- All
- Favorite
- Popular
- Most rated
| Brand | Allied |
|---|---|
| Origin | USA |
| Model | X-PREP® VISION™ |
| Measurement Principle | Infrared Reflectance Interferometry (with optional visible-light spectrometry) |
| Thickness Range | 10 µm – 1 mm (standard) |
| Stage Travel | 100 mm × 100 mm (X/Y) |
| Auto-Focus Z-Axis | Motorized, <1 s acquisition time per point |
| Measurement Modes | Single-point or multipoint grid scan |
| Edge & Corner Detection | Automatic, with theta correction and X/Y-defined edge exclusion |
| Software Platform | Allied X-Correct™ (proprietary), .NET extensible |
| Data Export | Native Windows-compatible formats (CSV, BMP, TIFF, XML) |
| Camera Requirement | CCD camera (#15-50020) required unless #15-51000 Spectrometer is installed |
| Surface Roughness Tolerance | ≤15 µm Ra |
| Physical Dimensions | 355 mm (W) × 431 mm (D) × 483 mm (H) |
| Warranty | 12 months limited |
| Brand | Allied |
|---|---|
| Origin | USA |
| Model | MetPrep 1™ |
| Dimensions (L×W×H) | 15" W × 26" D × 20" H (381 × 660 × 508 mm) |
| Number of Platen | 1 |
| Platen Diameter | 8" (203 mm) |
| Speed Range | 5–350 RPM (in 5 RPM increments) |
| Motor Power | 0.5 HP (375 W) |
| Platen Runout | < 5 µm |
| Control Interface | Touch-button digital panel |
| Coolant Delivery | Solenoid-actuated valve with manual flow control |
| Construction | Aluminum and steel frame |
| Rotation Direction | Bidirectional (CW/CCW) |
| Voltage | 100–240 V AC |
| Brand | Allied |
|---|---|
| Origin | USA |
| Model | M-Prep 5™ |
| Dimensions (L×W×D) | 15" W × 26" D × 20" H (381 × 660 × 508 mm) |
| Number of Platen | 1 |
| Platen Diameter | 8" (203 mm) |
| Speed Range | 5–350 RPM (5 RPM increments) |
| Motor | 0.5 HP (370 W) DC, high-torque |
| Voltage | 100–240 V AC, 50/60 Hz |
| Weight | 66 lb (30 kg) |
| Brand | Allied |
|---|---|
| Origin | USA |
| Distributor Type | Authorized Distributor |
| Import Status | Imported |
| Model Variants | 69-42000 (with Low-Profile Micrometer), 69-42005 (with Non-Rotating Micrometer) |
| Kit Components | #15-1010 Cross-Section Flat Plate w/ 3.1 mm Removable SEM Pin, #15-1013 TEM/FIB Thinning Flat Plate (w/ Two Heat-Resistant Glass Inserts), #15-1017 Heating/Embedding Shaft, #69-40037 Delrin® Feet for #15-2218 Micrometer (Pk/3), #71-10040 Hot-Mounting Wax, #71-40045 Loctite 460T Sample Adhesive (20 g), #69-40050 Glass Leveling Shims (Pk/5), #71-10000 EpoxyBond 110™ Epoxy Adhesive (0.5 oz), Storage Case |
| Construction | Anodized Aluminum Frame |
| Mounting Flexibility | Dual-Side Cam-Lock Lever Installation |
| Ergonomics | Low-Profile Handle Compatible with Most SEM Viewing Configurations |
| Compatibility | Designed for TEM wedge polishing, FIB pre-thinning, and cross-sectional specimen preparation |
| Brand | Allied |
|---|---|
| Origin | USA |
| Distributor Type | General Distributor |
| Import Status | Imported |
| Model | 69-50000 Series |
| Price Range | USD $150–$7,500 (FOB) |
| Construction | Electroplated Aluminum |
| Cam-Lock Mechanism | Dual-Side Mountable |
| SEM-Compatible Accessories | Removable 3.1 mm Pin Mounts |
| Included Consumables | EpoxyBond 110™ Adhesive (2 oz), Hot-Mounting Wax, 18 mm² Glass Coverslips (160/pk), PTFE Feet (2/pk), Hex Wrench (3/32"), Rubber Spatula (2" × 3"), Micro-Cleaning Soap (2 oz), Storage Case |
| Brand | Allied |
|---|---|
| Origin | USA |
| Model | OptiPrep™ |
| Platen Speed | 5–350 RPM (5-RPM increments) |
| Z-Axis Resolution | 1 µm |
| Platen Dimensions | Not specified |
| Number of Platens | Not specified |
| Motor | 0.25 HP (190 W) DC with gear-reduced high-torque output |
| Oscillation Sweep | Adjustable, 6 speeds |
| Sample Rotation Modes | Full or limited automatic, 8 speeds |
| Fixture Interface | Tool-less cam-lock |
| Compliance | CE |
| Warranty | 2 years |
| Dimensions (W×D×H) | 381 × 660 × 508 mm |
| Weight | 43 kg |
| Shipping Dimensions | 838 × 787 × 381 mm |
| Shipping Weight | 57 kg |
| Brand | Allied |
|---|---|
| Origin | USA |
| Model | TwinPrep 5™ |
| Dimensions (L×W×D) | 31" W × 26" D × 9.5" H (780 × 660 × 240 mm) |
| Weight | 136 lb (62 kg) |
| Disk Quantity | 2 independent disks |
| Disk Diameter Options | 8" (203 mm) or 10" (254 mm) |
| Speed Range | 10–500 RPM (adjustable in 10-RPM increments) |
| Motor | Dual 370-W high-torque DC motors |
