Other Common Laboratory Equipment
Filter
Showing 121–150 of 1883 results
| Brand | AND/A&D |
|---|---|
| Origin | Japan |
| Model | 752AC1 / 752BC1 |
| Set Pressure Range | –0.06 to 0.3 MPa |
| Input Signal | 0–10 V / 4–20 mA (standard 10–5 V configurable) |
| Supply Pressure | Max. Output Range + 0.1 MPa |
| Power Supply | 24 VDC |
| Connection Port | 3/8″ |
| Compatible Fluid | Compressed Air (non-air media require external pilot type) |
| Sensor Type | Internal piezoresistive pressure sensor (752AC1) / External sensor interface (752BC1) |
| Input Impedance | ≥10 kΩ (voltage) / ≤300 Ω (current) |
| Mounting Orientation | Omnidirectional (no orientation-induced drift) |
| Control Algorithm | Force-Balance + Adaptive PID |
| Air Consumption | ≤1.5 L/min (low-flow variant) to ≤5 L/min (standard) |
| Weight | 1.8 kg |
| Insulation Resistance | ≥1 MΩ |
| Hysteresis | ≤±0.1% FS |
| Linearity | ≤±0.5% FS (sensor-dependent) |
| Response Time | <0.05 s (no-load) |
| Orifice Diameter | 11 mm |
| Body Material | ADC12 aluminum alloy (A2017 equivalent) |
| Diaphragm & Seal Material | NBR |
| Brand | ASAHI (A&D) |
|---|---|
| Origin | Japan |
| Model | 942BA1 / 943BA1 / 944BA1 |
| Operating Pressure Range | Up to 1.0 MPa |
| Max. Fluid Temperature | ≤150 °C |
| Wetted Materials | SUS316 Body, PTFE Diaphragm, Viton Seals |
| Control Principle | Force-Balance + PI Feedback Control |
| Input Signal Options | 0–10 V DC, 4–20 mA, or 10 V DC (configurable) |
| Supply Pressure Requirement | ≤⅔ of max. operating pressure + α (model-dependent) |
| Power Supply | 24 V DC |
| Flow Consumption | ≤1.5 L/min (standard), ≤5 L/min (high-speed variant) |
| Response Time (no-load) | <0.5 s |
| Linearity | ±1% FS |
| Hysteresis | ≤±0.2% FS |
| Resolution | ≤1/2000 of full scale |
| Electrical Isolation | >1 MΩ |
| Input Impedance | ≥1 kΩ (voltage), ≤300 Ω (current) |
| Connection Ports | 1/4″, 3/8″, 1/2″ NPT/Female |
| Orifice Diameter | 4 mm / 8 mm / 16 mm |
| Weight | 0.8 kg / 2.1 kg / 2.3 kg |
| Mounting Orientation | Omnidirectional (zero-point drift ≤±1% depending on orientation) |
| Brand | ASAHI Precision |
|---|---|
| Origin | Japan |
| Model | 601D-D05 |
| Measuring Principle | Differential Pressure (ΔP) Based Volumetric Flow Calculation |
| Wetted Materials | SUS316L |
| Operating Pressure Range | 100–300 kPa |
| Flow Range | 5–100 CCPM (mL/min) |
| Output Signal | 0–5 V DC |
| Supply Voltage | 24 V DC |
| Response Time | <1 ms |
| Ambient Temperature Range | 0–40 °C |
| Connection Port | G¼ (BSPP) |
| Weight | 700 g |
| Compliance | Designed for clean fluid applications including purified water systems |
| Sample Compatibility | Liquids compatible with SUS316L |
| Enclosure Rating | IP65 (typical for industrial transmitter housing) |
| Key | Brand: ASAHI Precision |
|---|---|
| Origin | Japan |
| Model | 635BA1 |
| Supply Pressure | Not required |
| Input Signal | 0–5 V DC (configurable to 0–10 V / 4–20 mA) |
| Output Pressure Range | 0–0.8 MPa |
| Power Supply | 24 V DC |
| Port Size | 1/8″ NPT (1/4″ available via model variant) |
| Operating Fluid | Compressed air only |
| Control Principle | Force-balance + digital PID |
| Response Time | < 0.05 s (no-load) |
