Burkle MTD5603-3000 / MTD5603-1100 Foot-Operated Solvent Pump
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MTD5603-3000 / MTD5603-1100 |
| Pricing | Upon Request |
Overview
The Burkle MTD5603-3000 and MTD5603-1100 foot-operated solvent pumps are precision-engineered manual transfer systems designed for safe, controlled, and repeatable dispensing of high-purity and hazardous liquids in laboratory, quality control, and industrial R&D environments. Based on positive displacement diaphragm pumping principles, these units operate without electrical power or compressed air—relying solely on ergonomic foot actuation to generate consistent suction and discharge pressure. All wetted components—including the pump head, immersion tube, valve assembly, and outlet spout—are constructed from 316 stainless steel and FPM (fluoroelastomer) seals, ensuring chemical compatibility with aggressive solvents, hydrocarbons, alcohols, esters, and halogenated compounds. The system is explicitly certified for use with flammable liquids under ATEX-compliant grounding protocols and integrates essential safety features such as static-dissipative pathways and integrated air filtration.
Key Features
- Foot-actuated diaphragm mechanism enabling hands-free, operator-controlled flow initiation and termination
- Chemically inert wetted path: 316 stainless steel body and FPM elastomer seals rated for continuous exposure to Class I flammable liquids (e.g., acetone, hexane, toluene, ethanol)
- Adjustable immersion tube length (continuously variable up to 95 cm) to accommodate drums and containers ranging from 5 L to 220 L capacity
- Standardized 2″ NPT (R2″) threaded inlet interface compatible with commercial steel, HDPE, and UN-certified hazardous material drums
- Integrated quick-connect clamp for rapid attachment/detachment of anti-static air supply tubing (MTD5602-1000 optional)
- Stainless steel/PTFE-coated outlet spout with non-drip design and fixed discharge orientation (non-adjustable delivery tube)
- Optional particulate air filter (ISO Class 5 compatible) for applications requiring ultra-clean liquid transfer, such as reference standard preparation or calibration solution handling
Sample Compatibility & Compliance
These pumps are validated for use with low-viscosity liquids (≤ 50 mPa·s at 20 °C) and vapor pressures below 100 kPa absolute. They meet EN 13847:2003 requirements for manual solvent transfer equipment used in explosion-hazardous areas when operated with proper grounding (IEC 61340-4-1). The MTD5603 series complies with EU Machinery Directive 2006/42/EC and carries CE marking. For laboratories operating under GLP or ISO/IEC 17025 frameworks, the system supports traceable operation via documented grounding verification and mechanical maintenance logs. Not intended for viscous, abrasive, or suspended-solid-containing media.
Software & Data Management
As a purely mechanical, non-electronic device, the MTD5603 series does not incorporate embedded firmware, digital interfaces, or data logging capabilities. Its operation requires no software installation, network connectivity, or cybersecurity validation. However, integration into regulated workflows is supported through external documentation practices: each unit can be assigned a unique asset ID, logged in instrument inventory registers, and included in preventive maintenance schedules aligned with ISO/IEC 17025 Clause 6.4.2 (Equipment Management). Optional grounding verification kits (MTD5602-1000) include calibration-certificate-traceable resistance test reports suitable for FDA 21 CFR Part 11 audit trails when paired with electronic lab notebook (ELN) entries.
Applications
- Transfer of certified reference materials (CRMs) and calibration standards in petroleum testing labs (ASTM D97, D445, D86)
- Safe dispensing of flammable solvents during GC, HPLC, and FTIR sample preparation in refinery QC labs
- Controlled filling of volumetric flasks and autosampler vials under inert atmosphere gloveboxes
- Drum-to-bottle decanting in GMP-compliant pharmaceutical excipient handling (USP )
- On-site sampling and aliquoting in field-deployable environmental testing units (EPA Method 502.2, 8021B)
FAQ
Is electrical power or compressed air required to operate this pump?
No. The MTD5603 series operates exclusively via foot pedal actuation and requires no external energy source.
Can this pump be used with corrosive acids such as nitric or hydrochloric acid?
No. While resistant to many organic solvents, the FPM seals and stainless steel components are not rated for prolonged contact with strong mineral acids or oxidizers.
What is the maximum recommended drum size?
The system is validated for drums up to 220 L (55 US gal) with standard R2” (2″ NPT) bung threads.
Is the outlet flow rate adjustable?
Flow rate is operator-dependent and determined by pedal stroke frequency and immersion depth; no mechanical flow control valve is integrated.
Does the pump include grounding hardware?
Grounding clamps and conductive hoses are sold separately (e.g., MTD5602-1000); proper static dissipation must be verified prior to use with Class I liquids.
