Temperature and Humidity Controlled Chamber
Filter
Showing 271–300 of 514 results
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Model | RP-80 |
| Temperature Range | -20°C to +150°C (optional: -40°C / -60°C / -80°C to +150°C) |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ≤ ±2.0°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Humidity Deviation | +2 / -3% RH |
| Heating Rate | -20°C → 100°C in ≈35 min |
| Cooling Rate | 25°C → -40°C in ≈50 min |
| Control Accuracy | ±0.1°C (temp), ±1% RH (humidity) |
| Display | 5.7″ Korean imported touchscreen controller with bilingual (EN/CN) interface |
| Programmable Capacity | 100 programs × 1000 segments × 999 cycles |
| Communication Interface | RS-232 / RS-485 |
| Refrigeration System | French “TECO” hermetic compressor |
| Humidification | Stainless steel surface evaporation type, external isolation structure |
| Dehumidification | Evaporator coil dew-point contact method |
| Air Circulation | Low-noise AC motor + multi-blade centrifugal impeller |
| Inner Chamber Material | SUS304 stainless steel mirror finish |
| Outer Chamber Material | Cold-rolled steel with phosphating & electrostatic powder coating or optional SUS304 brushed finish |
| Insulation | Rigid polyurethane foam + ultra-fine glass fiber |
| Compliance | GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.3–1993, GB/T 2423.4–1993 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | RP-80U |
| Quotation | Upon Request |
| Temperature Range | -60°C to +150°C |
| Humidity Range | 10%–98% RH (optional dehumidification to ≤5% RH) |
| Internal Dimensions (W×H×D) | 400×500×400 mm |
| Temperature Uniformity | ≤±2.0°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Heating Rate | -60°C → +150°C ≤ 60 min |
| Cooling Rate | +20°C → -60°C ≤ 75 min |
| Refrigeration System | Hermetic French Tecumseh Compressor |
| Refrigerant | HFC-based Eco-friendly Refrigerant |
| Control Interface | Programmable Touchscreen Controller with USB Data Logging |
| Communication | RS-232 / RS-485 (SCADA-compatible) |
| Construction | SUS304 Stainless Steel Interior & Exterior |
| Insulation | High-density Polyurethane Foam + Glass Fiber |
| Humidification | UL-shaped Stainless Steel Steam Generator |
| Air Circulation | Centrifugal Blower with Optimized Vane Design |
| Safety | Dual-stage Over-Temperature & Over-Humidity Protection, Auto-Cut-off Circuit |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | RP-80U |
| Temperature Range | –60°C to +150°C |
| Humidity Range | 10–98% RH (optional dehumidification to ≤5% RH) |
| Internal Dimensions (W×H×D) | 400×500×400 mm |
| Temperature Uniformity | ≤±2.0°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Heating Rate | –60°C → +150°C ≤ 60 min |
| Cooling Rate | +20°C → –60°C ≤ 75 min |
| Refrigerant | HFC-based eco-friendly refrigerant |
| Compressor | Imported hermetic reciprocating compressor (Tecumseh/France) |
| Control System | BTHC (Balanced Temperature & Humidity Control) |
| Data Storage | USB interface with real-time logging |
| Communication | RS-232/RS-485, SCADA-compatible |
| Construction | SUS304 stainless steel interior & exterior |
| Insulation | High-density polyurethane foam + fiberglass |
| Viewing Window | Heated embedded glass, fog-free |
| Water Supply | Front-mounted 18 L reservoir with auto-refill interface |
| Safety | Dual-stage over-temperature/humidity cut-off, leakage detection, circuit isolation |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RP-80U |
| Temperature Range | -60°C to +150°C |
| Humidity Range | 10–98% RH (down to ≤5% RH with optional dehumidification unit) |
| Internal Dimensions (W×H×D) | 400×500×400 mm |
| Temperature Uniformity | ≤±2.0°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Heating Rate | -60°C → +150°C ≤ 60 min |
| Cooling Rate | +20°C → -60°C ≤ 75 min |
| Refrigeration System | Hermetic French Tecumseh Compressor |
| Refrigerant | HFC-based eco-friendly refrigerant |
| Power Supply | 3-phase 380 VAC ±10%, 50/60 Hz |
| Control Interface | Programmable touchscreen controller with USB data export |
| Communication | RS-232 / RS-485 (SCADA-compatible) |
| Construction | SUS304 stainless steel interior & exterior |
| Insulation | High-density polyurethane foam + glass fiber |
