Physical Property Testing Instruments
Filter
Showing 4021–4050 of 4355 results
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Temperature Range | –70°C to +180°C |
| Humidity Range | 5% to 98% RH |
| Minimum Achievable Humidity | ≤5% RH (at 25°C) |
| Control Accuracy | ±0.5°C / ±2% RH |
| Uniformity | ±1.5°C / ±3% RH |
| Cooling Water Requirement | 10–28°C, 0.1–0.3 MPa |
| Power Supply | 380 VAC, 3-phase, 50/60 Hz |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, IEC 60068-2-1, IEC 60068-2-2, GJB 1032A–2012, MIL-STD-2164A, USP <1151> (Environmental Stress Screening Guidance) |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,100 (Reference Only) |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–1989, GB 2423.2–1989, GB 2423.22–1987, GB 10589–1989, GB 10592–1989, GB 11158–1989 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,100 (Reference Only) |
| Temperature Range | –70°C to +150°C |
| Humidity Range | 20–98% RH |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–1989, GB 2423.2–1989, GB 2423.22–1987, GB 10589–1989, GB 10592–1989, GB 11158–1989 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,100 (approx. ¥22,000) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 650 (FOB) |
| Compliance | ASTM D2210, TAPPI T403, ISO 2759, GB/T 6545, JIS L1004/L1018/L1031, K6328, P8131/P8112 |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 650 (FOB Guangdong) |
| Compliance Standards | ISO 2759, GB/T 6545, ASTM D2210, TAPPI T403, JIS L1004/L1018/L1031, QB/T 1057 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +5°C to 60°C |
| Internal Chamber Dimensions | W120 × H50 × D100 cm |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Spray Mode | Continuous or Cyclic |
| Chamber Material | High-Purity Grey PVC (Acid- and Alkali-Resistant) |
| Heating System | Independent Ni-Cr Alloy Heaters |
| Temperature Sensor | PT100 Platinum Resistance Thermometer |
| Control System | LED Digital PID Controller with Dual-Channel Display |
| Safety Features | Circuit Breakers, Dual Overheat Protection (Electronic & Mechanical), Integrated Water Filtration, Preheated Salt Solution System |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Capacity Options | 1000 kg / 2000 kg / 5000 kg |
| Test Area | 1200 × 1200 mm (customizable) |
| Resolution | 1/10,000 |
| Display Units | kg, N, lbf |
| Test Speed | 10 ± 3 mm/min |
| Overall Dimensions | 1200 × 1000 × 1400 mm |
| Approx. Weight | 750 kg |
| Power Supply | 220 V AC, 50 Hz |
| Load Cell | High-precision explosion-proof load cell (US-sourced) |
| Drive System | Taiwan-made AC frequency-controlled motor |
| Motion Mechanism | Precision ball screw actuation |
| Control System | Microprocessor-based controller with real-time compression monitoring and automatic crush detection |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Capacity Options | 1000 kg / 2000 kg / 5000 kg |
| Test Area | 1200 mm × 1200 mm (customizable) |
| Overall Dimensions | 1200 mm × 1000 mm × 1400 mm |
| Resolution | 1/10,000 F.S. |
| Display Units | kg, N, lb |
| Compression Speed | 10 ± 3 mm/min |
| Weight | Approx. 750 kg |
| Power Supply | 220 V AC, 50 Hz |
| Load Cell | High-Precision Explosion-Proof Load Cell (U.S.-sourced) |
| Drive System | Taiwan-sourced AC Frequency-Controlled Motor |
| Actuation | Precision Ball Screw Vertical Movement |
| Control System | Microprocessor-Based Digital Controller with Thermal Printer Integration |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Load Capacity | 60 kg / 150 kg (max) |
| Frequency Range (Manual) | 5–50 Hz |