| Hysteresis | ≤ ±0.05% FS |
| Linearity | ≤ ±0.3% FS (sensor-dependent) |
| Flow Consumption | ≤ 1.5 L/min (standard) |
| Weight | 0.8 kg |
| Insulation Resistance | ≥ 1 MΩ |
| Diaphragm Material | NBR |
| Body Material | ADC12 aluminum alloy |
| Seal Material | NBR |
| Sensor Interface | Analog voltage (≥10 kΩ input impedance) or current (≤300 Ω input impedance) |
| Mounting Orientation | Omnidirectional (no orientation-induced drift) |
| Orifice Diameter | 4 mm |
| Compliance | CE-marked |
| Brand | ASAHI Precision |
|---|---|
| Origin | Japan |
| Model | 6640AA1 |
| Supply Pressure Range | Up to 0.85 MPa (max input = set range + 0.05 MPa) |
| Output Pressure Range (Selectable) | 0–0.8 MPa (AA1), 0–0.3 MPa (AB1), 0–0.1 MPa (AD1), 0–1.0 MPa (AH1) |
| Input Signal | 0–5 V DC (optional: 0–10 V DC or 4–20 mA, specify at order) |
| Power Supply | 24 V DC ±10% |
| Sensor Type | Built-in pressure sensor (A-series) or external analog sensor interface (B-series, supports pressure/flow/position sensors) |
| Input Impedance | ≥10 kΩ (voltage), ≤300 Ω (current) |
| Hysteresis | ≤±0.05% FS |
| Linearity | ≤±0.3% FS (sensor-dependent) |
| Response Time (no-load) | <0.05 s |
| Flow Consumption | ≤1.5 L/min (standard), ≤5 L/min (high-speed variant) |
| Orifice Diameter | 4 mm |
| Weight | 0.8 kg |
| Housing Material | ADC12 aluminum die-cast |
| Internal Components | A2017 aluminum alloy, SUS304 stainless steel |
| Diaphragm | NBR or Viton® |
| Seals | Viton® |
| Insulation Resistance | >1 MΩ |
| Mounting Orientation | Omnidirectional (no orientation-induced drift) |
| Fluid Compatibility | Compressed air (non-air media require externally piloted configuration) |
| Brand | ASAHI Precision (A&D) |
|---|---|
| Origin | Japan |
| Model | 735BB1 |
| Pressure Range | 0–0.3 MPa |
| Input Signal | 0–5 V DC (configurable to 0–10 V or 4–20 mA) |
| Supply | External pilot pressure required, no internal air supply |
| Power | 24 V DC |
| Port Size | 3/8″ NPT |
| Valve Body Material | ADC12 aluminum alloy |
| Diaphragm & Seal Material | NBR standard (Viton, Teflon, polyurethane optional) |
| Orifice Diameter | 11 mm |
| Response Time | <0.05 s (no-load) |
| Hysteresis | ≤ ±0.05% FS |
| Linearity | ≤ ±0.3% FS (sensor-dependent) |
| Consumption | ≤1.5 L/min (standard), up to 5 L/min (high-speed variant) |
| Weight | 1.8 kg |
| Insulation Resistance | >1 MΩ |
| Mounting Orientation | Omnidirectional (no orientation-induced drift) |
| Sensor Compatibility | External analog sensors — pressure (voltage/current), flow, position (0–10 V or 4–20 mA) |
| Control Principle | Force-balance + digital PID algorithm |
| Operating Fluid | Compressed air only (external pilot-controlled relief mode) |
| Brand | A&D (AND) |
|---|---|
| Origin | Japan |
| Model | 913BA1 / 914BA1 / 916BA1 |
| Operating Pressure Range | Up to 1.5 MPa |
| Input Signal | 0–10 V DC, 4–20 mA (configurable) |
| Pilot Pressure | 0.3 MPa |
| Supply Voltage | 24 V DC |
| Port Size | 1/4", 3/8", 1/2" |
| Fluid Compatibility | Liquids and gases non-corrosive to PTFE, Viton®, and brass |
| Input Impedance | ≥1 kΩ (voltage), ≤300 Ω (current) |
| Control Principle | Force-Balance + PI Algorithm |
