Stirrer
Filter
Showing 481–510 of 789 results
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RO 5 |
| Stirrer Type | Magnetic Stirrer |
| Max. Stirring Volume per Position | 0.4 L (H₂O) |
| Speed Range | 0–1100 rpm |
| Operating Temperature Range | 5–40 °C |
| Stirring Points | 5 |
| Point Spacing | 90 mm |
| Speed Deviation per Position | ±5 % |
| Stir Bar Max. Length | 30 mm |
| Speed Control | Dial 1–10 |
| Workplate Material | Stainless Steel 1.4301 |
| Workplate Dimensions | 120 × 450 mm |
| Overall Dimensions | 122 × 65 × 552 mm |
| Weight | 2.3 kg |
| IP Rating | IP42 |
| Voltage | 230 / 115 V |
| Frequency | 50 / 60 Hz |
| Input Power | 10 W |
| Motor Input Power | 7.2 W |
| Motor Output Power | 1.8 W |
| Relative Humidity Limit | 80 % |
| Compliance | DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RO5 / RO10 / RO15 |
| Stirring Points | 5 / 10 / 15 |
| Max. Volume per Position (H₂O) | 0.4 L |
| Inter-Position Spacing | 90 mm |
| Speed Range | 0–1200 rpm |
| Stir Bar Max. Length | 30 mm |
| Display | Digital LED |
| Workplate Material | Stainless Steel 1.4301 (AISI 304) |
| Workplate Dimensions (W × D) | 120 × 470 mm / 190 × 470 mm / 280 × 470 mm |
| Overall Dimensions (W × D × H) | 122 × 570 × 60 mm / 190 × 570 × 60 mm / 280 × 570 × 60 mm |
| Weight | 3 kg / 5 kg / 7 kg |
| Input/Output Power | 7.2 / 1.8 W |
| Position Accuracy | ±0 % (fixed grid layout) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RT 10 |
| Stirring Positions | 10 |
| Position Spacing | 90 mm |
| Speed Range | 0–1000 rpm |
| Speed Resolution | 10 rpm steps |
| Speed Stability | ±0% deviation per position under load |
| Max. Stirring Volume (H₂O) | 0.4 L per position |
| Stir Bar Length Compatibility | 25–30 mm |
| Heating Power Output | 375 W |
| Heating Temperature Range | Ambient to 120 °C |
| Heating Rate | 3 K/min |
| Adjustable Safety Temperature Limit | 50–150 °C |
| Plate Material | Anodized Aluminum |
| Plate Dimensions | 180 × 495 mm |
| Device Dimensions (W×H×D) | 190 × 60 × 610 mm |
| Weight | 7.5 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Ingress Protection | IP 40 (DIN EN 60529) |
| Electrical Supply | 230 V, 50/60 Hz |
| Total Input Power | 410 W |
| Control Interface | Touch-sensitive keypad with LED display |
| Operation Modes | Forward/Reverse, Eco Mode, Auto-Low-Temp Preheat, Error Code Indication |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Heating Magnetic Stirrer |
| Model | RT 10 |
| Maximum Stirring Volume per Position | 4 L |
| Speed Range | 0–1000 rpm |
| Temperature Control Range | Ambient to 120 °C |
| Heating Power | 375 W |
| Plate Material | Anodized Aluminum |
| Dimensions (W × H × D) | 190 × 60 × 610 mm |
| Weight | 7.5 kg |
| IP Rating | IP40 |
| Power Supply | 230 / 115 / 100 V, 50/60 Hz |
| Safety Temperature Limit | Adjustable from 50 to 150 °C |
| Heating Rate | ~3 K/min |
| Stirring Points | 10 (90 mm spacing) |
| Speed Resolution | 10 rpm increments |
| Minimum Stir Bar Length | 25 mm |
| Maximum Stir Bar Length | 30 mm |
| Operating Environment | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RT 10 |
| Instrument Type | Magnetic Stirrer |
| Max. Stirring Volume (H₂O) | 0.4 L |
| Speed Range | 0–1000 rpm |
| Speed Increment | 10 rpm |
| Heating Plate Temp. Range | Ambient to 120 °C |