| Sweep Frequency Range | 5–50 Hz |
| Table Dimensions | 1100 × 800 × 60 mm |
| Overall Unit Dimensions | 1100 × 800 × 900 mm |
| Displacement Amplitude (No-Load) | 0–3.5 mm |
| Timing Range | 0.01 s – 99.99 h |
| Waveform | Sinusoidal |
| Control Mode | Programmable Multi-Stage Sweep (up to 30 segments), Fixed-Frequency, Logarithmic/Linear/Multi-Octave Sweep |
| Power Supply | 3-phase 380 VAC ±5%, 50/60 Hz |
| Power Consumption | 4.2 kVA |
| Cooling Method | Air-Cooled |
| Compliance Standard | GB/T 2423.10 |
| Vibration Axes | Vertical + Horizontal (Simultaneous Dual-Axis Excitation) |
| Drive System | Four-Point Synchronized Electromagnetic Shaker |
| Control Interface | Digital PID Controller with Real-Time Parameter Display and Preview Curve Function |
| Structural Design | Integrated Rigid Base with Passive Vibration Isolation Mounts |
| Optional Features | Time-Based Test Termination, Amplitude Prediction Algorithm, EMI-Resistant Circuitry |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Quotation | Available Upon Request |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Internal Chamber Dimensions (W×D×H) | 900 × 600 × 500 mm |
| Test Temperature Range | 35–50 °C (chamber), 47–63 °C (saturated air tank) |
| Control Accuracy | ±0.1 °C (PID digital temperature controller) |
| Spray Nozzle Material | Borosilicate Glass (Pyrex®) |
| Heating System | Titanium-sheathed Infrared Heating Elements with Water-Jacketed Chamber Design |
| Compliance Standards | GB/T 2423.17 (Ka), GB/T 10587, GJB 150.11A, DIN 50021, ASTM B117, ISO 9227 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Frequency Range | 1–3000 Hz |
| Max. Payload | 100 kg |
| Sweep Rate | 0.1–5 oct/min |
| Control Mode | Sine Sweep, Fixed-Frequency, Resonance Search |
| Timing Accuracy | ±0.1 s (SAWANA Digital Timer) |
| Power Consumption | 60% lower than industry-average electrodynamic shaker controllers |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 16,800 (FOB) |
| Compliance | ISO 13374-2, ASTM D999, IEC 60068-2-27, MIL-STD-810H Method 516.8 |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 16,500 (FOB) |
| Compliance | ISO 2247, ASTM D880, ISTA 3A, MIL-STD-810H Shock Methods |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Distributor Type | Authorized General Distributor |
| Price | USD 3,200 (FOB) |
| Compliance | Fully Compatible with ISO 6892-1, ASTM E4, ASTM D638, ASTM D3039, ASTM D790, ISO 527-1, ISO 178, ISO 1183, ISO 2285, ISO 2921, EN 10002-1, GB/T 16491, GB/T 1040, GB/T 2792, GB/T 3923.1 |
| Brand | OEM / White-Label Manufacturer |
|---|---|
| Origin | Imported (Global Supply Chain) |
| Distributor Type | Authorized Industrial Distributor |
| Price | USD 3,200 (FOB) |
| Load Cell Accuracy | ±0.03% F.S. |
| Overload Capacity | 150% of Rated Capacity |
| Displacement Resolution | 1/100,000 Full Scale |
| Transient Response | Auto-compensated for thermal drift |
| Compliance Standards | ASTM D638, ASTM D882, ISO 527-1, ISO 1798, ISO 37, EN 10002-1, GB/T 1040, GB/T 2792, GB/T 16491 |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Load Capacity | Up to 5 kN (customizable from 100 N to 50 kN) |
| Force Resolution | 1/100,000 full scale |
| Force Accuracy | ±0.5% of reading (ASTM E4-compliant) |
| Crosshead Speed Range | 0.001–500 mm/min (adjustable in 0.001 mm/min increments) |
| Displacement Resolution | 0.001 mm |
| Encoder | 2500 PPR AC servo motor with high-stability pulse feedback |
| Drive System | Precision preloaded ball screw + linear guideways |