| Hysteresis | ≤±0.2% FS |
| Linearity | ≤±1% FS |
| Response Time | <0.5 s (no-load) |
| Flow Consumption | ≤1.5 L/min (standard), ≤5 L/min (high-speed) |
| Weight | 2.2 kg / 3.4 kg / 6.8 kg |
| Valve Body Material | Brass |
| Diaphragm | PTFE |
| Seal Material | Viton® |
| Insulation Resistance | >1 MΩ |
| Mounting Orientation | Omnidirectional (zero-point drift ≤±1% FS dependent on orientation) |
| Orifice Diameter | 6 mm / 10 mm / 14 mm |
| Brand | ASAHI Precision (A&D) |
|---|---|
| Origin | Japan |
| Model | 944BA1 |
| Operating Pressure Range | Up to 1.0 MPa |
| Input Signal Options | 0–5 V, 0–10 V, or 4–20 mA (configurable via model suffix) |
| Pilot Pressure Requirement | ≤ 2/3 × max. operating pressure + α |
| Power Supply | 24 VDC |
| Port Size | 1/2″ |
| Fluid Compatibility | Liquids and gases non-corrosive to PTFE, Viton®, and brass |
| Diaphragm Material | PTFE |
| Seal Material | Viton® |
| Valve Body Material | Brass |
| Full-Scale Orifice Diameter | Φ16 mm |
| Zero Drift | ±1% FS (orientation-dependent) |
| Control Principle | Force-balance + PI feedback control |
| Hysteresis | ≤ ±0.2% FS |
| Linearity | ≤ ±1% FS |
| Response Time (no-load) | < 0.5 s |
| Air Consumption | ≤ 5 L/min (high-speed variant) |
| Weight | 2.3 kg |
| Insulation Resistance | > 1 MΩ |
| Input Impedance | ≥ 1 kΩ (voltage), ≤ 300 Ω (current) |
| Brand | ASAHI Precision |
|---|---|
| Origin | Japan |
| Model | S650SML / S650SMH |
| Pressure Range (S650SML) | 3.5–700 kPa |
| Pressure Range (S650SMH) | 12.5–2500 kPa |
| Set Resolution | 0.01 kPa (S650SML), 0.1 kPa (S650SMH) |
| Input Signal | 0–10 V DC |
| Supply Pressure | 800 ± 20 kPa (S650SML), 3000 ± 200 kPa (S650SMH) |
| Accuracy | ±0.14% FS |
| Zero & Span Temp. Coefficient | ±0.018% FS/°C |
| Display | 5-digit LED (kPa) |
| Control Principle | Force-Balanced Electrostatic Capacitance Sensing with PI Feedback |
| Supply Voltage | 24 V DC |
| Power Input | 100 V AC |
| Warm-up Time | ≤30 min |
| Operating Temperature | 5–40 °C |
| Dimensions (W×D×H) | 280 × 210 × 133 mm |
| Weight | ~3 kg |
| Inlet/Outlet Port | Rc 1/4 (S650SML), Rc 3/8 (S650SMH) |
| Orifice Diameter | Φ4 mm (S650SML), Φ11 mm (S650SMH) |
| Max. Consumption Flow | ≤1.5 L/min |
| Insulation Resistance | ≥1 MΩ |
| Brand | ASAHI |
|---|---|
| Origin | Japan |
| Model | S670S0.3 / S670S1 |
| Input Voltage | DC 24 V |
| Supply Pressure Range (Primary) | 60–150 kPa (S670S0.3) / 140–200 kPa (S670S1) |
| Output Pressure Range (Secondary, Adjustable) | 0.15–30.00 kPa (S670S0.3) / 0.5–100.00 kPa (S670S1) |
| Max. Supply Pressure | 150 kPa / 200 kPa |
| Pressure Sensor Type | Piezoresistive Silicon |
| Display | 4-digit LED (character height 10 mm) |
| Accuracy | ±1% FS |
| Response Time | ≤5 s |
| Operating Temperature | 0–40 °C |
| Interface | Φ6 push-to-connect fittings |
| Remote Analog Input Options | 0–5 V, 0–10 V, or 4–20 mA (model-suffix coded) |
| Output Flow Rate | 0–50 nL/min |
| Dimensions (W×H×D) | 96×96×138.5 mm |
| Weight | ~1.2 kg |
| Fluid Compatibility | Dry air only |
| Compliance | CE-marked for industrial use (IEC 61000-6-2/6-4), RoHS compliant |
| Brand | Asida |
|---|---|
| Model | XG5130A |
| Origin | Guangdong, China |
