- All
- Favorite
- Popular
- Most rated
| Brand | Aralab |
|---|---|
| Model | Fitoterm 150 CTE2 |
| Chamber Type | Vertical Dual-Zone (Hot/Cold) |
| Temperature Range (Hot Zone) | RT to +200 °C |
| Temperature Range (Cold Zone) | –75 °C to +60 °C |
| Transfer Time | ≤ 5 s |
| Test Chamber Dimensions (H×W×D) | 410 × 470 × 650 mm |
| External Dimensions (H×W×D) | 2180 × 950 × 1910 mm |
| Load Capacity | 50 kg |
| Temperature Accuracy | ±0.1 °C |
| Temperature Uniformity | ≤ ±1.0 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Heating Rate | 0.2 °C/s |
| Weight | 900 kg |
| Cooling System | Compressor-based, CFC-free |
| Control Interface | 4″ color touchscreen with PLC-based controller |
| Programmability | Up to 50 programs, 50 steps each |
| Data Retention | Non-volatile memory with power-loss recovery |
| Safety | Dual independent PT100 Class A sensors per zone, adjustable high/low temperature limits, audible/visual alarms, heated door with dual-seal locking mechanism |
| Communication | Standard RS232 interface |
| Optional Cooling | Water-cooled (external chiller required) or air-cooled configuration |
| Brand | ARALAB |
|---|---|
| Model | FitoClima 1000 ECV45 |
| Temperature Range | −45 °C to +180 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Uniformity | ±1 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Range | 10–98% RH (at 10–90 °C) |
| Humidity Accuracy | ±0.1% RH |
| Humidity Fluctuation | ±1% RH |
| Humidity Uniformity | ±2% RH |
| Internal Volume | 1000 L |
| Vibration Mode | Horizontal Linear Motion & Vertical Elevating Motion |
| Control System | Integrated Programmable Environmental Controller |
| Brand | ARALAB |
|---|---|
| Model | FitoClima 600 |
| Internal Volume | 600 L |
| Temperature Range | −5 °C to +45 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Uniformity | ±1.0 °C (at setpoint) |
| Temperature Fluctuation | ±0.5 °C (1σ) |
| Humidity Range | 20–95% RH |
| Humidity Uniformity | ±2% RH |
| Humidity Fluctuation | ±0.5% RH (1σ) |
| Shelf Dimensions | 630 mm × 510 mm |
| Shelf Load Capacity | 18 kg per shelf |
| Standard Shelves | 4 stainless steel shelves |
| Max. Shelves | 10 |
| Total Standard Shelf Area | 1.33 m² |
| External Dimensions (H×W×D) | 1980 × 745 × 950 mm |
| Net Weight | 175 kg |
| Power Supply | 1/N/PE, 230 V ±10%, 50 Hz, 16 A |
| Water Supply | Deionized or distilled water, 1–5 bar, conductivity <40 μS/cm |
| Brand | ARALAB |
|---|---|
| Model | FitoClima 600 PLH / FitoClima 1200 PLH |
| Temperature Range | 5°C to +45°C (±0.1°C) |
| Humidity Range | 40–90% RH (±0.1% RH) |
| Light Intensity | 0–300 µmol/m²·s (up to 21,500 Lux) |
| Internal Volume | 600 L / 1200 L |
| Illumination Type | White LED or Fluorescent Plant-Growth Lighting |
| Temperature Uniformity | ±1.0°C |
| Humidity Uniformity | ±2% RH |
| Airflow Control | 1–100% adjustable (0.3–1 m/s) |
| Compliance | EN 60068-3-5, IEC 61000-6-3, EMC 2004/108/EC, MD 2006/42/CE, LVD 2006/95/CE, EN 14509-CPR 305/2011/EU, EN 13823:2010+A1:2014 |
| Brand | ARALAB |
|---|---|
| Cabinet Type | Upright Walk-in |
| Humidity Range | 35–90 %RH |
| Temperature Stability | ±0.5 °C |
| Compliance | GMP, FDA 21 CFR Part 11 (audit trail capable), ICH Q1–Q5, WHO TRS 992, EU Annex 15, GSP |
| Brand | ARALAB |
|---|---|
| Model | FITOCLIMA 600 PLH-R / FITOCLIMA 1200 PLH-R |
| Chamber Type | Vertical Upright Environmental Test Chamber |
| Temperature Range | –5 °C to +45 °C (dark), 2 °C to +45 °C (light on) |
| Temperature Uniformity | < ±2.0 °C (light on) |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Range | 40–80 % RH (light on) |
| Humidity Fluctuation | ±0.5 % RH |
| Humidity Uniformity | < ±2 % RH at 4500 Lux, ±5 % RH at full illumination |
| Visible Light Intensity | Up to 26,000 Lux (cold white LED source) |
| Near-UV Irradiance | 30 W/m² (320–400 nm) |