| Load Cell | Explosion-proof, temperature-compensated strain-gauge type, zero drift <0.01% F.S./°C, overload capacity 150% F.S., repeatability ±0.03% F.S. |
| Safety Features | Dual mechanical limit switches, software-based overload cutoff, emergency stop circuit per IEC 60204-1 |
| Compliance | ASTM D638, D882, D790, D3763, ISO 527, ISO 178, ISO 1133, GB/T 1040, GB/T 1447, USP <1041>, GLP-ready data audit trail |
| Brand | OK-NL |
|---|---|
| Capacity Options | 50 / 100 / 200 / 500 / 1000 kg |
| Load Resolution | 1/100,000 (1/250,000 for ≤1 kN models) |
| Load Accuracy | ≤0.5% FS (≤0.25% FS for ≤1 kN models) |
| Crosshead Travel | 1000 mm (excluding grips) |
| Test Speed Range | 5–300 mm/min (software-controlled, stepless adjustment) |
| Drive System | Panasonic AC servo motor + servo driver |
| Transmission | Precision ground ball screw + timing belt + Liming gearbox |
| Force Transducer | High-stability explosion-proof load cell with auto-thermal compensation, zero drift <0.01% FS/°C, repeatability ±0.03% FS, overload capacity 150% FS |
| Position Feedback | 2500 PPR optical encoder |
| Data Acquisition Resolution | 1/100,000 full scale |
| Compliance Standards | ASTM D412, D3574, D5035, D2061, D1445, D2290, D3759/M |
| Safety Features | Mechanical stroke limit switch, real-time overload warning, automatic stop-on-break, software-imposed force and displacement limits |
| Software Functions | Real-time stress–strain curve plotting, peak hold, auto-stop on specimen rupture, unit conversion (g/kg/N/kN/lb), report generation (customizable templates), data export (CSV, Excel), audit trail support for GLP/GMP environments |
| Dimensions (L×W×H) | 985 × 510 × 1600 mm |
| Power Supply | 220 V, 50/60 Hz |
| Brand | OEM / Custom-Branded |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Load Frame Capacity | 1 kN–50 kN (configurable) |
| Force Accuracy | ±0.5% of reading (full scale) |
| Displacement Resolution | 0.001 mm |
| Crosshead Speed Range | 0.001–500 mm/min (programmable) |
| Encoder Resolution | 2500 PPR |
| Force Transducer | Explosion-Proof Precision Load Cell with Automatic Thermal Compensation |
| Repeatability | ±0.03% F.S. |
| Overload Protection | 150% F.S. transient capacity |
| Safety Features | Mechanical travel limit switches, software-based load/position upper limits |
| Compliance Standards | ASTM D638, D882, D412, D3039, ISO 527-1, ISO 1798, ISO 37, GB/T 1040, GB/T 16491, GB/T 2792, GB/T 2790, GB/T 3923.1 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Standards Compliance | ASTM D638, ISO 527-1/2, GB/T 1040.1–2018, GB/T 16491–2008, GB/T 2792–2014, GB/T 2790–1995, GB/T 2791–1995, GB/T 13022–1991, GB/T 3923.1–2013, GB/T 528–2018, GB/T 6344–2008, GB/T 20310–2006, GB/T 3690–2009, GB/T 4944–2019, GB/T 3686–2014, GB/T 529–2008, GB/T 6344–2008, GB/T 17200–2008, GB/T 16825.1–2008, GB/T 3923.1–2013, GB/T 8808–1988, GB/T 2611–2007, GB/T 1040.2–2022 |
| Load Cell Accuracy | ±0.03% FS |
| Overload Capacity | 150% of rated capacity |
| Encoder Resolution | 2500 pulses/rev |
| Drive System | Panasonic AC servo motor |
| Transmission | Precision preloaded ball screw + linear guideways |
| Safety Features | Mechanical stroke limit switches, software-based overload warning, automatic emergency stop |
| Brand | OEM / Custom-Branded |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,500 (FOB) |
| Load Capacity Options | 50–1000 kgf |
| Force Resolution | 1/100,000 (up to 1 ton), 1/250,000 (≤1 ton) |
| Force Accuracy | ≤0.5% FS (≤0.25% FS for ≤1 ton) |
| Crosshead Travel | 1000 mm (excluding grips) |