| Sample Temp. Range | 5–70 °C (dependent on vessel geometry and thermal coupling) |
| Heating Power | 375 W |
| Safety Temp. Limit Adjustable | 50–150 °C |
| Stirring Points | 10 |
| Inter-point Spacing | 90 mm |
| Stir Bar Length Compatibility | 25–30 mm |
| Plate Material | Anodized Aluminum |
| Plate Dimensions | 180 × 495 mm |
| Overall Dimensions | 190 × 60 × 610 mm |
| Weight | 7.5 kg |
| IP Rating | IP40 |
| Input Voltage | 230 / 115 / 100 V, 50/60 Hz |
| Power Consumption | 410 W |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RT 15 |
| Speed Range | 0–1000 rpm (in 10 rpm increments) |
| Max. Stirring Volume (H₂O) | 0.4 L per position |
| Number of Stirring Positions | 15 |
| Position Spacing | 90 mm |
| Stirrer Bar Length Compatibility | 25–30 mm |
| Heating Power Output | 580 W |
| Heating Temperature Range | Ambient to 120 °C |
| Heating Rate | 3 K/min |
| Adjustable Safety Temperature Limit | 50–150 °C |
| Plate Material | Anodized Aluminum |
| Plate Dimensions | 270 × 495 mm |
| Overall Dimensions | 280 × 60 × 610 mm |
| Weight | 10.5 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Protection Class | IP 40 (DIN EN 60529) |
| Supply Voltage | 230 V, 50/60 Hz |
| Input Power | 620 W |
| Fuse | 1× T6.3A, 250 V |
| Control Interface | Touch-sensitive keypad with LED temperature display |
| Rotation Direction | Forward/reverse selectable |
| Operation Mode | Continuous duty cycle |
| Speed stability | ±0 % deviation under load variation |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Magnetic Stirrer |
| Model | RT 15 |
| Max. Stirring Volume | 4 L per position (15 positions) |
| Speed Range | 0–1000 rpm |
| Speed Increment | 10 rpm |
| Temp. Control Range | Ambient to 120 °C (heating plate) |
| Heating Power | 580 W |
| Plate Material | Anodized Aluminum |
| Plate Dimensions | 270 × 495 mm |
| Overall Dimensions | 280 × 60 × 610 mm |
| Weight | 10.5 kg |
| IP Rating | IP40 |
| Input Voltage | 230 / 115 / 100 V, 50/60 Hz |
| Safety Circuit Range | 50–150 °C |
| Temp. Ramp Rate | Adjustable up to 3 K/min |
| Operating Environment | 5–40 °C, ≤80 % RH |
| Stir Bar Length Compatibility | 25–30 mm |
| Inter-point Spacing | 90 mm |
| Speed Uniformity | ±0 % deviation across all 15 positions |
| Control Interface | Touch-sensitive keypad with LED display |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RT 5 |
| Speed Range | 0–1000 rpm (10 rpm increments) |
| Max. Stirring Volume (H₂O) | 0.4 L per position |
| Stir Bar Length Compatibility | 25–30 mm |
| Heating Power Output | 175 W |
| Heating Temperature Range | Ambient to 120 °C |
| Heating Rate | 3 K/min |
| Adjustable Safety Temperature Limit | 50–150 °C |
| Plate Material | Anodized Aluminum |
| Plate Dimensions | 110 × 495 mm |
| Overall Dimensions | 120 × 60 × 610 mm |
| Weight | 4 kg |
| Permissible Ambient Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP 40 (DIN EN 60529) |
| Voltage | 230 V, 50/60 Hz (optional 115 V / 100 V versions available) |
| Input Power | 200 W |
| Display | LED |
| Control Interface | Touch-sensitive buttons |
| Operation Modes | Forward/Reverse, Eco Mode, Auto-Low-Temp Preheat |
| Features | Error Code Display, Uniform Magnetic Field Distribution, Load-Independent Speed Stability, Homogeneous Plate Temperature Profile |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RT5 / RT10 / RT15 |