| Type | Online, Fully Automated X-ray Inspection System |
| Application | In-line Quality Control of Prismatic Pouch Lithium-ion Battery Cells |
| X-ray Source | Microfocus Tube (90 kV, 89 µA, 5 µm focal spot) |
| Imaging System | Dual-FOV Image Intensifier (2″/4″), 75–110 lp/cm resolution, X-CCD sensor (752 × 480 px) |
| Throughput | ≥30 ppm (≥30,000 units/day) |
| Measurement Repeatability | ±60 µm |
| False Positive Rate | ≤2% |
| Miss Detection Rate | 0.0% |
| Overall Yield Accuracy | ≥99.5% |
| Radiation Leakage | ≤1 µSv/hr (compliant with IEC 61000-6-4 and IEC 62471) |
| Brand | HENGYU |
|---|---|
| Model | ASTM D 2097 |
| Standard Compliance | ASTM D 2097, GM 9226P / 9216P, Ford FLTM BN 102-02, MF-MH BN2-2, TSL5101G Section 3.14.1 B |
| Dimensions (L×W×H) | 60 × 40 × 40 cm |
| Weight | 80 kg |
| Power Supply | AC 220 V, 50 Hz, 500 W |
| Operating Environment | 20 ± 2 °C, 65 ± 4 % RH |
| Configuration | Main Unit × 1, User Manual × 1 |
| Brand | Atmos |
|---|---|
| Origin | Germany |
| Model | ATMOS |
| Measurement Principle | Gravimetric Calibration (ISO 8655-compliant) |
| Display | 7-inch Full-Color Touchscreen |
| Data Export | CSV, PDF, XML |
| Compliance | ISO 8655-6, ASTM E2791, GLP/GMP Audit Trail Ready |
| Connectivity | USB, Ethernet, Optional Wi-Fi |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Dimensions | 320 × 280 × 210 mm |
| Weight | 4.8 kg |
| Environmental Operating Range | 15–30 °C, 30–70% RH (non-condensing) |
| Brand | -- |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | AT650T / AT-Ozone Generator / AT650P / AT200M |
| Pricing | Upon Request |
| Brand | ATR |
|---|---|
| Origin | USA |
| Model | SLE 350 |
| Cooling Technology | Semiconductor-based Condensation |
| Minimum Operating Temperature | −20 °C |
| Form Factor | Benchtop / Fume Hood Compatible |
| Automation Level | Fully Automatic (One-Touch Operation) |
| Integrated Liquid-Level Detection | Yes |
| Compatibility | Universal Interface for Rotary Evaporators, Nitrogen Blow-Down Concentrators, and Other Solvent-Generating Instruments |
| Brand | Auniontech |
|---|---|
| Model | AUTFS1 |
| Measurement Principle | Null-Null Ellipsometry (LED-based, Fixed-Optic Configuration) |
| Wavelengths | 465 nm, 525 nm, 580 nm, 635 nm (High-Stability LEDs) |
| Spot Size Options | 0.8 × 1.9 mm or 0.3 × 0.7 mm (with optional focusing optics) |
| Measurement Speed | ≤1 s per acquisition |
| Thickness Range (Transparent Films) | 0–1000 nm (sub-Å resolution for ultra-thin layers) |
| Optical Parameters Output | n(λ), k(λ), film thickness (d), surface roughness (optional modeling), multilayer stack parameters |
| Detector Type | Solid-state, no moving parts, phase-resolved PSD |
| Compliance | Designed for GLP-compliant thin-film metrology workflows |
| Software | Windows-based analysis suite with regression modeling, multi-wavelength global fitting, and export to CSV, XML, and HDF5 formats |
| Brand | Auniontech |
|---|---|
| Model | CREVIS |
| Sensor | Sony CMOS (2/3″, 2464 × 2056) |
| Interface | Camera Link Full |
| Frame Rate | 163 fps (full resolution) |
| Pixel Size | 3.45 µm × 3.45 µm |
