Other Common Laboratory Equipment
Filter
Showing 1801–1830 of 1883 results
| Brand | Wisman |
|---|---|
| Model | SEM Series |
| Output Voltage | Up to ±35 kV (configurable per channel) |
| Max. Output Power | 6 W |
| Input | AC 220 V ±5% |
| Ripple | ≤10 ppm (main acceleration supply) |
| Load Regulation | <±100 ppm |
| Line Regulation | <±100 ppm |
| Temp. Coefficient | 100 ppm/°C (acceleration supply) |
| Stability | 10 ppm/3 min (after 1-hr warm-up) |
| BIAS Output | 0 to –2000 V, 0–150 µA |
| Filament Supply | 0–3 A, 1 Ω load |
| Optional Outputs | SCI (0–10 kV), COL (0–400 V), PMT (0–1500 V) |
| Cooling | Forced air (front intake / rear exhaust) |
| Operating Temp. | 0–40 °C |
| Storage Temp. | –40 to +85 °C |
| Humidity | 10–90% RH, non-condensing |
| Weight | 5 kg |
| Compliance | Designed for integration into electron microscopy and mass spectrometry systems per IEC 61010-1, EN 61326-1 (EMC), RoHS |
| Brand | Wisman |
|---|---|
| Model | TA |
| Output Voltage | Up to 600 kV DC |
| Output Power | 2 kW |
| Ripple | 0.05% P-P + 1 Vrms |
| Stability | <0.05% per 8 hours |
| Temperature Coefficient | 25 ppm/°C |
| Input | AC 220 V ±10%, 15 A (AC 110 V optional) |
| Remote Control | Analog (0–10 V), RS-232, RS-485, Ethernet optional |
| Cooling | Forced air |
| Insulation | Air-insulated tower architecture |
| Compliance | Designed for industrial and research-grade HV applications requiring IEC 61000-4 immunity, EN 61326-1 (EMC), and GLP-aligned operational traceability |
| Brand | Wisman |
|---|---|
| Model | TC |
| Output Voltage | Up to 600 kV DC |
| Output Power | Up to 100 kW (multi-unit parallel configuration) |
| Ripple | 0.005% P-P + 1 Vrms |
| Stability | <0.05% over 8 hours |
| Temperature Coefficient | 25 ppm/°C |
| Input | 3-phase AC, 187–228 V RMS, 48–63 Hz |
| Remote Control Interfaces | Ethernet, RS-232, RS-485, analog 0–10 V |
| Cooling | Forced air |
| Insulation | Air-insulated tower architecture |
| Compliance | Designed for IEC 61010-1, EN 61326-1 (EMC), and GLP/GMP-aligned test environments |
| Application Domain | X-ray generation, particle acceleration, pulsed power, ion/electron beam systems, CVD/PECVD biasing, high-voltage insulation testing, and scientific research |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | WondaPak QuEChERS Series |
| Pricing | Available Upon Request |
| Brand | WTW |
|---|---|
| Origin | USA |
| Distributor Type | Authorized Distributor |
| Product Origin | Imported |
| Model | WTW pH Accessories and Consumables |
| Price Range | USD 280 – 8,500 |
| Brand | CEI (Zhongjiao Jinyuan) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Lamp Producer |
| Model | 500WXL, 350WXL |
| Rated Power | 500 W / 350 W |
| Color Temperature | ~6000 K |
| Spectral Output | Continuous in Visible Range (380–780 nm) |
| CRI (Ra) | ≥94 |
| Arc Stability | <±1.5% RMS Intensity Fluctuation |
| Ignition Time to 90% Max Output | <30 s |
| Arc Spot Diameter | ≤0.8 mm |
| Rated Lifetime | ≥800 h (at rated power, stable cooling, recommended ballast) |
| Brand | Jianhu |
|---|---|
| Model | JH |
| Light Source | Water-Cooled Xenon Arc Lamp |
| Maximum Irradiance | ≥2× Solar Intensity (0.34–0.40 W/m²·nm @ 340 nm) |
| Exposure Area | Up to 6500 cm² |
| Black Panel Temperature Range | 30–110°C |
| Black Standard Temperature Range | 25–100°C |
| Relative Humidity Control Range | 10–95% RH |
| Cooling Method | Closed-Loop Water-Cooled System |
| Filter Systems | Inner & Outer Quartz Filters for Spectral Adjustment |
| Water Quality Monitoring | Conductivity-based Real-Time Monitoring with Alarm |
| Compliance | ASTM G155, ISO 4892-2, SAE J2527, GB/T 16422.2, BGD 862/863 |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | YC-10L |
| Pricing | Upon Request |
| Extractor Volume | 10 L (effective) |
| Condenser Area | 0.5 m² |
| Vacuum Range | 0 to −0.08 MPa |
| Temperature Control | PID, ±2 °C accuracy |
| Heating Method | Jacketed thermal oil circulation (pressureless) |
