Other Measurement Instruments
Filter
Showing 151–180 of 310 results
| Brand | Alphasense (UK) |
|---|---|
| Origin | United Kingdom |
| Model | SOH-A2 |
| Detection Principle | Potentiostatic 3-Electrode Electrochemistry |
| Gas Targets | Sulfur Dioxide (SO₂) and Hydrogen Sulfide (H₂S) |
| SO₂ Channel | Range 0–20 ppm, Resolution <0.2 ppm, t₉₀ <15 s, Sensitivity 140–250 nA/ppm (at 10 ppm), Zero Current <+0.2 ppm, Linearity Error ±2 ppm (0–10 ppm), Overload Capacity 50 ppm |
| H₂S Channel | Range 0–200 ppm, Resolution <0.1 ppm, t₉₀ <25 s, Sensitivity 450–900 nA/ppm (at 20 ppm), Zero Current ±0.25 ppm, Linearity Error ±5 ppm (0–20 ppm), Overload Capacity 200 ppm |
| Filtered Cross-Sensitivity Suppression | Integrated high-capacity SO₂-specific filter eliminates interference from H₂S, NOₓ, and acidic gases |
| Operating Temperature | –20 °C to +50 °C |
| Operating Humidity | 15–90 % RH (non-condensing) |
| Expected Lifetime | ≥24 months (typical field use) |
| Compliance | CE marked, RoHS compliant, meets IEC 60079-29-1 (Explosive Atmospheres – Gas Detectors) |
| Brand | Alphasense (UK) |
|---|---|
| Origin | United Kingdom |
| Model Series | THCO / THSO₂ / THH₂S / THNO₂ |
| Supply Voltage | 7.5–35 VDC |
| Output Signal | 4–20 mA analog |
| Sensor Compatibility | Alphasense B-Series and A-Series electrochemical toxic gas sensors |
| Compliance | CE-marked, RoHS-compliant, designed for integration into industrial fixed-gas detection systems |
| Brand | Alphasense |
|---|---|
| Origin | United Kingdom |
| Model | THO2 4–20 mA Analog Transmitter Module |
| Sensor Compatibility | Alphasense A-Series O₂ Electrochemical Sensors |
| Supply Voltage | 7.5–35 VDC |
| Output Signal | 4–20 mA (2-wire loop-powered) |
| Compliance | CE-marked, RoHS-compliant |
| Enclosure Rating | IP65 (housing dependent on OEM integration) |
| Operating Temperature | −20 °C to +50 °C |
| Storage Temperature | −40 °C to +70 °C |
| Long-Term Stability | <2% FS/year (typical, with calibrated sensor) |
| Brand | Alphasense (UK) |
|---|---|
| Origin | United Kingdom |
| Model | VOC-A4 |
| Detection Principle | Amperometric 4-Electrode Electrochemical |
| Target Gases | Volatile Organic Compounds (e.g., ethanol, isopropanol, toluene) and Carbon Monoxide (CO) |
| Operating Bias Options | 0 V, 0.1 V, 0.2 V, or 0.3 V |
| Response Time (t₉₀) | <30 s |
| Dimensions | Ø20.2 × 16.5 mm |
| CO Range | 0–190 ppm (max overload: 1000 ppm) |
| CO Sensitivity | 230–410 nA/ppm |
| Ethanol (C₂H₆O) Range | 0–2 ppm (max overload: 5 ppm) |
| Ethanol Sensitivity | 200–400 nA/ppm |
| Brand | Alphasense (UK) |
|---|---|
| Origin | United Kingdom |
| Model | VOC-B4 |
| Detection Principle | Amperometric 4-Electrode Electrochemistry |
| Target Gases | Volatile Organic Compounds (e.g., ethanol), Carbon Monoxide (CO) |
| Response Time (t₉₀) | <30 s |
| Dimensions | Ø32.3 × 16.5 mm |
| CO Range | 0–100 ppm (overload: 1000 ppm) |
| Ethanol Range | 0–2 ppm (overload: 5 ppm) |
| CO Sensitivity | 400–700 nA/ppm |
| Ethanol Sensitivity | 400–650 nA/ppm |
| Bias Voltage Options | 0 V, 0.1 V, 0.2 V, or 0.3 V |
| Operating Temperature | –20 °C to +50 °C |
| Humidity Range | 15–90 % RH (non-condensing) |
| Brand | -- |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | 4239 |
| Pricing | Upon Request |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | MS2840A-041 |
| Frequency Range | 9 kHz to 6 GHz |