| Voltage | 100–240 V AC, 50/60 Hz |
| Cooling | Independent, adjustable fluid delivery per disk |
| Construction | Corrosion-resistant aluminum and stainless steel frame |
| Compliance | Designed and manufactured in the USA per ISO 9001-aligned production standards |
| Brand | Allied |
|---|---|
| Origin | USA |
| Model | ID-5x™ |
| Dimensions (L×W×D) | 203 × 635 × 228 mm |
| Weight | 13 kg |
| Power Supply | 100–240 V AC |
| Dispensing Channels | 5 |
| Reservoir Capacity | 500 mL per channel |
| Pulse Duration | 0.5–6.0 s (adjustable in 0.5 s increments) |
| Pulse Frequency | 1–10 pulses/min |
| Programmable Menus | Up to 25 |
| Display | 4-line backlit LCD |
| Enclosure | Corrosion-resistant and impact-resistant housing |
| Compliance | Designed and manufactured in the USA per ISO 9001-aligned production protocols |
| Brand | Allied |
|---|---|
| Origin | USA |
| Model | MetPrep 4™ |
| Dimensions (L×W×D) | 610 × 711 × 610 mm |
| Motor Power | 0.5 hp (375 W) |
| Control | Microprocessor-based with 25 programmable protocols |
| Grinding Head Options | PH-4™ (up to 9 samples) or PH-6™ (up to 12 samples) |
| Force Application | Pneumatic-electronic, ring-load or point-load mode |
| Sample Rotation Speed | 0–150 rpm (10 rpm increments) |
| Platen Rotation | Bidirectional, variable speed |
| Timing Range | 0–120 min (15-sec resolution) |
| Safety | Interlocked corrosion-resistant shield, emergency stop, LED-backlit LCD interface |
| Brand | Allied |
|---|---|
| Origin | USA |
| Model | X-PREP® |
| Dimensions (L×W×H) | 533 mm × 686 mm × 622 mm |
| Grinding/Polishing Disc Diameter | 305 mm (12") |
| Motorized Tilt Stage Resolution | 0.5 µm |
| Closed-Loop Z-Axis Positioning Resolution | 0.1 µm, Accuracy: ±1 µm |
| Closed-Loop X/Y-Axis Positioning Resolution | 1 µm |
| Z-Force Control Range | 0.5–10 N |
| Milling Region | 100 mm × 100 mm |
| Tool Collet | Universal 3 mm shank (tool length: 38 mm), compatible with tips from 0.25 mm to 12 mm diameter |
| Weight | 84 kg |
| Warranty | 2 years |
| Brand | Allied |
|---|---|
| Origin | USA |
| Model | MetPrep 4x™ |
| Dimensions (L×W×D) | 610 × 711 × 610 mm |
| Platen Count | 1 |
| Platen Size | 610 × 711 × 610 mm |
| Speed Range | 0–150 RPM (in 10-RPM increments) |
| Motor Power | 375 W (0.5 HP) |
| Programmable Methods | 25 |
| Time Range | 0–120 min (in 15-sec increments) |
| Compliance | Designed and manufactured in the USA per ASTM E3, ISO 14971, and GLP-aligned engineering practices |
| Brand | Allied |
|---|---|
| Origin | USA |
| Model | MetPrep 3x™ |
| Dimensions (L×W×D) | 381 × 686 × 584 mm |
| Grinding Platen Count | 1 |
| Motor Power | 375 W (½ HP) |
| Weight | 67 kg |
| Voltage | 100–240 V AC |
| Programmable Programs | 25 |
| Grinding Time Range | 0–120 min (15-sec increments) |
| Platen Speed | Adjustable in 10-RPM increments |
| Light-Push Speed | Adjustable in 10-RPM increments |
| Platen Rotation | Bidirectional (clockwise/counterclockwise) |
| PH-3™ Head Torque Motor | 190 W (¼ HP), 0–150 RPM (10-RPM steps) |
| Sample Capacity | Up to 6 specimens (with compatible PH-3™/PH-4™/PH-6™ heads) |
| Cooling | Electronically controlled valve-regulated system |
| Display | Backlit LCD with touch keypad interface |
| Safety | Interlocked corrosion- and impact-resistant shield, emergency stop switch |
| Brand | Allied |
|---|---|
| Origin | USA |
| Model | E-PREP 4™ |
| Platen Speeds | 150 / 300 / 600 rpm |
| PH-4i Sample Rotation Speeds | 50 / 100 / 150 rpm |
| Cycle Time Range | 30 s – 9 min (1 min increments) |
| Sample Force Range | 0–12 lb (0–60 N) in 1 lb (~5 N) increments |
| Motor | 0.5 HP DC (E-PREP 4™ base), 0.25 HP geared motor (PH-4i power head) |
| Construction | RIM-molded housing, anodized aluminum, stainless steel |
| Warranty | 2 years |
| Brand | Allied |
|---|---|
| Origin | USA |
| Model | MultiPrep™ |
| Dimensions (L×W×D) | 15" W × 26" D × 20" H (381 × 660 × 508 mm) |
| Platen Count | 1 |
| Platen Diameter | 8" (203 mm) |
| Speed Range | 5–350 RPM (5-RPM increments) |
| Z-Axis Resolution | 1 µm |
| Tilt & Swing Adjustment | ±10° / −2.5°, 0.02° increments |
| Sample Load Range | 0–600 g (100-g increments) |
| Motor | 0.5 HP (375 W), high-torque |
| Display | 7" LCD touchscreen with keypad input |
| Compliance | CE-marked |
| Warranty | 1 year |
Show next