| Material of Construction | 316L stainless steel (wetted parts) |
| Cooling Water Consumption | 0.5 t/h at < 0.3 MPa pressure |
| Power Supply | 3-phase, 380 V, 50 Hz (customizable) |
| Optional | Integrated ultrasonic extraction module (15–60 kHz, titanium alloy transducer) |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | YC-210 |
| Pricing | Upon Request |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | TE100 |
| Compliance | ISO 4825-1:2023-01 |
| Sample Size | 30 × 30 mm |
| Load Force | 10 kg |
| Temperature Resolution | ≥0.01 °C |
| Thermal Resistance Measurement Accuracy | ±0.1 mΩ (70–130 Ω range) |
| Sampling Rate | 100 samples/sec (max) |
| TEG Chip Dimensions | 5 × 5 × 0.35 mm |
| TEG Heat Generation Density | 1 kW/cm² |
| Max Input Power | ~250 W |
| Thermal Ramp Rate | 1.4 × 10⁴ K/sec |
| Controller Dimensions | W380 × D470 × H180 mm |
| Measurement Unit Dimensions | W380 × D400 × H320 mm |
| External Circulator | NeoCool CFA302 (Closed-loop, air-cooled) |
| Circulator Temp Range | −10 to +60 °C |
| Circulator Power Supply | AC 100 V, 13.8 A |
| Circulator Dimensions | W380 × D565 × H725 mm |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | YYK500/750/800/900 |
| Quotation | Upon Request |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | RE-2000A (Standard Configuration) |
| Quotation | Available upon Request |
| Display | Dual-color LCD touchscreen (main unit + water bath) |
| Control Interface | Rotary encoder + membrane keypad |
| Communication | RS485 inter-device synchronization |
| Temperature Range | Ambient to 99 °C (PID-controlled) |
| Temperature Accuracy | ±1 °C in water bath |
| Rotational Speed | 0–200 rpm (frequency-converter driven) |
| Timer Range | 0–99 h 59 min |
| Automatic Lift Stroke | 0–150 mm (track-guided, shock-free) |
| Condenser Type | Dual-reflux spherical-joint condenser |
| Condensing Area | 0.15 m² |
| Evaporation Rate (H₂O) | ≥1.2 L/h |
| Bath Capacity | 4 L PTFE-coated stainless steel |
| Compatible Flask Sizes | 50–2000 mL (conical ground-glass joint) |
| Heating Power | 1200 W |
| Motor Power | 40 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Dimensions (W×D×H) | 450 × 400 × 850 mm |
| Net Weight | 36 kg |
| Sealing Material | High-elasticity PTFE gaskets |
| Safety Features | Transparent polycarbonate bath cover, overheat protection, auto-stop on lift limit |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | RE-2000B |
| Price | Upon Request |
| Lift Mechanism | Motorized vertical lift (0–150 mm) |
| Rotational Speed Range | 0–200 rpm |
| Bath Capacity | 4 L |
| Compatible Flask Sizes | 50–2000 mL |
| Heating Power | 1.2 kW |
| Temperature Control Range | Ambient to 99 °C |
| Temperature Accuracy | ±1 °C |
| Condenser Surface Area | 0.15 m² |
| Evaporation Rate (Water) | ≥1.2 L/h |
| Motor Power | 40 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Bath Material | PTFE-coated aluminum alloy |
| Safety Enclosure | Fully transparent polycarbonate shield |
| Housing Material | Aluminum alloy + high-strength engineering polymers |
| Display | Digital LED temperature readout |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Model | RE-3000A |
| Temperature Range | Ambient to 99 °C (±1 °C water bath accuracy) |
| Rotational Speed | 0–200 rpm (frequency-controlled) |
| Vacuum Control Range | −0.01 to −0.095 MPa (built-in electromagnetic valve, ±0.2–0.5% accuracy) |
| Condenser Type | Dual-reflux ground-glass condenser with 0.15 m² cooling area |
| Evaporation Rate (H₂O) | ≥1.5 L/h |
| Bath Capacity | 8 L (compatible with 50–3000 mL flasks) |
| Heating Power | 1200 W |
| Motor Power | 40 W |
| Dimensions (W×D×H) | 450×420×850 mm |
| Weight | 40 kg |
| Display | Dual-color LCD screens (main control unit + bath unit) |
| Communication Interface | RS485 for synchronized system control |
| Sealing Material | High-elasticity PTFE |
| Bath Liner | PTFE-coated stainless steel with transparent polycarbonate safety shield |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Model | RE-3000B |
