Muffle Furnace
Filter
Showing 721–750 of 923 results
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Horizontal Tube Furnace |
| Max Temperature | 1700°C |
| Temperature Uniformity | ±2–4°C |
| Max Power | 5000W (STF54434C) / 10000W (STF54454C) |
| Ramp Rate to Max Temp | 6–12°C/min |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Chamber Internal Dimensions | 482.6 × 406.4 × 558.8 mm |
| Work Tube OD | 76.2 mm (3 in.) |
| Heating Zone Length | 304.8 mm (STF54434C) / 609.6 mm (STF54454C) |
| Controller | CC59256PCOM / CC59256PCOM2CKT |
| Thermocouple | Type B (Pt/Rh), 3 m (10 ft) lead with molded plug |
| External Dimensions (H×D×W) | 462.6×406.4×556.8 mm / 482.6×406.4×863.6 mm |
| Shipping Weight | 43 kg / 75 kg |
| Insulation | Dual-shell construction with convective air gap and high-purity alumina fiber insulation |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Tube Furnace |
| Max Temperature | 1100°C |
| Temperature Control Accuracy | ±2–4°C |
| Max Power | 3300 W |
| Ramp Rate (to Max Temp) | 6–12°C/min |
| Heating Method | Resistive Wire Heating |
| Internal Chamber Dimensions | 152.4 × 304.8 × 152.4 mm |
| Controller | Microprocessor-Based PID with Multi-Stage Ramp/Soak Programming |
| Thermocouple Type | K-Type |
| Optional Interface | RS485 Digital Communication Port |
| Insulation | Moldatherm™ High-Efficiency Ceramic Fiber with Hollow-Core Air Gap Design |
| Zone Configuration | Independent Three-Zone Heating & Control |
| Safety Features | Adjustable Over-Temperature Cut-Off, Dual-Redundant Thermal Protection |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Horizontal Tube Furnace |
| Model | STF55433C-1 |
| Max Temperature | 1500°C |
| Temperature Uniformity | ±2–4°C |
| Max Power | 6000 W |
| Ramp Rate (to Max Temp) | 6–12°C/min |
| Heating Element | Silicon Carbide (SiC) Rods |
| Internal Chamber Dimensions | 482.6 × 406.4 × 863.6 mm (W × H × L) |
| External Dimensions | 481.8 × 482.6 × 584.2 mm (H × D × W) |
| Voltage/Frequency | 208/240 V, 50/60 Hz |
| Net Weight | 123 kg |
| Controller | Single-Point Multi-Step PID Microprocessor |
| Thermocouple Type | Type R (Platinum/Rhodium) |
| Compatible Tube OD | 25.4–76.2 mm (1–3 inch) |
| Heating Zone Length | 304.8 mm |
| Operating Temp Range | 500–1500°C |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Tube Furnace |
| Max Temperature | 1100°C |
| Temperature Control Accuracy | ±2–4°C |
| Max Power | 800 W |
| Heating Rate (to Max Temp) | 6–12°C/min |
| Heating Method | Resistive Wire (Kanthal A1) |
| Internal Chamber Dimensions | 381 × 279.4 × 406.4 mm |
| External Dimensions (H×D×W) | 381 × 279.4 × 406.4 mm |
| Voltage/Frequency | 208–240 V, 50/60 Hz |
| Net Weight | 16 kg |
| Thermocouple Type | K-type |
| Controller Options | Single-Setpoint or Multi-Step Programmable Controller |
| Operating Tube ID | 25.4 mm |
| Heated Zone Length | 304.8 mm |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Imported Benchtop Muffle Furnace |
| Model | M110 |
| Instrument Category | Box Furnace |
| Maximum Temperature | 1100°C |
| Temperature Uniformity | ±7°C |
| Control Accuracy | ±2–4°C |
| Max Power | 1400 W |
| Heating Rate (to 1100°C) | 6–12°C/min |
| Heating Method | Resistance Wire (Embedded in Grooved Ceramic Walls) |
| Internal Dimensions | 200 × 150 × 300 mm |
| Chamber Volume | 9 L |
| External Dimensions | 576 × 752 × 720 mm |
| Net Weight | 78 kg |