| Phase Noise (1 GHz, 1 kHz offset) | –117 dBc/Hz (nom.) |
| DANL (1 GHz, Preamp OFF) | –153 dBm/Hz |
| RBW | 1 Hz to 31.25 MHz |
| Analysis Bandwidth | Up to 125 MHz (with options) |
| Input Impedance | 50 Ω (N-type female) |
| Operating Temperature | 0°C to +50°C |
| Weight | ≤14.5 kg |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | Rubidium™ MG362x1A |
| Frequency Range | 9 kHz – 70 GHz (extendable to 72 GHz) |
| Phase Noise Options | Standard / Low-Noise (Option 3) / Ultra-Low-Noise (Option 13) |
| Output Power | Up to +30 dBm (standard), +16 dBm @ 43.5 GHz, +6 dBm @ 70 GHz |
| Modulation Types | AM, FM, PM, Pulse, Arbitrary Waveform |
| Rack Height | 3U |
| Interface Standards | GPIB (IEEE-488), LAN (10/100/1000BASE-T), USB 2.0 (Type A/B), SDIO, Auxiliary I/O (25-pin & 15-pin), Rear-panel RF Output (K(m)-type, Option 9) |
| Brand | Anyty |
|---|---|
| Model | 3R-AID-S |
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Pricing | Available upon Request |
| Brand | APE |
|---|---|
| Origin | Germany |
| Type | Scanning Autocorrelator for Ultrashort Pulse Characterization |
| Wavelength Range | 200–2000 nm |
| Pulse Duration Range | 5 fs – 500 ps |
| Dynamic Range | >10⁷ (7 orders of magnitude) |
| Scan Range | Up to ±1.5 ps (adjustable via motorized delay stage) |
| Resolution | Sub-femtosecond timing resolution (dependent on optical path stability and laser repetition rate) |
| Interface | USB 2.0 with proprietary control software |
| Compliance | CE-marked, RoHS-compliant |
| Brand | API |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AutoCollimator-Laser |
| Pricing | Upon Request |
| Resolution | 0.1 arcsecond |
| Angular Range | ±400 arcseconds |
| Maximum Measurement Distance | 15 m (49.2 ft) |
| Accuracy | ±1 arcsecond (optional ±0.2 arcsecond) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Ballbar |
| Price Range | USD 7,000 – 14,000 |
| Brand | API |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | LJG-B |
| Pricing | Available Upon Request |
| Brand | API |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Propeller Pitch Measuring Machine Model A |
| Pricing | Available Upon Request |
| Brand | API |
|---|---|
| Origin | USA |
| Distributor Type | Authorized Distributor |
| Origin Category | Imported |
| Pricing | Available Upon Request |
| Measurement Range | Up to 60 m (diameter) |
| Pitch/Yaw/Roll Range | ±35° |
| Probe Stem Lengths | 50 mm, 100 mm, 200 mm (standard) |
| Absolute Accuracy | ±0.05 mm (2σ, ≤10 m with 100 mm stem) |
| Absolute Accuracy | ±0.05 mm + 10 ppm (2σ, >10 m with 100 mm stem) |
| Target Accessibility | Hidden features, deep cavities, reverse-engineering surfaces |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Spindlecheck |
| Price Range | USD $14,000 – $72,000 |
| Brand | Apogee |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Cloudburst SG-400 Series |
| Output Interface | SDI-12 v1.4 (Modbus option planned) |
| Capture Area | 324 cm² (SG-400/SG-410) or 200 cm² (SG-420/SG-430) |
| Inlet Diameter | 8 in (20.3 cm) or 6.3 in (16 cm) |
| Precipitation Capacity | 900 mm (SG-400/SG-410) or 1500 mm (SG-420/SG-430) |
| Bucket Volume | 30 L |
| Heating Option | Optional (SG-410 & SG-430) |
| Accuracy (Cumulative) | ±0.1 mm (<5 mm), ±1% (>5 mm) |
| Accuracy (Rate) | ±5% (>2 mm/hr) |
| Resolution | 0.01 mm |
| Temperature Sensitivity | ±0.01 mm/°C |
| Long-Term Drift | <0.5%/year |