| Light Control Resolution | Adjustable in 1 % increments |
| Illumination Area per Shelf | 0.14 m² |
| Accumulated Light Dose | 1.2 M·Lux (visible, ≤48 h), 200 W·h/m² (near-UV, ≤7 h) |
| Power Supply | 1/N/PE AC 230 V ±10 %, 50 Hz, 16 A |
| Internal Construction | AISI 304 stainless steel |
| External Casing | Powder-coated galvanized steel |
| Insulation | High-density polyurethane foam |
| Controller | ClimaPlus© 7″ color touchscreen interface with non-volatile memory, Ethernet/Wi-Fi/VLAN/VPN connectivity, 32 programmable profiles (24 steps each), password-protected access, built-in data logger (1-year retention), USB export (read-only), real-time diagnostics, alarm history with timestamped event logging, remote monitoring and control via web browser or mobile app |
| Brand | Airs |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | AIH & AWIH |
| Cabinet Material | Polypropylene (PP) |
| Ventilation Type | Ductless (Recirculating) |
| Control System | Airs–Touch Intelligent Touchscreen Interface |
| Real-time Monitoring | Fan Status, Filter Saturation, Face Velocity, Ambient Temperature & Humidity |
| Primary Use | Benchtop Chemical Handling, Instrument Enclosure, and Pre-analytical Lab Protection |
| Compliance Framework | Designed per EN 14175-3 (2022), ISO 10966:2018, and aligned with ANSI/ASHRAE 110–2016 testing methodology for ductless fume hood performance validation |
| Brand | Airs |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | ATH |
| Quotation | Upon Request |
| Construction Material | Polypropylene (PP) |
| Ventilation Type | Ductless (Self-Contained Filtration System) |
| External Dimensions (L) | 1500 mm (ATH-1503), 1800 mm (ATH-1804) |
| Airflow Capacity | 690 m³/h (ATH-1503), 920 m³/h (ATH-1804) |
| Filter Module Rows | 3 (ATH-1503), 4 (ATH-1804) |
| Brand | Airs |
|---|---|
| Model | AFH |
| Type | Ductless (Recirculating) Fume Hood |
| Construction Material | Polypropylene (PP) |
| Origin | Shanghai, China |
| Airflow Capacity | 210–840 m³/h (model-dependent) |
| Filter Modules | 1–4 modular activated carbon + particulate filter units |
| Real-time Monitoring | Face velocity, fan status, filter saturation, ambient temperature & humidity |
| Control System | Airs-Touch intelligent touchscreen interface |
| Compliance | Designed for ISO 15195:2013-compliant laboratory environments |
| Brand | Airs |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | AGS |
| Pricing | Upon Request |
| External Dimensions (L) | 900 mm |
| Airflow Capacity | 230 m³/h |
| Filter Module Rows | 1 |
| Display | 5-inch Medical-Grade HD Touchscreen |
| Control System | Airs–Touch Intelligent Touch OS |
| Connectivity | Mobile App Integration for Remote Monitoring |
| Ventilation Mode | Continuous Negative-Pressure Airflow |
| Real-Time Monitoring | Fan Status, Filter Efficiency, Ambient Temperature & Humidity |
| Optional Accessory | Telescopic Pull-Out Storage Trays |
| Compliance | Designed for ISO 14644-1 Class 8 cleanroom-adjacent environments and aligned with EN 14175-3 fume cabinet safety principles |
| Brand | Airs |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | AEH |
| Quotation | Upon Request |
| Cabinet Material | Polypropylene (PP) |
| Ventilation Type | Ductless (Recirculating) |
| External Dimensions (L) | 900 mm |
| Airflow Capacity | 210 m³/h |
| Filtration Module Rows | 1 |
| Display | 5-inch Medical-Grade HD Touchscreen |
| Real-Time Monitoring | Fan Status, Filter Efficiency (%), Face Velocity (m/s), Ambient Temperature & Humidity |
| Connectivity | Bluetooth/Wi-Fi Enabled Mobile App Integration |
| Activated Carbon Media | Optimized Coconut Shell-Based with Controlled Micropore/Mesopore/Macropore Distribution, Enhanced Specific Surface Area, Iodine Number & pH Stability, Reduced Desorption Risk |