| Safety Certification | CE Marked |
| Insulation | Multi-layer Ceramic Fiber (Asbestos-Free) |
| Door Design | Horizontal Side-Opening |
| Thermal Architecture | Double-Wall Air-Gapped Casing |
| Over-Temperature Protection | Adjustable Limit Switch |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | BF51732 / BF51841 / BF51842 |
| Instrument Type | Box Furnace |
| Temperature Range | 100 °C to 1200 °C |
| Door Mechanism | Vertically Lifting Lid |
| Chamber Volume | 16.4 L |
| Control System | Integrated Digital Controller |
| Voltage/Frequency | 208–240 V, 50/60 Hz |
| Power Rating | 4500 W |
| Internal Dimensions (H×D×W) | 177.8 × 279.4 × 330.2 mm |
| Transport Weight | Approx. 130 kg |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Model | F1600 / F1700 / F1800 |
| Temperature Range | 150–1360 °C |
| Chamber Volume | 5.7–41.4 L |
| Construction | Heavy-duty refractory brick lining + reinforced steel cabinet |
| Heating Element Configuration | Four-wall embedded in refractory cement |
| Standard Floor Protection | Ceramic hearth plate |
| Power Supply | Requires external hardwiring |
| Controller | Sold separately |
| Safety Design | Top-hinged door with heat-shielded orientation (hot surface directed away from operator) |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Model | F30400 |
| Temperature Range | 100–1093 °C (up to 1200 °C short-term) |
| Chamber Volume | 45 L |
| Heating Element Layout | Top, Bottom, Left & Right Walls |
| Safety | 35 A Circuit Breaker + Interlocked Door Switch |
| Control Options | B1 (Single-Setpoint), C1 (8-Step Single Program), D1 (16-Step × 4 Programs, RS232) |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Box-Type Muffle Furnace |
| Model | F30400 |
| Maximum Temperature | 1200°C |
| Temperature Uniformity (at 1000°C) | ±3.45°C |
| Temperature Stability (at 1000°C) | ±1.2°C |
| Control Accuracy | ±2–4°C |
| Chamber Dimensions (W×H×D) | 360 × 360 × 360 mm |
| Chamber Volume | 45 L |
| Max Power | 5500 W |
| Heating Rate (to max temp) | 6–12°C/min |
| Heating Method | Resistance Wire Heating |
| Electrical Supply | 240 V, 50/60 Hz, 22.9 A |
| Weight (Shipping) | 117.9 kg |
| Safety | 35 A Circuit Breaker, Door-Interlocked Power Cut-off, Mechanical Over-Temperature Relay |
| Optional Accessories | Dual Removable Shelves (enabling up to 3× sample capacity) |
| Exhaust Port | 9.5 mm diameter rear port for external monitoring or venting |
| Compliance | Designed for GLP/GMP environments |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Crucible Muffle Furnace |
| Max Temperature | 975°C / 1093°C (with Inconel manifold) |
| Temperature Control Accuracy | ±2–4°C |
| Max Power | 5500 W |
| Heating Rate to Max Temp | 6–12°C/min |
| Heating Method | Resistance Wire Heating |
| Internal Dimensions | 360 × 360 × 360 mm / 330 × 180 × 250 mm |
| Chamber Volume | 45 L / 14 L |
| Compliance | ASTM D3174 |
| Control Options | B1 (single-setpoint), C1 (8-segment program), D1 (4×16-segment program + RS232) |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Model | F31700 |
| Temperature Range | 150–1093 °C |
| Chamber Volume | 254.4 L |
| Maximum Sample Load | 227 kg |
| Heating Rate (no load) | 0–870 °C in ≤120 min |
| Door Opening Mechanism | Gas Spring-Assisted Upward-Lifting |
| Safety Interlock | Automatic Power Cut-off Upon Door Opening |
| Heating Element Embedment | Refractory Cement |