| Output Formats | Intensity (S₀), Degree of Linear Polarization (DoLP), Angle of Polarization (AoP), and four linear polarization states (0°, 45°, 90°, 135°) |
| Pixel Format | Mono8/10, Bayer8/10, RGB8Polarization, RGB8Degree |
| ADC | 8/10-bit |
| Analog Gain | 0–24 dB (1×–15.8×), Digital Gain: 0–18 dB (1×–8×) |
| Shutter Mode | Global |
| Sync | Internal, External, or via Frame Grabber |
| Lens Mount | C-mount |
| Power | 12–24 VDC ±10% or PoCL |
| Power Consumption | 2.2 W |
| Dimensions | 29 × 29 × 29 mm |
| Weight | < 50 g |
| Operating Temperature | 0–40 °C |
| Storage Temperature | −5–45 °C (20–80% RH) |
| Brand | Auniontech |
|---|---|
| Wavelength | 632.8 nm |
| Output Power Range | 0.5–35 mW |
| Laser Type | Single-Longitudinal-Mode (SLM) Gas Laser |
| Operating Medium | Helium–Neon Mixture |
| Polarization | Linear, >500:1 |
| Beam Diameter (1/e²) | ~0.65 mm |
| Beam Divergence (full angle) | <1.5 mrad |
| Coherence Length | >20 cm (typical for SLM operation) |
| Warm-up Time | <15 min to stable output |
| Lifetime | >20,000 hours (MTBF) |
| Origin | Shanghai, China |
| Compliance | CE-marked per EN 60825-1:2014 (Class 3B Laser Product) |
| Brand | Auniontech |
|---|---|
| Model | ISX-5 |
| Channels | 2–8 (expandable via modular chassis) |
| Frequency Range | DC to 10 MHz |
| Impedance Range | 1 mΩ to 1 GΩ |
| DC Bias | ±8 V |
| Measurement Points per Sweep | up to 2048 |
| Accuracy | ±0.1% + residual error |
| Synchronization | Hardware-level channel-to-channel sync |
| Interface Options | BNC, SMA, MCX, D-Sub, digital I/O port, optional wireless module |
| Compliance | Designed for GLP/GMP environments with audit-ready configuration logging |
| Optional Modules | Temperature monitoring (RTD/thermistor/TC), programmable DC bias, high-voltage/current extensions, custom multiplexer integration |
| Brand | Auniontech |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | NanoPore Reader |
| Pricing | Available Upon Request |
| Brand | Autobio |
|---|---|
| Model | AutoMimo1200 |
| Origin | Henan, China |
| Instrument Type | Benchtop Automated Sample Dispensing System |
| Throughput | Up to 800 assay positions per hour |
| Compliant with ISO 13485 | 2016 Quality Management System |
| Brand | Colintech |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (China) |
| Model | AutoS 50 |
| Pricing | Upon Request |
| Brand | AWA |
|---|---|
| Model | AWA5000 |
| Compliance | GB/T 3785.1–2023 / IEC 61672-1:2013 Class 1 |
| Standard Conformance | HJ 907–2017 |
| Dynamic Range | 123 dB |
| Display | 4.3-inch capacitive touchscreen |
| Internal Storage | 16 GB (expandable to 64 GB via microSD) |
| Communication | Wi-Fi, 4G LTE, Bluetooth |
| Positioning | Integrated GPS + network-assisted positioning |
| Audio Recording | High-fidelity time-stamped PCM recording |
| Frequency Analysis | Real-time 1/1 and 1/3-octave band analysis |
| Power Supply | Integrated outdoor-rated power management system |
| Optional Modules | Meteorological sensor suite, traffic flow counter, PTZ camera, LED display panel, acoustic source localization unit |
| Brand | Hangzhou Aihua |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AWA2000 |
| Pricing | Available Upon Request |
| Translation Stage | Consult Manufacturer |
