnace tray, front-panel mounted power switch |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Lindberg/Blue M |
| Model | BF517xxC / BF518xxC Series |
| Chamber Volume | 1.99 L, 5.3 L, 18.4 L, or 42.5 L |
| Max Operating Temperature | 1100°C |
| Control Options | Digital Single-Setpoint or Multi-Step Programmable Controller |
| Power Supply | 208–240 V, 50/60 Hz |
| Heating Power | 1.8 kW (1.99–5.3 L), 3.5 kW (18.4 L), or 5.6 kW (42.5 L) |
| External Cooling Surface Temp | <60°C at 1100°C operation |
| Safety Features | Door-Interlocked Power Cut-off, Adjustable Over-Temperature Protection, K-Type Thermocouple |
| Gas Ports | 1" Top Exhaust + 3/8" Rear Inlet |
| Construction | Dual-Wall Insulated Steel Housing with Embedded Heating Elements |
| Compliance | Designed for GLP/GMP environments |