| Floor Lining | Silicon Carbide Hearth |
| Base Support | Refractory Brick Bed |
| Structural Frame | Welded Steel Stand (Standard) |
| Controller | External (Not Included) |
| Electrical Connection | Required External Wiring |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Imported Benchtop Muffle Furnace |
| Model | F47900 / F48000 |
| Instrument Category | Box-Type Muffle Furnace |
| Max Temperature | 1200 °C |
| Temperature Uniformity (at 1000 °C) | ±4.8 °C (F47900) / ±3.6 °C (F48000) |
| Temperature Stability (at 1000 °C) | ±0.4 °C (F47900) / ±0.2 °C (F48000) |
| Operating Range | 100–1200 °C |
| Control Accuracy | ±2–4 °C |
| Max Power | 1000 W (F47900) / 1560 W (F48000) |
| Ramp Rate to Max Temp | 6–12 °C/min |
| Heating Method | Resistance Wire (Ni-Cr Alloy) |
| Internal Dimensions | 137 × 100 × 150 mm (F47900) / 180 × 130 × 250 mm (F48000) |
| Chamber Volume | 2 L / 5.8 L |
| External Dimensions (W×H×D, mm) | 285 × 470 × 390 / 560* (F47900, *door-open) / 340 × 490 × 500 / 685* (F48000, *door-open) |
| Net Weight | 18.5 kg / 27.2 kg |
| Power Supply | 240 V, 50/60 Hz |
| Current Draw | 4.2 A / 6.5 A |
| Standard Exhaust Port | Ø9.5 mm rear port |
| Optional Accessories | Ceramic shelf kit (dual-layer loading), independent thermocouple feedthrough |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Model | F47900 (2 L) / F48000 (5.8 L) |
| Temperature Range | 100–1200 °C |
| Chamber Volume | 2 L or 5.8 L |
| Heating Element Layout | Dual-side mounted |
| Max. Operating Temperature | 1200 °C |
| Rear Port Diameter | 9.5 mm |
| Control Options | A1 (single-setpoint), B1 (delayed ramp), C1 (8-segment single program), D1 (16-segment × 4 programs, RS232 interface) |
| Venting | Integrated exhaust port |
| Construction | Heat-treated ceramic chamber lining |
| Compliance | Designed for GLP-compliant thermal processing in analytical and materials laboratories |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Box-Type Muffle Furnace |
| Model | F6000 |
| Max Temperature | 1200°C |
| Temperature Uniformity (at 1000°C) | ±2.2°C |
| Temperature Stability (at 1000°C) | ±0.2°C |
| Control Accuracy | ±2–4°C |
| Max Power | 4400 W |
| Heating Rate (to 1200°C) | 6–12°C/min |
| Heating Method | Resistance Wire Heating |
| Internal Dimensions (W×H×D) | 330 × 180 × 250 mm |
| Chamber Volume | 14 L |
| External Dimensions (W×H×D) | 485 × 533 × 749 mm (with door open) |
| Net Weight | 60.8 kg |
| Safety Features | Door-Interlocked Power Cut-off, Thermocouple Fault Protection, Mechanical Over-Temperature Relay (on B1/C1/D1 variants) |
| Optional Accessories | Stainless Steel Shelf (max service temp: 900°C) |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Model | F6000 |
| Temperature Range | 100–1200 °C |
| Chamber Volume | 15 L |
| Heating Element Layout | Top, Bottom, Left & Right Walls |
| Standard Exhaust Port | 0.95 cm Diameter |
| Door Safety Interlock | Yes |
| Thermocouple Fault Protection | Yes |
| Control Options | A1 (Single Setpoint), B1 (Setpoint + Ramp Delay), C1 (8-Step Single Program), D1 (4 × 16-Step Programs with RS232) |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Manufacturer | Yes |
| Import Status | Imported |
| Type | Box-Type Muffle Furnace |
| Max Temperature | 1200 °C |
| Temperature Control Accuracy | ±2–4 °C |
| Rated Power | 2230 W |
| Ramp Rate to Max Temp | 6–12 °C/min |
