Physical Property Testing Instruments
Filter
Showing 4051–4080 of 12427 results
| Brand | HESON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | HS-TGA-302 |
| Test Environment | Ambient Pressure |
| Sample Capacity | 1 sample per run |
| Instrument Type | General-purpose |
| Temperature Range | RT to 1300 °C |
| Temperature Accuracy | ±0.1 K |
| Balance Sensitivity | 1 µg |
| Heating/Cooling Rate | 0–100 °C/min |
| Maximum Sample Mass | 5 g |
| Baseline Drift | ≤10 µg |
| Brand | Hexagon |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Super Volume 225 |
| Detector Type | High-Resolution CMOS Semiconductor Detector |
| Scanning Mode | Translation-Rotation (TR) |
| Spatial Resolution | 4 µm |
| Density Resolution | ≤0.1 µm (minimum detectable density variation) |
| X-ray Source | 225 kV Microfocus Tube |
| Penetration Capability | High (suitable for dense metals and composites) |
| Measurement Volume | 427 mm × 427 mm (max. field of view) |
| Dimensional Measurement Accuracy | (4.5 + L/50) µm (L in mm) |
| Density Measurement Accuracy | (4.5 + L/50) µm (L in mm) |
| Maximum Sample Weight | 10,500 kg |
| System Dimensions | 3520 mm × 2050 mm × 2700 mm |
| Radiation Shielding | Integrated self-shielding cabinet compliant with GBZ 117–2020 (Chinese national radiation safety standard) |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HFM-201 |
| Pricing | Upon Request |
| Brand | Hiden |
|---|---|
| Origin | United Kingdom |
| Model | CATLAB |
| Instrument Type | Chemisorption Analyzer / Catalytic Characterization System |
| Temperature Range | −196 °C to 1000 °C (selectable furnace options) |
| Heating Rate | 1–20 °C/min |
| Pressure Range | Ambient (atmospheric) |
| Gas Flow Range | 3–100 mL/min (up to 500 mL/min optional) |
| Mass Range | 1–200 amu (300 amu optional) |
| Response Time | <500 ms |
| Scan Speed | up to 100 amu/s |
| Detection Units | %, ppm, ppb |
| Gas Inlet Channels | 4 standard (8 optional) |
| Catalyst Cartridge System | Interchangeable, thermocouple-integrated |
| Reactor–MS Interface | Dead-volume-free, heated transfer line |
| Brand | Hiden |
|---|---|
| Origin | United Kingdom |
| Model | HTP1-V |
| Instrument Type | Physical/Chemical Adsorption Analyzer |
| Measurement Principle | Volumetric (Pressure-Step) Method |
| Gas Inlet Ports | 8 |
| Temperature Range | LN₂ (–196 °C) to 500 °C |
| Isothermal Stability | ±0.1 °C |
| Heating Rate | 1–20 °C/min |
| Pressure Range | Ultra-High Vacuum (UHV, <1×10⁻⁹ mbar) to 200 bar (20 MPa) |
| Primary Function | High-Pressure Hydrogen Adsorption/Desorption Characterization |
| Optional Mass Spectrometer | m/z 1–200 amu (300 amu optional), response time <300 ms, quantitative output in ppm/ppb/%, scan speed up to 100 amu/s |
| Brand | Hiden |
|---|---|
| Origin | United Kingdom |
| Model | IGA |
| Balance Capacity | 1 g (5 g optional) |
| Sample Mass Range | 0–100 mg (0–200 mg with 5 g balance) |
| Mass Resolution | 0.1 µg (0.2 µg with 5 g balance) |
| Mass Stability | ±1 µg (long-term, static), ±0.1 µg (short-term) |
| Vacuum Base Pressure | <1×10⁻⁶ mbar |
| Maximum Operating Pressure | 10 bar (20 bar optional) |
| Pressure Resolution | 1/16,000 of full scale |
| Pressure Accuracy | ±0.02% of full scale |
| Temperature Range | −270 °C to 1000 °C |
| Temperature Resolution/Accuracy | ±1 °C (Type K thermocouple), ±0.01–0.1 °C (PRT) |
| Temperature Response Time | 0.05 s (Type K), 1 s (PRT) |
