Other Measurement Instruments
Filter
Showing 181–210 of 310 results
| Brand | AQ M-Tech |
|---|---|
| Origin | Sweden |
| Model | RS27/KS27 |
| Operating Temperature (Continuous) | -20°C to 170°C (Ex model: ≤60°C) |
| Operating Temperature (Short-term) | up to 200°C (Ex model: ≤60°C) |
| Mounting Vessel Diameter | 26–28 mm |
| Housing Material | PEI (Polyetherimide) |
| Standard Cable Length | 7 m (optional: 20 m) |
| ATEX Certification | II 2G Ex ia IIB T4 Gb (SP13ATEX3645X) |
| Brand | AQ M-Tech |
|---|---|
| Origin | Sweden |
| Model | SAC4.5-25 |
| Tubing ID | Ø4.5 mm |
| Tubing OD | Ø38 mm |
| Clamp Connection | 25 mm (DIN 11851 / ISO 2852) |
| Standard Cable Length | 7 m |
| Housing Material | ASTM A276 Type 316L Stainless Steel |
| Compliance | Designed for GMP-compliant biopharmaceutical fluid paths |
| Brand | Aquaread |
|---|---|
| Country of Origin | United Kingdom |
| Model | LeveLine-EWS |
| Sensor Output | SDI-12 or Modbus RTU |
| Pressure Compensation | Integrated Barometric Sensor |
| Enclosure Dimensions | 90 × 90 × 160 mm |
| Water Level Accuracy | ±0.1% FS |
| Sensor Material | Stainless Steel Body with Polyoxymethylene (POM) Nose Cone |
| Warranty | 2 Years on LeveLine-Mini Sensor |
| Data Transmission | SMS and Email Alerts |
| Local Data Logging | Yes |
| Remote Configuration | SMS-based Command Interface |
| Third-Party Sensor Support | Up to 5 SDI-12 Devices |
| Brand | Argolight |
|---|---|
| Origin | France |
| Manufacturer | Argolight SAS |
| Model | Argo-HM Slide V2 |
| Substrate | AG03 ultra-pure fused silica core |
| Dimensions | 75 × 25 × 1.5 mm |
| Pattern Count | 16 embedded 3D fluorescent structures per slide |
| Excitation Range | 250–650 nm (continuous) |
| Emission Range | λₑₓ + 15 nm to 800 nm (continuous) |
| Photostability | Non-bleaching, lifetime-stable fluorescence |
| Damage Threshold | 50 GW/cm² (peak or average irradiance) |
| Immersion Compatibility | Dry, oil, water (no restrictions) |
| Objective Compatibility | All objectives ≤ 100× |
| Storage Conditions | 10–40 °C, 20–70 % RH |
| Imaging Modality Compatibility | Widefield, confocal, spinning disk, light-sheet, TIRF — excluding STED, RESOLFT, and multiphoton modalities |
| Traceability | Certified reference standard aligned with ISO/IEC 17025-accredited metrology labs (e.g., BAM) and ISO 21073:2019 |
| Brand | Argolight |
|---|---|
| Origin | France |
| Model | Argo-LM Slide V2 |
| Substrate | AG03 borosilicate glass core in anodized aluminum carrier |
| Dimensions | 75 × 25 × 1.5 mm |
| Excitation Range | 250–650 nm (continuous) |
| Emission Range | λₑₓ + 15 nm to 800 nm (continuous) |
| Immersion Compatibility | Dry, oil (unrestricted), water |
| Objective Compatibility | ≤20× magnification |
| Photostability | Non-bleaching, lifetime-stable fluorescence patterns |
| Laser Damage Threshold | 50 GW/cm² (peak or average irradiance) |
| Pattern Precision | <10 µm in all three dimensions |
| Compliance | Aligns with ISO 21073:2019 (“Fluorescence confocal microscopes for biological imaging — Optical data”) and supports GLP/GMP-aligned quality documentation workflows |
| Brand | ARGOLIGHT (distributed by Auniontech) |
|---|---|
| Origin | Shanghai, China |
| Product Type | Fluorescence Microscope Calibration Slide & Integrated Power Sensor |
| Dimensions | 75 × 25 × 6 mm |
| Excitation Wavelength Range | 250–650 nm (CW) |
| Emission Wavelength Range | λₑₓ + 15 nm to 800 nm (broadband) |
| Power Measurement Range | 10 µW – 100 mW |