| Stirring Points | 5 / 10 / 15 |
| Max. Volume per Position (H₂O) | 0.4 L |
| Total Max. Volume (H₂O) | 4 L |
| Stirring Speed Range | 0–1100 rpm |
| Speed Deviation per Position | 0% |
| Max. Stir Bar Length | 30 mm |
| Heating Power | 175 W / 375 W / 580 W |
| Heating Temp. Range | Ambient to 120 °C |
| Medium Temp. Stability | ±2 K |
| Heating Control | Analog Scale 1–10 |
| Plate Material | Silicone Film-Coated Aluminum |
| Plate Dimensions (W × L) | 110 × 495 mm / 180 × 495 mm / 270 × 495 mm |
| Overall Dimensions (W × L × H) | 120 × 610 × 60 mm / 190 × 610 × 60 mm / 280 × 610 × 60 mm |
| Weight | 4 kg / 7.5 kg / 10.5 kg |
| Ambient Operating Temperature | 5–40 °C |
| Motor Input Power | 14.4 W |
| Motor Output Power | 3.6 W |
| Stirring Point Spacing | 90 mm |
| Max. Medium Temperature (in Vessel) | 70 °C |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 20 digital |
| Max. Stirring Volume (H₂O) | 20 L |
| Motor Input Power | 70 W |
| Motor Output Power | 35 W |
| Speed Range | 60–2000 rpm |
| Speed Display | LED |
| Max. Viscosity | 10,000 mPa·s |
| Max. Output Power at Stirring Shaft | 26 W |
| Continuous Duty Cycle | 100 % |
| Max. Torque at Shaft | 150 N·cm (at 100 rpm), 300 N·cm (overload at 60 rpm), 24 N·cm (at 1000 rpm) |
| Speed Control | Infinitely Variable |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±30 rpm |
| Clamp Type | Fixed Chuck |
| Clamp Jaw Range | 0.5–10 mm |
| Hollow Stirring Shaft ID | 10.5 mm |
| Hollow Shaft Insertion (stationary) | Yes |
| Support Arm Diameter | 13 mm |
| Support Arm Length | 160 mm |
| Rated Torque | 1.5 N·m |
| Dimensions (W×H×D) | 88 × 294 × 212 mm |
| Weight | 3.1 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Class | IP20 per DIN EN 60529 |
| Voltage | 220–240 V |
| Frequency | 50/60 Hz |
| Instrument Input Power | 72 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | RW 20 digital |
| Motor Input Power | 70 W |
| Motor Output Power | 35 W |
| Max. Stirring Volume (H₂O) | 20 L |
| Speed Range | 60–2000 rpm |
| Speed Display | LED |
| Speed Control | Stepless Mechanical |
| Max. Viscosity | 10,000 mPa·s |
| Max. Torque (at 60 rpm) | 300 N·cm |
| Max. Torque (at 100 rpm) | 150 N·cm |
| Max. Torque (at 1000 rpm) | 24 N·cm |
| Shaft Output Power | 26 W |
| Duty Cycle | 100 % |
| Shaft Clamp Range | Ø 0.5–10 mm |
| Hollow Shaft ID | 10.5 mm |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Dimensions (W×H×D) | 88 × 294 × 212 mm |
| Weight | 3.1 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Class | IP20 |
| Voltage | 220–240 V / 100–115 V |
| Frequency | 50/60 Hz |
| Rated Torque | 1.5 N·m |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 20 digital |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 20 L |
| Speed Range | 60–2000 rpm |
| Input Power | 72 W |
| Output Power | 35 W |
| Max. Torque | 150 N·cm (at 100 rpm), 300 N·cm (overload at 60 rpm) |
| Display | LED |
| Speed Control | Stepless Mechanical |
| Shaft Clamp Range | 0.5–10 mm |
| Hollow Shaft ID | 10.5 mm |
| IP Rating | IP20 |
| Dimensions (W×H×D) | 88 × 294 × 212 mm |
| Weight | 3.1 kg |
| Ambient Temp. | 5–40 °C |
| Relative Humidity | ≤80 % |
| Voltage | 220–240 V / 100–115 V |
| Frequency | 50/60 Hz |