| Test Speed Range | 5–300 mm/min (software-controlled, stepless adjustment) |
| Drive System | Panasonic AC servo motor + servo driver |
| Transmission | Precision ground ball screw + Liming reducer + synchronous belt |
| Load Cell | High-stability explosion-proof strain-gauge type, zero drift compensation, overload capacity 150% FS, repeatability ±0.03% FS |
| Position Feedback | 2500 PPR optical encoder |
| Compliance Standards | ASTM D412, D3574, D5035, D2061, ISO 37, 2285, 34-1, 34-2, GB/T 16491, GB/T 1040, GB/T 2790–2792, EN ISO 1798, DIN 53507-A, JIS K6854 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Compliance | GB/T 16491, GB/T 1040, GB/T 2790–2792, GB/T 3923.1, ISO 527, ISO 179, ASTM D638, ASTM D790, ASTM D1445, ASTM D3330 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Compliance | GB/T 16491, GB/T 1040, GB/T 8808, GB/T 13022, GB/T 2790–2792, GB/T 16825, GB/T 17200, GB/T 3923.1, GB/T 528, GB/T 2611, GB/T 6344, GB/T 20310, GB/T 3690, GB/T 4944, GB/T 3686, GB/T 529 |
| Force Accuracy | ±0.03% FS |
| Load Cell Overload Capacity | 150% |
| Position Resolution | 1/100,000 full scale |
| Encoder | 2500 PPR AC servo motor with Panasonic drive |
| Motion System | Precision ground ball screw + linear guide rails |
| Safety Features | Stroke limit switch, overload warning, automatic stop-on-break, real-time load monitoring |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Compliance | GB/T 16491, GB/T 1040, GB/T 2790–2792, GB/T 3923.1, GB/T 528, GB/T 17200, ISO 527, ISO 179, ASTM D638, ASTM D3039, ASTM D790, ASTM D1445 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Load Cell Accuracy | ±0.03% F.S. |
| Resolution | 1 part in 100,000 |
| Encoder | 2500 PPR AC Servo Motor |
| Travel Protection | Mechanical & Software Limit Switches |
| Data Acquisition | Real-time Curve Plotting, Peak Hold, Auto Stop on Break, Overload Protection, Temperature-Compensated Load Sensing |
| Compliance | ASTM D638, ISO 527, ISO 37, GB/T 1040, GB/T 3923 |
| Key Features | AC servo motor drive |
|---|---|
| Test speed | 5–300 mm/min (software-controlled) |
| Stroke | 1000 mm (excluding grips) |
| Dimensions | 985 × 510 × 1600 mm (L×W×H) |
| Power | 220 V, 50/60 Hz |
| Compliance | ASTM D412, D3574, D5035, ISO 37, 1421, 1798, GB/T 16491, GB/T 1040, and over 40 additional international standards |
| Load capacity options | 50, 100, 200, 500, 1000 kg |
| Unit switching | g, kg, N, kN, lbf |
| Software | Real-time curve plotting, peak hold, auto-stop at break, overload protection, data export, customizable reporting |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,200 (FOB) |
| Drive System | Panasonic AC Servo Motor |
| Encoder Resolution | 2500 PPR |
| Load Cell Accuracy | ±0.03% F.S. |
| Overload Capacity | 150% F.S. |
| Displacement Resolution | 1/100,000 full scale |
| Protection Features | Mechanical travel limit, overload alarm, automatic stop at break |
| Compliance Standards | GB/T 16491, GB/T 1040, GB/T 8808, GB/T 13022, GB/T 2790–2792, GB/T 16825, GB/T 17200, GB/T 3923.1, GB/T 528, GB/T 2611, GB/T 6344, GB/T 20310, GB/T 3690, GB/T 4944, GB/T 3686, GB/T 529 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,800 (FOB) |
| Load Capacity | 5 kN (standard), configurable up to 100 kN |
| Force Resolution | 1/100,000 full scale |
| Accuracy | ±0.5% of reading (ISO 7500-1 Class 1) |
| Crosshead Speed Range | 0.001–500 mm/min (adjustable in 0.001 mm/min increments) |
| Displacement Resolution | 0.001 mm |
| Data Acquisition Rate | 1 kHz |
| Compliance | ASTM E4, ASTM E8, ISO 6892-1, ISO 7500-1, GB/T 16491, GB/T 228.1 |