| Brand | AZZOTA |
|---|---|
| Origin | USA |
| Model | BHY-205002 |
| Die Inner Diameter | 13 mm |
| Maximum Applied Load | 12 tons |
| Die Outer Diameter | 44.5 mm |
| Height | 71 mm |
| Mass | 0.67 kg |
| Material | High-grade stainless steel |
| Includes | Polished die sleeve (mirror-finish), vacuum base with sealing O-ring, plunger with O-ring, two polished anvils, and ejection tool |
| Brand | AZZOTA |
|---|---|
| Origin | USA |
| Model | BHY-81A |
| Working Pressure | 60 MPa (20 tons) |
| Clamp Travel Range | 0–12 cm |
| Platen Stroke | 4.5 cm |
| Platen Diameter | 10 cm |
| Pressure Gauge Range | 0–100 MPa |
| Dimensions (W×D×H) | 35 × 25 × 40 cm |
| Net Weight | 48 kg |
| Die Diameter | 13 mm (customizable) |
| Brand | AZZOTA |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | BHY-81B Laboratory Hydraulic Pellet Press |
| Working Pressure | 60 MPa (20 ton force) |
| Clamp Travel Range | 0–10 cm |
| Platen Stroke | 4.5 cm |
| Platen Diameter | 10 cm |
| Pressure Gauge Range | 0–100 MPa |
| Dimensions (W×D×H) | 30 × 25 × 35 cm |
| Net Weight | 30 kg |
| Die Diameter | 13 mm (customizable) |
| Construction | Stainless steel platens |
| Operation | Manual |
| Display | Analog pressure gauge with real-time reading |
| Brand | Bar Control |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Industrial Pressure Switch |
| Model | PDL Series (Pneumatic) |
| Operating Principle | Mechanical Diaphragm-Actuated Snap-Action Switch |
| Contact Material | Pure Silver |
| Sealing Material | PTFE-Coated Piston |
| Repeatability | ±2.0% FS |
| Hysteresis Adjustment | Continuously Adjustable via External Knob |
| Electrical Rating | 250 VAC / 6 A (resistive), 30 VDC / 2 A (inductive) |
| IP Rating | IP65 |
| Process Connection | G¼" BSP Male |
| Media Compatibility | Compressed Air, Inert Gases, Vacuum (down to -0.95 bar) |
| Temperature Range | -20 °C to +80 °C |
| Certifications | CE, RoHS, UL Recognized (E487617) |
| [Brand | Beifen Sanpu |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic Instrumentation |
| Model | HW-19L-1 |
| Power Supply | 220 V AC / 50 Hz or DC 12 V vehicle power |
| Heating Power | 90–110 W |
| Temperature Range | Ambient to 100 °C |
| Capacity | 19 L |
| Internal Dimensions | 38 × 18 × 25 cm |
| External Dimensions | 44 × 30 × 35 cm |
| Net Weight | ~5 kg |
| Heating System Lifetime | ≥8,000 h continuous operation |
| Construction | ABS exterior shell, aluminum inner chamber, polyurethane foam insulation |
| Heating Method | Five-sided circumferential convection heating |
| Control Interface | One-touch 100 °C preset + up/down digital temperature adjustment |
| Accessories | Integrated carrying handle and detachable shoulder strap] |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | Q-CL501A |
| Price | Upon Request |
| Detection Parameters | Chlorine Dioxide (ClO₂), Chlorite (ClO₂⁻) |
| Detection Method | DPD Spectrophotometry (ASTM D6503-compliant) |
| Resolution | 0.01 mg/L |
| Range | ClO₂: 0.02–10.00 mg/L |
| ClO₂⁻ | 0.00–2.00 mg/L |
| Accuracy | ±3% RSD + 0.01 mg/L (full scale) |
| Dimensions | 160 × 62 × 30 mm |
| Weight | 0.15 kg |
| Power Supply | 2 × AA alkaline batteries |