| Max. Viscosity | 10,000 mPa·s |
| Continuous Duty Cycle | 100 % |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 20 digital |
| Max. Viscosity | 10,000 mPa·s |
| Max. Volume (Water) | 20 L |
| Speed Range | 60–2000 rpm |
| Motor Input/Output Power | 70 / 35 W |
| Shaft Output Power | 26 W |
| Duty Cycle | 100% |
| Max. Torque at 100 rpm | 150 N·cm |
| Chuck Capacity | 0.5–10 mm |
| Support Rod | Ø13 × 160 mm |
| Dimensions (W×D×H) | 88 × 212 × 294 mm |
| Weight | 3.1 kg |
| Protection Class | IP20 (DIN EN 60529) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 28 digital |
| Maximum Stirring Volume | 80 L (H₂O) |
| Speed Range | 60–1400 rpm |
| Temperature Control Range | 5–40 °C |
| Motor Input Power | 220 W |
| Motor Output Power | 90 W |
| Max. Torque | 900 N·cm (at 60 rpm), 1144 N·cm (overload at 100 rpm) |
| Max. Viscosity | 50,000 mPa·s |
| Speed Display | LED |
| Speed Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±10 rpm |
| Clamp Shaft Diameter Range | 1–10 mm |
| Hollow Shaft Inner Diameter | 10.5 mm |
| Dimensions | 123 × 364 × 252 mm |
| Weight | 7.5 kg |
| IP Rating | IP40 |
| Noise Level | 62.5 dB(A) |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Voltage | 220–240 V / 115 V / 100 V, 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 28 digital |
| Max. Stirring Volume (H₂O) | 80 L |
| Motor Input Power | 220 W |
| Motor Output Power | 90 W |
| Speed Range | 60–1400 rpm (LED digital display) |
| Max. Viscosity | 50,000 mPa·s |
| Max. Torque | 900 N·cm (at 100 rpm), 1144 N·cm (overload at 60 rpm), 86 N·cm (at 1000 rpm) |
| Dual-Speed Ranges (50 Hz) | I: 60–400 rpm, II: 240–1400 rpm |
| Dual-Speed Ranges (60 Hz) | I: 72–480 rpm, II: 288–1680 rpm |
| Speed Control | Continuous, mechanical |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±10 rpm |
| Chuck Type | Fixed collet |
| Clamp Range | Ø1–10 mm |
| Hollow Shaft | Ø10.5 mm (allows insertion of probes/thermometers in stopped state) |
| Extension Arm | Ø16 mm × 145 mm |
| Rated Torque | 9 N·m |
| Housing Material | Cast aluminum with thermoplastic polymer coating |
| Noise Level (no disperser) | 62.5 dB(A) |
| Dimensions (W×H×D) | 123 × 364 × 252 mm |
| Weight | 7.5 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % RH |
| Ingress Protection | IP40 (DIN EN 60529) |
| Voltage | 220–240 V AC |
| Frequency | 50/60 Hz |
| Input Power | 220 W |
| Thermal Cut-off | Integrated motor overheat protection |
| Safety Features | Overload detection, error code display, ergonomic design, quiet operation, constant torque transmission |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | RW 28 digital |
| Instrument Type | Electric Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 80 L |
| Speed Range | 60 – 1400 rpm |
| Input Power | 220 W |
| Output Power | 90 W |
| Max. Torque | 900 N·cm (at 100 rpm) / 1144 N·cm (overload at 60 rpm) |
| Max. Viscosity | 50,000 mPa·s |
| Speed Display | LED |
| Speed Control | Continuously Variable Mechanical |
| Protection Class | IP 40 |
| Noise Level | 62.5 dB(A) |
| Dimensions (W × H × D) | 123 × 364 × 252 mm |
| Weight | 8.966 kg |
| Ambient Operating Conditions | 5 – 40 °C, ≤80 % RH |
| Compliance | DIN EN 60529, CE, RoHS |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Digital Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 80 L |