| Humidification | UL-shaped stainless steel electric steam generator |
| Air Circulation | Centrifugal blower with optimized duct design |
| Safety | Dual-loop over-temperature/over-humidity protection, automatic power cutoff, door interlock |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RP-80U |
| Pricing | Upon Request |
| Temperature Range | –60°C to +150°C |
| Humidity Range | 10–98% RH (optional dehumidification to ≤5% RH) |
| Internal Dimensions (W×H×D) | 400×500×400 mm |
| Temperature Uniformity | ≤±2.0°C |
| Humidity Uniformity | ±2.5% RH |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | –60°C → +150°C ≤ 60 min |
| Cooling Rate | +20°C → –60°C ≤ 75 min |
| Refrigeration System | Hermetic French Tecumseh Compressor |
| Refrigerant | HFC-based Eco-friendly Refrigerant |
| Control System | BTHC Balanced Temperature & Humidity Control |
| Data Storage | USB Interface |
| Communication | RS-232 / RS-485 (SCADA-compatible) |
| Construction | SUS304 Stainless Steel Interior & Exterior |
| Insulation | High-density Polyurethane Foam + Glass Fiber |
| Viewing Window | Heated Embedded Glass |
| Water Tank Capacity | ~18 L |
| Safety | Multi-point Auto-Cut-off Protection, Circuit Isolation for Humidification System |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RP-80U |
| Temperature Range | –60°C to +150°C |
| Humidity Range | 10–98% RH (down to ≤5% RH with optional dehumidification system) |
| Internal Dimensions (W×H×D) | 400×500×400 mm |
| Temperature Uniformity | ≤±2.0°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Heating Rate | –60°C → +150°C ≤ 60 min |
| Cooling Rate | +20°C → –60°C ≤ 75 min |
| Refrigeration System | Hermetic French Tecumseh Compressor |
| Refrigerant | HFC-based eco-friendly refrigerant |
| Control Interface | Programmable BTHC (Balanced Temperature & Humidity Control) system with USB data logging |
| Compliance | Designed for GLP/GMP-aligned laboratory environments |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (OEM/ODM Producer) |
| Model | RZ-80 |
| Temperature Range | −20°C to +150°C |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | −20°C to 100°C in ≈35 min |
| Cooling Rate | +20°C to −20°C in ≈45 min |
| Humidity Range | 30–95% RH |
| Humidity Fluctuation | ±2.5% RH |
| Humidity Accuracy | ±3% RH (>50% RH), ±5% RH (≤50% RH) |
| Internal Dimensions (W×H×D) | 40×50×40 cm |
| External Dimensions (W×H×D) | 94×86×83 cm |
| Construction | SUS#304 Stainless Steel Interior & Exterior |
| Insulation | Rigid Polyurethane Foam |
| Refrigeration | Hermetic Compressor (Imported from EU/US), Eco-friendly Refrigerant (R134a or equivalent) |
| Control System | Korean-Made PID-Based Programmable Controller with LCD Interface, LAN Optional |
| Sensor | PT100 Platinum Resistance Thermometer |
| Compliance | Designed per IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78, and ASTM D4332 (Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RZ-80 |
| Pricing | Available Upon Request |
| Temperature Range | -20°C to +150°C |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | -20°C to 100°C in ~35 min |
| Cooling Rate | +20°C to -20°C in ~45 min |
| Humidity Range | 30–95% RH |
| Humidity Fluctuation | ±2.5% RH |
| Humidity Accuracy | ±3% RH (>50% RH), ±5% RH (≤50% RH) |
| Internal Dimensions (W×H×D) | 40×50×40 cm |
| External Dimensions (W×H×D) | 94×86×83 cm |
| Inner Chamber Material | SUS#304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam |
| Refrigeration System | Hermetic Compressor (Imported from Europe/America), Eco-friendly Refrigerant |
| Control System | Korean-Made PID-Based Programmable Controller with LCD Interface, LAN Optional |
| Sensor | PT100 Platinum Resistance Thermometer |
| Display Resolution | 0.1°C / 1% RH |
| Compliance | Designed for ISO/IEC 17025-aligned environmental testing workflows, supports GLP/GMP documentation readiness |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | RZ-80 |
| Temperature Range | -20°C to +150°C |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Range | 30–95% RH |
| Humidity Fluctuation | ±2.5% RH |
| Humidity Accuracy | ±3% RH (>50% RH), ±5% RH (≤50% RH) |
| Internal Dimensions (W×H×D) | 40×50×40 cm |
| External Dimensions (W×H×D) | 94×86×83 cm |
| Heating System | Finned-tube stainless steel heater |
| Humidification System | U-shaped immersion heater |