| Heating Method | Resistance Wire Heating |
| Internal Chamber Dimensions (W×H×D) | 101 mm × 95 mm × 228 mm |
| Chamber Volume | 2.2 L |
| Operating Temperature Range | 100–1200 °C |
| Voltage/Frequency | 240 V, 50/60 Hz |
| Current Rating | 9.3 A |
| Net Weight | 23.5 kg |
| External Dimensions (W×H×D) | 279 mm × 457 mm × 419 mm (635 mm with door open) |
| Safety Port Diameter | 9.5 mm |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Model | FD1500 |
| Temperature Range | 100–1200 °C |
| Chamber Volume | 2.2 L |
| Heating Elements | 4 independent embedded in refractory cement |
| Safety Features | Door-activated power cutoff, dual overtemperature protection (mechanical relay + thermocouple fault detection), adjustable audible alarm |
| Interface Options | B1 (single-setpoint digital controller with ramp delay) or C1 (8-segment programmable digital controller) |
| Rear Port | 0.95 cm diameter for external temperature monitoring |
| Construction | Refractory brick-lined chamber with firebrick door seal |
| Power Cord | Included |
| Compliance | Designed for GLP-compliant weight loss and ashing workflows per ASTM E1868, ISO 1171, and USP <281> |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Model Variants | BF51731, BF51732, BF51841, BF51842 |
| Max Temperature | 1200°C |
| Temperature Uniformity | ±2°C @ 1200°C |
| Control Accuracy | ±0.3% of setpoint |
| Max Power | 4500 W |
| Ramp Time to 1200°C | 20 min |
| Heating Method | Calibrated tubular heating elements |
| Internal Dimensions (H×D×W) | 177.8 × 279.4 × 330.2 mm (BF517xx) / 381 × 381 × 381 mm (BF518xx) |
| External Dimensions (H×D×W) | 685.8 × 584.2 × 609.6 mm (BF517xx) / 838.2 × 711.2 × 736.6 mm (BF518xx) |
| Voltage/Frequency | 208–240 V, 50/60 Hz |
| Net Weight | 75 kg (BF517xx) / 127 kg (BF518xx) |
| Controller Options | Single-setpoint, multi-segment single-program, or multi-segment multi-program digital controllers with optional Over-Temperature Control (OTC), RS485 interface, and inert gas flow meter (FM) integration |
| Safety Features | Door-interlocked power cutoff, Platinel II R thermocouple, top 25.4-mm exhaust port, rear 9.5-mm inlet port |
| Insulation | Moldatherm® high-density ceramic fiber board with embedded LGO (Low-Glow Oxide) heating elements |
| Construction | Dual-wall steel housing with air-gap thermal barrier |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Line | Lindberg/Blue M |
| Temperature Range | 1100°C to 1700°C |
| Construction | Dual-wall steel housing with patented Moldatherm® ceramic fiber insulation |
| Heating Element | Patented LGO™ (Light Gauge Overbend) resistance wire |
| Controller Options | Integrated or remote-mounted microprocessor-based temperature controller |
| Compliance | Designed for GLP/GMP environments |
| Safety | Surface temperature ≤70% of industry-standard comparables under full-load operation |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Category | Imported Laboratory Equipment |
| Model | Thermolyne |
| Pricing | Available Upon Request |
| Brand | NYX |
|---|---|
| Origin | USA |
| Manufacturer | Humboldt Manufacturing Co. |
| Model | H-5025 |
| Compliance | ASTM D5025 |
| Construction | Nickel-plated die-cast alloy body |
| Gas Inlet | Serrated fitting |
| Flame Tube 1 | 9.5 mm OD × 20 mm L |
| Flame Tube 2 | 100 mm OD × 125 mm L |
| Dimensions (L×W×H) | 9 × 12 × 16 cm |
| Operating Gas | Industrial propane |