| Speed Range | 60–1400 rpm |
| Motor Output Power | 90 W |
| Max. Torque (at 60 rpm) | 1144 N·cm |
| Speed Control | Stepless Mechanical |
| Display | LED |
| Protection Class | IP 40 |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Noise Level (no dispersing tool) | 62.5 dB(A) |
| Dimensions (W×H×D) | 123 × 364 × 252 mm |
| Weight | 8.966 kg |
| Input Voltage | 220–240 V / 115 V / 100 V, 50/60 Hz |
| Motor Input Power | 220 W |
| Max. Viscosity | 50,000 mPa·s |
| Shaft Clamping Range | Ø1–10 mm |
| Hollow Shaft ID | 10.5 mm |
| Max. Continuous Duty Cycle | 100 % |
| Thermal Protection | Integrated Motor Overheat Limiter |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 28 digital |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 80 L |
| Speed Range | 60–400 rpm (Range I, 50 Hz) / 240–1400 rpm (Range II, 50 Hz) |
| Temperature Operating Range | 5–40 °C |
| Motor Output Power | 90 W |
| Max. Torque | 900 N·cm (Range I) / 300 N·cm (Range II) |
| Shaft Clamp Capacity | 1–10 mm |
| IP Rating | IP40 |
| Noise Level | 62.5 dB(A) |
| Dimensions (W×H×D) | 123 × 364 × 252 mm |
| Weight | 7.5 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 47 digital |
| Maximum Stirring Volume | 200 L (H₂O) |
| Speed Range | 57–1300 rpm |
| Speed Control | Continuously Variable, Dual-Speed Range (Range I: 57–275 rpm |
| Range II | 275–1300 rpm) |
| Speed Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±10 rpm |
| Max. Torque (at 60 rpm) | 4642 N·cm |
| Rated Torque | 30 N·m |
| Max. Viscosity | 100,000 mPa·s |
| Motor Input Power | 513 W |
| Motor Output Power | 370 W |
| Stirring Shaft Output Power | 300 W |
| Duty Cycle | 100% continuous operation |
| Clamp Jaw Range | 3–16 mm |
| Hollow Shaft Inner Diameter | 13 mm |
| Housing Material | Cast Aluminum with Thermoplastic Coating |
| IP Rating | IP54 |
| Dimensions (W×H×D) | 145 × 465 × 358 mm |
| Weight | 16 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Power Supply | 3 × 400 V / 3 × 230 V, 50 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 47 digital |
| Max. Mixing Volume (H₂O) | 200 L |
| Input Power | 511 W |
| Output Power | 370 W |
| Motor Principle | Three-phase AC |
| Speed Display | LED |
| Speed Range | 57–1300 rpm |
| Max. Viscosity | 100,000 mPa·s |
| Max. Shaft Output Power | 300 W |
| Duty Cycle | 100 % continuous operation |
| Max. Torque (60 rpm) | 4642 N·cm |
| Max. Torque (100 rpm) | 3000 N·cm |
| Max. Torque (1000 rpm) | 285 N·cm |
| Torque Range I | 3000 N·cm |
| Torque Range II | 620 N·cm |
| Speed Range I (50 Hz) | 57–275 rpm |
| Speed Range II (50 Hz) | 275–1300 rpm |
| Speed Control | Continuously variable |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±10 rpm |
| Impeller Mounting | Fixed chuck |
| Chuck Capacity | Ø 3–16 mm |
| Hollow Shaft ID | 13 mm |
| Mounting | Flange |
| Speed Control Type | Mechanical |
| Rated Torque | 30 N·m |
| Housing Material | Cast aluminum with thermoplastic polymer coating |
| Dimensions (W×H×D) | 145 × 478 × 358 mm |
| Weight | 16.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 per DIN EN 60529 |
| Voltage | 3 × 400 V |
| Frequency | 50 Hz |
| Instrument Input Power | 513 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Digital Overhead Mechanical Stirrer |