| Brand | Airs |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | AGS Fire-Resistant Cabinet |
| Pricing | Available Upon Request |
| Airflow Capacity | 230 m³/h |
| Filter Configuration | Dual-stage (Pre-filter + H14 HEPA) |
| Cabinet Ventilation | Negative-pressure internal airflow |
| Monitoring | Real-time fan status, filter efficiency, temperature & humidity |
| Smart Management | Layer-level chemical inventory tracking (name, quantity, location), audit-ready logging |
| Optional Modules | Air quality sensor suite, differential pressure monitoring, pull-out storage trays, castor-mounted base |
| Brand | AICHUN |
|---|---|
| Origin | Zhejiang, China |
| Model Variants | PPS-10HD, PPS-100HD, PPS-PilotHD |
| Pump Flow Ranges | 0.001–10 mL/min (PPS-10HD), 0.01–100 mL/min (PPS-100HD), 1–400 mL/min (PPS-PilotHD) |
| Max Pressure | 20 MPa (PPS-10HD), 10 MPa (PPS-100HD), 2 MPa (PPS-PilotHD) |
| UV Detection | 200–400 nm (standard), up to 800 nm (optional) |
| Conductivity Range | 0.00–1000.00 mS/cm |
| Gradient Accuracy | ±0.6% to ±2% (model-dependent) |
| System Dimensions (W×H×D) | 482 × 661 × 432 mm |
| Weight | ≤65 kg (fully configured) |
| Power | 100–240 VAC, 50/60 Hz |
| Compliance | Audit Trail-enabled PPSN Software (21 CFR Part 11 ready) |
| Brand | Airs |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | AWF |
| Pricing | Available Upon Request |
| External Dimensions (L×W×H, mm) | 900×650×880 / 1300×650×1080 |
| Internal Dimensions (L×D×H, mm) | 880×550×600 / 1280×550×600 |
| Airflow Capacity | 200–300 m³/h / 400–600 m³/h |
| Average Face Velocity | 0.3–0.45 m/s |
| Power Consumption | 45 W / 75 W |
| Voltage/Frequency | 90–240 V, 50–60 Hz |
| Sound Pressure Level | <54 dBA / <56 dBA |
| OEB Classification | OEB 5 |
| Filter Module Rows | 1 |
| Brand | Airs |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | Domestic (China) |
| Model | Airs |
| Pricing | Available Upon Request |
| Brand | ARALAB |
|---|---|
| Model | FitoClima |
| Temperature Uniformity | ≤ ±1.0°C |
| Temperature Stability | ≤ ±0.5°C |
| Humidity Uniformity | ≤ ±2.0% RH |
| Humidity Stability | ≤ ±1.0% RH |
| Internal Construction | AISI 304 stainless steel (fully welded) |
| External Construction | Epoxy-coated galvanized steel (RAL 7035) |
| Cooling System | Hermetic compressor-based, low-noise, fluorocarbon-free refrigeration |
| Heating System | Stainless steel annular tubular heaters mounted above fans |
| Air Circulation | Dual variable-frequency fans (top & rear-mounted) with external air exchange ports |
| Safety Systems | Independent high/low temperature & humidity alarms with automatic shutdown and fault-locked operation |
| Controller | Full-color touchscreen interface |
| Compliance | Designed for ISO 14644, ICH Q1–Q5, USP <1151>, and GLP-compliant stability testing environments |
| Brand | JULABO-Chemtron |
|---|---|
| Origin | Germany |
| Generation Principle | Vacuum-driven Hollow-Fiber Membrane Separation |
| Nitrogen Flow Rate | 10–120 L/min |
| Nitrogen Purity | 98–99.9% |
| Nitrogen Dew Point | < −40 °C |
| Output Pressure | 7 bar (100 psi) |
| Air Flow (Dual Outputs) | up to 70 L/min @ 7 bar & 25 L/min @ 4 bar |
| Inlet Pressure | 8.5–10 bar |
| Pressure Drop | ≤1.5 bar |
| Particle Filtration | ISO 8573-1:2010 Class 1.2.1 |
| Operating Temperature | 15–35 °C |
| Certifications | CE, FCC, CSA, Factory-IQ/OQ Documentation Available |
| Brand | Liebherr |
|---|---|
| Model | LKexv 1800 MediLine |
| Origin | Germany |
| Temperature Range | +1 °C to +15 °C (Storage), +10 °C to +30 °C (Ambient Operating Range) |
| Net Capacity | 160 L |
| Total Volume | 180 L |
| Dimensions (D×W×H) | 600 × 600 × 860 mm |
| Weight (Net) | 38 kg |
| Power Consumption | 110 W |
| Noise Level | 47 dB(A) |
| Refrigerant | R600a |