| Pressure Vessel Certification | ASME Section VIII Div. 1 / BS 5500 Category III |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | IGA100 |
| Pricing | Upon Request |
| Brand | Hiden |
|---|---|
| Origin | United Kingdom |
| Model | IGAsorp |
| Measurement Principle | Gravimetric (Microbalance-Based Dynamic Vapor Sorption) |
| Sample Capacity | Up to 4.5 g |
| Minimum Sample Mass | ~1 mg |
| Microbalance Resolution | 0.1 µg (at 100 mg range) |
| Long-Term Stability | ±1 µg/week |
| RH Control Range | 0–95% RH |
| RH Accuracy | ±0.1% RH (control), ±1% RH (0–90% RH), ±2% RH (90–100% RH) |
| RH Response Time | <15 s to 90% of step change |
| RH Ramp Rate | 0.1–100% RH/hour |
| Temperature Range | 5–85 °C (ambient-controlled chamber) |
| Temp Stability | ±0.05–±0.1 °C |
| Carrier Gas | Dry air or N₂ |
| Flow Rate | 100–500 mL/min |
| Humidification Reservoir | 200 mL |
| Sample Holders | Borosilicate glass or stainless-steel mesh crucibles |
| Brand | Hiden |
|---|---|
| Origin | United Kingdom |
| Model | MBR |
| Instrument Type | Physical/Chemical Adsorption Analyzer |
| Operating Pressure Range | Up to 10 bar |
| Temperature Range | 120°C to 300°C |
| Flow Configuration Modes | Co-current and Cross-flow |
| Integrated Detection | Close-coupled Quadrupole Mass Spectrometer (QMS) |
| Valve Architecture | Pneumatically Actuated, Ultra-Low-Dead-Volume Switching Valves |
| Control System | Fully Programmable, Automated Sequence Execution |
| Membrane Cell | Precision-Machined, Integral Support Structure |
| Compliance | Designed for ASTM D1434, ISO 15105-1, and ISO 2556 gas permeation test protocols |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | XEMIS |
| Pricing Range | USD 130,000–260,000 (FOB) |
| Measurement Principle | Gravimetric Method |
| Temperature Range | 77 K to 773 K (–196 °C to 500 °C) |
| Pressure Range | Ultra-High Vacuum (UHV) to 200 bar |
| Ultimate Vacuum | 1 × 10⁻⁸ Torr |
| Sensitivity | 0.2 µg |
| Long-Term Stability | ±5 µg |
| Maximum Sample Capacity | 5 g |
| Dynamic Weighing Range | 0–200 mg |
| Construction | All-Metal VCR-Sealed Architecture |
| Calibration | Zero-Drift-Free Operation, No In-Situ Re-Zero Required |
| Brand | Hiden |
|---|---|
| Origin | United Kingdom |
| Model | XEMIS |
| Instrument Type | Specific Surface Area and Pore Size Analyzer |
| Number of Analysis Stations | 1 |
| Pore Size Measurement Range | < 50 nm |
| Temperature Range | 77 K to 773 K (–196 °C to 500 °C) |
| Pressure Range | Up to 200 bar |
| Analysis Theory | BJH, Langmuir, DFT, t-plot, α<sub>s</sub>-method |
| Balance Capacity | 5 g |
| Balance Resolution | 0.2 µg |
| Long-term Stability | ±5 µg |
| Dynamic Weighing Range | 0–200 mg |
| Construction | All-metal VCR-fitted architecture |
| Compliance | Designed for GLP/GMP environments with audit-trail-capable software |
| Brand | YIHENG |
|---|---|
| Model | BPHJ Series |
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Pricing | Upon Request |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price Reference | USD 3,100 (approx.) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price Reference | USD 3,100 (ex-works, subject to configuration and certification requirements) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price Reference | USD 3,100 (FOB) |
| Compliance Standards | GB/T 5170.2–1996, GB/T 10592–1993, GB/T 2423.2–2008 (IEC 60068-2-2), GJB 150.3A–2009, GJB 150.4A–2009, MIL-STD-810G |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price Reference | USD 3,100 (excl. tax & freight) |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 920 (FOB) |