| Max. Mixing Volume (H₂O) | 200 L |
| Speed Range | 57–1300 rpm |
| Motor Output Power | 370 W |
| Max. Torque (at 60 rpm) | 4642 N·cm |
| Max. Viscosity | 100,000 mPa·s |
| IP Rating | IP54 |
| Input Voltage | 3 × 400 V / 3 × 230 V, 50 Hz |
| Dimensions (W×H×D) | 145 × 465 × 358 mm |
| Weight | 16 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW11 Basic |
| Stirring Volume (H₂O) | 2 L |
| Speed Range | 0–2000 rpm |
| Max. Viscosity | 100 mPa·s |
| Motor Input/Output Power | 8 / 1 W |
| Stirring Shaft Output Power | 1 W |
| Operating Mode | Continuous |
| Max. Chuck Torque | 0.8 N·cm |
| Shaft Clamp Inner Diameter | 4 mm |
| Integrated Support Sleeve Inner Diameter | 10 mm |
| Dimensions (W×D×H) | 86 × 175 × 89 mm |
| Weight | 0.39 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class (DIN EN 60529) | IP42 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW16 Basic |
| Max. Volume (H₂O) | 10 L |
| Speed Range | 40–1200 rpm |
| Input Power | 75 W |
| Output Power | 55 W |
| Max. Viscosity | 10,000 mPa·s |
| Max. Shaft Output Power | 53 W |
| Max. Torque | 40 N·cm |
| Torque at 60 rpm | 50 N·cm |
| Torque at 100 rpm | 48 N·cm |
| Torque at 1000 rpm | 34 N·cm |
| Chuck Range | 0.5–10 mm |
| Hollow Shaft ID | 11 mm |
| Delay Arm | Ø13 mm × 160 mm |
| Rated Torque | 0.4 N·m |
| Dimensions (W×H×D) | 80 × 222 × 190 mm |
| Weight | 2.8 kg |
| Ambient Temp. | 5–40 °C |
| Relative Humidity | ≤80 % |
| IP Rating | IP42 |
| Display | Analog Scale |
| Drive Type | Gearless Continuous Speed Control |
| Safety Features | Thermal Cut-off, Electronic Overload Protection, Safe Circuit Interruption |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW20 Digital |
| Motor Input Power | 70 W |
| Motor Output Power | 35 W |
| Stirring Shaft Output Power | 26 W |
| Speed Range | 60–2000 rpm (continuously adjustable) |
| Max. Torque | 150 N·cm (at 100 rpm), 300 N·cm (overload at 60 rpm) |
| Max. Viscosity | 10,000 mPa·s |
| Max. Volume (H₂O) | 20 L |
| Clamp Range | 0.5–10 mm |
| Hollow Shaft ID | 10.5 mm |
| Dimensions (W×H×D) | 88 × 294 × 212 mm |
| Weight | 3.1 kg |
| Ambient Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| Protection Class | IP20 |
| Voltage | 220–240 V / 100–115 V |
| Frequency | 50/60 Hz |
| Rated Torque | 1.5 N·m |
| Continuous Duty Cycle | 100 % |
| LED Speed Display | Yes |
| Chuck Type | Rotatable Chuck |
| Extension Arm | 160 mm (Ø13 mm) |
| Housing Material | Robust polymer with metal-reinforced base |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 20 Digital |
| Max. Mixing Volume | 20 L |
| Speed Range | 60–2000 rpm (two ranges: 60–500 rpm / 240–2000 rpm) |
| Viscosity Range | up to 10,000 mPa·s |
| Motor Input/Output Power | 70 W / 35 W |
| Shaft Output Power | 26 W |
| Duty Cycle | 100% |
| Chuck Torque at 100 rpm | 150 N·cm |
| Chuck Capacity | 0.5–10 mm |
| Support Rod Diameter/Length | 13 mm / 160 mm |
| Dimensions (W×D×H) | 88 × 212 × 294 mm |
| Weight | 3.1 kg |
| Protection Class | IP20 (DIN EN 60529) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW28 Basic |
| Max. Viscosity | 50,000 mPa·s |
| Speed Range | 60–1400 rpm (two ranges, continuously adjustable) |
| Max. Volume (H₂O) | 80 L |
| Motor Output Power | 90 W |
| Max. Torque | 900 N·cm (at 100 rpm), 1144 N·cm (overload at 60 rpm) |