| Measurable Wavelength Range | 350–1100 nm |
| Immersion Compatibility | Dry, oil, and water immersion objectives |
| Recommended Imaging Duration per Session | < 20 min |
| Storage Conditions | 10–40 °C, 20–70 % RH |
| Damage Threshold | 50 GW/cm² (peak or average irradiance) |
| Pattern Stability | Photostable, non-bleaching embedded 2D/3D fluorescent nanostructures |
| Brand | ARGOLIGHT (distributed by Auniontech) |
|---|---|
| Origin | Shanghai, China |
| Product Type | Calibration Slide & Resolution Target |
| Dimensions | 75 × 25 × 6 mm |
| Excitation Wavelength Range | 250–650 nm (CW) |
| Emission Wavelength Range | λₑₓ + 15 nm to 800 nm (broadband) |
| Immersion Compatibility | Dry, Oil, and Water Objectives |
| Recommended Imaging Duration per Session | <20 min |
| Storage Conditions | 10–40 °C, 20–70% RH |
| Damage Threshold | 50 GW/cm² (peak or average irradiance) |
| Optical Power Measurement Range | 10 µW – 100 mW |
| Spectral Coverage for Power Detection | 350–1100 nm |
| Brand | Argolight |
|---|---|
| Model | Argo-SIM Slide V2 |
| Substrate | AG03 Glass Core in Anodized Aluminum Housing |
| Dimensions | 75 × 25 × 1.5 mm |
| Fluorescence Stability | Lifetime (Non-photobleaching) |
| Excitation Range | 250–650 nm (Continuous) |
| Emission Range | λₑₓ + 15 nm to 800 nm (Continuous) |
| Immersion Compatibility | Dry, Oil (Unrestricted), Water |
| Objective Exposure Limit | <20 min per objective |
| Storage Conditions | 10–40 °C, 20–70 % RH |
| Laser Damage Threshold | 50 GW/cm² (Peak or Average Irradiance) |
| Pattern Count per Slide | 27 Distinct Fluorescent Microstructures |
| Imaging Compatibility | All Fluorescence-Based Modalities Except STED and Multiphoton |
| Software | Argolight Daybook (Proprietary Image Analysis & QC Database Platform) |
| Brand | Auniontech (Distributor) |
|---|---|
| Origin | Shanghai, China |
| Model | Argo-WP Calibration Microplate |
| Application | QC/QA of fluorescence imaging systems (HCS/HTS/HCI) |
| Excitation Range | 350–650 nm |
| Emission Range | ~365–800 nm |
| Substrate | Patented photostable glass with embedded 3D fluorescent patterns |
| Format | 4-well aluminum plate, each well containing one 75 mm × 25 mm × 1.5 mm Argolight glass slide |
| Pattern Stability | Non-bleaching, reusable, traceable to NMIs (e.g., BAM) |
| Compliance Support | IQ/OQ/PQ protocols, ASTM E3085, ISO 17025-aligned validation workflows |
| Software | Argolight Daybook v3.x (FDA 21 CFR Part 11-ready audit trail, open-format export, documented algorithms) |
| Brand | Artray |
|---|---|
| Origin | Japan |
| Model | ARTCAM-990SWIR-TEC |
| Spectral Range | 400–1700 nm |
| Sensor Type | InGaAs (Indium Gallium Arsenide) |
| Cooling | Thermoelectrically Cooled (TEC) |
| Category | SWIR Imaging Camera |
| Brand | AS ONE |
|---|---|
| Origin | Japan |
| Manufacturer | AS ONE Corporation |
| Model No. | 1-6393-01 |
| Measurement Range | 6.0 to 99,999.9 rpm |
| Resolution | 0.1 rpm |
| Accuracy | ±(0.01% of reading + 1 digit) |
| Sampling Interval | 1.0 to 10.0 seconds |
| Measurement Distance | 50–300 mm (with reflective tape) |
| Auto-ranging | Yes |
| Operating Temperature | 5–40 °C |
| Display | 6-digit LCD |
| Dimensions (W×H×D) | 58 × 28 × 122 mm |
| Weight | Approx. 140 g |
| Power Supply | Four AA batteries (included) |
| Accessories | Ten reflective tapes |
| Brand | AS ONE |
|---|---|
| Model | C6-4024-11 |
| Material | ABS Resin |
| Alarm Volume | ≥70 dB |
| Weight | ≈75 g |