| Lift Mechanism | Motorized vertical adjustment (0–150 mm) |
| Rotational Speed Range | 0–200 rpm |
| Water Bath Capacity | 8 L |
| Compatible Flask Sizes | 50–3000 mL |
| Heating Power | 1.2 kW |
| Temperature Control Range | Ambient to 99 °C |
| Temperature Accuracy | ±1 °C |
| Condenser Surface Area | 0.15 m² |
| Evaporation Rate (H₂O) | ≥1.2 L/h |
| Motor Power | 40 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Bath Material | PTFE-coated stainless steel |
| Safety Features | Full transparent polycarbonate safety shield |
| Display | Digital temperature readout with auto-control |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | RE-3000D |
| Pricing | Upon Request |
| Drive Mechanism | Electronically Controlled Stepless Speed Regulation |
| Speed Range | 0–200 rpm |
| Heating Bath Capacity | 8 L |
| Bath Material | PTFE-Coated Stainless Steel |
| Heating Power | 1.2 kW |
| Bath Temperature Control | Digital PID, 0–99 ±1 °C |
| Motor Power | 40 W |
| Vertical Lift Range | 0–150 mm (Motorized Auto-Adjustment) |
| Condenser Type | Cold-Finger Dry Ice Condenser with Spiral Coiled Design |
| Cooling Medium | Dry Ice / Ethanol or Liquid Nitrogen |
| Evaporation Flask Compatibility | 50–3000 mL (Standard Taper Ground Glass Joints) |
| Collection Flask | Detachable, Standard Taper Joint |
| Feed Tube | Valve-Controlled PTFE Tubing with Flow Regulator |
| Sealing System | Fluoroelastomer (FKM) Vacuum Gaskets |
| Safety Enclosure | Full-Height Transparent Acrylic Shield |
| Dimensions (W×D×H) | 450 × 420 × 850 mm |
| Power Supply | 220 V AC, 50 Hz |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | RE-5210A |
| Pricing | Available Upon Request |
| Rotating Flask Capacity | 10 L (Φ75 mm standard taper joint) |
| Collecting Flask Capacity | 5 L |
| Temperature Control Range | Ambient to 99 °C ±1 °C (PID digital display) |
| Rotation Speed | 0–138 rpm (frequency-controlled, imported inverter, digital readout) |
| Vacuum Range | –0.01 to –0.095 MPa (accuracy: ±0.2–0.5%) |
| Rotating Motor | 120 W single-phase AC induction motor (220 V / 50 Hz) |
| Condenser Type | Vertical dual-reflux high-efficiency condenser |
| Water Bath | One-piece stainless steel, motorized vertical lift (0–180 mm travel) |
| Heating Power | 3000 W |
| Dimensions (W×D×H) | 950 × 550 × 1650 mm |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Model | RE-5250 |
| Evaporation Flask Capacity | 50 L (125 mm neck diameter) |
| Collection Flask Capacity | 20 L (dual 10 L flasks) |
| Rotation Speed Range | 0–70 rpm (variable-frequency drive) |
| Evaporation Rate | >9 L/h (water, at optimal conditions) |
| Vacuum Display | Dual analog gauge + digital display (<100 Pa) |
| Vacuum Control | Solenoid valve with pressure sensor feedback |
| Heating Bath Temperature Range | Ambient to 99 °C (±1 °C accuracy) |
| Heating Power | 2 × 4.5 kW (stainless steel 316 immersion heaters) |
| Bath Dimensions | 560 × 300 mm |
| Bath Material | SUS304 stainless steel |
| Lift Mechanism | Automatic cantilever-type vertical lift (0–320 mm travel) |
| Cooling System | Integrated air-cooling for motor and electronics |
| Filtration | GG-17 borosilicate glass vacuum trap with built-in particulate barrier |
| Overall Dimensions (L×W×H) | 1200 × 800 × 2220 mm |
| Power Supply | 380 V AC, 3-phase, 25 A |
| Compliance | Designed per IEC 61010-1 safety standards for laboratory equipment |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Model | RE-52AA |
| Rotational Speed Range | 0–150 rpm (digital display, electronic stepless adjustment) |
| Temperature Control Range | Ambient to 99 °C ±1 °C |
| Heating Power | 1000 W |
| Bath Type | Stainless steel square heating bath with PTFE coating |
| Bath Dimensions | Square, uniform temperature distribution |
| Vertical Condenser | Dual-flow reflux design with large-diameter condensing tube and evaporation tube |
| Lift Mechanism | Manual + motorized vertical lift, 0–120 mm travel |