| Temperature Range | Ambient +20°C to 500°C |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | 1.2 mm Cold-Rolled A3 Steel with Powder Coating |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Door Insulation | Glass Fiber Mat |
| Heating System | 2 kW Nickel-Chromium Far-Infrared Heaters (Independent Circuit) |
| Control System | Fuji Electric PXR Series PID Controller with SSR Output |
| Sensor | Pt100 Platinum Resistance Thermometer |
| Air Circulation | Forced Horizontal Airflow via High-Temperature Turbine Fan (SUS310S Shaft, Ceramic Bearings) |
| Safety Features | Overtemperature Cut-off, Leakage Current Protection, Real-Time Thermal Runaway Monitoring |
| Compliance | Designed per IEC 60068-2-2 (Test B: Dry Heat), ASTM D3045, and ISO 188 Annex C for thermal aging of polymers |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 920 (approx. based on ¥6500 at 1:7.07 exchange rate) |
| Temperature Range | Ambient +20°C to 500°C |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | 1.2 mm A3 Cold-Rolled Steel with Powder Coating |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Heating System | PID + Solid-State Relay (SSR) Controlled Resistive Heating |
| Air Circulation | Forced Horizontal Airflow via High-Temperature Turbine Fan |
| Temperature Sensor | Pt100 Platinum Resistance Thermometer |
| Compliance | GB/T 2423.2-2008 (Equivalent to IEC 60068-2-2) |
| Safety Features | Overtemperature Cut-off, Leakage Current Protection, Audible/Visual Alarm |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 920 (FOB) |
| Temperature Range | Ambient +20°C to 500°C |
| Chamber Construction | External SECC steel with powder-coated finish |
| Insulation | Rigid polyurethane foam + glass fiber (walls & door) |
| Air Circulation | Forced horizontal airflow via high-temp resistant centrifugal fan |
| Heating System | PID + SSR controlled far-infrared Ni-Cr alloy heaters (2 kW × 1) |
| Safety | Dual-stage overtemperature protection, automatic load cutoff, thermal fuse |
| Compliance | Designed per GB/T 2423.2-2008 (IEC 60068-2-2:2007 equivalent) |
| Control Interface | Digital PID controller with auto-tuning, real-time temperature display, and deviation alarm |
| Key | Brand: OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT to 300°C (customizable up to 500°C) |
| Control Accuracy | ±0.5°C |
| Temperature Uniformity | ±1.5°C |
| Interior Material | SUS#304 Stainless Steel |
| Exterior Material | Powder-Coated Cold-Rolled Steel |
| Heating System | 2 kW Nickel-Chromium Far-Infrared Heater |
| Control System | Microprocessor-Based PID Controller with SCR Power Regulation |
| Compliance | GB/T 2423.2 (High-Temperature Environmental Testing for Electrical and Electronic Products) |
| Power Supply | AC 220±5% V / 50 Hz or AC 380±5% V / 50 Hz |
| Internal Dimensions (OK-T-72) | 45×40×40 cm (W×H×D) |
| Internal Dimensions (OK-T-150) | 50×60×50 cm (W×H×D) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+20°C to 500°C (customizable) |
| Control Accuracy | ±0.5°C |
| Uniformity | ±1.5°C |
| Internal Construction | SUS304 Stainless Steel |
| External Construction | 1.2 mm A3 Steel with Powder-Coated Finish |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Air Circulation | Forced Horizontal Airflow via High-Temperature Turbine Fan |