| Power Supply | 1 × AAA battery (DC 1.5 V, included) |
| Dimensions | 82 × 23.2 × 76 mm |
| Max Timer Setting | 99 min 59 sec |
| Min Timer Setting | 1 sec |
| Repeat Function | Yes |
| Origin | China |
| Manufacturer | AS ONE Co., Ltd. |
| Brand | Asicotech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Model | D2600 |
| Flow Control Accuracy | ±1% of reading (standard gas) |
| Standard Gas Flow Range | 0–10 sccm |
| Auxiliary Gas Flow Range | 0–4 SLPM |
| Dilution Gas Flow Range | 0–2000 sccm |
| Dilution Ratio Range | 1:10 to 1:2500 |
| Control Stability | <±0.1% FS |
| Repeatability | <0.2% |
| Operating Temperature | 0–45°C |
| Storage Temperature | −20–75°C |
| Dimensions | 150 × 120 × 170 mm |
| Weight | 1.5 kg |
| Power Supply | 24 VDC, 15 W |
| Battery | Integrated Li-ion |
| Communication | Ethernet ×1, RS232/RS485 |
| Display | 4.3″ touchscreen |
| Gas Interface | 1/8″ Swagelok |
| Wetted Materials | 316 stainless steel, FEP, FKM, Viton |
| Relative Humidity | 5–95% RH (non-condensing) |
| Brand | ATP Optosky |
|---|---|
| Origin | Fujian, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ATM5100 |
| Price | Upon Request |
| Sampling Rate | 2 MHz |
| Spectral Range | 800–1650 nm |
| Photosensitive Area | Ø3 mm (customizable) |
| Max. Measurable Power | +3 dBm |
| Min. Measurable Power | −70 dBm |
| Nonlinearity | <0.5% |
| Measurement Uncertainty | ±2% |
| Calibration | Built-in traceable calibration |
| Output Interface | USB 2.0 High-Speed |
| Optical Input | FC/PC connector and free-space coupling |
| Optional Accessory | OD3 calibrated neutral-density attenuator |
| Brand | Auniontech |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | AUM-LSV1310 |
| Optical Wavelength | 1310 nm |
| Laser Safety Class | Class I (IEC 60825-1) |
| Output Power | <5 mW |
| Frequency Range | DC to 2.5 MHz |
| Displacement Noise Density | 5 pm/√Hz |
| Displacement Resolution | 1.28 nm |
| Maximum Velocity Range | 4.5 m/s |
| Velocity Resolution | <1 µm/s (at 1 kHz) |
| Displacement Repeatability (>10 Hz) | ±1 nm |
| Displacement Repeatability (<10 Hz) | ±10 nm |
| Vibration Frequency Accuracy | ±0.02% |
| Dynamic Velocity Range | 20 m/s (peak) |
| Sampling Rate | 5 MS/s (real-time digital acquisition) |
| Signal Output | Ethernet (TCP/IP, UDP), Digital TTL sync |
| Power Supply | 12–24 V DC |
| Power Consumption | <4 W |
| Operating Temperature | 0–50 °C |
| Relative Humidity | 35–85% RH (non-condensing) |
| Housing Material | Anodized Aluminum Alloy |
| Dimensions | 83.7 × 50 × 22 mm |
| Weight | 180 g |
| Brand | Auniontech |
|---|---|
| Model | Aut-S500 |
| Operating Temperature Range | -40 to 1000 °C |
| Accuracy | ±0.1 °C (when used with compatible interrogator) |
| Resolution | 0.02 °C |
| Wavelength Range | 1528–1568 nm (±0.1 nm center wavelength tolerance) |
| Thermal Sensitivity | 30–50 pm/°C |
| FWHM | <0.3 nm |
| Side Mode Suppression Ratio (SMSR) | >12 dB |
| Peak Reflectivity | >70% |
| Dimensions | 35 mm × 10 mm × 5.5 mm |
| Connector Type | FC/APC |
| Packaging | Ceramic Hermetic Encapsulation |
| Brand | Avisoft |
|---|---|
| Origin | Germany |
| Model | 116h / 416h / 816h / 1216h |
| Sampling Frequency Range | 20 Hz – 460 kHz (116h) |
| ADC Resolution | 16-bit |
| Input Sensitivity Range | −43.2 dBV to −3.2 dBV |
| Gain | 40 dB |
| Self-Noise | 18 dB SPL |
| Microphone Sensitivity | 500 mV/Pa |
| Connector | XLR-5 male |
| Dimensions (Microphone) | 36 × 36 × 60 mm |
| Weight (Microphone) | 65 g |