| Cooling System | Air-cooled or external coolant-compatible (not integrated) |
| Vacuum Requirement | External vacuum pump required (e.g., SHZ-III type) |
| Safety Enclosure | Full-height transparent polycarbonate guard |
| Net Weight | 20 kg |
| Voltage | 220 V AC |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Model | RE-52CS-1 |
| Temperature Range | Ambient to 99 °C (±1 °C) |
| Rotation Speed | 0–120 rpm (electronic stepless control) |
| Condenser Type | Vertical double-layer glass condenser |
| Feed Tube | Valve-type adjustable addition tube |
| Lift Mechanism | Lever-type vertical lift, max travel 150 mm |
| Water Bath Pan | 26 × 15 cm stainless steel with PTFE-coated interior |
| Power Rating | 1.0 kW |
| Supply Voltage | 220 V AC / 50 Hz |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SY-2000 |
| Rotating Flask Capacity | 2 L |
| Bath Capacity | 4 L |
| Compatible Flask Sizes | 50–2000 mL |
| Lift Stroke | 0–150 mm |
| Rotation Speed Range | 10–200 rpm |
| Temperature Range | Ambient to 180 °C (Water Bath Accuracy: ±1 °C |
| Oil Bath Accuracy | ±2 °C) |
| Heating Power | 1500 W |
| Total Power Consumption | 1.3 kW |
| Voltage/Frequency | 220 V / 50 Hz |
| Dimensions (W×D×H) | 450 × 400 × 850 mm |
| Vacuum Range (Built-in Controller) | −0.01 to −0.095 MPa |
| Vacuum Control Accuracy | ±0.2–0.5% FS |
| Condenser | Dual-reflux, standard-taper borosilicate glass (ball joint), water-cooled |
| Sealing Material | High-elasticity PTFE |
| Drive System | Frequency-controlled synchronous motor with encoder-based speed setting |
| Control Interface | Full-color LCD touchscreen with menu-driven PID control, programmable timer for rotation, temperature, and vacuum |
| Integrated Vacuum Management | Solenoid valve-controlled vacuum regulation, pump start/stop synchronization, valve-type continuous feed under vacuum |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SY-5000 |
| Heating Bath Temperature Range | Ambient to 180 °C |
| Bath Capacity | 8 L |
| Evaporation Flask Compatibility | 2–5 L |
| Rotational Speed Range | 0–200 rpm |
| Heating Bath Material | PTFE-Composite Coated Aluminum |
| Lift Mechanism | Motorized Rocker-Type Vertical Adjustment (0–150 mm Travel) |
| Temperature Control Accuracy | ±1 °C (water), ±2 °C (oil) |
| Vacuum Range | –0.01 to –0.095 MPa |
| Vacuum Stability | ±0.2–0.5% of full scale |
| Evaporation Rate (H₂O) | ≥1.2 L/h |
| Power Supply | 220 V AC, 50 Hz |
| Overall Dimensions (W×D×H) | 500 × 700 × 800 mm |
| Brand | Yenista |
|---|---|
| Origin | France |
| Model | XTM(A)-50 |
| Type | Bandwidth-Tunable Tunable Optical Filter |
| Category | Imported Instrument |
| Distribution Status | Authorized Distributor |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Models | BPNZ-100CS, BPNZ-100CD, BPNZ-300CS, BPNZ-300CD |
| Pricing | Upon Request |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | ASK200 |
| Price Range | USD 140 – 70,000 |
| Brand | Yuelian/PW |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PW-C01 |
| Application | Laboratory-scale precision coating |
| Coating Method | Dual-mode — Doctor Blade & Wire Rod (independently operable) |
| X-axis Coating Travel | 300 × 450 mm |
| Temperature Range | Ambient to 160 °C (PID-controlled constant-temperature heating) |
| Wet Film Thickness Range | 5 µm – 5 mm |
| Overall Dimensions (L×W×H) | 660 × 470 × 390 mm |
| Coating Speed | 1–5 m/min (digital setpoint control) |
| Leveling Mechanism | Integrated aluminum alloy leveling bar |
| Substrate Platform | Removable anodized aluminum + tempered glass surface |
| Coating Uniformity | ±4% (dependent on substrate flatness and surface energy) |
| Wire Rod Specifications | Ø10 × 400 mm (standard), supplied with dual adjustable counterweights |
| Blade Material | High-hardness stainless steel alloy |
| Power Supply | 110–220 V AC, 50/60 Hz |
| Power Consumption | 48 W (standby), 2000 W (heating mode active) |
| Net Weight | 42 kg |
| Brand | Yuelian / PW |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PW-C02 |