| Heating System | PID + Solid-State Relay (SSR) Control |
| Safety Protections | Over-Temperature Cut-Off, Leakage Current Protection, Audible/Visual Alarm |
| Compliance | GB/T 2423.2 (Equivalent to IEC 60068-2-2), GLP-Compatible Operation |
| Key Features | Temperature Range: RT +10 °C to 300 °C (customizable up to 500 °C) |
|---|---|
| Internal Dimensions | 500 × 600 × 500 mm (W×H×D) |
| External Dimensions | 700 × 1200 × 700 mm (W×H×D) |
| Temperature Uniformity | ±1.5 °C |
| Control Accuracy | ±0.5 °C |
| Heating System | Dual independent 2 kW nickel-chromium far-infrared heaters |
| Sensor | PT100 platinum resistance thermometer |
| Controller | LED digital or optional high-resolution touchscreen microprocessor controller with programmable timer (0–999 min) |
| Air Circulation | Forced convection via bottom-mounted centrifugal blower with left-side lateral airflow duct |
| Construction | Interior—SUS#304 stainless steel |
| Standard Accessories | Two adjustable stainless steel wire shelves |
| Power Supply | AC 220 V ±5 % / 50 Hz or AC 380 V ±5 % / 50 Hz |
| Total Rated Power | 4 kW (dual heater configuration) |
| Safety Protections | Over-temperature alarm, over-temperature cut-off, earth leakage protection |
| Compliance | Designed and validated per GB/T 2423.2–2022 (“Environmental testing — Part 2: Tests — Test B: Dry heat”) |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 920 (FOB) |
| Internal Chamber Material | SUS304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Door Insulation | Glass Fiber Cotton |
| Outer Casing | 1.2 mm Cold-Rolled A3 Steel with Electrostatic Powder Coating |
| Heating System | 2 kW Far-Infrared Ni-Cr Alloy Heater (Independent Circuit) |
| Temperature Control | Fuji Electric PXR Series PID Controller with Auto-Tuning |
| Sensor | Pt100 Platinum Resistance Thermometer |
| Compliance | GB/T 2423.2-2008 (Equivalent to IEC 60068-2-2:2007, ASTM D3574, ISO 188) |
| Safety Features | Over-Temperature Alarm & Cut-Off, Earth Leakage Protection, Real-Time Monitoring |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HH18 |
| Pricing | Available Upon Request |
| Compliance | ISO, ASTM, DIN, JIS, SAE, BS, ANSI, GM, U.S. Federal Standards, GB (China National Standards) |
| Humidity Range | 10–100% RH |
| Condensation Simulation | Q8 Cold-Condensation System |
| Irradiance Control | Electronic Eye® Spectral Irradiance Monitoring |
| Temperature Measurement | Black Panel Thermometer (BPT), High Reproducibility |
| Calibration Traceability | CR-10 Radiometer (Q-Lab Patented, NIST-Traceable) |
| Sample Capacity | 24 pcs @ 75 mm × 300 mm or 48 pcs @ 75 mm × 150 mm |
| Test Cycles | Simultaneous/Sequential Humidity, Condensation, and Water Spray |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HH-138 |
| Temperature Range | Ambient to 260 °C |
| Control Accuracy | ±0.5 °C |
| Heating Ramp Time | ~15 min (Ambient to 100 °C) |
| Interior Material | SUS430 Stainless Steel (≥1.2 mm thickness) |
| Exterior Material | SECC Cold-Rolled Steel with Powder Coating (≥1.5 mm thickness) |
| Insulation | Imported Rock Wool |
| Viewing Window | Dual-Layer Tempered Glass |
| Air Circulation | Forced Horizontal Airflow with 1 HP High-Temperature Motor, Multi-Blade Turbine Fan, and Adjustable Baffle |
| Safety Features | Independent Over-Temperature Protection |