| Weight (116h Host) | 205 g |
| Power | USB-powered (UltrasoundGate host), optional USB power adapter for field use |
| Brand | Avisoft |
|---|---|
| Origin | Germany |
| Model | UltrasoundGate 116 |
| Sampling Rate | 20 Hz – 460 kHz |
| Weight | 205 g |
| Resolution | 16-bit |
| Input Sensitivity (max) | −43.2 dBV |
| Input Sensitivity (min) | −3.2 dBV |
| Gain | 40 dB |
| Features | Overload Indicator, Peak dB LED, Real-time Audio Monitoring & Streaming, Adjustable Gain |
| Brand | Aiyao Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | AY1000 |
| Output Interface | RS422 Digital Output |
| Operating Frequency Range | ≥0.01 Hz |
| Noise Floor | Ultra-Low (Typ. <10 ng/√Hz below 1 Hz) |
| Form Factor | Miniaturized, Low-Power, Lightweight Design |
| Compliance | Fully Domesticated Architecture |
| Brand | AZ (Beijing Aozuo Ecological Instruments Co., Ltd.) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AZ-RF |
| Price | Upon Request |
| Rainfall Intensity Range | 0.2–240 mm/h |
| Raindrop Diameter Range | 0.1–5 mm |
| Rainfall Uniformity | ≥90% (scanning-type configuration) |
| Measurement Resolution | 0.01 mm (rainfall depth), 0.01 mm/h (intensity), 1 mm/h (intensity control step) |
| Control Levels | Up to 120 programmable intensity steps |
| Operating Height | 2.5–3.2 m (adjustable) |
| Coverage Area | Configurable up to 2 × 6 m² (12 m²) |
| Power Supply | 380 V AC (fixed), 24 V DC (portable) |
| Optional Disdrometer | Laser-based, 0.16–8 mm particle sizing, 0.2–20 m/s velocity detection, 440-class particle classification |
| Brand | Microphotons |
|---|---|
| Focal Length | 35 mm (typical for AZURE-3514SWIR series) |
| Spectral Range | 900–1700 nm |
| Mount Type | C-Mount |
| Design Optimized For | InGaAs Sensor Arrays |
| Transmission Efficiency | >85% (avg. across band) |
| Working Distance | Fixed Focus (Standard Configuration) |
| Environmental Rating | Industrial Grade, Non-Sealed (Indoor Use) |
| Brand | Baineng |
|---|---|
| Origin | Shanghai, China |
| Model | BN-RL |
| Type | Non-contact Pulse Radar Water Level Sensor |
| Measurement Principle | 26 GHz Pulsed Time-of-Flight (PTOF) |
| Range Options | 0–15 m / 0–30 m / 0–45 m |
| Accuracy | ±2 mm (for 0–15 m range) |
| Beam Angle | 6° or 8° |
| Output Interfaces | RS-485 (Modbus RTU), 4–20 mA (optional), 0–5 V (optional) |
| Power Supply | 12 VDC (RS-485 mode) or 24 VDC (4–20 mA loop-powered) |
| Max. Current Consumption | 12 mA |
| Operating Temperature | −40 °C to +100 °C |
| Enclosure Rating | IP68 |
| Wave Filtering | Built-in dynamic surface wave suppression algorithm |
| Maintenance | Maintenance-free design |
| Brand | BEAMEX |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BOS-25 |
| Price | USD 9,999 |
| Brand | Biaozhuo |
|---|---|
| Origin | Shanghai, China |
| Model | JJ-2A |
| Measurement Range | 0°–360° |
| Angular Resolution | <1 arcsecond |
| Accuracy | <4 arcseconds |
| Base Material | Granite |
| Main Shaft Bearing | Dual-sphere rolling mechanism |
| Operating Temperature | 20 °C ±3 °C |
| Relative Humidity | 40–60 % RH |
| Mass | 350 kg |
| Brand | Campbell |
|---|---|
| Origin | USA |
| Model | CR300 |
| CPU | ARM Cortex-M4 @ 144 MHz |
| Internal Memory | 80 MB data storage, 5 MB program storage, 2 MB OS storage |
| Clock Accuracy | ±1 minute/month |
| USB Interface | Micro-B, USB 2.0 Full-Speed (12 Mbps) |
| Power Input | 12 V terminal or 12 V battery/UPS |
| Excitation Output | 1 × switched 12 V (500 mA @ 20°C) |