| Shaft Output Power | 90 W |
| Duty Cycle | 100% continuous operation |
| Clamp Range | 1–10 mm |
| Hollow Shaft ID | 10.5 mm |
| IP Rating | IP42 |
| Dimensions (W×H×D) | 123 × 364 × 252 mm |
| Weight | 7.4 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Voltage | 100–240 V, 50/60 Hz |
| Input Power | 220 W |
| Shaft Fixation | Chuck |
| Support | Adjustable extension arm (Ø16 mm, 145 mm length) |
| Display | Analog speed scale |
| Compliance | DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW47 Digital Display |
| Input Power | 513 W |
| Output Power | 370 W |
| Stirring Shaft Output Power | 300 W |
| Speed Range | 57–1300 rpm (continuously adjustable, two speed ranges: I = 57–275 rpm, II = 275–1300 rpm) |
| Max. Viscosity | 100,000 mPa·s |
| Max. Torque | 3000 N·cm (at 100 rpm), 4642 N·cm (overload at 60 rpm), 285 N·cm (at 1000 rpm) |
| Max. Stirring Volume (H₂O) | 200 L |
| Chuck Capacity | 3–16 mm |
| Hollow Shaft ID | 13 mm |
| Duty Cycle | 100 % continuous operation |
| Protection Rating | IP54 (DIN EN 60529) |
| Dimensions (W × H × D) | 145 × 445 × 340 mm |
| Weight | 15 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Voltage | 3 × 400 V / 3 × 230 V, 50 Hz |
| Clamp Mounting | Flange |
| Speed Indication | Digital display |
| Torque Display | Not available |
| RS232 Interface | Not available |
| Analog Output | Not available |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Magnetic Stirrer with Integrated Heating Plate |
| Max. Stirring Volume | 20 L (H₂O) |
| Speed Range | 50 – 1500 rpm |
| Temperature Control Range | Ambient + Self-Heating of Plate – 310 °C |
| Heating Power | 600 W |
| Plate Material | Anodized Aluminum |
| Plate Diameter | Ø 135 mm |
| Dimensions (W × H × D) | 160 × 270 × 85 mm |
| Weight | 2.4 kg |
| IP Rating | IP42 |
| Interface | RS232, USB-B |
| Compliance | DIN EN 60529, CE, RoHS |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | T 65 digital ULTRA-TURRAX® Package |
| Maximum Mixing Volume | 2–50 L (H₂O) |
| Speed Range | 1,000–9,500 rpm |
| Motor Input Power | 2,600 W |
| Motor Output Power | 2,200 W |
| Speed Accuracy | ±3 % |
| Protection Rating | IP 54 |
| Dimensions (W × D × H) | 300 × 390 × 400 mm |
| Weight | 30 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Max. Viscosity | 5,000 mPa·s |
| Noise Level (no dispersing tool) | 75 dB(A) |
| Speed Control | Continuous (infinitely variable) |
| Display | LED, 7-segment |
| Direction | Reversible |
| Enclosure Standard | DIN EN 60529 |
| Voltage | 3 × 400 V / 3 × 230 V |
| Frequency | 50/60 Hz |
| Process Type | Batch |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | topolino mobil |
| Max. Stirring Volume (H2O) | 0.25 L |
| Speed Range | 500–1800 rpm |
| Max. Stir Bar Length | 30 mm |
| Plate Material | Polypropylene (PP) |
| Plate Diameter | Ø 80 mm |
| Battery Operation | Yes |
| Dimensions (W × H × D) | 140 × 42 × 140 mm |
| Weight | 0.747 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP20 (per DIN EN 60529) |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| DC Output | 9 V = |
| Current Consumption | 1000 mA |
| Operating Time | 8–12 h (typ.) |
| Charging Time | 2–3 h |
| Power Options | Rechargeable AA batteries (user-supplied), AC adapter (included), or hybrid mode (adapter + batteries) |