| Nonlinearity | <0.1 mm (SG-400/SG-420), <0.2 mm (SG-410/SG-430) |
| Sensor Type | Stainless Steel Strain-Gauge Load Cell |
| Power Supply | 5.5–26 VDC |
| Current Draw | 20 mA (non-heated), +2.1 A @24 VDC (heated) |
| Power Consumption | 240 mW (base), up to 50 W (heater active) |
| Operating Temperature | –20 to +60 °C |
| Humidity Range | 0–100% RH |
| Enclosure Rating | IP67 |
| Dimensions | Ø38 cm × H80 cm |
| Weight | 12 kg |
| Mounting | Compatible with 15.24 cm wooden posts or 10.16 cm metal pipes |
| Cable Length | 5 m standard |
| Brand | Apogee |
|---|---|
| Origin | USA |
| Model | SL-510-SS (Upward), SL-610-SS (Downward) |
| Sensitivity | 0.12 mV per W/m² |
| Calibration Factor | 8.5 W/m² per mV |
| Measurement Range | −200 to +200 W/m² (net longwave) |
| Uncertainty | ±5% (k=2) |
| Spectral Range | 5–30 µm |
| Field of View | 150° (hemispherical) |
| Response Time | <0.5 s |
| Zero Offset Drift | <5 W/m² |
| Tilt Error | <0.5% |
| Nonlinearity | <1% |
| Long-Term Drift | <2% per year |
| Repeatability | <1% |
| Temperature Response | <5% (−15 to +45 °C) |
| Thermistor | 30 kΩ @ 25 °C, ±1 °C accuracy |
| Thermistor Output | 0–2500 mV (with 2500 mV excitation) |
| Heater Power | 185 mW @ 12 V DC (780 Ω, 15.4 mA) |
| Housing | Anodized aluminum, IP67 (SL-510-SS) / IP68 (SL-610-SS) |
| Cable Connector | Marine-grade stainless steel, 30 cm pigtail |
| Dimensions | Ø23.5 mm × 27.5 mm height |
| Mass | 90 g (SL-510-SS), 100 g (SL-610-SS) |
| Warranty | 4 years |
| Brand | Apogee |
|---|---|
| Origin | USA |
| Model | SN-500 |
| Measurement Range (Shortwave Up) | 0–2000 W/m² |
| Measurement Range (Shortwave Down) | 0–2000 W/m² |
| Measurement Range (Longwave Up) | −200 to +200 W/m² |
| Measurement Range (Longwave Down) | −200 to +200 W/m² |
| Spectral Range (Shortwave Up) | 385–2105 nm |
| Spectral Range (Shortwave Down) | 295–2685 nm |
| Spectral Range (Longwave) | 5000–30,000 nm |
| Sensitivity | 55 µV/(W/m²) (SW↑), 150 µV/(W/m²) (SW↓), 100 µV/(W/m²) (LW↑/LW↓) |
| Response Time | 1 s (detector) |
| Zero Offset (5 K/h) | 18.2 W/m² (SW↑), 6.67 W/m² (SW↓), 10 W/m² (LW) |
| Field of View | 180° (SW↑), 150° (SW↓), 180° (LW↑/LW↓) |
| Output | Four SDI-12 digital channels (SW↑, SW↓, LW↑, LW↓) |
| Supply Voltage | 5–16 V DC (heater rated at 12 V DC) |
| Power Consumption | 62 mA / 740 mW @ 12 V DC |
| Operating Temperature | −50 °C to +80 °C |
| Relative Humidity | 0–100 % RH |
| Dimensions | 116 mm (L) × 45 mm (W) × 66 mm (H) |
| Weight | 320 g (including mounting rod and 5-m cable) |
| Cable | 5-m, 4-conductor shielded twisted pair with ethylene propylene rubber jacket |
| Brand | Apogee |
|---|---|
| Origin | USA |
| Model Numbers | SP510 |
| Measurement Range | 0–2000 W/m² (shortwave net radiation) |
| Spectral Range | 385–2105 nm (SP510), 295–2685 nm (SP610), 360–1120 nm (silicon photodiode models) |
| Output Options | 0–114 mV, 0–300 mV, 0–400 mV, 0–2.5 V, 4–20 mA, 0–5 V, USB, SDI-12 |
| Uncertainty | ±5% |
| Cosine Response Error | <30 W/m² at 80° zenith angle (SP510) |
| Response Time | ≤0.5 s (thermopile), <1 ms (silicon) |
| Operating Temperature | −50 to +80 °C (thermopile), −40 to +70 °C (silicon, submersible to 30 m) |
| Long-Term Drift | <2% per year |
| IP Rating | IP68 (silicon models), IP67 (thermopile models) |
| Brand | Apogee |
|---|---|
| Origin | USA |
| Model | SU-100 |
| Spectral Range | 250–400 nm |