| Refrigeration System | Hermetic compressor with eco-friendly refrigerant (R134a or equivalent) |
| Control System | Korean-made PID-based programmable controller with LCD interface, LAN optional |
| Safety Features | Over-temperature protection, compressor high-pressure cutoff, power failure memory, auto-diagnostic function |
| Construction | SUS#304 stainless steel interior and exterior, rigid polyurethane foam insulation |
| Air Circulation | Long-shaft 90W stainless steel motor with multi-blade impeller |
| Viewing Window | Double-layer vacuum-insulated window (210×270×35 mm) |
| Lighting | 13W LED viewing lamp |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | RZ-80 |
| Pricing | Available Upon Request |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | RZ-80 |
| Temperature Range | −20 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±2 %RH (≥75 %RH) |
| Heating Rate | −20 °C to +100 °C in ~80 min |
| Cooling Rate | +20 °C to −20 °C in ~50 min |
| Internal Dimensions (W×H×D) | 500×600×500 mm |
| Controller | Q8-901 Color Touchscreen PLC-Based Programmable Controller (Bilingual English/Chinese Interface) |
| Compliance | GB 10586-89, GB 10592-89, IEC 60068-2-3, IEC 60068-2-1, IEC 60068-2-2, MIL-STD-810F, JIS C60068-2, JESD22-A101-B, GB/T 2423.1–2423.4, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SP-1000U |
| Pricing | Upon Request |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SP-120U |
| Internal Volume | 120 L |
| Internal Dimensions (W×H×D) | 500 × 600 × 400 mm |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 10 %RH to 98 %RH (with optional dehumidification module) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤ ±2.0 °C |
| Humidity Deviation | ±2.5 %RH |
| Heating Rate | −70 °C → +150 °C in ≤60 min (~3 °C/min) |
| Cooling Rate | +20 °C → −70 °C in ≤90 min (~1.2 °C/min) |
| Control System | ETAC820 Touchscreen PLC-based Controller (50 programs / 2500 segments) |
| Refrigerant | R507 (HFC, ozone-friendly) |
| Construction | SUS304 stainless steel interior & exterior with powder-coated cold-rolled steel option |
| Insulation | High-density polyurethane foam + glass fiber |
| Safety Protections | Dry-heater cutoff, independent over-temperature cutoff, low-water detection, compressor overload/overcurrent, high-pressure refrigerant switch, earth-leakage protection |
| Power Supply | AC220±10% V / 50±0.5 Hz (single-phase) or AC380±10% V / 50±0.5 Hz (three-phase) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SP-120U |
| Internal Volume | 120 L |
| Internal Dimensions (W×H×D) | 500 × 600 × 400 mm |
| Temperature Range | −70 to +150 °C |
| Humidity Range | 10–98% RH (with optional dehumidification module) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤ ±2.0 °C |
| Humidity Deviation | ±2.5% RH |
| Heating Rate | −70 → +150 °C in ≤60 min (~3 °C/min) |
| Cooling Rate | +20 → −70 °C in ≤90 min (~1.2 °C/min) |
| Refrigerant | R507 (HFC-based, ozone-safe) |
| Control System | ETAC820 Touchscreen PLC Controller (50 programs, 2500 segments) |
| Compliance | GB/T 10586, GB/T 10592, GB/T 2423.1/3/4/34, MIL-STD-810D, GJB 150.9, IEC 60068-2-3 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SP-120U |
| Internal Volume | 120 L |
| Internal Dimensions (W×H×D) | 500 × 600 × 400 mm |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 10 %RH to 98 %RH (with optional dehumidification module) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤ ±2.0 °C |
| Humidity Deviation | ±2.5 %RH |
| Heating Rate | −70 °C → +150 °C in ≤60 min (~3 °C/min) |
| Cooling Rate | +20 °C → −70 °C in ≤90 min (~1.2 °C/min) |
| Control System | ETAC820 Touchscreen PLC-Based Controller (50 programs, 2500 segments) |
| Refrigerant | R507 (HFC-based, ozone-safe) |
| Construction | SUS304 Stainless Steel Interior & Exterior |
| Insulation | High-Density Polyurethane Foam + Glass Fiber |
| Compressor | Imported Sealed Rotary Compressor (EU/US Origin) |
| Humidification | Stainless Steel UL-Type Steam Generator |
| Data Interface | LAN (SCADA/IPC-compatible), USB 2.0 Port |
| Safety Protections | Dry-run protection for humidifier, independent overtemperature cutoff, water shortage detection, compressor overcurrent/overpressure protection, earth leakage circuit breaker, thermal fuse |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SP-408 |