| Controller | PID Microprocessor-Based Digital Controller with Dual PV/SV Display, K-Type Thermocouple Input (CA), SSR Solid-State Relay Output, Honeycomb Heating Element |
| Timer Function | 99.9 s to 999 h |
| Key | Brand: OEM |
|---|---|
| Origin | Imported |
| Construction | SUS304 Inner Chamber, A3 Steel Outer Casing w/ Powder Coating |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Exchange Timing | 1 min – 99 h adjustable |
| Power | 4.0–9.0 kW (model-dependent) |
| Internal Dimensions | 450×450×500 mm to 800×1000×1000 mm |
| Insulation | High-Density Glass Fiber Mat |
| Air Circulation | Horizontal Forced Convection w/ Adjustable Baffles |
| Controller | PID + SSR Microprocessor-Based Digital Controller |
| Timer Range | 1–9999 min |
| Safety Protections | Overtemperature, Overcurrent, Leakage, Motor Overheat, Short-Circuit |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-05, UL 1581, GB/T 2423.2, IEC 60068-2-2, JIS C 0021, VDE 0470 |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT to 200 °C (standard), up to 300 °C or 500 °C (custom) |
| Control Accuracy | ±0.5 °C |
| Temperature Uniformity | ±1.5 °C |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | 1.2 mm A3 Cold-Rolled Steel with Powder Coating |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Heating System | 2 kW Far-Infrared Ni-Cr Alloy Heater |
| Controller | Fuji PID Digital Microprocessor Controller with Auto-Tuning |
| Sensor | Pt100 Platinum Resistance Thermometer |
| Safety Features | Over-Temperature Alarm, Over-Temperature Cut-Off, Earth Leakage Protection |
| Compliance | GB/T 2423.2 (High-Temperature Environmental Testing for Electrical and Electronic Products) |
| Power Supply | AC 220 V ±5% / 50 Hz or AC 380 V ±5% / 50 Hz |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 950 (FOB) |
| Temperature Range | Ambient +20°C to 500°C |
| Exterior Material | 1.2 mm Cold-Rolled SECC Steel with Powder Coating |
| Interior Material | SUS304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Door Insulation | Glass Fiber Wool |
| Heating System | 2 kW Far-Infrared Ni-Cr Alloy Heater (Independent High-Temp Circuit) |
| Control System | Fuji Electric PID Controller with SSR Output |
| Sensor | Pt100 Platinum RTD |
| Air Circulation | Forced Horizontal Airflow via High-Temperature Turbine Fan |
| Safety Features | Overtemperature Cut-off, Leakage Current Protection, Audible/Visual Alarm |
| Compliance | Designed per IEC 60068-2-2 (Ed. 7.0), ASTM D3045, and ISO 188 Annex A |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | Ambient +20°C to 500°C |
| Construction | SECC External Shell + SUS304 Stainless Steel Interior |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Heating System | 2 kW Nickel-Chromium Far-Infrared Heaters (Independent High-Temp Circuit) |
| Control System | Fuji Electric PID Controller with SSR Output |
| Sensor | Pt100 Platinum Resistance Thermometer |
| Air Circulation | Forced Horizontal Airflow via High-Temperature Turbine Fan |
| Safety | Dual Overtemperature Protection (Fiber Thermal Cut-off + Microprocessor-Based Auto-Shutdown) |
| Compliance | Designed for ASTM D3045, ISO 4892-2, IEC 60068-2-2, and MIL-STD-810H thermal aging protocols |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/h |
| Adjustable Exchange Time | 1 min – 99 h |
| Chamber Volume Options | 100 L to 800 L |
| Power Consumption | 4.0–9.0 kW |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93 (2005), UL 1581, GB/T 2423.2, IEC 60068-2-2, JIS C 0068, VDE 0470-1 |