| Required Environment | Fume hood, ambient temperature 10–35 °C |
| Power Supply | None (gas-powered, non-electric) |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Type | Box-Type Muffle Furnace |
| Model | 2.5-10T/TP |
| Maximum Temperature | 1200 °C |
| Temperature Control Accuracy | ±5 °C |
| Heating Element | Resistance Wire |
| Internal Chamber Dimensions | 300 × 200 × 120 mm |
| Rated Power | 2.5 kW |
| Ramp Time to 1200 °C | ≤30 min |
| Insulation Material | High-Purity Ceramic Fiber |
| External Surface Temperature at 1000 °C Hold | ≤50 °C |
| Compliance | Designed for ASTM E1112, ISO 8573-1 (thermal stability class), GLP-compliant operation |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Model | FP-25 |
| Chamber Dimensions | 200 × 120 × 80 mm |
| Max Temperature | 1000 °C |
| Temperature Uniformity | ±2.5 °C |
| Rated Power | 2.5 kW |
| Voltage/Frequency | 220 V / 50 Hz |
| Heating Method | Ceramic Fiber Insulation |
| Weight | Lightweight Design |
| Compliance | CE-marked per IEC 61000-6-3 & IEC 61000-6-4 (EMC), EN 60519-1 (Electrical Safety for Industrial Electroheating Equipment) |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | FP-40 |
| Chamber Dimensions (W×D×H) | 300 × 200 × 120 mm |
| Internal Volume | 7.2 L |
| Max Operating Temperature | 1000 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 4 kW |
| Heating Method | Ceramic Fiber Insulation |
| Power Supply | 220 V / 50 Hz |
| Furnace Type | Box-Type Muffle Furnace |
| Weight | Lightweight Design for Mobility |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Model Variants | SX2-2.5-10T/TP, SX2-4-10T/TP, SX2-8-10T/TP |
| Maximum Temperature | 1000 °C |
| Operating Temperature Range | ≤950 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Rate | ≤50 °C/min (SX2-2.5 & SX2-8), ≤40 °C/min (SX2-4) |
| Chamber Dimensions (W×D×H) | 200×120×80 mm (2 L), 300×200×120 mm (7.2 L), 400×250×160 mm (16 L) |
| Heating Element | OCr25Al5 Fe-Cr-Al Alloy Wire |
| Power Supply | AC 220 V / 50 Hz (2.5 kW, 4 kW models) |
| Rated Power | 2.5 kW, 4 kW, or 8 kW |
| Insulation | High-Density Ceramic Fiber (Al₂O₃-SiO₂) |
| Control System | PID-Based Programmable Temperature Controller (30-segment or 60-segment ramp-soak profiles) |
| Compliance | JB/T 8195.7–2007 (Indirect Resistance Furnaces), GB/Z 18–2002 (Energy-Efficient Heat Treatment) |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Model | SX2-2.5-10N |
| Maximum Temperature | 1000 °C |
| Temperature Control Accuracy | ±2 °C |
| Rated Power | 2.5 kW |
| Heating Rate (to Max Temp) | ≤10 °C/min |
| Heating Element | High-Grade Resistance Wire (Ni-Cr Alloy) |
| Internal Chamber Dimensions | 120 × 200 × 80 mm (L×W×H) |
| Chamber Volume | 2 L |
| Voltage/Frequency | 220 V / 50 Hz |
| Furnace Liner Type | Refractory Brick |
| Enclosure Material | Stainless Steel (304) |
| Origin | South Korea |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TSA101, TSA102, TSA103 |
| Max Temperature | 450 °C |
| Operating Range | 50–400 °C |
| Ramp Rate | ≤60 min to reach +300 °C from ambient (spring/summer conditions) |
| Temperature Indication Accuracy | ±1.0 °C |
| Temperature Uniformity (Chamber) | ±1.0 °C |
| Max Sample Dimensions | 250 mm × 330 mm |
| Loading Port | 1 front-access door |
| Power Supply | 3-phase, 380 V AC |
| Total Electrical Capacity | 11 kW |
| External Dimensions (W×H×D) | ≈1340 mm × 1860 mm × 990 mm |