| Internal Volume | 408 L |
| Internal Dimensions (H×W×D) | 850×600×800 mm |
| External Dimensions (H×W×D) | 1100×1780×1250 mm |
| Temperature Range | −40 °C to +150 °C |
| Humidity Range | 20 %RH to 98 %RH |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±1.0 %RH |
| Heating Rate | −70 °C to +150 °C in <90 min |
| Cooling Rate | +20 °C to −40 °C in <60 min |
| Control Method | BTHC (Balanced Temperature and Humidity Control) |
| Sensor Type | PT100 Dry/Wet Bulb Sensors |
| Heating System | Nickel-Chromium Alloy Wire Heaters |
| Humidification System | Shallow-Tank Electric Heater Type |
| Refrigeration System | Hermetic Twin-Screw Compressor (Tecumseh, Eco-Friendly Refrigerant R404A/R23) |
| Controller | TEMI Touchscreen HMI (Korea) |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Inner Chamber Material | Mirror-Finished Stainless Steel (SUS304) |
| Outer Chamber Material | Powder-Coated Steel or Stainless Steel |
| Safety Protections | Compressor Overheat/Overcurrent/High-Pressure, Dry-Burn Prevention, Over-Temperature Alarm, Low-Water Level Alert, Circuit Isolation for Humidification Lines |
| Power Supply | 3φ5W 380 VAC ±10 % or 2φ3W 220 VAC ±10 % |
| Standard Accessories | Fluorescent Illuminated Viewing Window, φ50 mm Cable Port (Left Side), Two Adjustable Sample Racks, Castor Wheels, Integrated Water Reservoir (Rear-Mounted) |
| Optional | RS-485 Interface, Data Logger, Inner Glass Door with Glove Ports |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TC-1000-70-10 |
| Instrument Type | Upright Vertical Chamber |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ±1 % |
| Temperature Stability | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Humidity Stability | ±1 %RH |
| Heating Rate | 1–25 °C/min (linear or non-linear ramping) |
| Interior Dimensions | Customizable |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TH-1000-20 |
| Instrument Type | Benchtop |
| Humidity Range | 20–98% RH |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Deviation | ±3.0% RH (<75% RH) |
| Heating Rate Options | 5, 10, 15, 20, or 25 °C/min (linear or non-linear ramp profiles) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TH-1000-20 |
| Instrument Type | Upright Chamber |
| Temperature Range | -70 to +150 °C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | ±2.0 °C |
| Humidity Uniformity | ±3% RH |
| Humidity Fluctuation | ±2.0% RH |
| Heating Rate | 1–25 °C/min (linear or non-linear ramp) |
| Internal Chamber Dimensions | 1000 × 1000 × 1000 mm (W × D × H) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | TH-1000-7 |
| Instrument Type | Benchtop |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ≤ 2.0 °C |
| Temperature Fluctuation | ±2.0 °C |
| Humidity Uniformity | ±3 %RH |
| Humidity Fluctuation | ±2.0 %RH |
| Heating Rate | 1–25 °C/min (linear or non-linear profile) |
| Internal Chamber Dimensions | 1000 mm × 1000 mm × 1000 mm |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TH-180-5 |
| Instrument Type | Benchtop |
| Humidity Range | 20–98% RH |
| Temperature Fluctuation | ±0.5°C |
| Humidity Deviation | ±3.0% RH (<75% RH) |
| Heating Rate Options | 5, 10, 15, 20, or 25°C/min (linear or non-linear profile) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TH-600-12 |
| Instrument Type | Benchtop |
| Humidity Range | 20–98% RH |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Deviation | ±3.0% RH (at <75% RH) |
| Heating Rate Options | 5, 10, 15, 20, or 25 °C/min (linear or non-linear profile) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TH-600-14 |
| Price Range | USD 1,400 – 7,000 (FOB) |
| Instrument Type | Vertical |
| Humidity Range | 20–98% RH |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Deviation | ±3.0% RH (<75% RH) |
| Heating Rate Options | 5, 10, 15, 20, or 25 °C/min (linear or non-linear profile) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | Hongzhan Technology Co., Ltd. |
| Type | Upright |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ≤ ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Humidity Stability | ±2.0 %RH |
| Heating Rate | ~3 °C/min |
| Internal Chamber Dimensions (W×D×H) | 800 × 950 × 800 mm |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | Hongzhan Technology Co., Ltd. |