| ATEX Classification | II 3G Ex ec IIC T6 Gc |
| Compliance | EN 60068-3, IEC 61000-6-3, IEC 61000-6-2, 2014/34/EU (ATEX) |
| Brand | NanoTemper |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | PR Panta Plus Robotic Autosample |
| Principle | Microfluidic Capillary Electrophoresis Coupled with Intrinsic Tryptophan Fluorescence Detection (not DLS — correction based on official NanoTemper documentation) |
| Temperature Control Range | 15 °C to 110 °C |
| Sample Volume | 10 µL per capillary |
| Sample Format | Disposable fused-silica capillaries (pre-filled or user-loaded) |
| 21 CFR Part 11 Compliance | Yes |
| Dimensions | 110 cm (W) × 188 cm (H) × 90 cm (D) |
| Brand | Telstar |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | Custom-Built |
| Instrument Type | Class III Biological Safety Cabinet |
| External Dimensions (L×W×H) | Customizable |
| Internal Dimensions (L×W×H) | Customizable |
| Filter Efficiency (HEPA/ULPA) | ≥99.999% at 0.12 µm |
| Brand | LOGAN |
|---|---|
| Origin | USA |
| Model | HDT-400L |
| Compliance | USP <1217>, ChP 0931, EP 2.9.8 |
| Measurement Range | 0–400 N (adjustable in 0.1 N increments) |
| Resolution | 0.1 N |
| Thickness Range | 1–25 mm |
| Diameter Range | 3–25 mm |
| Display | High-contrast LED |
| Output | RS-232 interface for printer or PC |
| Calibration | Internal reference load cell with NIST-traceable calibration certificate included |
| Power | 100–240 VAC, 50/60 Hz |
| Brand | Xepics |
|---|---|
| Origin | Italy |
| Model | HVB |
| Voltage Range | Up to 30 kV |
| Liquid Conductivity Detection Limit | ≥1 µS/cm |
| Sample Throughput | 120 containers/min |
| Compatible Containers | Vials, Ampoules, Prefilled Syringes, IV Bags, Blow-Fill-Seal (BFS) & Form-Fill-Seal (FFS) containers |
| Dimensions (W×D×H) | 190 × 85 × 127 cm |
| Power Supply | 110–240 VAC, 50–60 Hz, 2 kW |
| Control System | Windows 10 PC with 8" Touchscreen Interface |
| Communication | Ethernet |
| Compliance | Designed to support USP <1207>, ISO 11607-2, ASTM F2338, and FDA 21 CFR Part 11 data integrity requirements |
| Brand | KEYENCE |
|---|---|
| Origin | Japan |
| Product Type | Clamp-on Ultrasonic Liquid Flowmeter System |
| Model | FD-XS8 Sensor Head / FD-XA1 Controller / FD-XC8R2 Clamp Assembly |
| Flow Range (Ø6.35 mm) | 0–3000 mL/min |
| Flow Range (Ø8 mm) | 0–8000 mL/min |
| Zero-Cut Flow | 40 mL/min (adjustable) |
| Display Resolution (Instantaneous Flow) | 0.1 / 1 / 10 mL/min |
| Display Resolution (Totalized Flow) | 0.001 / 0.01 / 0.1 / 1 mL |
| Repeatability (Resin Pipe, 50 ms response) | ±0.1 % FS or ±3 mL/min (Ø6.35 mm), ±8 mL/min (Ø8 mm) |
| Repeatability (Metal Pipe, 50 ms response) | ±0.3 % FS (Ø6.35 mm), ±0.15 % FS (Ø8 mm) |
| Response Time | Adjustable (50 ms to 500 ms) |
| Environmental Rating | IP65/IP67 (IEC 60529), IP68G (JIS C0920) |
| Operating Temperature | −10 °C to +60 °C |
| Humidity | 35–85 % RH (non-condensing) |
| Housing Material | PPS/PPSU (sensor head), SUS304/SUSXM7 (metal clamp), FKM rubber (sealing surfaces) |
| Weight | Approx. 250 g |
| Brand | Liebherr |
|---|---|
| Origin | Germany |
| Model | LKUv 1613 MediLine |
| Storage Temperature Range | +3 °C to +16 °C |
| Power Consumption | 130 W |
| External Dimensions (D×W×H) | 61.8 × 60.1 × 82 cm |
| Net Weight | 43 kg |
| Net Refrigerated Volume | 132 L |
| Refrigerant | R600a |
| Noise Level | 47 dB(A) |
| Cooling System | Forced-air with dynamic auto-defrost |
| Control Interface | External digital LED display with keypad |
| Alarm System | Visual & audible power failure and fault alerts |
| Door | Insulated glass, right-hinged, self-closing, ergonomic handle |
| Interior | White coated steel walls, 4 adjustable plastic-coated wire shelves (3 height-adjustable), LED top lighting |
| Compliance | Designed for GLP-compliant environments |
Show next