| Application | Laboratory-scale coating development and process simulation |
| Coating Method | Dual-mode — Doctor Blade & Wire Rod (independently operable) |
| Temperature Range | Ambient to 160 °C (PID-controlled constant-temperature heating) |
| Wet Film Thickness Range | 5 µm to 5 mm |
| Overall Dimensions (L×W×H) | 800 × 380 × 410 mm |
| Coating Speed | 1–5 m/min (digital display & adjustable) |
| Substrate Width Capacity | 300 mm |
| Maximum Coating Length | 10–450 mm (programmable) |
| Leveling System | Integrated mechanical leveling bar (pre-coating substrate flattening) |
| Vacuum Platform | Uniformly distributed vacuum suction (aluminum alloy + removable tempered glass surface) |
| Coating Uniformity | ±4% (dependent on substrate flatness and fluid rheology) |
| Wire Rod Specifications | Ø10 × 400 mm (standard), supplied with two adjustable counterweights |
| Blade Material | High-strength corrosion-resistant stainless steel (austenitic grade) |
| Power Supply | 110–220 V AC, 50/60 Hz |
| Power Consumption | 48 W (standby), 2000 W (max heating load) |
| Net Weight | 44 kg |
| Brand | Yuelian / PW |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PW-RT300 |
| Application | Laboratory-scale continuous hot-melt adhesive coating and laminating |
| Coating Method | Heated comma doctor blade |
| X-axis (Coating Travel) | 300 mm (effective) |
| Coating Thickness Range | 0.1–5 mm (uniformity ±4%) |
| Coating Speed | 0.5–5 m/min (adjustable per adhesive drying kinetics) |
| Blade Actuation | Pneumatic auto-lift |
| Thickness Adjustment | Manual micrometer fine-tuning |
| Temperature Control | Thermocouple-sensed PID touchscreen controller (max. 200 °C) |
| Web Tension Control | Adjustable unwind tension (1–25 N) |
| Unwind Roll Capacity | Ø200 mm, max. 100 kg |
| Rewind Roll Diameter | Ø200 mm |
| Frame Construction | Electroplated steel frame + anodized aluminum structural modules + 304 stainless steel outer panels |
| Heating System | Calrod electric heating elements |
| Laminating Module | Integrated automatic lamination station |
| Core Type | 3-inch pneumatic expanding shaft (tapered mandrel) |
| Drive System | Inverter-controlled AC motor |
| Power Supply | 220 V AC, 50/60 Hz |
| Total Rated Power | 5 kW (nominal) |
| Compressed Air Requirement | 0.55–0.7 MPa |
| Brand | Yuelian (PW) |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PW-RT380 |
| Coating Width | 380 mm (effective) |
| Coating Methods | Wire-Bar & Doctor Blade |
| Adhesive Delivery | Manual |
| Coating Thickness Range | 0.01–1 mm (±3 µm accuracy) |
| Thickness Adjustment | Micrometer Dial |
| Rewinding Motor | Variable-Frequency Drive (VFD) |
| Tension Control | Adjustable |
| Line Speed | 0.5–3 m/min |
| Oven Length | 0.5–6 m (configurable) |
| Power Supply | 220 V AC |
| Total Power Consumption | 6 kW |
| Application Scope | R&D and QC coating trials for thin-film functional materials |
| Brand | Yuelian / PW |
|---|---|
| Origin | Guangdong, China |
| Model | PW-SY300 |
| Coating Methods | Adjustable Doctor Blade & Removable Wire Rod (Independent Operation) |
| Coating Speed | 1–5 m/min (digital setting) |
| Coating Length | 10–300 mm (digital setting) |
| Temperature Range | Ambient to 160 °C (PID-controlled, ±1 °C stability) |
| Substrate Flatness Preconditioning | Integrated Mechanical Leveling Bar |
| Coating Uniformity | ±4% (dependent on substrate flatness and surface energy) |
| Maximum Coating Area | 200 × 300 mm |
| Wet Film Thickness Range | 5 µm – 5 mm |
| Heating Power | 2000 W (main stage) |
| Standby Power | 48 W |
| Power Supply | 110–220 V AC, 50 Hz |
| Construction | Anodized Aluminum Frame & Stage |
| Blade Material | Alloy Stainless Steel (AISI 420 equivalent) |
| Wire Rod Specifications | Ø10 × 300 mm (standard), supplied with dual adjustable counterweights |
| Weight | 28 kg (net) |
| Dimensions (L×W×H) | 550 × 350 × 350 mm |
| Compliance | CE-marked electrical architecture |