| Type | Upright |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Humidity Stability | ±2.0 %RH |
| Heating Rate | 1–25 °C/min (linear or non-linear) |
| Internal Chamber Dimensions | 800 × 950 × 800 mm (W × H × D) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | Hongzhan Technology Co., Ltd. |
| Type | Upright |
| Model | TH-800-15 |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ≤ ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Humidity Stability | ±2.0 %RH |
| Ramp Rate | 1–25 °C/min (linear or non-linear) |
| Internal Chamber Dimensions | 1000 × 1000 × 800 mm (W × D × H) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | THC-150 |
| Power Supply | AC 3~380 V / 50 Hz |
| Rated Power | 6.0 kVA |
| Internal Dimensions | 500 × 500 × 500 mm |
| Temperature Range | 5–50 °C |
| Humidity Range | 30–95 %RH |
| Max. Temp. Error (10–40 °C) | ±0.3 °C |
| Max. RH Error (30–80 %RH) | ±2 %RH |
| Temp. Uniformity | ≤0.3 °C |
| RH Uniformity | ≤1.0 %RH |
| Temp. Stability | ±0.2 °C |
| RH Stability | ±0.8 %RH (at 20 °C) |
| Observation Window | 400 × 400 mm (triple-side + rear wide-view) |
| Heating Power | 2 kW |
| Steam Generator Power | 3 kW |
| Refrigeration Capacity | 1.5 kW |
| Compressor Power | 400 W |
| Refrigerant | R22 (500 g) |
| Weight | 230 kg |
| External Dimensions | 750 × 850 × 1600 mm |
| Safety Compliance | EN 60519-2 (Thermal Safety Class 2), JJG205–2005 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | UK-80 to UK-800 / SK-80 to SK-800 |
| Price | Upon Request |
| Temperature Range | –70 °C to +150 °C |
| Rapid Transition Range | –55 °C to +90 °C |
| Max Ramp Rate | 15 °C/min (linear) / 20 °C/min (non-linear) |
| Humidity Range | 20–98% RH (optional down to 5% RH with dehumidification module) |
| Temp Uniformity | ±0.5 °C |
| Temp Deviation | ≤ ±1.0 °C (≤100 °C), ≤ ±1.5 °C (>100 °C) |
| Humidity Uniformity | ±3.0% RH (>75% RH), ±5.0% RH (≤75% RH) |
| Humidity Stability | ±2.5% RH |
| Internal Volume | 80–800 L |
| Control System | TFT Color Touchscreen UMC1200 Controller (LabCompanion Custom Firmware) |
| Compliance | GB/T 10586, GB/T 10589, GB/T 10592, GB/T 2423.1, GB/T 2423.3, GB/T 2423.4, GB/T 2423.34, IEC 60068-2-1 (Test A), IEC 60068-2-2 (Test B), IEC 60068-2-14 (Test N), MIL-STD-810D Method 502.2 & 507.2, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | UP-150 |
| Pricing | Available Upon Request |
| Temperature Range (Standard Config) | –40°C to +100°C (Optional: –70°C to +150°C) |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ≤2°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Fluctuation | ±2–3% RH |
| Heating/Cooling Rate | 0.7–1°C/min (Optional: 3/5/10°C/min) |
| Internal Chamber Dimensions (W×D×H) | 500×600×500 mm |
| External Dimensions (Approx. W×D×H) | 960×1610×980 mm |
| Refrigeration System | Dual-stage cascade refrigeration |
| Compressor | HERMETIC TECUMSEH (France) |
| Humidification Method | Electric steam generator + saturated chamber humidification |
| Control System | TEMI 990 programmable controller (Korean) / SHIMADEN (Japan) / Honeywell (USA) optional |
| Sensor | PT100 platinum resistance thermometer |
| Safety Protections | Over-temperature cut-off, leakage current protection, high-pressure compressor shutdown, fast-acting fuse |
| Standard Accessories | Double-layer tempered glass observation window (220×180 mm), Ø50 mm test port, two stainless steel sample shelves, LED interior lighting |
| Power Supply | 220 V AC / 380 V AC, 50 Hz |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | UP-225U |
| Temperature Range | −60 °C to +150 °C |
| Humidity Range | 20–98% RH (optional dehumidification to ≤5% RH) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Accuracy | ±0.3 °C |
| Humidity Accuracy | ±2.5% RH |
| Internal Dimensions (W×D×H) | 500 × 750 × 600 mm |
| Controller | Japanese ETAC820 Touchscreen Programmable Controller (1000 programmable steps, multi-pattern sequencing, auto-recovery after power interruption) |
| Cooling System | Hermetically sealed compressor with eco-friendly refrigerant |
| Air Circulation | Optimized horizontal forced-air system with adjustable baffles for uniform thermal/hygrometric distribution |
| Compliance | GB/T 10586, GB/T 10592, GB/T 2423.1/3/4/34, IEC 60068-2-1/-2/-14, MIL-STD-810D, GJB 150.9 |