| Analog Inputs | Differential, ±34 mV range, 230 nV resolution, accuracy ±(0.04% of reading ± 6 µV) at 0°–40°C |
| Operating Temperature | –40° to +70°C |
| Dimensions | 14 × 7.6 × 5.1 cm |
| Weight | 242 g |
| Communication Protocols | PPP, ICMP/Ping, Auto-IP (APIPA), IPv6, UDP, TCP, TLS, DHCP Client, SLAAC, DNS Client, Telnet, PakBus, SDI-12, Modbus RTU/ASCII/TCP, DNP3 |
| Environmental Protection | High-level surge and ESD protection |
| Data Transmission | Encrypted email & alarm notifications via TLS |
| Configuration | USB direct-to-PC |
| Compliance | Designed for long-term unattended field deployment in hydrological, meteorological, environmental, and industrial monitoring applications |
| Brand | Campbell Scientific |
|---|---|
| Origin | USA |
| Model | CR6 |
| Operating Temperature Range | -40 to +70°C (standard), -55 to +85°C (extended) |
| Analog Input Resolution | 24-bit ADC |
| Analog Voltage Accuracy | ±(0.04% of reading + offset) at 0–40°C |
| Input Channels | Up to 12 single-ended or 6 differential analog inputs |
| Communication Interfaces | Ethernet (10/100 RJ-45), USB Micro-B (virtual Ethernet & serial), RS-485, RS-422, SDI-12, CPI, CS I/O |
| Data Storage | 4 MB SRAM + 72 MB flash + microSD slot (up to 16 GB) |
| Power Supply | 10–18 Vdc (BAT), 16–32 Vdc (CHG) |
| Real-Time Clock Accuracy | ±3 min/year (GPS optional: ±10 µs) |
| Vibration Compensation | VSECT® spectral analysis for static vibrating-wire measurements |
| Enclosure | UV-stabilized TPE over impact-resistant polycarbonate (Recycling Code 7) |
| Dimensions | 21.0 × 10.2 × 5.6 cm |
| Weight | 0.42–0.52 kg |
| Brand | Cellix |
|---|---|
| Origin | Ireland |
| Model | FS-1.5 / FS-7.0 / FS-80.0 / FS-1000 |
| Flow Ranges | ±1.5 µL/min |
| Accuracy | ±0.5% FS (FS-1.5) to ±0.2% FS (FS-1000), or ±5–10% of reading |
| Dead Volume | 1.0 µL |
| Max Operating Pressure | 200 bar |
| Dimensions | 60 × 51 × 21 mm |
| Weight | <0.1 kg |
| Brand | Chengyi |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZDZ-1J |
| Measurement Principle | Thermal Conductivity (Pirani) |
| Pressure Range | 1.0 × 10⁵ Pa to 1.0 × 10⁻¹ Pa (Atmosphere to 0.1 Pa) |
| Vacuum Port | KF16 |
| Display | TFT Touchscreen Interface |
| Processor | ARM Cortex-M3 |
| Accuracy | ±20% of reading |
| Standard Gauge Tube | CY-1Z Pirani Sensor (KF16 flange) |
| Cable Length | 3 m |
| Dimensions (H×W×D) | 103 × 120 × 155 mm |
| Weight | ~2.0 kg |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Optional Outputs | 0–10 V analog output |
| Brand | Chotest |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | PO40 |
| Price | USD 1,700 (approx.) |
| Brand | Chotest |
|---|---|
| Model | PO40 |
| Origin | Guangdong, China |
| Type | In-machine contact touch probe |
| Transmission | Modulated infrared |
| Repeatability (2σ) | <1.0 µm |
| Trigger life | >10 million cycles |
| Battery life | ≥150 hours (5% duty cycle) |
| Operating range | XY plane ±360°, Z-axis ±85°, linear transmission distance up to 5 m (standard power mode) |
| Protection rating | IP68 (probe & receiver), IPX8 (probe body sealing) |
| Power source | Replaceable primary battery |
| Control interface | M-code compatible, auto-wake via receiver, programmable delay-off |
| Diagnostic feedback | Multi-state LED indicators (wake/sleep, ready/triggered, battery status) |
| Software integration | Compatible with Chotest in-machine measurement software for automated program generation, 3D coordinate acquisition, and GD&T-compliant reporting |