| Internal Chamber Material | SUS 316 stainless steel, 1.5 mm thickness |
| Sample Tray | 1 adjustable tray, SUS 304 |
| Tray Actuation | Motorized vertical lift mechanism |
| Circulation Fan | Dual-stage hot-air fan, Ø232 mm, SUS 316 construction |
| Temperature Controller | Digital PID controller, 0–450 °C range, LED display |
| Timer | Digital preset timer, 0–999.9 s resolution |
| Heating System | Nine external modular heating plates (1.0 kW each), total 9.0 kW |
| Heater Relay | Solid-state (contactless) relay |
| Air Velocity Control | Adjustable 1–5 m/s (default setpoint: 3 m/s) |
| Volumetric Airflow | 25 m³/min |
| Mobility | Four swivel casters with locking brakes |
| Thermal Insulation | Full-ceramic fiber blanket |
| Safety Features | Ambient air intake damper, digital over-temperature cut-off (0–450 °C), audible alarm for fault conditions, explosion-relief top safety door (instantly disconnects all power upon actuation), explosion-proof inverter-driven blower motor (1.5 kW), motor thermal protection relay, tray position lock, surface temperature monitoring probe |
| Thermal Mapping Validation | HEAT-LABBEL 9-point uniformity test compliant (±1 grid deviation on 200 mm × 300 mm reference plate |
| Net Weight | ≈800 kg |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | UHP1800 |
| Instrument Type | Box-Type Furnace |
| Max Temperature | 1800 °C |
| Temperature Control Accuracy | ±3 °C |
| Max Power | 25 kW |
| Ramp Time to Max Temp | 60 min |
| Heating Method | Resistive Wire (Molybdenum/Tungsten/Graphite/Tantalum) |
| Internal Chamber Dimensions | 2.54–35.56 cm (diameter/height adjustable per die configuration) |
| Max Applied Pressure | 30 ton (US short ton) |
| Base Vacuum Level | ≤5 × 10⁻⁵ Torr (with ion pump option) |
| Operating Atmosphere | High vacuum, N₂, H₂, Ar, or custom gas mixtures |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | UHP2500 |
| Instrument Type | Box-Type Hot Press Furnace |
| Max Temperature | 2500 °C |
| Temperature Control Accuracy | ±3 °C |
| Max Power | 35 kW |
| Ramp Time to Max Temp | ≤60 min |
| Heating Method | Resistive (Molybdenum, Tungsten Mesh, High-Purity Graphite, or Tantalum Elements) |
| Internal Chamber Dimensions | 2.54–35.56 cm (1″–14″ diameter), up to 30.48 cm (12″) depth |
| Pressure Range | 5–100 metric tons |
| Vacuum Range | 10⁻² to 10⁻⁶ Torr (at 2300 °C) |
| Gas Compatibility | N₂, H₂, Ar, vacuum, or controlled atmosphere (up to 2 PSIG at 2500 °C) |
| Structural Housing | Electropolished 304L stainless steel dual-wall chamber with viewport, thermocouple ports, and optical pyrometer access |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WMF-02 / WMF-02H |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1600 °C |
| Temperature Control Accuracy | ±1.5 °C |
| Rated Power | 3 kW |
| Heating Rate | Ambient +15 °C to 1600 °C |
| Heating Configuration | Triple-Sided Heating |
| Internal Chamber Dimensions | 140 × 150 × 140 mm (W × D × H) |
| Temperature Uniformity | ±1.5 °C at 1600 °C (per ISO 9001-compliant validation protocol) |
| Control System | PID with Digital Setpoint & Dual-Layer Safety Logic |
| Data Interface | RS232, RS485, RJ45 Ethernet, USB Host for Data Export |
| Safety Features | Independent Overtemperature Cut-off, Leakage Current Protection, Overload Protection, Password-Protected Parameter Lock, Passive Pressure Relief Vent |