| Absolute Accuracy | ±10% |
| Uniformity | ±5% |
| Repeatability | ±1% |
| Output Sensitivity | 0.2 mV per μmol·m⁻²·s⁻¹ |
| Full-Sun Output | ~35 mV (≈175 μmol·m⁻²·s⁻¹, ≈60 W·m⁻²) |
| Calibration Factor | 5.0 μmol·m⁻²·s⁻¹ per mV |
| Output Range | 0–60 mV (0–300 μmol·m⁻²·s⁻¹, 0–102 W·m⁻²) |
| Response Time | <1 ms |
| Long-Term Drift | <3% per year |
| Operating Environment | −25 to +55 °C, 0–100% RH |
| IP Rating | IP68 (submersible) |
| Weight | 75 g |
| Standard Cable Length | 5 m (extendable) |
| Power Supply | Self-powered (no external power required) |
| Brand | AQ M-Tech |
|---|---|
| Origin | Sweden |
| Model | APS6-25 |
| Housing Material | Polypropylene |
| Inner Diameter | 6 mm |
| Outer Diameter | 49 mm |
| Tri-Clamp Connection | 25 mm |
| Cable Length | Standard (no extension specified) |
| Brand | AQ M-Tech |
|---|---|
| Origin | Sweden |
| Housing Material | 316L Stainless Steel |
| Tube ID | 15.75 mm |
| Tube OD | 51 mm |
| Tri-Clamp Size | 25 mm |
| Output Interface | Analog/RS485 (via external ultrasonic controller) |
| Operating Principle | Transmission-mode ultrasonic detection of gas voids and particulates in flowing liquid streams |
| Brand | AQ M-Tech |
|---|---|
| Origin | Sweden |
| Model | CCS15.75-25 |
| Material (Wetted Parts) | 316L Stainless Steel (EN 1.4404) |
| Connection | Tri-Clamp 25 mm |
| Operating Temperature | 0–100 °C (continuous), –20 to 130 °C (SIP, 500 h cumulative) |
| Pressure Rating | 1 MPa (10 bar g) at rated temperature |
| IP Rating | IP67 |
| Surface Roughness (Ra) | <0.375 µm (<15 µin) |
| Detectable Bubble Size | ≥2 mm |
| Compliance | EN 10204 3.1B Certificate Available |
| Cable Length | Standard 7 m (optional 20 m / 40 m) |
| Brand | AQ M-Tech |
|---|---|
| Origin | Sweden |
| Model | CCS9.4-25 |
| Housing Material | 316L Stainless Steel |
| Inner Diameter | 9.4 mm |
| Outer Diameter | 51 mm |
| Tri-Clamp Connection | 25 mm |
| Cable Length | 7 m |
| Operating Principle | Ultrasonic Transit-Time Differential Detection |
| Brand | AQ M-Tech |
|---|---|
| Origin | Sweden |
| Model | FCP4-25 |
| Housing Material | Polypropylene (PP) |
| Inner Diameter | Ø4 mm |
| Outer Diameter | Ø40 mm |
| Clamp Connection | 25 mm |
| Standard Cable Length | 5 m |
| Compliance | Designed for hygienic applications in regulated industries |
| Brand | AQ M-Tech |
|---|---|
| Origin | Sweden |
| Model | FCS10-25 |
| Inner Diameter | 10.0 mm |
| Outer Diameter | 51 mm |
| Tri-Clamp Connection | 25 mm |
| Standard Cable Length | 5 m |
| Optional Cable Length | 25 m |
| Housing Material | ASTM A276 Type 316L Stainless Steel |
| Compliance | FDA-compliant wetted surfaces, EHEDG-certified hygienic design |
| Brand | AQ M-Tech |
|---|---|
| Origin | Sweden |
| Model | LS85 |
| Operating Temperature (Continuous) | −15 °C to 60 °C (Ex model: max 60 °C) |
| Operating Temperature (Short-term) | up to 130 °C (Ex model: max 60 °C) |
| Vessel Diameter Range | 79–91 mm |
| Standard Cable Length | 7 m |
| Optional Cable Length | 20 m |
| ATEX Certification | II 2G Ex ia IIB T4 Gb (SP13ATEX3645X) |
| Brand | AQ M-Tech |
|---|---|
| Origin | Sweden |
| Model | PAC4-25 |
| Inner Diameter | 4 mm |
| Outer Diameter | 50 mm |
| Tri-Clamp Connection | 25 mm |
| Standard Cable Length | 7 m (optional: 20 m or 40 m) |
| Housing Material | Polypropylene (PP) |
| Compliance | CE, RoHS, FDA-compliant for food-contact applications |